Bid Room FTP Site for General Contractors
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Air |4600 |208-230/1/60 |24500 |10 |23 |134 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |
| | | |velocity reduces product drying. |
|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |
| | | |servicing |
|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|
| | | |environments |
|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |
|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |
| |installation | | |
| | |• |Sweat inlet connection to reduce leaks (flare connection available|
| | | |as a ship loose option) |
| |Fan Guards and Motors: | | |
|• |Motors plug into wiring harness for easier servicing | | |
|• |Single phase EC motors available factory-installed | | |
|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Air |4400 |208-230/1/60 |30000 |10 |23 |148 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |
| | | |velocity reduces product drying. |
|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |
| | | |servicing |
|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|
| | | |environments |
|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |
|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |
| |installation | | |
| | |• |Sweat inlet connection to reduce leaks (flare connection available|
| | | |as a ship loose option) |
| |Fan Guards and Motors: | | |
|• |Motors plug into wiring harness for easier servicing | | |
|• |Single phase EC motors available factory-installed | | |
|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Air |6900 |208-230/1/60 |36500 |10 |23 |200 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |
| | | |velocity reduces product drying. |
|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |
| | | |servicing |
|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|
| | | |environments |
|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |
|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |
| |installation | | |
| | |• |Sweat inlet connection to reduce leaks (flare connection available|
| | | |as a ship loose option) |
| |Fan Guards and Motors: | | |
|• |Motors plug into wiring harness for easier servicing | | |
|• |Single phase EC motors available factory-installed | | |
|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Air |6600 |208-230/1/60 |45000 |10 |23 |227 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |
| | | |velocity reduces product drying. |
|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |
| | | |servicing |
|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|
| | | |environments |
|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |
|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |
| |installation | | |
| | |• |Sweat inlet connection to reduce leaks (flare connection available|
| | | |as a ship loose option) |
| |Fan Guards and Motors: | | |
|• |Motors plug into wiring harness for easier servicing | | |
|• |Single phase EC motors available factory-installed | | |
|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Air |9200 |208-230/1/60 |51000 |10 |23 |230 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |
| | | |velocity reduces product drying. |
|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |
| | | |servicing |
|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|
| | | |environments |
|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |
|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |
| |installation | | |
| | |• |Sweat inlet connection to reduce leaks (flare connection available|
| | | |as a ship loose option) |
| |Fan Guards and Motors: | | |
|• |Motors plug into wiring harness for easier servicing | | |
|• |Single phase EC motors available factory-installed | | |
|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Electric |4650 |208-230/3/60 |22000 |10 |-20 |151 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |
| | | |velocity reduces product drying. |
|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |
| | | |servicing |
|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|
| | | |environments |
|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |
|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |
| |installation | | |
| | |• |Sweat inlet connection to reduce leaks (flare connection available|
| | | |as a ship loose option) |
| |Fan Guards and Motors: | | |
|• |Motors plug into wiring harness for easier servicing | | |
|• |Single phase EC motors available factory-installed | | |
|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Electric |7350 |208-230/3/60 |25000 |10 |-20 |207 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |
| | | |velocity reduces product drying. |
|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |
| | | |servicing |
|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|
| | | |environments |
|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |
|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |
| |installation | | |
| | |• |Sweat inlet connection to reduce leaks (flare connection available|
| | | |as a ship loose option) |
| |Fan Guards and Motors: | | |
|• |Motors plug into wiring harness for easier servicing | | |
|• |Single phase EC motors available factory-installed | | |
|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Electric |6975 |208-230/3/60 |33000 |10 |-20 |234 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |
| | | |velocity reduces product drying. |
|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |
| | | |servicing |
|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|
| | | |environments |
|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |
|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |
| |installation | | |
| | |• |Sweat inlet connection to reduce leaks (flare connection available|
| | | |as a ship loose option) |
| |Fan Guards and Motors: | | |
|• |Motors plug into wiring harness for easier servicing | | |
|• |Single phase EC motors available factory-installed | | |
|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Electric |9100 |208-230/3/60 |37000 |10 |-20 |262 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet |• |Air pattern reduces air loss when doors are opened and the medium |
| | | |velocity reduces product drying. |
|• |Schrader valve provided for suction pressure measurement |• |Drain pan and fan panel is easily removed for installation and |
| | | |servicing |
|• |All electrical components factory wired to terminal board |• |Optional coated coil available for optimum protection in corrosive|
| | | |environments |
|• |Internal panels are isolated for quiet operation |• |Coils are dehydrated and sealed |
|• |Liquid line solenoid wire harness factory installed for quick |• |Internal junction box for electrical connection |
| |installation | | |
| | |• |Sweat inlet connection to reduce leaks (flare connection available|
| | | |as a ship loose option) |
| |Fan Guards and Motors: | | |
|• |Motors plug into wiring harness for easier servicing | | |
|• |Single phase EC motors available factory-installed | | |
|• |Thermally protected, lifetime-lubricated single phase PSC motors | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Electric |730 |208-230/1/60 |7500 |10 |23 |108 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet cleans easily and looks |• |Patented Thermo-Flex? coil design with 5 Yr. limited warranty |
| |attractive | |against internal leaks |
|• |Low height is ideal for low ceiling coolers - larger models are |• |Internally enhanced copper tubing and aluminum fin design for |
| |only 15 inches tall, allowing for maximum headroom and more | |higher efficiency |
| |product storage | | |
|• |Unit designed to be mounted flush against the ceiling or suspended|• |Sweat connections to reduce potential for leaks |
| |on rods | | |
|• |Stainless steel screws prevent rust streaks | | |
|• |Liquid line solenoid wire harness is factory-installed for quick | |Drain Pan: |
| |installation | | |
|• |Removable end panels for complete access to refrigerant and |• |Front hinged drain pan for easy access |
| |electrical components | | |
|• |All electrical components factory wired to terminal board |• |Large diameter drain fitting |
|• |Schrader valve on suction header | | |
| | | | |
| |Drain Pan: | | |
|• |Double drain pan eliminates drain pan sweating | | |
|• |Tapered mounting provides proper slope for condensate drainage to | | |
| |one end of the unit | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Electric |1450 |208-230/1/60 |10000 |10 |23 |111 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet cleans easily and looks |• |Patented Thermo-Flex? coil design with 5 Yr. limited warranty |
| |attractive | |against internal leaks |
|• |Low height is ideal for low ceiling coolers - larger models are |• |Internally enhanced copper tubing and aluminum fin design for |
| |only 15 inches tall, allowing for maximum headroom and more | |higher efficiency |
| |product storage | | |
|• |Unit designed to be mounted flush against the ceiling or suspended|• |Sweat connections to reduce potential for leaks |
| |on rods | | |
|• |Stainless steel screws prevent rust streaks | | |
|• |Liquid line solenoid wire harness is factory-installed for quick | |Drain Pan: |
| |installation | | |
|• |Removable end panels for complete access to refrigerant and |• |Front hinged drain pan for easy access |
| |electrical components | | |
|• |All electrical components factory wired to terminal board |• |Large diameter drain fitting |
|• |Schrader valve on suction header | | |
| | | | |
| |Drain Pan: | | |
|• |Double drain pan eliminates drain pan sweating | | |
|• |Tapered mounting provides proper slope for condensate drainage to | | |
| |one end of the unit | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Electric |1470 |208-230/1/60 |13000 |10 |23 |150 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Heavy-gauge textured aluminum cabinet cleans easily and looks |• |Patented Thermo-Flex? coil design with 5 Yr. limited warranty |
| |attractive | |against internal leaks |
|• |Low height is ideal for low ceiling coolers - larger models are |• |Internally enhanced copper tubing and aluminum fin design for |
| |only 15 inches tall, allowing for maximum headroom and more | |higher efficiency |
| |product storage | | |
|• |Unit designed to be mounted flush against the ceiling or suspended|• |Sweat connections to reduce potential for leaks |
| |on rods | | |
|• |Stainless steel screws prevent rust streaks | | |
|• |Liquid line solenoid wire harness is factory-installed for quick | |Drain Pan: |
| |installation | | |
|• |Removable end panels for complete access to refrigerant and |• |Front hinged drain pan for easy access |
| |electrical components | | |
|• |All electrical components factory wired to terminal board |• |Large diameter drain fitting |
|• |Schrader valve on suction header | | |
| | | | |
| |Drain Pan: | | |
|• |Double drain pan eliminates drain pan sweating | | |
|• |Tapered mounting provides proper slope for condensate drainage to | | |
| |one end of the unit | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Electric |1300 |208-230/1/60 |10449 |10 |23 |48 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Aluminum textured panels |• |Cross-fin cooling coils with corrugated aluminum fins spaced 6 FPI|
| | | |& 3/8" OD staggered copper tubes provide optimum heat transfer |
|• |Front Access to electrical and refrigeration components |• |Generous coil surface helps to maintain steady room temperature |
| | | |and minimize product shrinkage |
|• |Small, low profile physical cabinet size with optimized interior |• |Coils are dehydrated and sealed at the factory |
| |space | | |
|• |The electrical board is front facing for easy access |• |Sweat connections to reduce potential for leaks |
|• |Internal panels are isolated for quiet operation | | |
|• |Liquid line solenoid wire harness factory installed for quick | |Fan Guards and Motors: |
| |installation | | |
|• |Pre-drilled holes on the back of the unit for room thermostat and |• |Motors are factory-wired to unit junction box for fast |
| |controls | |installation |
| | |• |Thermal overload protected motors are resiliently mounted inside |
| | | |the unit to assure minimum noise level |
| |Drain Pan: |• |EC motors (optional) available factory-installed |
|• |Drain fitting is located to the back of the unit with larger | | |
| |diameter | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Electric |2100 |208-230/1/60 |13932 |10 |23 |60 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Aluminum textured panels |• |Cross-fin cooling coils with corrugated aluminum fins spaced 6 FPI|
| | | |& 3/8" OD staggered copper tubes provide optimum heat transfer |
|• |Front Access to electrical and refrigeration components |• |Generous coil surface helps to maintain steady room temperature |
| | | |and minimize product shrinkage |
|• |Small, low profile physical cabinet size with optimized interior |• |Coils are dehydrated and sealed at the factory |
| |space | | |
|• |The electrical board is front facing for easy access |• |Sweat connections to reduce potential for leaks |
|• |Internal panels are isolated for quiet operation | | |
|• |Liquid line solenoid wire harness factory installed for quick | |Fan Guards and Motors: |
| |installation | | |
|• |Pre-drilled holes on the back of the unit for room thermostat and |• |Motors are factory-wired to unit junction box for fast |
| |controls | |installation |
| | |• |Thermal overload protected motors are resiliently mounted inside |
| | | |the unit to assure minimum noise level |
| |Drain Pan: |• |EC motors (optional) available factory-installed |
|• |Drain fitting is located to the back of the unit with larger | | |
| |diameter | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
PHYSICAL & ELECTRICAL DATA
|DEFROST TYPE |AIR FLOW |VOLTAGE |CAPACITY |RATING TD |RATING SST |Approx. NET WEIGHT |ALTITUDE |
|Electric |1950 |208-230/1/60 |16254 |10 |23 |62 |0 ft. |
|FANS |HEATERS |CONNECTIONS (inches) |
|QTY |
•
|DIMENSIONS (inches) |
|A |
|N |P |R |S |
|• |Aluminum textured panels |• |Cross-fin cooling coils with corrugated aluminum fins spaced 6 FPI|
| | | |& 3/8" OD staggered copper tubes provide optimum heat transfer |
|• |Front Access to electrical and refrigeration components |• |Generous coil surface helps to maintain steady room temperature |
| | | |and minimize product shrinkage |
|• |Small, low profile physical cabinet size with optimized interior |• |Coils are dehydrated and sealed at the factory |
| |space | | |
|• |The electrical board is front facing for easy access |• |Sweat connections to reduce potential for leaks |
|• |Internal panels are isolated for quiet operation | | |
|• |Liquid line solenoid wire harness factory installed for quick | |Fan Guards and Motors: |
| |installation | | |
|• |Pre-drilled holes on the back of the unit for room thermostat and |• |Motors are factory-wired to unit junction box for fast |
| |controls | |installation |
| | |• |Thermal overload protected motors are resiliently mounted inside |
| | | |the unit to assure minimum noise level |
| |Drain Pan: |• |EC motors (optional) available factory-installed |
|• |Drain fitting is located to the back of the unit with larger | | |
| |diameter | | |
OPTIONS
Mounted Options:
|☒ Motor: EC | |
Ship Loose Options (by Unit):
|None | |
Ship Loose Options (by System):
|None | |
MINIMUM UNIT CLEARANCES
|[pic] |
[pic]
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- tn general contractors license
- tennessee general contractors license
- tennessee general contractors license application
- tennessee general contractors list
- tennessee general contractors license lookup
- key general contractors tulsa
- ftp site username password
- tn general contractors license test
- tennessee general contractors license test
- general contractors contract forms
- general contractors agreement california
- commercial general contractors tulsa ok