QuiCK iNSTALLATioN GuiDE

4G LTE Mobile Router DWR-933

QUICK INSTALLATION GUIDE

GU?A DE INSTALACI?N R?PIDA GUIA DE INSTALA??O R?PIDA PETUNJUK PEMASANGAN CEPAT

ENGLISH

CONTENTS OF PACKAGING

4G LTE Mobile Router DWR-933

BATTERY

USB CABLE TYPE A TO MICRO TYPE-A USB CABLE

If any of these items are missing from your packaging, please contact your reseller. Use of a battery other than the one included may cause damage or injury.

DWR-933

1

ENGLISH

PRODUCT SETUP

QUICK INSTALLATION

Step 1: Lift off the back cover by using the notch on the bottom.

Step 2: Remove the battery using the notch along the top edge of the battery bay

Step 3:

Slide the micro-SIM card bracket to the left until it clicks to unlock it,

then lift it open. Place your micro-SIM card in the tray with the notch

SIM

situated at the top-right, then close the bracket and slide it to the right

until it clicks to lock it in place.

Step 4:

If you want to insert a microSD card, push the microSD card bracket

SD

down until it clicks, then lift it open. Place the microSD card in the

indentation, then close the bracket and slide it up until it clicks to lock

it in place.

Step 5: Reinsert the battery and reattach the battery cover.

Step 6: Connect the USB cable and plug it into the USB port of a power adapter or a PC to charge the battery.

2

DWR-933

ENGLISH

CONFIGURATION

CONNECT YOUR DEVICE - VIA WIRELESS

Step 1: Turn on the DWR-933 by pressing and holding the power button until the "Welcome" message appears on the display.

Step 2: Connect your PC to one of the DWR-933's wireless networks. By default, the settings are:

2.4 GHz SSID: dlink_DWR-933-xxxx 5 GHz SSID: dlink_DWR-933-5G-xxxx Password: xxxxxxxxxx (xxxx is a 4 character code unique to your DWR-933) Step 3: Use a web browser to go to 192.168.0.1 to log in to the configuration interface. The default username is admin, and the password is admin.

CONNECT YOUR DEVICE - VIA USB CABLE

Step 1: Turn on the DWR-933 by pressing and holding the power button until the "Welcome" message appears on the display.

Step 2: Connect the DWR-933 to your PC using the USB cable. The device should install automatically on modern operating systems.

Step 3: Use a web browser to go to 192.168.0.1 to log in to the configuration interface. The default username is admin, and the password is admin.

DWR-933

3

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download