ARCAT, Inc.

 SECTION 08 71 00SPECIAL FUNCTION HARDWARE - DOOR AND GATE SAFETY CONTROLSDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2020 - 2020 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** Miller Edge, Inc.; door and gate hardware.This section is based on the products of Miller Edge, Inc., which is located at:300 N. Jennersville Rd. P. O. Box 159West Grove, PA 19390Toll Free Tel: 800-220-3343Tel: 610-869-4422Fax: 610-869-4423Email: request info (tcastello@)Web: [ Click Here ] for additional information.At work or at home, Miller Edge manufactures sensing solutions to help keep you and your property safe from injury or damage. From motorized doors and gates to robots and automated equipment, Miller Edge has a solution for you!

GENERAL

SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

Sensing Edges:

Sectional doors.

Rolling steel doors.

Bi-fold doors.

Hangar doors.

Counter top grilles and counter top doors.

One-piece style tilt doors.

Rolling shutter doors

Swing gates.

Slide gates.

Cantilever gates.

RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

Section 08 33 13 - Coiling Counter Doors.

Section 08 34 13 - Cold Storage Doors.

Section 08 35 13.13 - Accordion Folding Doors

SUBMITTALS

Submit under provisions of Section 01 30 00 - Administrative Requirements.

Product Data:

Manufacturer's data sheets on each product to be used.

Preparation instructions and recommendations.

Storage and handling requirements and recommendations.

Typical installation methods.

** NOTE TO SPECIFIER ** Delete if not applicable to product type.

Verification Samples: Two representative units of each type, size, pattern and color.

Shop Drawings: Include details of materials, construction and finish. Include relationship with adjacent construction.

QUALITY ASSURANCE

Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with a minimum five years documented experience.

Installer Qualifications: Company specializing in performing Work of this section with minimum two years documented experience with projects of similar scope and complexity.

Source Limitations: Provide each type of product from a single manufacturing source to ensure uniformity.

** NOTE TO SPECIFIER ** Include mock-up if the project size or quality warrant the expense. The following is one example of how a mock-up on might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

Mock-Up: Construct a mock-up with actual materials in sufficient time for Architect's review and to not delay construction progress. Locate mock-up as acceptable to Architect and provide temporary foundations and support.

Intent of mock-up is to demonstrate quality of workmanship and visual appearance.

If mock-up is not acceptable, rebuild mock-up until satisfactory results are achieved.

Retain mock-up during construction as a standard for comparison with completed work.

Do not alter or remove mock-up until work is completed or removal is authorized.

PRE-INSTALLATION CONFERENCE

Convene a conference approximately two weeks before scheduled commencement of the Work. Attendees shall include Architect, Contractor and trades involved. Agenda shall include schedule, responsibilities, critical path items and approvals.

DELIVERY, STORAGE, AND HANDLING

Store and handle in strict compliance with manufacturer's written instructions and recommendations.

Protect from damage due to weather, excessive temperature, and construction operations.

PROJECT CONDITIONS

Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

WARRANTY

Manufacturer's standard limited warranty unless indicated otherwise.

PRODUCTS

MANUFACTURERS

Acceptable Manufacturer: Miller Edge, Inc., which is located at: 300 N. Jennersville Rd. P. O. Box 159; West Grove, PA 19390; Toll Free Tel: 800-220-3343; Tel: 610-869-4422; Fax: 610-869-4423; Email: request info (tcastello@); Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

Substitutions: Not permitted.

Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Delete article if not required.

SECTIONAL DOORS SENSING EDGES

Hazard Zones: Leading Edge/Bottom of Door. Pressure sensitive edges.

Slide-In Style:

** NOTE TO SPECIFIER ** Delete models and options not required.

Model ME112: Adaptable to suit a wide variety of applications. When touch activated, it sends a signal to stop and/or reverse operation. Retrofits onto 1 to 1-1/4 (25 to 32 mm) sectional doors. Mounts horizontal or vertical.

ANSI/UL325 recognized component.

Size (HxW): 1-1/2 x 1-5/16 inch (38 x 34 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 6 to 10 lbf (2.7 to 4.5 kgf).

Electrical Diagram: 2-wire N.O. configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, left, right.

Color: Black.

Mounting Channel: ME112-C3. Material: PVC.

Mounting Channel: ME112-C7. Material: PVC.

Model ME113: Adaptable to a variety of applications. Manufactured to user specified length, sensitivity and outlet location. Touch activation sends signal to stop and/or reverse operations. Retrofits to 1-1/4 to 1-1/2 inch (32 to 38 mm) sectional doors with one of our mounting channels.

ANSI/UL325 recognized component.

Size (HxW): 1-9/16 x 1-1/2 inch (39 x 38 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 7to12 lbf (3.2 to 5.4 kgf).

Electrical Diagram: 2-wire N.O. configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, Left, right.

Color: Black.

Mounting Channel: ME113-C. Material: PVC.

Mounting Channel: ME113-C2. Material: PVC.

Mounting Channel: ME113-C3. Material: PVC.

Mounting Channel: ME113-C7. Material: PVC.

Model ME116: When touched lightly, pressure sensitive electric edge sends signal to controls to, stop and/or reverse operations. Fits all CHI doors with double track bottom retainers. With mounting channels, will fit most doors 1-1/2 to 2 inches (38 to 51 mm) thick. Resistant to flame, water, and most common greases and oils.

ANSI/UL325 recognized component.

Size (HxW): 1-1/2 x 1-13/16 inch (39 x 46 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 7 to 10 lbf (3.2 to 4.5 kgf).

Electrical Diagram: 2-wire N.O. configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right.

Color: Black.

Mounting Channel: Slides into bottom section.

Model ME117: Pressure sensitive electric edge adaptable to a variety of applications. When touch activated, electrically signals controls to stop and/or reverse operations. With mounting channel, will fit most doors from 1 to 2 inches (25 to 51 mm) thick.

Size (HxW): 2 x 1-7/8 inch (51 x 48 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 22 gauge, universal.

Sensitivity: Nominal 8 to 13 lbf (3.6 to 5.9 kgf).

Electrical Diagram: 2-wire N.O. configuration. 2 Wire terminated configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME117-C7. Material: PVC.

Model ME120: Ideal for a variety of applications for motorized doors and gates and industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems detecting operator reach in, below lifts to protect from pinch points, and a variety of equipment where touch detection is desired.

UL 325 recognized component.

Size (HxW): 1-15/16 x 1-7/16 inch (49 x 36 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 8 to 13 lbf (3.6 to 5.9 kgf).

Electrical Diagram: 2-wire N.O. configuration. 2 Wire terminated configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME120-C. Material: PVC.

Mounting Channel: ME120-PC. Material: PVC.

Model ME123: Pressure sensitive electric edge adaptable to suit a wide variety of applications. When touch activated, sends electrical signal to controls to stop and/or reverse operations. Designed to fit most sectional doors.

ANSI/UL325 recognized component.

Size (HxW): 1-1/2 x 1-7/8 inch (38 x 48 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 6 to 11 lbf (2.7 to 5 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Field Assembled:

Model CPT223: Field assembled. Provide a quick fix for sectional and rolling doors. Conductive Polymer easily stores on any service truck and assembles in no time. With ME123 mounting channels, can be installed on rolling steel doors or sectional doors 1-1/2 to 2 inches (38 to 51 mm) thick.

ANSI/UL325 recognized component.

Size (HxW): 1-5/8 x 1-11/16 inch (41 x 42 mm).

Extrusion Length: Extruded Flexible PVC 50 and 100 ft (15.2 to 30.5 m).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 7 to 12 lbf (3.2 to 5.4 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Style: Direct mount.

Model MU21. Direct mount. Pressure sensitive electric edge is manufactured to specifications. When touched lightly or at an angle, sends signal to controls to stop and/or reverse operations. Flexible and contours curved surfaces. Profile can be square, rectangular or angled.

ANSI/UL325 recognized component.

Size (HxW): 1 x 2 inches (25 x 51 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 4 to 7 lbf (1.8 to 3.2 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right.

Color: Black.

Color: Gray.

Color: Yellow.

Color: Yellow and black stripes.

Color: Yellow "XR5".

Mounting: Tabs.

Model MU22. Direct mount. Custom manufactured to specifications for length, width, height and sensitivity. When touched sends signal to controls to stop, and/or reverse operations. Contours to curved surfaces.

Profile: Square, rectangular or angled.

Size (HxW): 2 x 2 inches (51 x 51 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 4 to 7 lbf (1.8 to 3.2).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right.

Color: Black.

Color: Gray.

Color: Yellow.

Color: Yellow and black stripes.

Mounting: Tabs.

Clima-GUARD: Direct mount. Pressure-sensitive electric edge provides a weather seal for doors having uneven thresholds, eliminating risk of damaging edge from over-compression. Touch activated, sending signal to stop and/or reverse. Retrofits easily to 2 inch (51 mm) sectional doors.

Size (HxW): 3 x 2-1/4 inches (76 x 57 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 6 to 10 lbf (2.7 to 4.5).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal.

Color: Black.

Color: Yellow.

Mounting Channel: ME112-C4. Material: PVC.

Mounting Channel: ME112-C43. Material: PVC.

Mounting Channel: ME112-C47. Material: PVC.

Style: Non-Contact:

Model Patriot T2: Infrared thru-beam photo eye. Travels with the door

Meets current UL325 standards for commercial door and gate operators.

Size (LxWxH): 12.38 x 0.50 x 0.50 inch (314 x 13 x 13 mm).

Monitored: MIRM-T2.

Fail Safe: MIRF-T2.

Enclosure: NEMA 4, Class 2, IP65. Indoor and outdoor.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Range: Up to 50 ft (15 m).

Model Rebel: Monitored infrared thru-beam photo eye. Emitting and receiving units. Indoor and outdoor use. Impact Resistant for Rugged Environments.

UL325 Compliant for doors.

Monitored: MIRM-S2.

Fail safe: MIRF-S2.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Range: 30 ft (9 m).

Range: 50 ft (15 m).

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Mounting: Vertical or horizontal; wall, floor, or post.

Model Prime-GUARD (PG): Monitored Infra-red thru-beam photo eye and receiving unit. Indoor and outdoor use. Mounts to wall, floor, or post.

UL 325 recognized component for doors and gates.

Enclosure: NEMA 4 enclosure. Aluminum.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Dimensions (HxLxW): 5.1 x 2.8 x 1.8 inches (130 x 71 x 46 mm).

Front mounted green LED alignment indicator.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Wireless battery powered emitter.

Range: 100 ft (30 m).

** NOTE TO SPECIFIER ** Fail safe is optional. Delete if not required.

Fail safe configuration.

Model Reflecti-GUARD (RG): Monitored reflective photo eye; a barrier guarding a hazard or entrapment zone. Indoor and outdoor use.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Emitter Dimensions (HxWxD): 5.1 x 1.8 x 2.8 inches (130 x 46 x 71 mm).

Reflector Dimensions (HxW): 4.6 x 1.2 inch (117 x 30 mm).

Enclosure Material: Aluminum. Mounting Method: Wall, floor, or post.

Alignment Indicator: Front mounted green LED.

Reflector: MEI authorized, rectangular, corner cube retro reflector.

Range: 30 ft (9 m).

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

** NOTE TO SPECIFIER ** Fail safe and reflector hood are optional. Delete if not required.

Fail safe configuration.

Reflector hood.

Light Curtain:

Model: Monitored Light Curtain (MLC). A series of thru beam photo eyes attached near door track or guides. A dense barrier of light, when interrupted, signals door to reverse. Commercial and industrial door applications.

UL 325 recognized component. IP67 waterproof housing.

Mounting brackets: Included.

Span (WxH): Up to 32 x 6 ft (9.75 to 1.8 m). Range: 32 ft (9.75 m).

Ambient Light: Greater than 100,000 Lux.

Aperture Angle EM: Plus or minus 8 degrees. RX: Plus or minus 15 degrees.

Model No. MLC-K36: 3 ft (1 m). Number of Elements: 8.

Model No. MLC-K72: 6 ft (2 m). Number of Elements: 16.

Supply Voltage: 12-24 VAC/DC.

Temperature Range: -40 to 60 degrees C (-40 to 140 degrees C).

Indoor and outdoor use.

** NOTE TO SPECIFIER ** Delete article if not required.

ROLLING STEEL DOORS SENSING EDGES

** NOTE TO SPECIFIER ** Delete hazard zones, styles, models, and options not required.

Hazard Zones: Leading Edge/Bottom of Door.

Style: Slide-in.

Model ME120: Ideal for a variety of applications for motorized doors and gates and industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems detecting operator reach in, below lifts to protect from pinch points, and a variety of equipment where touch detection is desired.

UL 325 recognized component.

Size (HxW): 1-15/16 x 1-7/16 inch (49 x 36 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 8 to 13 lbf (3.6 to 5.8 kgf).

Electrical Diagram: 2-wire N.O. configuration. 2 Wire terminated configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME120-C. Material: PVC.

Mounting Channel: ME120-PC. Material: PVC.

Model ME123: Pressure sensitive electric edge adaptable to suit a wide variety of applications. When touch activated, sends electrical signal to controls to stop and/or reverse operations. Designed to fit most sectional doors.

ANSI/UL325 recognized component.

Size (HxW): 1-1/2 x 1-7/8 inch (38 x 48 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 6 to 11 lbf (2.7 to 5 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Style: Direct Mount.

Model MT21. Custom manufactured specifications for length, width, height and sensitivity. When touched lightly sends signal to controls to stop, and/or reverse operations. Contours to curved surfaces. Acts as a weatherstrip on doors. .

ANSI/UL325 recognized component.

Size (HxW): 1 x 2 inches (25 x 51 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 6 to 11 lbf (2.7 to 5 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right.

Color: Black.

Color: Gray.

Color: Yellow.

Color: Yellow and black stripes.

Color: Yellow "XR5".

Mounting: Between bottom bars. Horizontal mount.

Model MT22. Pressure-sensitive electric sensing edge custom manufactured to your specifications for length, width, height, and sensitivity. When touched lightly or at an angle, will send an electrical signal to your controls to stop and/or reverse operations. It is completely flexible and will contour to curved surfaces. Device also acts as a weatherstrip.

ANSI/UL325 recognized component.

Size (HxW): 2 x 2 inches (51 x 51 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 4 to 7 lbf (1.8 to 3.1 kgf).

Electrical Diagram: 2-wire N.O. configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right.

Color: Black.

Color: Gray.

Color: Yellow.

Color: Yellow and black stripe.

Color: Yellow "XR5".

Mounting: Between bottom bars.

Style: Field assembled.

Model CPT210: Sensing . Efficient, effective quick fix for doors and gates. Easily stored on service truck for field assembly. Includes molded end plugs with encapsulated terminated or non-terminated configurations.

IP67, UL 325 recognized component.

Size (HxW): 1-1/8 x 7/8 inch (28 x 23 mm). 50 ft (15 m) rolls.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 3 to 5 lbf (1.4 to 2.3 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME120-C3. Material: PVC.

Mounting Channel: ME120-C7. Material: PVC.

Model CPT223: Provide a quick fix for sectional and rolling doors. Conductive Polymer easily stores on any service truck and assembles in no time. With ME123 mounting channels, can be installed on rolling steel doors or sectional doors 1-1/2 to 2 inches (38 to 51 mm) thick.

ANSI/UL325 recognized component.

Size (HxW): 1-5/8 x 1-11/16 inch (41 x 42 mm).

Extrusion Length: Extruded Flexible PVC 50 and 100 ft (30.5 m).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 7 to 12 lbf (3.2 to 5.4 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC

Contact Element: "CPT" Conductive Polymer Technology

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Clima-GUARD: Pressure-sensitive electric edge provides a weather seal for doors having uneven thresholds, eliminating risk of damaging edge from over-compression. Touch activated, sending signal to stop and/or reverse. Retrofits easily to 2 inch (51 mm) sectional doors.

Size (HxW): 3 x 2-1/4 inches (76 x 57 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 6 to 10 lbf (2.7 to 4.5 kg).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal.

Color: Black.

Color: Yellow.

Mounting Channel: ME112-C4. Material: PVC.

Mounting Channel: ME112-C43. Material: PVC.

Mounting Channel: ME112-C47. Material: PVC.

Style: Non-Contact.

Model Patriot Z2: Infrared thru-beam photo eye. Travels with the door

Meets current UL325 standards for commercial door and gate operators.

Size (LxWxH): 2.375 x 2 x 1.25 inch (60 x 51 x 32 mm).

Monitored: MIRM-Z2

Fail Safe: MIRF-Z2

Enlosure: NEMA 4, Class 2, IP65. Indoor and outdoor

Configurations: Photo optics. Accessories, and sensing edges monitored by operator controls. Self-monitoring circuitry.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Range: Up to 50 ft (15 m).

Hazard Zones: Interior.

Photo Optics:

Model Rebel: Monitored infrared thru-beam photo eye. Emitting and receiving units. Indoor and outdoor use. Impact Resistant for Rugged Environments

UL325 Compliant for Doors

Monitored: MIRM-S2

Fail safe: MIRF-S2

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls. Alignment indicator.

Range: 30 ft (9 m).

Range: 50 ft (15 m).

Temperature Range: -40 to 185 degrees F (-40 to 85 degrees C).

Mounting: Vertical or horizontal; wall, floor, or post.

Model Prime-GUARD (PG): Monitored Infra-red thu-beam photo eye and receiving unit. Indoor and outdoor use. Mounts to wall, floor, or post.

UL 325 recognized component for doors and gates.

Enclosure: NEMA 4 enclosure. Aluminum

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Dimensions (HxLxW): 5.1 x 2.8 x 1.8 inches (130 x 71 x 46 mm).

Front mounted green LED alignment indicator.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Wireless battery powered emitter.

Range: 100 ft (30 m).

** NOTE TO SPECIFIER ** Fail safe is optional. Delete if not required.

Fail safe configuration.

Model Reflecti-GUARD (RG): Monitored reflective photo eye; a barrier guarding a hazard or entrapment zone. Indoor and outdoor use.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls. No batteries required.

Emitter Dimensions (HxWxD): 5.1 x 1.8 x 2.8 inches (130 x 46 x 71 mm).

Reflector Dimensions (HxW): 4.6 x 1.2 inch (117 x 30 mm).

Enclosure Material: Aluminum. Mounting Method: Wall, floor, or post.

Alignment Indicator: Front mounted green LED.

Reflector: MEI authorized, rectangular, corner cube retro reflector.

Range: 30 ft (9 m).

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

** NOTE TO SPECIFIER ** Fail safe and reflector hood are optional. Delete if not required.

Fail safe configuration.

Reflector hood.

Light Curtain:

Model: Monitored Light Curtain (MLC). A series of thru beam photo eyes attached near door track or guides. A dense barrier of light, when interrupted, signals door to reverse. Commercial and industrial door applications.

UL 325 recognized component. IP67 waterproof housing.

Mounting brackets: Included.

Span (WxH): Up to 32 x 6 ft (9.75 to 1.8 m). Range: 32 ft (9.75 m).

Ambient Light: Greater than 100,000 Lux.

Aperture Angle EM: Plus or minus 8 degrees. RX: Plus or minus 15 degrees.

Model No. MLC-K36: 3 ft (1 m). Number of Elements: 8.

Model No. MLC-K72: 6 ft (2 m). Number of Elements: 16.

Supply Voltage: 12-24 VAC/DC.

Temperature Range: -40 to 60 degrees C (-40 to 140 degrees C).

Indoor and outdoor use.

** NOTE TO SPECIFIER ** Delete article if not required.

BI-FOLD DOORS SENSING EDGES

** NOTE TO SPECIFIER ** Delete hazard zones, styles, models, and options not required.

Hazard Zones: Leading Edge/Bottom of Door.

Style: Slide-in.

Model ME123: Pressure sensitive electric edge adaptable to suit a wide variety of applications. When touch activated, sends electrical signal to controls to stop and/or reverse operations. Designed to fit most sectional doors.

ANSI/UL325 recognized component.

Size (HxW): 1-1/2 x 1-7/8 inch (38 x 48 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 6 to 11 lbf (2.7 to 5 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Clima-GUARD: Pressure-sensitive electric edge provides a weather seal for doors having uneven thresholds, eliminating risk of damaging edge from over-compression. Touch activated, sending signal to stop and/or reverse. Retrofits easily to 2 inch (51 mm) sectional doors.

Size (HxW): 3 x 2-1/4 inches (76 x 57 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 6 to 10 lbf (2.7 to 4.5 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal.

Color: Black.

Color: Yellow.

Mounting Channel: ME112-C4. Material: PVC.

Mounting Channel: ME112-C43. Material: PVC.

Mounting Channel: ME112-C47. Material: PVC.

Style: Direct mount.

Model MU21. Pressure sensitive electric edge is manufactured to specifications. When touched lightly or at an angle, sends signal to controls to stop and/or reverse operations. Flexible and contours curved surfaces. Profile can be square, rectangular or angled.

ANSI/UL325 recognized component.

Size (HxW): 1 x 2 inches (25 x 51 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 4 to 7 lbf (1.8 to 3.2 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right.

Color: Black.

Color: Gray.

Color: Yellow.

Color: Yellow and black stripes.

Color: Yellow "XR5"

Mounting: Tabs.

Model MU22. Custom manufactured to specifications for length, width, height and sensitivity. When touched sends signal to controls to stop, and/or reverse operations. Contours to curved surfaces.

Profile: Square, rectangular or angled.

Size (HxW): 2 x 2 inches (51 x 51 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right

Color: Black.

Color: Gray.

Color: Yellow.

Color: Yellow and black stripes.

Mounting: Tabs.

Model: MUxx. For custom hangar door edges. A versatile pressure sensitive electric edge custom manufactured to exact specifications for length, width, height and sensitivity. When touched sends signal to controls to stop, and/or reverse operations. Contours to curved surfaces.

Size (HxW): Custom. Profile: Square, rectangular or angled.

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right.

Color: Black.

Color: Gray.

Color: Yellow.

Color: White.

Mounting: Tabs.

Hazard Zones: Interior.

Photo Optics:

Model Rebel: Monitored infrared thru-beam photo eye. Emitting and receiving units. Indoor and outdoor use. Impact Resistant for Rugged Environments.

UL325 Compliant for Doors

Monitored: MIRM-S2

Fail safe: MIRF-S2

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Range: 30 ft (9 m).

Range: 50 ft (15 m).

Temperature Range: -40 to 185 degrees F (-40 to 85 degrees C).

Mounting: Vertical or horizontal; wall, floor, or post.

Model Prime-GUARD (PG): Monitored Infra-red thu-beam photo eye and receiving unit. Indoor and outdoor use. Mounts to wall, floor, or post.

UL 325 recognized component for doors and gates.

Enclosure: NEMA 4 enclosure. Aluminum.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Dimensions (HxLxW): 5.1 x 2.8 x 1.8 inches (130 x 71 x 46 mm).

Front mounted green LED alignment indicator.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Wireless battery powered emitter.

Range: 100 ft (30 m).

** NOTE TO SPECIFIER ** Fail safe is optional. Delete if not required.

Fail safe configuration.

Model Reflecti-GUARD (RG): Monitored reflective photo eye; a barrier guarding a hazard or entrapment zone. Indoor and outdoor use.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Emitter Dimensions (HxWxD): 5.1 x 1.8 x 2.8 inches (130 x 46 x 71 mm).

Reflector Dimensions (HxW): 4.6 x 1.2 inch (117 x 30 mm).

Enclosure Material: Aluminum. Mounting Method: Wall, floor, or post.

Alignment Indicator: Front mounted green LED.

Reflector: MEI authorized, rectangular, corner cube retro reflector.

Range: 30 ft (9 m).

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

** NOTE TO SPECIFIER ** Fail safe and reflector hood are optional. Delete if not required.

Fail safe configuration.

Reflector hood.

Light Curtain:

Model: Monitored Light Curtain (MLC). A series of thru beam photo eyes attached near door track or guides. A dense barrier of light, when interrupted, signals door to reverse. Commercial and industrial door applications.

UL 325 recognized component. IP67 waterproof housing.

Mounting brackets: Included.

Span (WxH): Up to 32 x 6 ft (9.75 to 1.8 m). Range: 32 ft (9.75 m).

Ambient Light: Greater than 100,000 Lux.

Aperture Angle EM: Plus or minus 8 degrees. RX: Plus or minus 15 degrees.

Model No. MLC-K36: 3 ft (1 m). Number of Elements: 8.

Model No. MLC-K72: 6 ft (2 m). Number of Elements: 16.

Supply Voltage: 12-24 VAC/DC.

Temperature Range: -40 to 60 degrees C (-40 to 140 degrees C).

Indoor and outdoor use.

** NOTE TO SPECIFIER ** Delete article if not required.

HANGAR DOORS SENSING EDGES

Hazard Zones: Leading edge of doors.

Style: Direct mount.

Model: MUxx. For custom hangar door edges. A versatile pressure sensitive electric edge custom manufactured to exact specifications for length, width, height and sensitivity. When touched sends signal to controls to stop, and/or reverse operations. Contours to curved surfaces.

Size (HxW): Custom. Profile: Square, rectangular or angled.

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right.

Color: Black.

Color: Gray.

Color: Yellow.

Color: White.

Mounting: Tabs.

** NOTE TO SPECIFIER ** Delete article if not required.

COUNTER TOP GRILLES AND COUNTER TOP DOORS SENSING EDGES

Hazard Zones: Leading edge/bottom of door.

Style: Slide In.

Model ME110: Pressure-sensitive adaptable to a variety of applications. When touched lightly or at an angle, sends a signal to stop and/or reverse operations. Multiple mounting channel designs allow installation on nearly any surface.

ANSI/UL325 recognized component.

Size (HxW): 3/4 x 7/8 inch (18 x 23 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Mounting Channel: ME110-C. Material: PVC.

Mounting Channel: ME110-C2. Material: PVC.

Mounting Channel: ME110-C3. Material: PVC.

Model ME111: Pressure sensitive edge adaptable to a variety of applications. When activated, sends signal to stop and/or reverse operations. Mounting channel designs allow installation on nearly any surface.

ANSI/UL325 recognized component.

Size (HxW): 1-1/2 x 7/8 inch (37 x 22 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Mounting Channel: ME110-C. Material: PVC.

Mounting Channel: ME110-C2. Material: PVC.

Mounting Channel: ME110-C3. Material: PVC.

Model ME113: Pressure sensitive electric edge adaptable to a variety of applications. Manufactured to user specified length, sensitivity and outlet location. When touch activated, it sends signal to stop and/or reverse operations depending application. Retrofits easily to 1-1/4 to 1-1/2 inch (32 to 38 mm) sectional doors with one of our mounting channels.

ANSI/UL325 recognized component.

Size (HxW): 1-9/16 x 1-1/2 inch (39 x 38 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 7 to 12 lbf (3.2 to 5.4 kgf).

Electrical Diagram: 2-wire N.O. configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, Left, right.

Color: Black.

Mounting Channel: ME113-C. Material: PVC.

Mounting Channel: ME113-C2. Material: PVC.

Mounting Channel: ME113-C3. Material: PVC.

Mounting Channel: ME113-C7. Material: PVC.

Model ME120: Ideal for a variety of applications for motorized doors and gates and industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems detecting operator reach in, below lifts to protect from pinch points, and a variety of equipment where touch detection is desired.

UL 325 recognized component.

Size (HxW): 1-15/16 x 1-7/16 inch (49 x 36 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 8 to 13 lbf (3.6 to 5.9 kgf).

Electrical Diagram: 2-wire N.O. configuration. 2 Wire terminated configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME120-C. Material: PVC.

Mounting Channel: ME120-PC. Material: PVC.

Model ME123: Pressure sensitive electric edge adaptable to suit a wide variety of applications. When touch activated, sends electrical signal to controls to stop and/or reverse operations. Designed to fit most sectional doors.

ANSI/UL325 recognized component.

Size (HxW): 1-1/2 x 1-7/8 inch (38 x 48 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 6 to 11 lbf (2.7 to 5 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Style: Field Assembled.

Model CPT210: Sensing . Efficient, effective quick fix for doors and gates. Easily stored on service truck for field assembly. Includes molded end plugs with encapsulated terminated or non-terminated configurations.

IP67, UL 325 recognized component.

Size (HxW): 1-1/8 x 7/8 inch (28 x 23 mm). 50 ft ( m) rolls.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 3 to 5 lbf (1.4 to 2.3 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME120-C3. Material: PVC.

Mounting Channel: ME120-C7. Material: PVC.

Style: Non-Contact.

Model Patriot Z2: Infrared thru-beam photo eye. Travels with the door.

Meets current UL325 standards for commercial door and gate operators.

Size (LxWxH): 2.38 x 2 x 1.25 inch (60 x 51 x 32 mm).

Monitored: MIRM-Z2.

Fail Safe: MIRF-Z2.

Enlosure: NEMA 4, Class 2, IP65. Indoor and outdoor.

Configurations: Photo optics. Accessories, and sensing edges monitored by operator controls. Self-monitoring circuitry.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Range: Up to 50 ft (15 m).

** NOTE TO SPECIFIER ** Delete article if not required.

ONE-PIECE STYLE TILT DOORS SENSING EDGES

** NOTE TO SPECIFIER ** Delete hazard zones, styles, models, and options not required.

Hazard Zones: Leading Edge/Bottom of Door.

Style: Slide In.

Model ME120: Ideal for a variety of applications for motorized doors and gates and industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems detecting operator reach in, below lifts to protect from pinch points, and a variety of equipment where touch detection is desired.

UL 325 recognized component.

Size (HxW): 1-15/16 x 1-7/16 inch (49 x 36 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 8 to 13 lbf (3.6 to 5.9 kgf).

Electrical Diagram: 2-wire N.O. configuration. 2 Wire terminated configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME120-C. Material: PVC.

Mounting Channel: ME120-PC. Material: PVC.

Model ME123: Pressure sensitive electric edge adaptable to suit a wide variety of applications. When touch activated, sends electrical signal to controls to stop and/or reverse operations. Designed to fit most sectional doors.

ANSI/UL325 recognized component; Door, Drapery, Gate, Louver, and Window Operators.

Size (HxW): 1-1/2 x 1-7/8 inch (38 x 48 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 6 to 11 lbf (2.7 to 5 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Model MGO20: Small profile allows versatility to suit a variety of applications from motorized doors and gates to industrial safeguarding on equipment.

ANSI/UL325 recognized component.

Size (HxW): 1-15/16 x 1/7/16 inch (49 x 36 mm).

Length: ____ to nearest 0.25 inches (6 mm) up to 10 ft (3 m).

Configurations: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips. When compressed elements come into contact sending electric signal to motor.

Lead Wire: SJTO 18 gauge, 2 ft (610 mm) long.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME120-C. Material: PVC.

Mounting Channel: ME120-PC. Material: PVC.

Field assembled.

Model CPT223: Provide a quick fix for sectional and rolling doors. Conductive Polymer easily stores on any service truck and assembles in no time. With ME123 mounting channels, can be installed on rolling steel doors or sectional doors 1 1/2 to 2 inches (38 to 51 mm) thick.

ANSI/UL325 recognized component.

Size (HxW): 1-5/8 x 1-11/16 inch (41 x 42 mm).

Extrusion Length: Extruded Flexible PVC 50 and 100 ft ( m).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 7 to 12 lbf (3.2 to 5.4 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Hazard Zones: Interior.

Photo Optics:

Model Rebel: Monitored infrared thru-beam photo eye. Emitting and receiving units. Indoor and outdoor use. Impact Resistant for Rugged Environments.

UL325 compliant for doors.

Monitored: MIRM-S2.

Fail safe: MIRF-S2.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls switch.

Range: 30 ft (9 m).

Range: 50 ft (15 m).

Temperature Range: -40 to 185 degrees F (-40 to 85 degrees C).

Mounting: Vertical or horizontal; wall, floor, or post.

Model Prime-GUARD (PG): Monitored Infra-red thu-beam photo eye and receiving unit. Indoor and outdoor use. Mounts to wall, floor, or post.

UL 325 recognized component for doors and gates.

Enclosure: NEMA 4 enclosure. Aluminum.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Dimensions (HxLxW): 5.1 x 2.8 x 1.8 inches (130 x 71 x 46 mm).

Front mounted green LED alignment indicator.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Wireless battery powered emitter.

Range: 100 ft (30 m).

** NOTE TO SPECIFIER ** Fail safe is optional. Delete if not required.

Fail safe configuration.

Model Reflecti-GUARD (RG): Monitored reflective photo eye; a barrier guarding a hazard or entrapment zone. Indoor and outdoor use.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Emitter Dimensions (HxWxD): 5.1 x 1.8 x 2.8 inches (130 x 46 x 71 mm).

Reflector Dimensions (HxW): 4.6 x 1.2 inch (117 x 30 mm).

Enclosure Material: Aluminum. Mounting Method: Wall, floor, or post.

Alignment Indicator: Front mounted green LED.

Reflector: MEI authorized, rectangular, corner cube retro reflector.

Range: 30 ft (9 m).

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

** NOTE TO SPECIFIER ** Fail safe and reflector hood are optional. Delete if not required.

Fail safe configuration.

Reflector hood.

Light Curtain:

Model: Monitored Light Curtain (MLC). A series of thru beam photo eyes attached near door track or guides. A dense barrier of light, when interrupted, signals door to reverse. Commercial and industrial door applications.

UL 325 recognized component. IP67 waterproof housing.

Mounting brackets: Included.

Span (WxH): Up to 32 x 6 ft (9.75 to 1.8 m). Range: 32 ft (9.75 m).

Ambient Light: Greater than 100,000 Lux.

Aperture Angle EM: Plus or minus 8 degrees. RX: Plus or minus 15 degrees.

Model No. MLC-K36: 3 ft (1 m). Number of Elements: 8.

Model No. MLC-K72: 6 ft (2 m). Number of Elements: 16.

Supply Voltage: 12-24 VAC/DC.

Temperature Range: -40 to 60 degrees C (-40 to 140 degrees C).

Indoor and outdoor use.

** NOTE TO SPECIFIER ** Delete article if not required.

ROLLING SHUTTER DOORS SENSING EDGES

** NOTE TO SPECIFIER ** Delete hazard zones, styles, models, and options not required.

Hazard Zones: Leading Edge/Bottom of Door.

Style: Direct mount.

Model MT21. Custom manufactured specifications for length, width, height and sensitivity. When touched lightly sends signal to controls to stop, and/or reverse operations. Contours to curved surfaces. Acts as a weatherstrip on doors.

ANSI/UL325 recognized component.

Size (HxW): 1 x 2 inches (25 x 51 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity.

Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 6 to 11 lbf (2.7 to 5 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right.

Color: Black.

Color: Gray.

Color: Yellow.

Color: Yellow and black stripes.

Color: Yellow "XR5".

Mounting: Between bottom bars. Horizontal mount.

Model MT22. Pressure-sensitive electric sensing edge custom manufactured to your specifications for length, width, height, and sensitivity. When touched lightly or at an angle, will send an electrical signal to your controls to stop and/or reverse operations. It is completely flexible and will contour to curved surfaces. Device also acts as a weatherstrip.

ANSI/UL325 recognized component.

Size (HxW): 2 x 2 inches (51 x 51 mm).

Length: ____. Plus or minus 0.25 inches ( 6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2' length or 22 gauge universal.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Diagram: 2-wire N.O. configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, left, right.

Color: Black.

Color: Gray.

Color: Yellow.

Color: Yellow and black stripe

Color: Yellow "XR5"

Mounting: Between bottom bars.

Style: Non-Contact.

Model Patriot Z2: Infrared thru-beam photo eye. Travels with the door

Meets current UL325 standards for commercial door and gate operators.

Size (LxWxH): 2.38 x 2 x 1.25 inch (60 x 51 x 32 mm).

Monitored: MIRM-Z2.

Fail Safe: MIRF-Z2.

Enlosure: NEMA 4, Class 2, IP65. Indoor and outdoor.

Configurations: Photo optics. Accessories, and sensing edges monitored by operator controls. Self-monitoring circuitry.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Range: Up to 50 ft (15 m).

Hazard Zones: Interior.

Photo Optics:

Model Rebel: Monitored infrared thru-beam photo eye. Emitting and receiving units. Indoor and outdoor use. Impact Resistant for Rugged Environments.

UL325 Compliant for Doors.

Monitored: MIRM-S2.

Fail safe: MIRF-S2.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Range: 30 ft (9 m).

Range: 50 ft (15 m).

Temperature Range: -40 to 185 degrees F (-40 to 85 degrees C).

Mounting: Vertical or horizontal; wall, floor, or post.

Model Prime-GUARD (PG): Monitored Infra-red thu-beam photo eye and receiving unit. Indoor and outdoor use. Mounts to wall, floor, or post.

UL 325 recognized component for doors and gates.

Enclosure: NEMA 4 enclosure. Aluminum.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Dimensions (HxLxW): 5.1 x 2.8 x 1.8 inches (130 x 71 x 46 mm).

Front mounted green LED alignment indicator.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Wireless battery powered emitter.

Range: 100 ft (30 m).

** NOTE TO SPECIFIER ** Fail safe is optional. Delete if not required.

Fail safe configuration.

Model Reflecti-GUARD (RG): Monitored reflective photo eye; a barrier guarding a hazard or entrapment zone. Indoor and outdoor use.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Emitter Dimensions (HxWxD): 5.1 x 1.8 x 2.8 inches (130 x 46 x 71 mm).

Reflector Dimensions (HxW): 4.6 x 1.2 inch (117 x 30 mm).

Enclosure Material: Aluminum. Mounting Method: Wall, floor, or post.

Alignment Indicator: Front mounted green LED.

Reflector: MEI authorized, rectangular, corner cube retro reflector.

Range: 30 ft (9 m).

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

** NOTE TO SPECIFIER ** Fail safe and reflector hood are optional. Delete if not required.

Fail safe configuration.

Reflector hood.

Light Curtain:

Model: Monitored Light Curtain (MLC). A series of thru beam photo eyes attached near door track or guides. A dense barrier of light, when interrupted, signals door to reverse. Commercial and industrial door applications.

UL 325 recognized component. IP67 waterproof housing.

Mounting brackets: Included.

Span (WxH): Up to 32 x 6 ft (9.75 to 1.8 m). Range: 32 ft (9.75 m).

Ambient Light: Greater than 100,000 Lux.

Aperture Angle EM: Plus or minus 8 degrees. RX: Plus or minus 15 degrees.

Model No. MLC-K36: 3 ft (1 m). Number of Elements: 8.

Model No. MLC-K72: 6 ft (2 m). Number of Elements: 16.

Supply Voltage: 12-24 VAC/DC.

Temperature Range: -40 to 60 degrees C (-40 to 140 degrees C).

Indoor and outdoor use.

** NOTE TO SPECIFIER ** Delete article if not required.

ACCESSORIES FOR SECTIONAL, ROLLING, Bi-FOLD, HANGAR, AND COUNTER TOP DOORS, and COUNTER TOP GRILLES

Accessories:

** NOTE TO SPECIFIER ** Delete accessories and options not required.

Transmitters and receivers.

Controllers.

Coil cords.

Junction boxes.

Interface modules,

Motion sensors.

Pneumatic switches.

Signature Module: Model SM-10x. Emulates a monitored pulsed signal required by some door operators.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

For use with DC and 10K sensing edges.

Air-Wave Switches: Adjustable sensitivity, wireless operation available. Compatible with doors up to 60 ft ( m) in length.

Model AW-10.

Model AW-12.

Model AW-14.

Model AW-14Rf.

Edge Tester: Model MET-101. Determines sensing edge operation and wiring configuration in the field. Auto shut-off.

** NOTE TO SPECIFIER ** Delete article if not required.

SWING GATE SENSING EDGES

Entrapment Zones:

** NOTE TO SPECIFIER ** Delete entrapment zones, models and options not required.

Leading Edge and Bottom Edge of Gate:

Model MGO20: Small profile allows versatility to suit a variety of applications from motorized doors and gates to industrial safeguarding on equipment.

ANSI/UL325 recognized component.

Size (HxW): 1-15/16 x 1/7/16 inch (49 x 36 mm).

Length: ____ to nearest 0.25 inches (6 mm) up to 10 ft (3 m).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Lead Wire: SJTO 18 gauge, 2 ft (610 mm) long.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME120-C. Material: PVC.

Mounting Channel: ME120-PC. Material: PVC.

Model MG Series: For installation on 2 inch (51 mm) round or square frames, offering 3 sided activation for an added measure of protection. When touched, sensors signal gate operator to stop and reverse.

Round Edge. Model MGR20 (HxW). 2-7/8 x 3-5/8 inch (73 x 92 mm).

Square Edge. Model MGR20 (HxW). 2-11/16 x 3-1/4 inch (68 x 83 mm).

Length: ____ to nearest 0.25 inches (6 mm). Max Length: 10 ft (3 m).

ANSI/UL325 recognized component.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24V AC/DC,1/2 amp.

Contact Element: Alumaglas.

Materials: Base: Rigid extruded PVC. Cover: Flexible PVC.

Temperature Range: -30 to 155 degrees F (-34 to 68 degrees C).

Wire Outlet: Universal, left, right.

Color: Black.

Color: Yellow.

Mounting: Mounting tab and screws.

Post/Pivot Point and Post

Model ME110: Pressure-sensitive adaptable to a variety of applications. When touched lightly or at an angle, sends a signal to stop and/or reverse operations. Multiple mounting channel designs allow installation on nearly any surface.

ANSI/UL325 recognized component.

Size (HxW): 3/4 x 7/8 inch (18 x 23 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, left, right.

Color: Black.

Mounting Channel: ME110-C. Material: PVC.

Mounting Channel: ME110-C2. Material: PVC.

Mounting Channel: ME110-C3. Material: PVC.

Model CPT210: Sensing . Efficient, effective quick fix for doors and gates. Easily stored on service truck for field assembly. Includes molded end plugs with encapsulated terminated or non-terminated configurations.

IP67, UL 325 recognized component.

Size (HxW): 1-1/8 x 7/8 inch (28 x 23 mm). 50 ft (15 m) rolls.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 3 to 5 lbf (1.4 to 2.3 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME120-C3. Material: PVC.

Mounting Channel: ME120-C7. Material: PVC.

Exterior

Model Prime-GUARD (PG): Monitored Infra-red thu-beam photo eye and receiving unit. Indoor and outdoor use. Mounts to wall, floor, or post.

UL 325 recognized component for doors and gates.

Enclosure: NEMA 4 enclosure. Aluminum.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Dimensions (HxLxW): 5.1 x 2.8 x 1.8 inches (130 x 71 x 42 mm).

Front mounted green LED alignment indicator.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Wireless battery powered emitter.

Range: 100 ft (30 m).

** NOTE TO SPECIFIER ** Fail safe is optional. Delete if not required.

Fail safe configuration.

Model Reflecti-GUARD (RG): Monitored reflective photo eye; a barrier guarding a hazard or entrapment zone. Indoor and outdoor use.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Emitter Dimensions (HxWxD): 5.1 x 1.8 x 2.8 inches (130 x 46 x 71 mm).

Reflector Dimensions (HxW): 4.6 x 1.2 inch (117 x 30 mm).

Enclosure Material: Aluminum. Mounting Method: Wall, floor, or post.

Alignment Indicator: Front mounted green LED.

Reflector: MEI authorized, rectangular, corner cube retro reflector.

Range: 30 ft (9 m).

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

** NOTE TO SPECIFIER ** Fail safe and reflector hood are optional. Delete if not required.

Fail safe configuration.

Reflector hood.

** NOTE TO SPECIFIER ** Delete article if not required.

SLIDE GATE SENSING EDGES

Entrapment Zones:

** NOTE TO SPECIFIER ** Delete entrapment zones, models and options not required.

Leading Edge and Trailing Edge:

Model MGO20: Small profile allows versatility to suit a variety of applications from motorized doors and gates to industrial safeguarding on equipment.

ANSI/UL325 recognized component.

Size (HxW): 1-15/16 x 1/7/16 inch (49 x 36 mm).

Length: ____ to nearest 0.25 inches (6 mm) up to 10 ft (3 m).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Lead Wire: SJTO 18 gauge, 2 ft (610 mm) long.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME120-C. Material: PVC.

Mounting Channel: ME120-PC. Material: PVC.

Model MG Series: For installation on 2 inch (51 mm) round or square frames, offering 3 sided activation for an added measure of protection. When touched, sensors signal gate operator to stop and reverse.

Round Edge. Model MGR20 (HxW). 2-7/8 x 3-5/8 inch (73 x 92 mm).

Square Edge. Model MGR20 (HxW). 2-11/16 x 3-1/4 inch (68 x 83 mm).

Length: ____ to nearest 0.25 inches (6 mm). Max Length: 10 ft (3 m).

ANSI/UL325 recognized component.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24V AC/DC,1/2 amp.

Contact Element: Alumaglas.

Materials: Base: Rigid extruded PVC. Cover: Flexible PVC.

Temperature Range: -30 to 155 degrees F (-34 to 68 degrees C).

Wire Outlet: Universal, left, right.

Color: Black.

Color: Yellow.

Mounting: Mounting tab and screws.

Model ME123: Pressure sensitive electric edge adaptable to suit a wide variety of applications. When touch activated, sends electrical signal to controls to stop and/or reverse operations. Designed to fit most sectional doors.

ANSI/UL325 recognized component.

Size (HxW): 1-1/2 x 1-7/8 inch (38 x 48 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 6 to 11 lbf (2.7 to 5 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Model ME120: Ideal for a variety of applications for motorized doors and gates and industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems detecting operator reach in, below lifts to protect from pinch points, and a variety of equipment where touch detection is desired.

UL 325 recognized component.

Size (HxW): 1-15/16 x 1-7/16 inch (49 x 36 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 8 to 13 lbf (3.6 to 5.9 kgf).

Electrical Diagram: 2-wire N.O. configuration. 2 Wire terminated configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME120-C. Material: PVC.

Mounting Channel: ME120-PC. Material: PVC.

Model CPT210: Sensing . Efficient, effective quick fix for doors and gates. Easily stored on service truck for field assembly. Includes molded end plugs with encapsulated terminated or non-terminated configurations.

IP67, UL 325 recognized component.

Size (HxW): 1-1/8 x 7/8 inch (28 x 23 mm). 50 ft (15 m) rolls.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 3 to 5 lbf (1.4 to 2.3 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME120-C3. Material: PVC.

Mounting Channel: ME120-C7. Material: PVC.

Model CPT223: Provide a quick fix for sectional and rolling doors. Conductive Polymer easily stores on any service truck and assembles in no time. With ME123 mounting channels, can be installed on rolling steel doors or sectional doors 1 1/2 to 2 inches ( mm) thick.

ANSI/UL325 recognized component.

Size (HxW): 1-5/8 x 1-11/16 inch (41 x 42 mm).

Extrusion Length: Extruded Flexible PVC 50 and 100 ft (30.5 m).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 7 to 12 lbf (3.2 to 5.4 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Interior and Exterior:

Model Prime-GUARD (PG): Monitored Infra-red thu-beam photo eye and receiving unit. Indoor and outdoor use. Mounts to wall, floor, or post.

UL 325 recognized component for doors and gates.

Enclosure: NEMA 4 enclosure. Aluminum.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Dimensions (HxLxW): 5.1 x 2.8 x 1.8 inches (130 x 71 x 46 mm).

Front mounted green LED alignment indicator.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Wireless battery powered emitter.

Range: 100 ft (30 m).

** NOTE TO SPECIFIER ** Fail safe is optional. Delete if not required.

Fail safe configuration.

Model Reflecti-GUARD (RG): Monitored reflective photo eye; a barrier guarding a hazard or entrapment zone. Indoor and outdoor use.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Emitter Dimensions (HxWxD): 5.1 x 1.8 x 2.8 inches (130 x 46 x 71 mm).

Reflector Dimensions (HxW): 4.6 x 1.2 inch (117 x 30 mm).

Enclosure Material: Aluminum. Mounting Method: Wall, floor, or post.

Alignment Indicator: Front mounted green LED.

Reflector: MEI authorized, rectangular, corner cube retro reflector.

Range: 30 ft (9 m).

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

** NOTE TO SPECIFIER ** Fail safe and reflector hood are optional. Delete if not required.

Fail safe configuration.

Reflector hood.

Center (Draw-In) Post and Pocket

Model ME110: Pressure-sensitive adaptable to a variety of applications. When touched lightly or at an angle, sends a signal to stop and/or reverse operations. Multiple mounting channel designs allow installation on nearly any surface.

ANSI/UL325 recognized component.

Size (HxW): 3/4 x 7/8 inch (18 x 23 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Mounting Channel: ME110-C. Material: PVC.

Mounting Channel: ME110-C2. Material: PVC.

Mounting Channel: ME110-C3. Material: PVC.

Model CPT210: Sensing . Efficient, effective quick fix for doors and gates. Easily stored on service truck for field assembly. Includes molded end plugs with encapsulated terminated or non-terminated configurations.

IP67, UL 325 recognized component.

Size (HxW): 1-1/8 x 7/8 inch (28 x 23 mm). 50 ft (15 m) rolls.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 3 to 5 lbf (1.4 to 2.3 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME120-C3. Material: PVC.

Mounting Channel: ME120-C7. Material: PVC.

** NOTE TO SPECIFIER ** Delete article if not required.

CANTILEVER GATE SENSING EDGES

Entrapment Zone:

** NOTE TO SPECIFIER ** Delete entrapment zones, models and options not required.

Guide (Draw-In) Posts

Model ME110: Pressure-sensitive adaptable to a variety of applications. When touched lightly or at an angle, sends a signal to stop and/or reverse operations. Multiple mounting channel designs allow installation on nearly any surface.

ANSI/UL325 recognized component.

Size (HxW): 3/4 x 7/8 inch (18 x 23 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Lead Wire: SJTO, 22 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24 VAC/DC, 1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Mounting Channel: ME110-C. Material: PVC.

Mounting Channel: ME110-C2. Material: PVC.

Mounting Channel: ME110-C3. Material: PVC.

Model CPT210: Sensing . Efficient, effective quick fix for doors and gates. Easily stored on service truck for field assembly. Includes molded end plugs with encapsulated terminated or non-terminated configurations.

IP67, UL 325 recognized component.

Size (HxW): 1-1/8 x 7/8 inch (28 x 23 mm). 50 ft ( m) rolls.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 3 to 5 lbf (1.4 to 2.3 kgf).

Lead Wire: 22 gauge 18 inch ( 457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24 V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME120-C3. Material: PVC.

Mounting Channel: ME120-C7. Material: PVC.

Leading Edge and Trailing Edge:

Model ME120: Ideal for a variety of applications for motorized doors and gates and industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems detecting operator reach in, below lifts to protect from pinch points, and a variety of equipment where touch detection is desired.

UL 325 recognized component.

Size (HxW): 1-15/16 x 1-7/16 inch (49 x 36 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 8 to 13 lbf (3.6 to 5.9 kgf).

Electrical Diagram: 2-wire N.O. configuration. 2 Wire terminated configuration.

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME120-C. Material: PVC.

Mounting Channel: ME120-PC. Material: PVC.

Model MGO20: Small profile allows versatility to suit a variety of applications from motorized doors and gates to industrial safeguarding on equipment.

ANSI/UL325 recognized component.

Size (HxW): 1-15/16 x 1/7/16 inch (49 x 36 mm).

Length: ____ to nearest 0.25 inches (6 mm) up to 10 ft (3 m).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Lead Wire: SJTO 18 gauge, 2 ft (610 mm) long.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: End, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME120-C. Material: PVC.

Mounting Channel: ME120-PC. Material: PVC.

Model MG Series: For installation on 2 inch (51 mm) round or square frames, offering 3 sided activation for an added measure of protection. When touched, sensors signal gate operator to stop and reverse.

Round Edge. Model MGR20 (HxW). 2-7/8 x 3-5/8 inch (73 x 92 mm).

Square Edge. Model MGR20 (HxW). 2-11/16 x 3-1/4 inch (68 x 83 mm).

Length: ____ to nearest 0.25 inches (6 mm). Max Length: 10 ft (3 m).

ANSI/UL325 recognized component.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length.

Sensitivity: Nominal 4 to 7 lbf (1.8 x 3.2 kgf).

Electrical Maximum: 24V AC/DC,1/2 amp.

Contact Element: Alumaglas.

Materials: Base: Rigid extruded PVC. Cover: Flexible PVC.

Temperature Range: -30 to 155 degrees F (-34 to 68 degrees C).

Wire Outlet: Universal, left, right.

Color: Black.

Color: Yellow.

Mounting: Mounting tab and screws.

Model ME123: Pressure sensitive electric edge adaptable to suit a wide variety of applications. When touch activated, sends electrical signal to controls to stop and/or reverse operations. Designed to fit most sectional doors.

ANSI/UL325 recognized component.

Size (HxW): 1-1/2 x 1-7/8 inch (38 x 48 mm).

Length: ____ to nearest 0.25 inches (6 mm).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Configuration: Air Waves: Non-monitored. Adjustable sensitivity. Flexible hose connected to an air switch.

Configuration: Pneumatic. Non-monitored. Flexible hose, pneumatic switch.

Lead Wire: SJTO, 18 gauge, 2 ft (610 mm) length or 22 gauge universal.

Sensitivity: Nominal 6 to 11 lbf (2.7 to 5 kgf).

Electrical Maximum: 24 VAC/DC,1/2 amp.

Contact Element: Alumaglas.

Temperature Range: -30 to 155 degrees F (-34.4 to 68.3 degrees C).

Wire Outlet: Universal, end, Left, right.

Color: Black.

Color: Yellow.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Model CPT210: Sensing . Efficient, effective quick fix for doors and gates. Easily stored on service truck for field assembly. Includes molded end plugs with encapsulated terminated or non-terminated configurations.

IP67, UL 325 recognized component.

Size (HxW): 1-1/8 x 7/8 inch (28 x 23 mm). 50 ft (15 m) rolls.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 3 to 5 lbf (1.4 to 2.3 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME120-C3. Material: PVC.

Mounting Channel: ME120-C7. Material: PVC.

Model CPT223: Provide a quick fix for sectional and rolling doors. Conductive Polymer easily stores on any service truck and assembles in no time. With ME123 mounting channels, can be installed on rolling steel doors or sectional doors 1-1/2 to 2 inches (38 to 51 mm) thick.

ANSI/UL325 recognized component.

Size (HxW): 1-5/8 x 1-11/16 inch (41 x 42 mm).

Extrusion Length: Extruded Flexible PVC 50 and 100 ft (30.5 m).

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Configuration: Electric. Edges contain two conductive strips.

Sensitivity: nominal 7 to 12 lbf (3.2 to 5.4 kgf).

Lead Wire: 22 gauge 18 inch (457 mm).

Wire Outlet Location: Universal.

Electrical Max: 24V AC/DC.

Contact Element: "CPT" Conductive Polymer Technology.

Wire Outlet: Universal.

Color: Black.

Mounting Channel: ME123-C. Material: PVC.

Mounting Channel: ME123-C1. Material: PVC.

Mounting Channel: ME123-C2175. Material: PVC.

Mounting Channel: ME123-C3. Material: PVC.

Mounting Channel: ME123-CA3. Material: PVC.

Mounting Channel: ME123-C7. Material: PVC.

Interior and Exterior:

Model Prime-GUARD (PG): Monitored Infra-red thu-beam photo eye and receiving unit. Indoor and outdoor use. Mounts to wall, floor, or post.

UL 325 recognized component for doors and gates.

Enclosure: NEMA 4 enclosure. Aluminum.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Dimensions (HxLxW): 5.1 x 2.8 x 1.8 inches (130 x 71 x 46 mm).

Front mounted green LED alignment indicator.

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

Wireless battery powered emitter.

Range: 100 ft (30 m).

** NOTE TO SPECIFIER ** Fail safe is optional. Delete if not required.

Fail safe configuration.

Model Reflecti-GUARD (RG): Monitored reflective photo eye; a barrier guarding a hazard or entrapment zone. Indoor and outdoor use.

Configuration: Photo optics. Accessories, and sensing edges monitored by operator controls.

Emitter Dimensions (HxWxD): 5.1 x 1.8 x 2.8 inches (130 x 46 x 71 mm).

Reflector Dimensions (HxW): 4.6 x 1.2 inch (117 x 30 mm).

Enclosure Material: Aluminum. Mounting Method: Wall, floor, or post

Alignment Indicator: Front mounted green LED.

Reflector: MEI authorized, rectangular, corner cube retro reflector.

Range: 30 ft (9 m).

Operating Temp. Range: -40 to 185 degrees F (-40 to 85 degrees C).

** NOTE TO SPECIFIER ** Fail safe and reflector hood are optional. Delete if not required.

Fail safe configuration.

Reflector hood.

EXECUTION

EXAMINATION

Do not begin installation until substrates have been properly constructed and prepared.

If substrate preparation is the responsibility of another installer, notify Architect in writing of unsatisfactory preparation before proceeding.

PREPARATION

Clean surfaces thoroughly prior to installation.

Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

INSTALLATION

Install in accordance with manufacturer's instructions approved submittals and in proper relationship with adjacent construction.

FIELD QUALITY CONTROL

Field Inspection: Coordinate field inspection in accordance with appropriate sections in Division 01.

** NOTE TO SPECIFIER ** Include if manufacturer provides field quality control with onsite personnel for instruction or supervision of product installation, application, erection or construction. Delete if not required.

Manufacturer's Services: Coordinate manufacturer's services in accordance with appropriate sections in Division 01.

CLEANING AND PROTECTION

Clean products in accordance with the manufacturers recommendations.

Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download