Quick Start Guide RX4-1500 Wi-Fi6 Router
Quick Start Guide
RX4-1500
Wi-Fi6 Router
VANIN
Website :
Email : Support@
LED Status Indicators
LED indicator
Status
Solid on
Before Setting
Description
The router is starting to connect or has been successfully connected
to the internet.
Green LED Indicator
Fast blinking
To customize your wireless network
connection and other advanced repeater
settings, please go to
Support/
The router is performing WPS negotiation
to download RX4-1500 updated Firmware
and User Guide for more information.
Ports / Buttons
WPS
To start the WPS negotiation process of the router
RST
To reset the router
LAN 1. 2. 3. 4
WAN Port
POWER
WPS
2.4G
Description
Operating Conditions
Working Temperature: 0~45¡ãC / 32~113¡ãF
Working Humidity: 10%~90% RH
To connect to the wired devices such as computers, switches, ect
(No condensation)
To conncet this router to the internet
Storage Temperature:-40~85¡ãC / -40~185¡ãF
To connect to the power cord
Storage Humidity: 5%~95% RH
5G
Power
(No condensation)
Step 1: Basic Installation
Modem
Step 2: Connect Your Router
2. Basic connection - WPS Button
1. Basic connection - Wirelessly
Wireless devices that support WPS, including Android phones, tablets,
and most USB network adapters, can be connected to your router
through this method.
¢Ù Find the SSID (Network Name) Juplink-RX4-1500_5G or
Juplink-RX4-1500 on phone or computer
Apower Outlet
Computer
Smart Device
WLAN
Juplink-RX4-1500
Juplink-RX4-1500_5G
Back of your router view
WLAN
Juplink-RX4-1500
AC-DC Power cord
Juplink-RX4-1500_5G
Ethernet WAN in
Internet
Front Panel LED Green
Modem LAN out
Juplink-RX4-1500_5G
¢Ù Tap the WPS icon on the device¡¯s
¢Ú Within two minutes, press the button on your router.
Juplink-RX4-1500
Juplink Wi-Fi 6 Router
Please ensure that the router has been turned on and connected to the Internet Service Provider(ISP)
¢Ù Connect the power adapter to the router¡¯s power port and plug the other end into a power outlet. The LED indicator becomes solid green
¢Ú Connect the WAN port of the router to a LAN port of your modem
POWER
WPS
2.4G
5G
¢Û Connect your device to the router.
¢Ú Click the network icon of your device or go to Wi-Fi Settings of your
smart device, and then select the SSID Juplink-RX4-1500_5G or
Juplink-RX4-1500 to join the network.
Ensure that Mobile Data ( if any ) is disabled.
Step 3: Log In to Your Router
¢Ù Lauch a web browser on the device which has been connected
to the repeater,Enter 192.168.0.1 in the address bar to log in.
Step 4: Set up Internet Connection
Method 1 : Connect to the Internet Automatically
Note : ¢Ù WPS is not supported by iOS devices.
¢Ú The WPS function cannot be configured if the wireless function
of the router is disabled. Also, the WPS function will be disabled if
your wireless encryption is WEP. Please make sure the wireless
function is enabled and is configured with the appropriate
encryption before configuring the WPS.
Method 2 : Connect to the Internet - PPPoE
¢Ù Select PPPoE type from the Addressing Type drop-down list
¢Û Confirm your WiFi name and password and click OK button
¢Ù Select DHCP type from the Addressing Type drop-down list
¢Ú Username:admin / Passwrod:admin
Login 192.168.0.1 Juplink RX4-1500 router
Username
admin
Password
admin
Cancel
Login
¢Ü The router will reboot and you can reconnect by using the new
Wi-Fi Name ( SSID ) and new password in 10 Seconds.
POWER
¢Û Click Login Button below
¢Ú Set 2.4G /5G SSID ( Wi-Fi Name ) and
2.4G /5G SSID Network Key ( Wi-Fi password ) then click Continue
Step 5: 2.4G Network Setting
Step 6: 5G Network Setting
¢Ú Enter the Username and Password provided by your ISP.
¢Ú Set 2.4G /5G SSID ( Wi-Fi Name ) and
2.4G /5G SSID Network Key ( Wi-Fi password ) then click Continue
What¡¯
s in the Box
¢Ù Select Network then select 2.4G setting.
¢Ù Select Network then select 5G setting.
1 x Juplink RX4-1500 Router
¢Ú You can modify your Wi-Fi Name (SSID) , Wi-Fi Password (Key)
Authentication Mode and Encryption Mode
¢Ú You can modify your Wi-Fi Name (SSID) , Wi-Fi Password (Key)
Authentication Mode and Encryption Mode
1 x Ethernet Cable
1 x AC-DC Adapter
1 x Quick Start Guide
Manufacturer¡¯s information
Nanjing Juplink Intelligent Technologies Co.,Ltd.
Address: No. 757 Dixiu Road, Binjiang Economic Development Zone
Jiangning District, Nanjing Technical
Support Email: Support@
Made in China
POWER
WPS
2.4G
5G
¢Û After click Apply/Save Button, The router will reboot and you can
reconnected by using the new SSID and New Key (Password)
¢Û After click Apply/Save Button, The router will reboot and you can
reconnected by using the new SSID and New Key (Password)
WPS
2.4G
5G
Note: Generally, the addressing type is DHCP. If it is PPPOE,
you need to fill in the username and password which
was provided by your ISP
Please refer to
Method 2: Connect to the Internet - PPPoE
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- how to get ipc mjpeg stream via http commands
- web services security usernametoken profile
- semi industrial lorawan gateway milesight iot
- second midtermfor ece374 04 08 15 solution
- manual cambium networks
- freepbx appliance setup guide
- cisco cli sg550xg 2 1 0 x cisco
- cloud infrastructure management interface cimi model and
- gds3710 firmware release notes table of content
- administrator s manual audiocodes
Related searches
- quick start budget worksheet
- sba quick reference guide 2019
- quick start up business loans
- dave ramsey quick start budget form
- python quick reference guide pdf
- python quick start guide
- quick reference guide template word
- microsoft teams quick start pdf
- quick start guide iphone 11
- amazon fba quick start guide
- concur expense quick start guide
- dave ramsey quick start budget