Gas Leak Detection using MS1000 - Kongsberg

Operator manual

Gas Leak Detection using MS1000

901-10017004 / 1.0

Gas Leak Detection Using MS1000

Operators Manual

Version

Version 1.0

Document revisions

Date

Written by

Checked by

22-10-12

AZ

BC

Approved by BC

About this document

The information contained in this document is subject to change without prior notice. Kongsberg Mesotech Ltd. shall not be liable for errors contained herein, or for incidental or consequential damages in connection with the furnishing, performance, or use of this document.

? 2012 Kongsberg Mesotech Ltd. All rights reserved. No part of this work covered by the copyright hereon may be reproduced or otherwise copied without prior permission from Kongsberg Mesotech Ltd.

Gas Leak Detection System using MS1000 / Operators Manual

Table of contents

1 0BINTRODUCTION ........................................................................................................ 1 1.1 Gas Leak Detection using MS100 Overview ......................................................... 1

2 0BCONFIGURE THE SYSTEM..................................................................................... 2 2.1 Configure the TCP/IP ............................................................................................. 2 2.1.1 51BConfigure the Ethernet Heads ......................................................................... 3 2.1.2 Configure the MS1000 Processor.................................................................... 7

3 0BRUN THE HSH SYSTEM ........................................................................................... 9 3.1 Before starting MS1000 .......................................................................................... 9 3.1.1 Enable/Disable Auto-Recording...................................................................... 9 3.1.2 Set Delay-Startup............................................................................................. 9 3.2 Enable Sequential Operation ................................................................................ 10 3.3 Enable the Gas Leak Alarm .................................................................................. 11 3.4 Gas Leak Monitor operation mode ....................................................................... 14 3.5 Gas Leak Alarm logging and reporting ................................................................ 14

IV

901-10017004/1.0

?2012, Kongsberg Mesotech Ltd.

Document history

Draft 0.1

Draft 0.2 Draft 0.3

First draft Describes Ethernet installation procedures and MS1000 Gas Leak Detection function.

Describes enabling gas leak alarm, the configuration of the sequential operation.

Decoupled gas leak detection function and the sequential operation function.

Added DelayStartup field in the DefaultConfig.ini file, used in high latency network to wait for the head TCP/IP connection.

Feedback

To assist us in making improvements to the product and to this manual, we welcome comments and constructive criticism. Please send all such ? in writing or by Email to:

Kongsberg Mesotech Ltd. Product Group 1598 Kebet Way Port Coquitlam, BC, Canada V3C 5M5

or Email:

alan.zhao@

901-10017004/1.0

V

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download