Shelby County Schools’ mathematics instructional maps are ...



Unit 1ModuleAug. 10- Sept. 7Unit 2ModuleSept.8-Nov. 3Unit 3Module Nov. 4-Dec. 8Unit 4ModuleDec. 9- Feb. 10Unit 5ModuleFeb. 13- Mar. 20Unit 6ModuleMar. 27- May 26Place Value and Decimal FractionsMulti-Digit Whole Number and Decimal Fraction OperationsAddition and Subtraction of FractionsMultiplication and Division of Fractions and Decimal FractionsAddition and Multiplication with Volume and AreaProblem Solving with the Coordinate Plane5.NBT.A.15.OA.A.15.NF.A.15.OA.15.NF.B.4b5.OA.A.25.NBT.A.25.OA.A.25.NF.A.25.OA.25.NF.65.OA.B.35.NBT.A.35.NBT.A.15.NBT.B.75.MD.C.35.G.A.15.NBT.A.45.NBT.A.25.NF.B.35.MD.C.45.G.A.25.NBT.B.75.NBT.B.55.NF.B.4a5.MD.C.55.MD.A.15.NBT.B.65.NF.B.55.G.B.35.NBT.B.75.NF.B.65.G.B.45.MD.A.15.NF.75.MD.15.MD.2Mathematics Grade 5Year at a Glance 2016-2017 Key:Major ClustersSupporting ClustersAdditional ClustersNote: Please use the suggested pacing as a guide.Use this guide as you prepare to teach a module for additional guidance in planning, pacing, and suggestions for omissions. Pacing and Preparation Guide (Omissions)IntroductionIn 2014, the Shelby County Schools Board of Education adopted a set of ambitious, yet attainable goals for school and student performance. The District is committed to these goals, as further described in our strategic plan, Destination2025. By 2025,80% of our students will graduate from high school college or career ready90% of students will graduate on time100% of our students who graduate college or career ready will enroll in a post-secondary opportunityIn order to achieve these ambitious goals, we must collectively work to provide our students with high quality, college and career ready aligned instruction. The Tennessee State Standards provide a common set of expectations for what students will know and be able to do at the end of a grade. College and career readiness is rooted in the knowledge and skills students need to succeed in post-secondary study or careers. The TN State Standards represent three fundamental shifts in mathematics instruction: focus, coherence and rigor. 457200262890000The TN Mathematics StandardsThe Tennessee Mathematics Standards: can access the Tennessee State standards, which are featured throughout this curriculum map and represent college and career ready learning at reach respective grade level.Mathematical Practice StandardsMathematical Practice Standards can access the Mathematical Practice Standards, which are featured throughout this curriculum map. This link contains more a more detailed explanation of each practice along with implications for instructions.The Standards for Mathematical Practice describe varieties of expertise, habits of minds and productive dispositions that mathematics educators at all levels should seek to develop in their students. These practices rest on important National Council of Teachers of Mathematics (NCTM) “processes and proficiencies” with longstanding importance in mathematics education. -571500457200Throughout the year, students should continue to develop proficiency with the eight Standards for Mathematical Practice.This curriculum map is designed to help teachers make effective decisions about what mathematical content to teach so that, ultimately our students, can reach Destination 2025. To reach our collective student achievement goals, we know that teachers must change their practice so that it is in alignment with the three mathematics instructional shifts. Throughout this curriculum map, you will see resources as well as links to tasks that will support you in ensuring that students are able to reach the demands of the standards in your classroom. In addition to the resources embedded in the map, there are some high-leverage resources around the content standards and mathematical practice standards that teachers should consistently access:Purpose of Mathematics Curriculum MapsThis Map is meant to help teachers and their support providers (e.g., coaches, leaders) on their path to effective, college and career ready (CCR) aligned instruction and our pursuit of Destination 2025. It is a resource for organizing instruction around the TN State Standards, which define what to teach and what students need to learn at each grade level. The map is designed to reinforce the grade/course-specific standards and content—the major work of the grade (scope)—and provides suggested sequencing, pacing, time frames, and aligned resources. Our hope is that by curating and organizing a variety of standards-aligned resources, teachers will be able to spend less time wondering what to teach and searching for quality materials (though they may both select from and/or supplement those included here) and have more time to plan, teach, assess, and reflect with colleagues to continuously improve practice and best meet the needs of their students.The map is meant to support effective planning and instruction to rigorous standards. It is not meant to replace teacher planning, prescribe pacing or instructional practice. In fact, our goal is not to merely “cover the curriculum,” but rather to “uncover” it by developing students’ deep understanding of the content and mastery of the standards. Teachers who are knowledgeable about and intentionally align the learning target (standards and objectives), topic, text(s), task,, and needs (and assessment) of the learners are best-positioned to make decisions about how to support student learning toward such mastery. Teachers are therefore expected--with the support of their colleagues, coaches, leaders, and other support providers--to exercise their professional judgment aligned to our shared vision of effective instruction, the Teacher Effectiveness Measure (TEM) and related best practices. However, while the framework allows for flexibility and encourages each teacher/teacher team to make it their own, our expectations for student learning are non-negotiable. We must ensure all of our children have access to rigor—high-quality teaching and learning to grade level specific standards, including purposeful support of literacy and language learning across the content areas. Additional Instructional SupportShelby County Schools adopted our current math textbooks for grades K-5 in 2010-2011. ?The textbook adoption process at that time followed the requirements set forth by the Tennessee Department of Education and took into consideration all texts approved by the TDOE as appropriate. ?We now have new standards, therefore, the textbook(s) have been vetted using the Instructional Materials Evaluation Tool (IMET). This tool was developed in partnership with Achieve, the Council of Chief State Officers (CCSSO) and the Council of Great City Schools. The review revealed some gaps in the content, scope, sequencing, and rigor (including the balance of conceptual knowledge development and application of these concepts), of our current materials.?The additional materials purposefully address the identified gaps in alignment to meet the expectations of the CCR standards and related instructional shifts while still incorporating the current materials to which schools have access. ?Materials selected for inclusion in the Curriculum Maps, both those from the textbooks and external/supplemental resources (e.g., EngageNY), have been evaluated by district staff to ensure that they meet the IMET criteria.How to Use the MapsOverviewAn overview is provided for each quarter. The information given is intended to aid teachers, coaches and administrators develop an understanding of the content the students will learn in the quarter, how the content addresses prior knowledge and future learning, and may provide specific examples of student work.Tennessee State StandardsTN State Standards are located in the left column. Each content standard is identified as the following: Major Work, Supporting Content or Additional Content.; a key can be found at the bottom of the map. The major work of the grade should comprise 65-85% of your instructional time. Supporting Content are standards the supports student’s learning of the major work. Therefore, you will see supporting and additional standards taught in conjunction with major work. It is the teachers' responsibility to examine the standards and skills needed in order to ensure student mastery of the indicated standard. ContentTeachers are expected to carefully craft weekly and daily learning objectives/ based on their knowledge of TEM Teach 1. In addition, teachers should include related best practices based upon the TN State Standards, related shifts, and knowledge of students from a variety of sources (e.g., student work samples, MAP, performance in the major work of the grade) . Support for the development of these lesson objectives can be found under the column titled content. The enduring understandings will help clarify the “big picture” of the standard. The essential questions break that picture down into smaller questions and the learning targets/objectives provide specific outcomes for that standard(s). Best practices tell us that clearly communicating and making objectives measureable leads to greater student mastery.Instructional ResourcesDistrict and web-based resources have been provided in the Instructional Resources column. At the end of each module you will find instructional/performance tasks, i-Ready lessons and additional resources that align with the standards in that module. The additional resources provided are supplementary and should be used as needed for content support and differentiation. Vocabulary and FluencyThe inclusion of vocabulary serves as a resource for teacher planning, and for building a common language across K-12 mathematics. One of the goals for CCSS is to create a common language, and the expectation is that teachers will embed this language throughout their daily lessons. In order to aid your planning we have included a list of fluency activities for each lesson. It is expected that fluency practice will be a part of your daily instruction. (Note: Fluency practice is NOT intended to be speed drills, but rather an intentional sequence to support student automaticity. Conceptual understanding MUST underpin the work of fluency.)Grade 5 Quarter 2 OverviewModule 2: Multi- Digit Whole Number and Decimal Fraction OperationsModule 3: Place Value and Decimal FractionsModule 4: Multiplication and Division of Fractions and Decimal FractionsOverview Module 2 continues with students applying the patterns of the base ten system to mental strategies and the multiplication and division algorithms. Topics E through H provide a similar sequence for division. Topic E begins concretely with place value disks as an introduction to division with multi-digit whole numbers (5.NBT.6). 2095507048500321310023304500 In the same lesson, 420?÷?60 is interpreted as 420?÷?10?÷?6. Next, students round dividends and two-digit divisors to nearby multiples of 10 in order to estimate single-digit quotients (e.g., 431?÷?58?≈?420?÷?60?=?7) and then multi-digit quotients. This work is done horizontally, outside the context of the written vertical method. The series of lessons in Topic F lead students to divide multi-digit dividends by two-digit divisors using the written vertical method. Each lesson moves to a new level of difficulty with a sequence beginning with divisors that are multiples of 10 to non-multiples of 10. Two instructional days are devoted to single-digit quotients with and without remainders before progressing to two- and three-digit quotients (5.NBT.6).In Topic G, students use their understanding to divide decimals by two-digit divisors in a sequence similar to that of Topic F with whole numbers (5.NBT.7). In Topic H, students apply the work of the module to solve multi-step word problems using multi-digit division with unknowns representing either the group size or number of groups. In this topic, an emphasis on checking the reasonableness of their answers draws on skills learned throughout the module, including refining their knowledge of place value, rounding, and estimation. In Module 3, students’ understanding of addition and subtraction of fractions extends from earlier work with fraction equivalence and decimals. This module marks a significant shift away from the elementary grades’ centrality of base ten units to the study and use of the full set of fractional units from Grade 5 forward, especially as applied to algebra.1964690-95631000In Topic A, students revisit the foundational Grade 4 standards addressing equivalence. When equivalent, fractions represent the same amount of area of a rectangle and the same point on the number line. These equivalencies can also be represented symbolically. 1073153810007429518161023=2 × 43 × 4=812 023=2 × 43 × 4=812 Furthermore, equivalence is evidenced when adding fractions with the same denominator. The sum may be decomposed into parts (or recomposed into an equal sum). An example is shown as follows: 23=13+13 78=38+38+1862=22+22+22=1+1+1=385=55+35=135 73=63+13=2 ×33+13=2+13=213This also carries forward work with decimal place value from Modules 1 and 2, confirming that like units can be composed and decomposed. 5 tenths + 7 tenths = 12 tenths = 1 and 2 tenths5 eighths + 7 eighths = 12 eighths = 1 and 4 eighthsIn Topic B, students move forward to see that fraction addition and subtraction are analogous to whole number addition and subtraction. Students add and subtract fractions with unlike denominators (5.NF.1) by replacing different fractional units with an equivalent fraction or like unit.1 fourth + 2 thirds = 3 twelfths + 8 twelfths = 11 twelfths14+23=312+812=1112This is not a new concept, but certainly a new level of complexity. Students have added equivalent or like units since kindergarten, adding frogs to frogs, ones to ones, tens to tens, etc. 1 boy + 2 girls = 1 child + 2 children = 3 children1 liter – 375 mL = 1,000 mL – 375 mL = 625 mLThroughout the module, a concrete to pictorial to abstract approach is used to convey this simple concept. Topic A uses paper strips and number line diagrams to clearly show equivalence. After a brief concrete experience with folding paper, Topic B primarily uses the rectangular fractional model because it is useful for creating smaller like units by means of partitioning (e.g., thirds and fourths are changed to twelfths to create equivalent fractions as in the diagram below). In Topic C, students move away from the pictorial altogether as they are empowered to write equations clarified by the model. 14+23=1 × 34 × 3+2 × 43 × 4=312+812=1112 176403013970 Topic C also uses the number line when adding and subtracting fractions greater than or equal to 1 so that students begin to see and manipulate fractions in relation to larger whole numbers and to each other. The number line allows students to pictorially represent larger whole numbers. For example, “Between which two whole numbers does the sum of 1 34 and 535 lie?”98425-13081000353060135255____ < 134 + 535 < ____00____ < 134 + 535 < ____This leads to an understanding of and skill with solving more complex problems, which are often embedded within multi-step word problems: Cristina and Matt’s goal is to collect a total of 312 gallons of sap from the maple trees. Cristina collected 134 gallons. Matt collected 535 gallons. By how much did they beat their goal? 698509715500134+535-312=3+3 × 54 × 5+3 × 45 × 4-1 × 102 × 10 =3+1520+1220-1020=31720 Cristina and Matt beat their goal by 31720 gallons.Word problems are a part of every lesson. Students are encouraged to draw tape diagrams, which encourage them to recognize part–whole relationships with fractions that they have seen with whole numbers since Grade 1. In Topic D, students strategize to solve multi-term problems and more intensely assess the reasonableness of their solutions to equations and word problems with fractional units (5.NF.2). “I know my answer makes sense because the total amount of sap they collected is about 7 and a half gallons. Then, when we subtract 3 gallons, that is about 4 and a half. Then, 1 half less than that is about 4. 31720 is just a little less than 4.”Module 4 is where students learn to multiply fractions and decimal fractions and begin working with fraction division. Topic A opens the 38-day module with an exploration of fractional measurement. Students construct line plots by measuring the same objects using three different rulers accurate to 12, 14, and 18 of an inch (5.MD.2).Students compare the line plots and explain how changing the accuracy of the unit of measure affects the distribution of points. This is foundational to the understanding that measurement is inherently imprecise because it is limited by the accuracy of the tool at hand. Students use their knowledge of fraction operations to explore questions that arise from the plotted data. The interpretation of a fraction as division is inherent in this exploration. For measuring to the quarter inch, one inch must be divided into four equal parts, or 1 ÷ 4. This reminder of the meaning of a fraction as a point on a number line, coupled with the embedded, informal exploration of fractions as division, provides a bridge to Topic B’s more formal treatment of fractions as division.1182370116459000Topic B focuses on interpreting fractions as division. Equal sharing with area models (both concrete and pictorial) provides students with an opportunity to understand division of whole numbers with answers in the form of fractions or mixed numbers (e.g., seven brownies shared by three girls, three pizzas shared by four people). Discussion also includes an interpretation of remainders as a fraction (5.NF.3). Tape diagrams provide a linear model of these problems. Moreover, students see that, by renaming larger units in terms of smaller units, division resulting in a fraction is similar to whole number division.2057400401320 1 ÷ 7 = 77 ÷ 7 = 17 5 ÷ 3 = 53 1 ÷ 7 = 77 ÷ 7 = 17 5 ÷ 3 = 53Topic B continues as students solve real-world problems (5.NF.3) and generate story contexts for visual models. The topic concludes with students making connections between models and equations while reasoning about their results (e.g., between what two whole numbers does the answer lie?).In Topic C, students interpret finding a fraction of a set (34 of 24) as multiplication of a whole number by a fraction (34 × 24) and use tape diagrams to support their understandings (5.NF.4a). This, in turn, leads students to see division by a whole number as being equivalent to multiplication by its reciprocal. That is, division by 2, for example, is the same as multiplication by 12. Students also use the commutative property to relate a fraction of a set to the Grade 4 repeated addition interpretation of multiplication by a fraction. This offers opportunities for students to reason about various strategies for multiplying fractions and whole numbers. Students apply their knowledge of a fraction of a set and previous conversion experiences (with scaffolding from a conversion chart, if necessary) to find a fraction of a measurement, thus converting a larger unit to an equivalent smaller unit (e.g., 13 minutes = 20 seconds and 2 14 feet = 27 inches). Overview recapFocus Grade Level StandardType of RigorFoundational Standards5.OA.1ConceptualIntroductory5.OA.2Application5.OA.15.NBT.1Conceptual2.NBT.1, 4.NF.1, 4.NF.2, 4.NF.5, 4.NF.6, 4.NF.7, 4.NBT.15.NBT.2Conceptual4.NBT.1, 4.NF.5, 4.NF.6, 5.NBT.15.NBT.5Procedural Skill and Fluency3.NBT.2, 4.NBT.1, 3.NBT.1, 3.OA.5, 4.NF.5, 4.NF.6, 4.NBT.4, 4.NBT.5, 5.NBT.15.NBT.6Conceptual, Application3.NBT.2, 4.NBT.1, 3.OA.5, 3.OA.7, 4.NF.5, 4.NF.6, 4.NBT.5, 4.NBT,4, 4.NBT,6, 5.NBT.1, 5.NBT,5, 5.NBT.25.NBT.7Procedural Skill and Fluency3.NBT.2, 4.NBT.1, 4.NF.5, 4.NF.6, 4.NF.1, 4.NF.4, 3.NF.1, 3.OA.6, 4.NBT.4, 5.NBT.1, 5.F.1, 5.NF.4, 5.NF.7, 5.NF04279900Fluency NCTM PositionProcedural fluency is a critical component of mathematical proficiency. Procedural fluency is the ability to apply procedures accurately, efficiently, and flexibly; to transfer procedures to different problems and contexts; to build or modify procedures from other procedures; and to recognize when one strategy or procedure is more appropriate to apply than another. To develop procedural fluency, students need experience in integrating concepts and procedures and building on familiar procedures as they create their own informal strategies and procedures. Students need opportunities to justify both informal strategies and commonly used procedures mathematically, to support and justify their choices of appropriate procedures, and to strengthen their understanding and skill through distributed practice.Fluency is designed to promote automaticity by engaging students in daily practice. Automaticity is critical so that students avoid using lower-level skills when they are addressing higher-level problems. The automaticity prepares students with the computational foundation to enable deep understanding in flexible ways. Therefore, it is recommended that students participate in fluency practice daily using the resources provided in the curriculum maps. Special care should be taken so that it is not seen as punitive for students that might need more time to master fluency.The fluency standard for 5th grade listed below should be incorporated throughout your instruction over the course of the school year. The engageny lessons include fluency exercises that can be used in conjunction with building conceptual understanding. 5.NBT.B.5 Fluently multiply multi-digit whole numbers using the standard algorithm.Note: Fluency is only one of the three required aspects of rigor. Each of these components have equal importance in a mathematics curriculum. References: STATE STANDARDSCONTENTINSTRUCTIONAL RESOURCESVOCABULARY & FLUENCY Module 2 Multi-Digit Whole Number and Decimal Fraction Operations (Allow 2 weeks for instruction, review and assessment)Domain: Operations and Algebraic Thinking Cluster: Write and interpret numerical expressions. 5.OA.1 Use parentheses, brackets, or braces in numerical expressions, and evaluate expressions with these symbols. 5.OA.2 Write simple expressions that record calculations with numbers, and interpret numerical expressions without evaluating them. For example, express the calculation “add 8 and 7, then multiply by2” as 2x(8+7). Recognize that 3x(18932+ 921) is three times as large as 18932 + 921, without having to calculate the indicated sum or product.Domain: Number and Operations in Base TenCluster: Understand the place value system. 5.NBT.1 Recognize that in a multi-digit number, a digit in one place represents 10 times as much as it represents in the place to its right and 1/10 of what it represents in the place to its left. 5.NBT.2 Explain patterns in the number of zeros of the product when multiplying a number by powers of 10, and explain patterns in the placement of the decimal point when a decimal is multiplied or divided by a power of 10. Use whole-number exponents to denote power of 10.Domain: Number and Operations in Base TenCluster: Perform operations with multi-digit whole numbers and with decimals to hundredths. 5.NBT.5 Fluently multiply multi-digit whole numbers using the standard algorithm. 5.NBT.6 Find whole-number quotients of whole numbers with up to four-digit dividends and two-digit divisors, using strategies based on place value, the properties of operations, and/or the relationship between multiplication and division. Illustrate and explain the calculation by using equations, rectangular arrays, and/or area models. 5.NBT.7 Add, subtract, multiply, and divide decimals to hundredths, using concrete models or drawings and strategies based on place value, properties of operations, and/or the relationship between addition and subtraction; relate the strategy to a written method and explain the reasoning used.Domain: Measurement and DataCluster: Convert like measurement units within a given measurement system. 5.MD.1 Convert among different-sized standard measurement units within a given measurement system (e.g., convert 5 cm to 0.05 m), and use these conversions in solving multi-step, real world problems.Enduring UnderstandingsMultiplication is related to both addition and division. Computational fluency includes understanding not only the meaning but also the appropriate use of numerical operations.The magnitude of numbers affects the outcome of operations on them.Context is critical when using estimation.Essential QuestionsHow does multiplication relate to the other operations?What makes a computational strategy both effective and efficient?How does the size of the number affect the outcome of the operation?How can we decide when to use an exact answer and when to use an estimate?Learning Targets Topic FLesson 19: I can divide two- and three-digit dividends by multiples of 10 with single-digit quotients, and make connections to a written method.Lessons 20–21: I can divide two- and three-digit dividends by two-digit divisors with single-digit quotients, and make connections to a written method.Lessons 22–23: I can divide three- and four-digit dividends by two-digit divisors resulting in two- and three-digit quotients, reasoning about the decomposition of successive remainders in each place value.Module 2: Multi-Digit Whole Number and Decimal Fraction OperationsTopic F: Partial Quotients and Multi-Digit Whole Number Division HYPERLINK "" Lesson 19 HYPERLINK "" Lesson 20 HYPERLINK "" Lesson 21 HYPERLINK "" Lesson 22 HYPERLINK "" Lesson 23VocabularyConversion factor, Decimal fraction, Multiplier, ParenthesesFamiliar Terms and SymbolsDecimal, digit, divisor, equation, equivalence, equivalent, estimate, exponent, multiple, pattern, product, quotient, remainder, renaming, rounding, unit formFluency Practice:Please see engageNY full module download for suggested fluency pacing and activities. Lesson 19- Estimate and Divide ? Group Count by Multiples of 10? Group Count by Multi-Digit Numbers Lesson 20- Estimate and Divide ? Divide by Multiples of 10 with Remainders? Group Count by Multi-Digit Numbers Lesson 21- Group Count by Multi-Digit NumbersDivide by Two-digit NumbersLesson 22- Divide Decimals Group Count by Multi-Digit NumbersDivide by Two-digit NumbersLesson 23- Divide DecimalsRename Tenths and HundredthsDivide by Two-digit NumbersOther:Use this guide as you prepare to teach a module for additional guidance in planning, pacing, and suggestions for omissions.Pacing and Preparation Guide (Omissions)Topic GLesson 24: I can divide decimal dividends by multiples of 10, reasoning about the placement of the decimal point and making connections to a written method. (5.NBT.2, 5.NBT.7)Lesson 25: I can use basic facts to approximate decimal quotients with two-digit divisors, reasoning about the placement of the decimal point. (5.NBT.2, 5.NBT.7)Lesson 26-27: I can solve division word problems involving multi-digit division with group size unknown and the number of groups unknown. (5.NBT.2, 5.NBT.7)Topic G: Partial Quotients and Multi-Digit Decimal DivisionLesson 24Lesson 25Lesson 26-27Fluency Practice:Lesson 24 Rename Tenths and HundredthsDivide Decimals Divide by Two-Digit Numbers Lesson 25Rename Tenths and HundredthsDivide Decimals by TenDivide Decimals by Multiples of 10 Lesson 26-27Rename Tenths and HundredthsDivide Decimals by Multiples of 10 Estimate the QuotientUnit ConversionsDivide Decimals by Two-Digit Numbers Learning Targets Topic HLesson 28-29 Solve division word problems involving multi-digit division with group size unknown and the number of groups unknown. (5.NBT.2, 5.NBT.7)Topic H: Measurement Word Problems with Multi-Digit DivisionLesson 28-29 HYPERLINK "" End-of-Module Assessment enVision Resource: (enVision may be used to support the needs of your students, but should not be used independently of the mathematics curriculum)1-3 Decimal Place Value1-4 Comparing and Ordering Decimals1-5 Problem Solving Look for a PatternNumber SenseMental MathRounding Whole Numbers and DecimalsEstimating Sums and DifferencesProblem Solving – Draw a Picture and Write an EquationTasks:Kipton’s ScaleMultiplying Decimals by 10 HYPERLINK "" The Value of EducationCoordinating I-Ready Lessons:Renaming Fractions as DecimalsMultiplication and Division of Decimals by Powers of TenDivide Whole NumbersDividing Whole NumbersFluency PracticeLesson 28-29Multiples of 10 Unit Conversions Divide Decimals by Two-Digit Numbers Module 3 Addition and Subtraction of Fractions (Allow 4 weeks for instruction, review and assessment)Domain: Number and Operations-FractionsCluster: Use equivalent fractions as a strategy to add and subtract fractions. 5.NF.A.1 Add and subtract fractions with unlike denominators.5.NF.A.2 Solve word problems involving addition and subtraction of fractions referring to the same whole.Enduring UnderstandingsOne representation may sometimes be more helpful than another; and, used together multiple representations give a fuller understanding of a problem.Essential QuestionsHow do mathematical ideas interconnect and build on one another to produce a coherent whole?Learning Targets Topic ALesson 1: I can make equivalent fractions with the number line, the area model, and numbers. (4.NF.1)Lesson 2: I can make equivalent fractions with sums of fractions with like denominators. (4.NF.1) Module 3 Addition and Subtraction of FractionsLearning Targets Topic A: Equivalent FractionsLesson 1Lesson 2Videos: HYPERLINK "" Finding equivalent fractions using area modelGame – Logic Game (Adding like fractions)VocabularyBenchmark fraction, like denominator, unlike denominator.Familiar Terns and SymbolsBetween, denominator, equivalent fraction, fraction, fraction greater than or equal to 1, fraction written in the largest possible unit, fractional unit, hundredth, kilometer, meter, centimeter, liter, milliliter, kilogram, gram, mile, yard, foot, inch, gallon, quart, pint, cup, pound, ounce, hour, minute, second, more than halfway and less than halfway, number sentence, numerator, one tenth, tenth, whole unit, <, >, =Fluency Practice:Please see engageNY full module download for suggested fluency pacing and activities. Lesson 1Sprint: Write the Missing Factor Skip-Counting by ? hour Lesson 2Equivalent Fractions Sprint: Find the Missing Numerator or Denominator Topic BLesson 3: Add fractions with unlike units using the strategy of creating equivalent fractions. (5.NF.1, 5.NF.2)Lesson 4: Add fractions with sums between 1 and 2. (5.NF.1, 5.NF.2)Lesson 5: Subtract fractions with unlike units using the strategy of creating equivalent fractions. (5.NF.1, 5.NF.2)Lesson 6: Subtract fractions from numbers between 1 and 2. (5.NF.1, 5.NF.2)Lesson 7: Solve two-step word problems. (5.NF.1, 5.NF.2)Topic B: Making Like Units PictoriallyLesson 3 Lesson 4Lesson 5Lesson 6Lesson 7Mid-Module AssessmentVideos:Finding a common denominator using area modelsAdding fractions with unlike denominators using area modelsSubtracting fractions with unlike denominators using area modelsFluency Practice:Lesson 3Sprint: Equivalent Fractions Adding Like FractionsFractions as DivisionLesson 4Adding Fractions to Make One Whole Skip-Counting by yardLesson 5 Sprint: Subtracting Fractions From a Whole Lesson 6 Name the Fraction to Complete the Whole Taking from the WholeFraction Units to Ones and FractionsLesson 7Sprint: Circle the Equivalent Fraction Topic CLesson 8: Add fractions to and subtract fractions from whole numbers using equivalence and the number line as strategies. (5.NF.1, 5.NF.2) Lesson 9: Add fractions making like units numerically. (5.NF.1, 5.NF.2)Lesson 10: Add fractions with sums greater than 2. (5.NF.1, 5.NF.2)Lesson 11: Subtract fractions making like units numerically. (5.NF.1, 5.NF.2)Lesson 12: Subtract fractions greater than or equal to 1. (5.NF.1, 5.NF.2)Topic C: Making Like Units NumericallyLesson 8Lesson 9Lesson 10Lesson 11Lesson 12Videos: HYPERLINK "" Adding mixed numbers using area models and renaming as improper fractionsSubtracting mixed numbers using area modelsFluency Practice:Lesson 8Adding Whole Numbers and Fractions Subtracting Fractions from Whole Numbers Lesson 9Adding and Subtracting Fractions with Like Units Sprint: Adding and Subtracting Fractions with Like Units Lesson 10Sprint: Add and Subtract Whole Numbers and Ones with Fraction Units Lesson 11Subtracting Fractions from Whole Numbers Adding and Subtracting Fractions with Like Units Lesson 12Sprint: Subtracting Fractions with Like and Unlike UnitsTopic DLesson 13: Use fraction benchmark numbers to assess reasonableness of addition and subtraction equations. (5.NF.1, 5.NF.2)Lesson 14: Strategize to solve multi-term problems. (5.NF.1, 5.NF.2)Lesson 15: Solve multi-step word problems; assess reasonableness of solutions using benchmark numb. (5.NF.1, 5.NF.2)Lesson 16: Explore part-to-whole relationships. (5.NF.1, 5.NF.2)Topic D: Further ApplicationsLesson 13Lesson 14Lesson 15Lesson 16End-of-Module AssessmentFluency Practice Lesson 13From Fractions to Decimals Adding and Subtracting Fractions with Unlike Units Lesson 14Sprint: Make Larger Units (Simplifying Fractions)Happy Counting with Mixed Numbers Lesson 15Sprint: Circle the Smallest Fraction SprintLesson 16Break Apart the Whole Make a Like Unit Add Fractions with Answers Greater than 1 enVision Resource: (enVision may be used to support the needs of your students, but should not be used independently of the mathematics curriculum)10-1: Adding and Subtracting Fractions with Like Denominators 10-1A: Estimating Sums and Differences of Fractions10-2: Common Multiples and Least Common Multiple 10-3: Adding Fractions with Unlike Denominators 10-4: Subtracting Fractions with Unlike Denominators 10-5: Adding Mixed Numbers10-5A?: Modeling Addition and Subtraction of Mixed Numbers10-6: Subtracting Mixed Numbers 10-7A?: More Adding and Subtracting of Mixed NumbersTasks:Cindy’s CatsPart and WholeCoordinating I-Ready Lessons:Understand Adding and Subtracting FractionsAdd and Subtract Fractions in Word ProblemsAdding and Subtracting Unlike FractionsAdd and Subtract FractionsOther:Use this guide as you prepare to teach a module for additional guidance in planning, pacing, and suggestions for omissions.Pacing and Preparation Guide (Omissions)Module 4 Multiplication and Division of Fractions and Decimal Fractions (Allow 3 weeks for instruction, review and assessment)Domain: Operations and Algebraic ThinkingCluster: Write and Interpret Numerical Expressions5.OA.1 Use parentheses, brackets, or braces in numerical expressions, and evaluate expressions with these symbols5.OA.2 Write simple expressions that record calculations with numbers, and interpret numerical expressions without evaluating them. For example, express the calculation “add 8 and 7, then multiply by 2” as 2 × (8 +7). Recognize that 3 × (18932 + 921) is three times as large as 18932 + 921, without having to calculate the indicated sum or productDomain: Number and Operations Base TenCluster: Perform operations with multi-digit whole numbers and with decimals to hundredths. 5.NBT.7 Add subtract, multiply, and divide decimals to hundredths, using concrete models or drawings and strategies based on place value, properties of operations, and/or the relationship between addition and subtraction; relate the strategy to a written method and explain the reasoning usedDomain: Number and Operations- FractionsCluster: Apply and extend previous understandings of multiplication and division to multiply and divide fractions. 5.NF.3 Interpret a fraction as division of the numerator by the denominator (a/b = a ÷ b). Solve word problems involving division of whole numbers leading to answers in the form of fractions or mixed numbers, e.g., by using visual fraction models or equations to represent the problem. For example, interpret 3/4 as the result of dividing 3 by 4, noting that 3/4 multiplied by 4 equals 3, and that when 3 wholes are shared equally among 4 people each person has a share of size 3/4. If 9 people want to share a 50‐pound sack of rice equally by weight, how many pounds of rice should each person get? Between what two whole numbers does your answer lie? 5.NF.4 Apply and extend previous understandings of multiplication to multiply a fraction or whole number by a fraction.a. Interpret the product of (a/b) × q as a parts of a partition of q into b equal parts; equivalently, as the result of a sequence of operations a × q ÷ b. For example, use a visual fraction model to show (2/3) × 4 = 8/3, and create a story context for this equation. Do the same with (2/3) × (4/5) = 8/15. (In general, (a/b) × (c/d) = ac/bd.) 5.NF.5 Interpret multiplication as scaling (resizing), by: a. Comparing the size of a product to the size of one factor on the basis of the size of the other factor, without performing the indicated multiplicationb. Explaining why multiplying a given number by a fraction greater than 1 results in a product greater than the given number (recognizing multiplication by whole numbers greater than 1 as a familiar case); explaining why multiplying a given number by a fraction less than 1 results in a product smaller than the given number; and relating the principle of fraction equivalence a/b = (n×a)/(n×b) to the effect of multiplying a/b by 1. 5.NF.6 Solve real world problems involving multiplication of fractions and mixed numbers, e.g., by using visual fraction models or equations to represent the problem. 5.NF.7 Apply and extend previous understandings of division to divide unit fractions by whole numbers and whole numbers by unit fractions. (Students capable of multiplying fractions can generally develop strategies to divide fractions by reasoning about the relationship between multiplication and division. However, division of a fraction by a fraction is not a requirement at this grade level.) a. Interpret division of a unit fraction by a non-zero whole number, and compute such quotients. For example, create a story context for (1/3) ÷ 4, and use a visual fraction model to show the quotient. Use the relationship between multiplication and division to explain that (1/3) ÷ 4 = 1/12 because (1/12) × 4 = 1/3. b. Interpret division of a whole number by a unit fraction, and compute such quotients. For example, create a story context for 4 ÷ (1/5), and use a visual fraction model to show the quotient. Use the relationship between multiplication and division to explain that 4 ÷ (1/5) = 20 because 20 × (1/5) = 4. C. Solve real world problems involving division of unit fractions by non‐zero whole numbers and division of whole numbers by unit fractions, e.g., by using visual fraction models and equations to represent the problem. For example, how much chocolate will each person get if 3 people share 1/2 lb of chocolate equally? How many 1/3-cup servings are in 2 cups of raisins?Domain: Measurement and DataCluster: Convert like measurement units within a given measurement system.5.MD.1 Convert among different-sized standard measurement units within a given measurement system (e.g., convert 5 cm to 0.05 m), and use these conversions in solving multi-step, real world problemsDomain: Measurement and DataCluster: Represent and Interpret Data5.MD.2 Make a Line plot to display a data set of measurements in fractions of a unit (1/2, 1/4, 1/8). Use operations on fractions for this grade to solve problems involving information presented in line plots. For example, given different measurements of liquid in identical beakers, find the amount of liquid each beaker would contain if the total amount in all the beakers were redistributed equally.Enduring UnderstandingsFractions can be interpreted as division.Equal sharing with area models provides opportunities to understand division of whole numbers with answers in the form of fractions or mixed numbers.Fractions and decimals allow for quantities to be expressed with greater precision than with just whole numbers.Essential QuestionsHow do mathematical ideas interconnect and build on one another to produce a coherent whole?Why express quantities, measurements, and number relationships in different ways?Learning Targets Topic ALesson 1: I can measure and compare pencil lengths to the nearest 12, 14, and 18 of an inch, and analyze the data through line plots. (5. MD.2)engageny Module 4 Multiplication and Division of Fractions and Decimal FractionsTopic A: Line Plots of Fraction MeasurementsLesson 1VocabularyDecimal divisor, simplifyFamiliar Terms and SymbolsCommutative property, conversion factor, decimal fraction, denominator, distribute, divide, division, equation, equivalent fraction, expression, factors, foot, mile, yard, inch, gallon, quart, pound, pint, cup, ounce, hour, minute, second, fraction greater than or equal to 1Fluency Practice:Please see engageNY full module download for suggested fluency pacing and activities. Lesson 1- Compare FractionsDecompose FractionsEquivalent FractionsLearning Targets Topic BLessons 2–3: I can Interpret a fraction as division. (5.NF.3)Lesson 4: I can use tape diagrams to model fractions as division. (5.NF.3)Lesson 5: I can solve word problems involving the division of whole numbers with answers in the form of fractions or whole numbers. (5.NF.3)Topic B: Fractions as Division HYPERLINK "" Lesson 2 HYPERLINK "" Lesson 3 HYPERLINK "" Lesson 4 HYPERLINK "" Lesson 5 Fluency Practice:Lesson 2- Factors of 100 Compare FractionsDecompose Fractions Divide with RemaindersLesson 3Convert to Hundredths Compare Fractions Fractions as Division Write Fractions as Decimals Lesson 4Write Fractions as Decimals Convert to Hundredths Fractions as Division Lesson 5 Fraction of a Set Write Division Sentences as Fractions Write Fractions as Mixed Numbers Learning Targets Topic C Lesson 6: I can relate fractions as division to fraction of a set. (5.NF.4a)Lesson 7: I can multiply any whole number by a fraction using tape diagrams. (5.NF.4a)Lesson 8: I can relate a fraction of a set to the repeated addition interpretation of fraction multiplication. (5.NF.4a)Lesson 9: I can find a fraction of a measurement, and solve word. (5.NF.4a)Topic C: Multiplication of a Whole Number by a Fraction HYPERLINK "" Lesson 6 HYPERLINK "" Lesson 7 HYPERLINK "" Lesson 8Lesson 9 Fluency Practice:Lesson 6Sprint: Divide Whole Numbers Fractions as Division Lesson 7Read Tape DiagramsHalf of Whole Numbers Fractions as Whole Numbers Lesson 8Convert Measures Fractions as Whole Numbers Multiply a Fraction Times a Whole Number Lesson 9Multiply Whole Numbers by Fractions with Tape Diagrams Convert Measures Multiply a Fraction and a Whole Number Learning Targets Topic DLesson 10: Compare and evaluate expressions with parentheses. (5.OA.1, 5.OA.2, 5.NF.4a, 5.NF.6)Lessons 11–12: Solve and create fraction word problems involving addition, subtraction, and multiplication. (5.OA.1, 5.OA.2, 5.NF.4a, 5.NF.6)Topic D: Fraction Expressions and Word Problems HYPERLINK "" Lesson 10 HYPERLINK "" Lesson 11Lesson 12Tasks:Task Bank (TN 5th Grade Task Arc)’s GardenMultiplication with Fractions: Finding Portions of NumbersenVision Resource: (enVision may be used to support the needs of your students, but should not be used independently.)11-1- Multiplying Fractions and Whole Numbers11-2 Multiplying Two Fractions11-2a Estimating Products11-3 Multiplying Mixed Numbers11-4 Relating Division to Multiplication of Fractions11-4a Multiplication as Scaling11-5 Draw a Picture and Write an Equation11-5a Dividing Unit FractionsCoordinating I-Ready Lessons:Multiplying a whole Number and a FractionMultiply Fractions to Find AreaUnderstand Multiplication as ScalingMultiplying FractionsUnderstand Division with Unit FractionsDivide Unit Fractions in Word ProblemsFluency Practice: Lesson 10Convert Measures from Small to Large Units Multiply a Fraction and a Whole Number Find the Unit Conversion Lesson 11Convert Measures Multiply Whole Numbers by Fractions Using Two Methods Write the Expression to Match the Diagram Lesson 12Convert Measures Multiply a Fraction and a Whole Number Write the Expression to Match the Diagram *Use this guide as you prepare to teach a module for additional guidance in planning, pacing, and suggestions for omissions.Pacing and Preparation Guide (Omissions)RESOURCE TOOLBOXThe Resource Toolbox provides additional support for comprehension and mastery of grade-level skills and concepts. These resources were chosen as an accompaniment to modules taught within this quarter. ?Incorporated materials may assist educators with grouping, enrichment, remediation, and differentiation.?NWEA MAP Resources: - Sign in and Click the Learning Continuum Tab – this resources will help as you plan for intervention, and differentiating small group instruction on the skill you are currently teaching. (Four Ways to Impact Teaching with the Learning Continuum) - These Khan Academy lessons are aligned to RIT scores.Textbook ResourcesengageNY Mathematics Modulesenvision MathTN Core/CCSSTNReady Math StandardsAchieve the CoreVideosTech Coach Corner PowerPoint and Resources Teaching Channel HYPERLINK "" \h Scholastic Math StudyJams Math TV LearnZillion Khan AcademyChildren’s Literature Stuart J. MurphyMath WireElementary Math Literature The Reading NookInteractive Manipulatives Resources for Teaching Math Interactive Sites for Educators Math Playground: Common Core StandardsThinking Blocks: Computer and iPad based games PARCC GamesIXL Math Virtual ManipulativesAdditional Sites ResourcesOther:Illustrated Mathematics Dictionary for KidsUse this guide as you prepare to teach a module for additional guidance in planning, pacing, and suggestions for omissions.Pacing and Preparation Guide (Omissions) ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download