Data sheet DIN EN ISO 6931-1 Grade AISI 302 / EN 1
Data sheet DIN EN ISO 6931-1 Grade AISI 302 / EN 1.4310
Grade AISI 302 / 1.4310 is an austenitic stainless steel with a high content of chromium and nickel. A typical application for this stainless steel grade is the industrial production of springs. The material AISI 302 / 1.4310 is suitable for cold forming and owns good polishing qualities. Please note that the magnetizability changes due to cold forming.
Chemical composition (% by mass according to DIN EN ISO 6931-1 for EN 1.4310)
C
Si
0,05 ? 0,15 2,00
Mn
P
S
N
Cr
Cu
2,00
0,045 0,015
0,10 16,0 ? 19,0
-
Mo
Ni
Ti
0,80 6,0 ? 9,5
-
Other -
Specification
EN-grade EN-short name EN-standard AISI B.S. JIS Microstructure
1.4310 X10CrNi18-8 ISO 6931-1 302 * 970, 2096 * G4303 * austinite
Physical properties
Magnetizability
low
Density(kg/dm?)
7,9
Thermal conductivity (up to 20?C)
15
Electronic resistance at
room temperature (in mm?/m)
0,73
Possible fields of application
automobile industry chemical industry electrical components production of springs food industry mechanical engineering and more
Mechanical properties at room temperature in solution annealed condition (according to EN ISO 6931-1 for EN 1.4310)
?
in mm 40
Hardness
in HB 230
Yield strength
Rp0,2 in Mpa
Rp1,0 in Mpa
195
230
Tensile strength
Rm in Mpa 500-750
Elongation
A in% 40
40
230
195
230
500-750
40
Yield strength at elevated temperature in solution annealed condition (according to EN ISO 6931-1 for EN 1.4310)
Temperature in ?C
100
150
200
250
300
350
400
450
500
550
Rp0,2 in Mpa
210
200
190
185
180
180
-
-
-
-
Rp1,0 in Mpa
230
215
205
200
195
195
-
-
-
-
AGST Draht & Biegetechnik GmbH | Overather Str. 118 | 51766 Engelskirchen | Germany Tel. +49 (2263) 9240-0 | Fax +49 (2263) 9240-22 | agst.de | agst@agst.de
(* in accordance with)
Data sheet DIN EN ISO 6931-1 Grade AISI 302 / EN 1.4310
Heat treatment and hot forming
Solution heat treatment (cooling by air or water)
Hot forming (cooling by air)
1000-1100 ?C 1200-900 ?C
Welding
Since the stainless steel material 1.4310 / AISI 302 is a stainless spring steel wire, this stainless steel material cannot be welded or only with great effort. The very poor welding properties of the material 1.4310 / AISI 302 are primarily due to the high carbon content.
If you have further questions about this or any other product, please contact our team at +49 2263-9240-0 or email agst@agst.de
Please note: The information given in this data sheet has been compiled to the best of our knowledge and is based on the current version of the relevant standard. It is considered for reference only and we assume no liability for any errors.
AGST Draht & Biegetechnik GmbH | Overather Str. 118 | 51766 Engelskirchen | Germany Tel. +49 (2263) 9240-0 | Fax +49 (2263) 9240-22 | agst.de | agst@agst.de
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- mad mr 08 11 medicaid general provider policies eff 9 15 08 general
- aci 302 1r 15 guide to concrete floor and slab construction
- change type 302 1 302 1 general occupancy
- table r302 1 1 exterior walls sbcc
- chapter 302 medicaid general provider policies
- california judges benchguide 302
- etsi en 302 571 v2 1 1 2017 02 etsi en 302 571 v2 0 0 2016 03
- etsi en 302 065 1 v2 1
- ads chapter 302 usaid direct contracting
- 302 r 5 district residential 5 units per acre 302 1 intent and purpose