AutoDome 700 Series IP PTZ Camera - GfK Etilize

AutoDome 700 Series IP PTZ Camera

VG5 700 Series

en User Manual

AutoDome 700 Series IP PTZ Camera

Table of Contents

1

Getting Started

1.1

Powering On

1.2

Establishing AutoDome Control

2 2.1 2.2 2.3 2.4 2.4.1 2.5 2.5.1 2.6 2.7 2.8

Using the AutoDome 700 Series Overview of Features System Requirements Connecting the AutoDome 700 Series to the PC Configuring the AutoDome 700 Series Camera Changing the Network Settings The Livepage Entering a Keyboard Control Command Saving Snapshots Recording Video Sequences Processor Load

3 3.1 3.1.1 3.1.2 3.1.3 3.1.4 3.1.5

VG5 Audio Connections Audio Line Input Specifications Wire Specifications Connections Activating Audio Reception Enabling Audio Transmission Configuring Gain (optional)

4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21

Configuring the AutoDome 700 Series Basic Mode: Device Access Basic Mode: Date/Time Basic Mode: Network Basic Mode: Encoder Basic Mode: Audio Basic Mode: Recording Basic Mode: System Overview Advanced Mode: General Identification Password Date/Time Display Stamping Advanced Mode: Web Interface Appearance Livepage Functions Logging Advanced Mode: Camera Installer Menu Encoder Profile Encoder Streams Privacy Masks

Bosch Security Systems, Inc.

User Manual

Table of Contents | en 3

5 5 5

6 6 6 7 8 8 10 13 14 14 14

15 15 15 15 16 17 17

18 19 19 20 21 22 22 22 22 22 23 24 25 26 26 27 28 28 28 28 31 32

F.01U.215.777 | 1.0 | 2011.07

4 en | Table of Contents

4.22 4.23 4.24 4.25 4.26 4.27 4.28 4.29 4.30 4.31 4.32 4.33 4.34 4.35 4.36 4.37 4.38 4.39 4.40 4.41 4.42 4.43 4.44 4.45 4.46 4.47 4.48 4.49 4.50 4.51 4.52 4.53 4.54 4.55 4.56

5 5.1 5.2 5.3

6

Camera Settings Lens Settings PTZ Settings Diagnostics Preposition and Tours Sectors Miscellaneous Logs Audio Advanced Mode: Recording Storage Management Recording Profiles Retention Time Recording Schedule Recording Status Advanced Mode: Alarm Alarm Connections VCA Audio Alarm Alarm E-Mail Alarm Task Editor Alarm Rules Advanced Mode: Interfaces Alarm Inputs Relay Advanced Mode: Network Network Access Advanced Multicast FTP Posting Encryption Advanced Mode: Service Maintenance Licenses System Overview

Troubleshooting Guide VG5 AutoDome Operation and Control VG5 700 Series AutoDome Video and Control VG5 Series AutoDome Audio

User Command Table

Index

F.01U.215.777 | 1.0 | 2011.07

User Manual

AutoDome 700 Series IP PTZ Camera

33 35 36 36 37 38 38 38 38 39 39 41 42 42 43 44 44 46 49 50 51 51 52 52 52 52 52 55 56 57 58 58 58 59 59

60 60 61 61

64

65

Bosch Security Systems, Inc.

AutoDome 700 Series IP PTZ Camera

Getting Started | en 5

1

1.1

Getting Started

Install and wire the AutoDome according to the VG5 AutoDome Installation Manual. A typical system includes an ethernet connection, a video management system, a monitor, and appropriate wiring connections. Please refer to the individual product manuals for complete installation and setup instructions for each of the system components.

Powering On

When you turn the AutoDome power on there is a ten (10) second pause before the dome starts its homing phase. During the homing phase the camera pans left and right and tilts up and down. It also adjusts the lens focus. The entire homing phase lasts approximately 40 seconds and ends with a firmware version screen.

Bosch Security Sys. AutoDome

700 Series

5.00.00.03/1.05.00.02

Day/Night 36X

1.00.00.00

SC Boot FPGA Lang. Table VCA_boot IP-Panel IP Address Subnet Mask No Heater

5.00.00.03 1.13.01.05 1.00.00.01 1.02.00.01 4.53.50.13 192.169.0.0 255.255.248. 0

FastAddress: Not Set

1.2

Figure 1.1 Sample VG5 Startup Firmware Version Screen

The splash screen displays the type of AutoDome, the camera installed, the firmware levels for various files, and the current IP address (for VG5 AutoDome 700 Series models).

Establishing AutoDome Control

The most common ways to interface with the AutoDome are: ? Using the Bosch IP Web interface included with VG5 AutoDome 700 Series models. Refer

to Section 2 Using the AutoDome 700 Series, page 6. ? Using the Bosch Video Management System (VMS) or the Bosch Video Client. ? Using the Bosch Configuration Manager to configure camera settings.

Bosch Security Systems, Inc.

User Manual

F.01U.215.777 | 1.0 | 2011.07

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download