EasyIO IT Network Document - Microsoft

EasyIO IT Network v1.0

EasyIO IT Network Document

1

EasyIO IT Network v1.0 Document Change Log 16th May 2014 Document created.

2

EasyIO IT Network v1.0

Table of Contents

IT Network ......................................................................................................................................................4 1) EasyIO IP controllers default IPv4 address. ........................................................................................4 2) EasyIO IP controllers default IPv6 address. ........................................................................................4 3) EasyIO FG+ series controllers protocols and default ports used........................................................4 4) EasyIO FS series controllers protocols and default ports used. .........................................................5 5) EasyIO FW series controllers protocols and default ports used. .......................................................6 6) Sedona Protocol Connection (SOX) ....................................................................................................7 7) SSH, SFTP and FTP Protocols .............................................................................................................7 8) SSH, SFTP and FTP Protocols .............................................................. Error! Bookmark not defined.

3

EasyIO IT Network v1.0

IT Network

1) EasyIO IP controllers default IPv4 address.

Model

IP address

Subnet Mask

Default Gateway

FG+ Series FS Series FW series

192.168.10.11 192.168.10.12 192.168.10.30

255.255.255.0 255.255.255.0 255.255.255.0

192.168.10.1 192.168.10.1 192.168.10.1

DHCP Support

No Yes Yes

2) EasyIO IP controllers default IPv6 address.

Model

IP address

Subnet Mask

Default Gateway

FG+ Series FS Series

FW series

Not supported Supported.

Disable by default Supported.

Disable by default

Not supported Supported.

Disable by default Supported.

Disable by default

Not supported Supported.

Disable by default Supported.

Disable by default

DHCP Support

No Yes

Yes

3) EasyIO FG+ series controllers protocols and default ports used.

Function

Sedona (sox)

CPT graphics deployment

Micro SD card (if a micro SD card is insert )

CPT graphics login via web browser

CPT RESTful HTTP API

BACnet Protocol Modbus TCP TCom Network Time

Port 1876

21 (FTP)

21 (FTP)

80 (HTTP only)

1001

47808 502 5021 37

Type UDP

TCP

TCP

TCP

UDP

UDP TCP UDP TCP

Username admin

webuser

sdcard

admin

admin

-

Default Password No password (Leave it blank) 123456

123456

hellocpt

hellocpt

4

Remarks

Sedona sox protocol. Used for programming the EasyIO controllers. Recommend to create a password after commissioning is complete. Default port can be change as well via CPT Tools Credentials for CPT graphics deployment. Password can be change after a full deployment done. Password is changed via web browser. Credentials for CPT graphics deployment. Password can be change after a full deployment done. Password is changed via web browser. Credentials for CPT web graphics. Password can be change after a full deployment done. Password is changed via web browser. Credentials for CPT web graphics. Password can be change after a full deployment done. Password is changed via web browser. BACnet protocol UDP port Modbus TCP protocol port Tridium Niagara Framework Integration Network Time Protocol . NTP.

EasyIO IT Network v1.0

Protocol Client SMTP

EasyIO Peer to Peer

Time sync service.

User define TCP User Email User email SMTP supports SSL email servers.

account account

name password

6061

UDP

-

-

EasyIO proprietary peer to peer protocol.

Network Broadcast is used to notify all connected

controllers.

4) EasyIO FS series controllers protocols and default ports used.

Function Sedona (sox)

CPT graphics deployment

Micro SD card (if a micro SD card is insert )

SSH

CPT graphics login via web browser CPT RESTful HTTP API

BACnet Protocol Modbus TCP TCom Network Time Protocol Client SMTP

EasyIO Peer to Peer

Port 1876

21 (FTP)

21 (FTP)

22 (SFTP)

80 (HTTP) 443 (HTTPS)

1001

47808 502 5021 37

User define

6061

Type UDP

TCP

TCP

TCP

TCP

UDP

UDP TCP UDP TCP TCP UDP

Username admin

webuser

easyio

easyio

admin

admin

User Email account name -

Default Password No password (Leave it blank) 123456

123456

123456

hellocpt

hellocpt

User email account password -

5

Remarks

Sedona sox protocol. Used for programming the EasyIO controllers. Recommend to create a password after commissioning is complete. Default port can be change as well via CPT Tools Credentials for CPT graphics deployment. Password can be change after a full deployment done. Password is changed via web browser. Service can be turn OFF by user. Credentials for CPT graphics deployment. Password can be change after a full deployment done. Password is changed via web browser. Service can be turn OFF by user. Credentials for CPT graphics deployment. Password can be change after a full deployment done. Password is changed via web browser. Service can be turn OFF by user. Credentials for CPT web graphics. Password can be change after a full deployment done. Password is changed via web browser. Credentials for CPT web graphics. Password can be change after a full deployment done. Password is changed via web browser. BACnet protocol UDP port Modbus TCP protocol port Tridium Niagara Framework Integration Network Time Protocol . NTP. Time sync service. SMTP supports SSL email servers.

EasyIO proprietary peer to peer protocol. Network Broadcast is used to notify all connected controllers.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download