Kussmaul Electronics
|091-9-12V-1000-194A |Pump Plus 1000 System, w/ Status Center |
AIR COMPRESSOR, BATTERY CHARGER, DISPLAY – 12VOLT PUMP PLUS
A Kussmaul air compressor and battery charger package Model #091-9-12V-1000-194A shall be installed. The Auto Pump 12 volt driven air compressor shall ensure that the air brake system is properly pressurized for immediate response of the unit. A pressure switch shall regulate operation and shall automatically sense low air pressure in the brake system and restore the proper pressure. The unit shall have no interference with the vehicle mounted air compressor. The compact compressor shall have sealed bearings and a 15 amp circuit breaker installed in pressure switch assembly. The air compressor power mode selector switch shall select: 1) DC power full time from vehicle battery 2) AC powered only from the battery when vehicle is plugged into shore power and automatically shuts off air compressor when disconnected from shore power.
The air compressor shall have the following ratings:
1) 100 PSI maximum rating
2) Pre-set at 75 PSI “ON” and 95 PSI “OFF”
3) Adjustable differential range of 20 PSI to 100 PSI
4) Output:
0.30 SCFM @ 80 PSI
0.35 SCFM @ 60 PSI
5) Rating: 12 volt at 11 amps
The 15 amp battery charger and 3 amp Battery Saver shall be a Kussmaul Pump Plus #1000 Series and shall include a Model #091-194A-IND digital Status Center. The unit shall provide LED digital voltage and amperage readout. The right side of the display shall have a five segment bar graph indicating output current. The left side of the display shall have four (4) LED color coded lights shall indicate battery condition.
The Battery Saver component shall eliminate drain on vehicle’s battery system when in vehicle is not in use. The system shall automatically disconnect auxiliary vehicle loads from battery when the charger is energized.
The charger shall have the following operational specifications:
a) 120 volts AC input at 3.5 amps
b) 12 volts DC output at 15 amps
c) Battery Saver: 3 amps 12 volt DC output
d) AC power applied light on front panel
e) Battery Saver circuit overloaded
f) Dimensions of: 9.35” high x 5.9” wide x 4.725” deep and weighs 17 lbs.
The battery charger shall supply a ‘single battery bank’ with automatic operation and with an aluminum enclosure. The system shall have a built-in sense circuit to check battery voltage 120 times a second; the system shall compensate for voltage drop in charging wires and provide quick recharging with no overcharging. The unit shall include front panel connections for a remote display.
[pic][pic][pic]
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- trouble shooting the yardmaster 1000 12 24 72 volt
- kussmaul electronics
- emergency power system alte store
- chem 1b test review 3 berkeley city college
- electrical principles and technologies
- viking access systems
- batteries and converters
- sample 5 starter diagnosis advanced
- charging and maintaining multiple batteries
Related searches
- trending electronics 2019
- popular electronics 2019
- top trending electronics 2019
- effects of electronics on children
- hottest electronics 2019
- electronics calculator app
- where to buy electronics cheap
- new electronics 2019
- best electronics 2019
- best electronics to buy
- most popular electronics 2019
- popular electronics 2018