ChinaFastener.com
Abdulaziz Ahmed Khamis Al-Zuraiq Est.Dammam: +966 3 8328380 Fax: +966 3 8326744 Email: headoffice@4am- 27th Feb 2013China Fastener MagazineChina Tel: +86-20-22820122Fax: +86-20-22820111Attn: Ms. Plumeria,Dear Ma’am,Please quote for the following:SR. NO.DESCRIPTIONQTY00007BOLT ASSEMBLY MACHINE; M22 X 2.5 MM X 90 MM,HEX HEAD,SS,ASTMA193 BOLT,BOLT GR GR B8,COLD WORK BOLT,22 MM DIA,90 MM LG,2.5 MMPITCH THD,FULL THREAD THD LG,HEX NUT,1 NUT (S),ASTM A193 NUT,NUTGR GR 8NNA00013BOLT ASSEMBLY MACHINE; M10 X 1.5 X 35 MM,HEX HEAD,STEEL,CADMIUMPLATED BOLT,M10 DIA,10 MM LG,1.5 MM THD,UNC THD SER,35 MM THDLG,HEAVY HEX NUT,1 NUT (S),CADMIUM PLATED NUT,FOR TURBOCHARGERNA00014BOLT ASSEMBLY MACHINE; 5/8 IN - 11 X 50.8 MM (2 IN),HEXHEAD,SS,FULL BODY,ASTM F593 BOLT,COLD FORMED FROM ANNEALED STOCKBOLT,5/8 IN DIA,50.8 MM (2 IN) LG,11 THD,UNC-2A THD SER,FULL THDLG,HEAVY HEX NUT,1 NUT (S),ASTM F594 (EXCEPT TYPE 310 OR UNSS31000 OR DIN 1.4465 OR DIN 1.4577) NUT,WITH NUT SCREWED ON,UNC-2B THREADED NUT, MARK MANUFACTURER IDENTIFICATION & 30,INDIVIDUAL THREAD PROTECTION, PACKAGING SPEC 8444-21 APPLIES,MIN BOLT PROPERTIES OF MACHINED SPECIMENS, TENSILE STRENGTH 80KSI (550 MPA), YIELD STRENGTH 40 KSI (365 MPA), 0.2% YIELDSTRENGTH 50 KSI (335 MPA), HARDNESS ROCKWELL HRB 83 TO HRC 28NA00015BOLT ASSEMBLY MACHINE; 3/4 IN - 10 X 50.8 MM (2 IN),HEXHEAD,SS,FULL BODY,ASTM F593 BOLT,COLD FORMED FROM ANNEALED STOCKBOLT,3/4 IN DIA,50.8 MM (2 IN) LG,10 THD,UNC-2A THD SER,FULL THDLG,HEAVY HEX NUT,1 NUT (S),ASTM F594 (EXCEPT TYPE 310 OR UNSS31000 OR DIN 1.4465 OR DIN 1.4577) NUT,WITH NUT SCREWED ON,UNC-2B THREADED NUT, MARK MANUFACTURER IDENTIFICATION & 30,INDIVIDUAL THREAD PROTECTION, PACKAGING SPEC 8444-21 APPLIES,MIN BOLT PROPERTIES OF MACHINED SPECIMENS, TENSILE STRENGTH 80KSI (550 MPA), YIELD STRENGTH 40 KSI (365 MPA), 0.2% YIELDSTRENGTH 50 KSI (335 MPA), HARDNESS ROCKWELL HRB 83 TO HRC 28NA00018BOLT ASSEMBLY MACHINE; M20 X 2.5 X 90 MM,HEX HEAD,SS,ASTM A193BOLT,BOLT GR GR B8,NATURAL BOLT,20 MM DIA,90 MM LG,2.5 MM PITCHTHD,FULL THREAD THD LG,HEX NUT,1 NUT (S),ASTM A193 NUT,NUT GR GR8N,NATURAL NUTNA00019BOLT ASSEMBLY MACHINE; M16 X 2 X 70 MM,HEX HEAD,SS,ASTM A193BOLT,BOLT GR GR B8,NATURAL BOLT,16 MM DIA,70 MM LG,2 MM PITCHTHD,FULL THREAD THD LG,HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR GR8N,NATURAL NUTNA00024BOLT MACHINE; M36 X 4 X 110 MM,HEX HEAD,CS,36 MM DIA,110 MM LG,4MM PITCH THD,ISO COARSE THD SER,78 MM THD LG,BOLT WITH 1 WASHERNA00025BOLT MACHINE; M24 X 75 MM,HEX HEAD,FULL BODY,STEEL,NATURAL,24 MMDIA,75 MM LG,3 MM PITCH THD,ISO COARSE THD SER,54 MM THD LG,ANSIB18.2.1,BOLT WITH 1 WASHERNA00026BOLT MACHINE; M36 X 110 MM,HEX HEAD,CS,36 MM DIA,110 MM LG,4 MMPITCH THD,ISO COARSE THD SER,78 MM THD LGNA00027BOLT MACHINE; M30 X 95 MM,HEX HEAD,CS,30 MM DIA,95 MM LG,3.5 MMPITCH THD,ISO COARSE THD SER,66 MM THD LGNA00036BOLT ASSEMBLY; SHELL MANHOLE TYPE,5/8-11 X 60 MM,HEX HEAD,CARBONSTEEL,ASTM A307 BOLT,BOLT GR B,BLACK BOLT,5/8 IN DIA,60 MM LG,11TPI THD,ANSI B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A307 NUT,NUT GRB,BLACK NUT,ANSI B18.2.2 NUTNA00037BOLT ASSEMBLY U; ROUND BEND SHAPE,M6 X 1 X40 MM,SS,AISI 316L,GR316L,25.4 MM (1 IN) PIPE NPS,6 MM DIA,1 MM PITCH THD,ISO COARSETHD SER,44 MM (1.732 IN) INSIDE W,45 MM (1.772 IN) INSIDEL,HEAVY HEX NUT,4 NUT (S),AISI 316L (UNI 5588) NUT,NUT GR 316LNA00038BOLT; 0.3125 -18 X 0.725,HEX HEAD,STEEL,BLACK,0.3125 INDIA,0.725 IN LG,18 TPI THD,UNC THD SER,0.725 THD LGNA00046BOLT MACHINE; M16 X 2 X 90 MM,HEX HEAD,ALLOY STEEL,ISO 4017,GR8.8,PHOSPHATED & OILED,16 MM DIA,90 MM LG,2 MM PITCH THD,ISOMETRIC COARSE-6G THD SER,FULL THD LGNA00048BOLT ASSEMBLY MACHINE; 1/2-13 X 1 IN,HEX HEAD,SS,BOLT GR310S,NATURAL BOLT,1/2 IN DIA,25.4 MM (1 IN) LG,13 THD,UNC-2A/2BTHD SER,FULL THD LG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT(S),NUT GR 310S,NATURAL NUT,ANSI/ASME B18.2.2 NUT,ANSI/ASMEB1.1,WITH NUTS SCREWED ONNA00049BOLT ASSEMBLY MACHINE; 1/2-13 X 3-1/2 IN,HEX HEAD,SS,FULLBODY,BOLT GR 310S,NATURAL BOLT,12.7 MM (1/2 IN) DIA,88.9 MM(3-1/2 IN) LG,13 THD,UNC-2A/2B THD SER,31.75 MM (1-1/4 IN) THDLG,ANIS/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),NUT GR310S,NATURAL NUT,ANSI/ASME B18.2.2 NUT,ANSI B1.1,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00050BOLT ASSEMBLY MACHINE; 3/4-10 X 2 IN,HEX HEAD,CS,SAE J429BOLT,BOLT GR 5,LIGHT OILED BOLT,3/4 IN DIA,50.8 MM (2 IN) LG,10THD,UNC-2A/2B THD SER,FULL THD LG,ANSI/ASME B18.2.1 BOLT,HEAVYHEX NUT,1 NUT (S),SAE J995 NUT,NUT GR 5,LIGHT OILEDNUT,ANSI/ASME B18.2.2 NUT,WITH NUT AND PLAIN WASHER SCREWED ONNA00052BOLT ASSEMBLY; GALV SHEET METAL, ROOFING TYPE,M8 X 1.25 X 40MM,MUSHROOM HEAD,CS,ZINC PLATED BOLT,8 MM DIA,40 MM LG,1.25 MMPITCH THD,FULL THD LG,SQUARE NUT,1 NUT (S),ZINC PLATEDNUT,ROOFING-SIDING ACCESSORY, WITH SQUARE NUT & BLACK WASHERSEAL, SEAL 58NA00053BOLT ASSEMBLY; GALV SHEET METAL, ROOFING TYPE,M8 X 1.25 X 160MM,MUSHROOM HEAD,CS,ZINC PLATED BOLT,8 MM DIA,160 MM LG,1.25 MMPITCH THD,75 MM THD LG,SQUARE NUT,1 NUT (S),ZINC PLATED NUT,ROOFING-SIDING ACCESSORY, WITH SQUARE NUT & BLACK WASHERSEAL, SEAL 58NA00054BOLT ASSEMBLY; GALV SHEET METAL, ROOFING TYPE,M8 X 1.25 X 180MM,MUSHROOM HEAD,CS,ZINC PLATED BOLT,8 MM DIA,180 MM LG,1.25 MMPITCH THD,75 MM THD LG,SQUARE NUT,1 NUT (S),ZINC PLATEDNUT,ROOFING-SIDING ACCESSORY, WITH SQUARE NUT & BLACK WASHERSEAL, SEAL 58NA00055BOLT MACHINE; 1/2-13 X 1-1/2,HEX HEAD,FULL BODY,STAINLESSSTEEL,GR AISI 316L,1/2 IN DIA,1-1/2 IN LG,13 THD,UNC-2A THDSER,1-1/4 IN THD LG,ANSI B18.2.1NA00056BOLT MACHINE; 1/2-13 X 4,HEX HEAD,FULL BODY,STAINLESS STEEL,GRAISI 316L,1/2 IN DIA,4 IN LG,13 THD,UNC-2A THD SER,1-1/4 IN THDLG,ANSI B18.2.1NA00057BOLT MACHINE; 5/8-11 X 2-1/2,HEX HEAD,FULL BODY,STAINLESSSTEEL,GR AISI 316L,5/8 IN DIA,2-1/2 IN LG,11 THD,UNC-2A THDSER,1-1/2 IN THD LG,ANSI B18.2.1NA00058BOLT MACHINE; 1/2-13 X 2-1/2,HEX HEAD,FULL BODY,STAINLESSSTEEL,GR AISI 316L,1/2 IN DIA,2-1/2 IN LG,13 THD,UNC-2A THDSER,1-1/4 IN THD LG,ANSI B18.2.1NA00059BOLT MACHINE; 5/16-18 X 1-1/2,HEX HEAD,FULL BODY,SS,GR AISI316L,NATURAL,5/16 IN DIA,1-1/2 IN LG,18 THD,UNC-2A THD SER,1 INTHD LG,ANSI B18.2.1NA00067BOLT ASSEMBLY MACHINE; 3/4-10 X 4 0 MM,HEX HEAD,ALLOY STEEL,FULLBODY,ASTM A240 BOLT,BOLT GR TYPE 405,NATURAL BOLT,3/4 IN DIA,40MM LG,10 THD,UNC-2A/2B THD SER,30 MM THD LG,ANSI/ASME B1.1BOLT,HEX NUT,ASTM A240 NUT,NUT GR TYPE 405,NATURAL NUT,ANSI/ASMEB18.2.2 NUT,ANSI/ASME B1.1, ANSI/ASME B18.2.2,WITH NUTSCREWED-ON, HEAD MARKED, USED ON INTERNAL PIPENA00068BOLT ASSEMBLY MACHINE; 5/8-11 X 45 MM,HEX HEAD,ALLOY STEEL,FULLBODY,ASTM A240 BOLT,BOLT GR TYPE 405,NATURAL BOLT,5/8 IN NDIA,45 MM LG,11 THD,UNC-2A/2B THD SER,30 MM THD LG,ANSI/ASMEB1.1 BOLT,HEX NUT,1 NUT (S),ASTM A240 NUT,NUT GR TYPE405,NATURAL NUT,WITH NUT SCREWED-ON, MARKE AISI 405, USED ONINTERNAL PIPENA00069BOLT ASSEMBLY MACHINE; 3/8-15 X 25 MM,HEX HEAD,ALLOY STEEL,FULLBODY,ASTM A240 BOLT,BOLT GR TYPE 405,NATURAL BOLT,3/8 IN DIA,25MM LG,16 THD,UNC-2A/2B THD SER,20 MM THD LG,ANSI/ASME B1.1BOLT,HEX NUT,1 NUT (S),ASTM A240 NUT,NUT GR TYPE 405,NATURALNUT,ANSI/ASME B18.2.2 NUT,USED ON FCC UNIT ACCUMULATOR TRAYNA00070BOLT ASSEMBLY MACHINE; 1/2-13 X 40 MM,HEX HEAD,ALLOY STEEL,FULL BODY,ASTM A240 BOLT,BOLT GR TYPE 405,NATURAL BOLT,1/2 IN DIA,40MM LG,13 THD,UNC-2A/2B THD SER,30 MM THD LG,ANSI/ASME B1.1BOLT,HEX NUT,1 NUT (S),ASTM A240 NUT,NUT GR YYPE 240,NATURALNUT,ANSI/ASME B18.2.2 NUT,USE ON JFV207 LCO ACCUMULATOR TRAYNA00071BOLT ASSEMBLY MACHINE; 1/2-13 X 14 IN,HEX HEAD,CARBON STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A OR B,GALVANIZED BOLT,1/2 INDIA,355.6 MM (14 IN) LG,13 THD,UNC-2A/2B THD SER,1-7/8 IN THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,GALVANIZED NUT,ANSI/ASME B18.2.2 NUT,ANSI/ASME B1.1,WITH NUTSCREWED-ON. PACKING SPECS 8444-21 APPLIES.NA00076BOLT ASSEMBLY MACHINE; 3/4-10 X 4-1/4 IN,HEX HEAD,ALLOYSTEEL,ASTM A193 BOLT,BOLT GR B7,PHOSPHATED & LIGHT OILEDBOLT,3/4 IN DIA,107.95 MM (4-1/4 IN) LG,10 THD,UNC-2A/2B THDSER,44.45 MM (1-3/4 IN) THD LG,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1NUT (S),ASTM A 194 NUT,NUT GR 2H,PHOSPHATED & LIGHT OILEDNUT,ANSI B 18.2.2 NUT,ANSI/ASME B1.1,PACKING SPEC 844421 APPLIES.NA00077BOLT ASSEMBLY MACHINE; M39 X 4 X 150 MM,HEX HEAD,STEEL,ISO 898-1OR ASTM F568 OR DIN EN 20898-1 BOLT,BOLT GR 5.6,BLACK BOLT,39 MMDIA,150 MM LG,4 MM PITCH THD,ISO METRIC COARSE 6H/6G THD SER,100MM THD LG,ISO 4014 OR ANSI B18.2.3.5 M OR DIN EN 24014BOLT,HEAVY HEX NUT,1 NUT (S),ISO 898-2 OR ASTM A563M OR DIN EN20898-2 NUT,BLACK NUT,ISO 4033 OR ANSI B18.2.4 M OR DIN EN 24033NUT,PACKING SPEC 844404 APPLIES.NA00079BOLT U; ROUND BEND SHAPE,M6 X 1 X 32 MM X 21 MM X 22 MM,CARBONSTEEL,CS,6 MM DIA,1 MM PITCH THD,ISO METRIC COARSE THD SER,22 MMTHD LG,21 MM INSIDE W,32 MM INSIDE L,M6, FOR TANK HALON SYSTEMNA00088BOLT MACHINE; M6 X 1 X 15 MM,HEX HEAD,CS,ZINC PLATED,M6 DIA,15MM LG,1 MM PITCH THD,FULL THD LGNA00089BOLT MACHINE; M16 X 2 X 50 MM,HEX HEAD,BRASS,ISO 8839,16 MMDIA,50 MM LG,2 MM PITCH THD,ISO METRIC COARSE-6G THD SER,38 MM THD LG,ISO 4014NA00090BOLT MACHINE; M16 X 2 X 90 MM,HEX HEAD,BRASS,16 MM DIA,90 MMLG,2 MM PITCH THD,METRIC COARSE THD SERNA00091BOLT ASSEMBLY MACHINE; M24 X 3 X 115 MM,HEX HEAD,CS,FULLBODY,ISO 898-1 OR F568 BOLT,BOLT GR 5.6,LIGHT OILED BOLT,24 MMDIA,115 MM LG,3 MM PITCH THD,ISO METRIC COARSE-6H/6G THD SER,60MM THD LG,ISO 4014 BOLT,HEX NUT,1 NUT (S),ISO 898-2 OR ASTMA563M NUT,NUT GR 6 OR 8,LIGHT OILED NUT,ISO 4032 NUT,WITH NUTSCREWED-ON, PACKING SPEC 8444-21 APPLIESNA00092BOLT ASSEMBLY MACHINE; M6 X 1 X 25 MM,HEX HEAD,CS,FULL BODY,ISO898-I BOLT,BOLT GR 8.8,NATURAL, LIGHT OILED BOLT,6 MM DIA,25 MMLG,1 MM PITCH THD,ISO METRIC COARSE - 6G/6H THD SER,25 MM THDLG,ISO 4017 BOLT,HEX NUT,1 NUT (S),ISO 898-II NUT,NUT GR8,NATURAL, LIGHT OILED NUT,ISO 4032 NUT,WITH NUT AND PLAINWASHER, CHAMFERED END, FULLY THREADED, DIN 933NA00093BOLT ASSEMBLY MACHINE; M6 X 1 X 30 MM,HEX HEAD,CS,ISO 898-IBOLT,BOLT GR 8.8,NATURAL, LIGHT OILED BOLT,6 MM DIA,30 MM LG,1MM PITCH THD,ISO METRIC COARSE - 6G/6H THD SER,30 MM THD LG,ISO4017 BOLT,HEX NUT,1 NUT (S),ISO 898-II NUT,NUT GR 8,NATURAL,LIGHT OILED NUT,ISO 4032 NUT,WITH NUT AND PLAIN WASHER,CHAMFERED ENDS, FULLY THREADED, DIN 933NA00094BOLT ASSEMBLY MACHINE; M6 X 1 X 70 MM,HEX HEAD,CS,ISO 898-IBOLT,BOLT GR 8.8,NATURAL, LIGHT OILED BOLT,6 MM DIA,70 MM LG,1MM PITCH THD,ISO METRIC COARSE - 6G/6H THD SER,70 MM THD LG,ISO4017 BOLT,HEX NUT,1 NUT (S),ISO 898-II NUT,NUT GR 8,NATURAL,LIGHT OILED NUT,ISO 4032 NUT,WITH NUT AND PLAIN WASHER,CHAMFERED ENDS, FULLY THREAD, DIN 933NA00095BOLT ASSEMBLY MACHINE; M8 X 1.25 X 60 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,8 MM DIA,60 MM LG,1.25 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,60 MM THD LG,ISO 4017BOLT,HEX NUT,1 NUT (S),8 NUT,NUT GR NATURAL, LIGHT OILED,ISO4032 NUT,WITH NUT AND PLAIN WASHER, CHAMFERED ENDS, FULLYTHREADED, DIN 933NA00096BOLT ASSEMBLY MACHINE; M8 X 1.25 X 70 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,8 MM DIA,70 MM LG,1.25 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,70 MM THD LG,ISO 4017BOLT,HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILED NUT,ISO4032 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN 933NA00097BOLT ASSEMBLY MACHINE; M8 X 1.25 X 100 MM,HEX HEAD,CS,ISO 898-IBOLT,BOLT GR 8.8,NATURAL, LIGHT OILED BOLT,8 MM DIA,100 MMLG,1.25 MM PITCH THD,ISO METRIC COARSE - 6G/6H THD SER,100 MMTHD LG,ISO 4017 BOLT,HEX NUT,1 NUT (S),ISO 898-II NUT,NUT GR8,NATURAL, LIGHT OILED NUT,ISO 4032 NUT,WITH NUT AND PLAINWASHER, CHAMFERED ENDS, FULLY THREADED, DIN 933NA00098BOLT ASSEMBLY MACHINE; 1-1/8-8 X 8-3/4 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B7,NATURAL BOLT,1-1/8 IN DIA,8-3/4 IN LG,8 TPITHD,UNC THD SER,3-1/2 IN THD LG,ANSI B18.2.1 BOLT,HEAVY HEXNUT,1 NUT (S),ASTM A194 NUT,NUT GR 2H,NATURAL NUT,ANSI B18.2.2NUT,WITH NUTS AND SPRING WASHER, NON STD DIA, FOR NOZZLE NO. N3NA00099BOLT ASSEMBLY MACHINE; M10 X 1.5 X 45 MM,HEX HEAD,STEEL,BOLT GR10.9,PHOSPHATED & LIGHT OILED BOLT,10 MM DIA,45 MM LG,1.5 MMPITCH THD,ISO METRIC COARSE - 6G/6H THD SER,26 MM THD LG,ISO4014 BOLT,HEX NUT,1 NUT (S),NUT GR 10,PHOSPHATED & LIGHT OILEDNUT,ISO 4032 NUT,ASTM F1137, GR INA00100BOLT ASSEMBLY MACHINE; M4 X 0.7 X 30 MM,HEX HEAD,STEEL,ISO 898-IBOLT,BOLT GR 8.8,NATURAL, LIGHT OILED BOLT,4 MM DIA,30 MM LG,0.7MM PITCH THD,ISO METRIC COARSE - 6G/6H THD SER,30 MM THD LG,ISO4017 BOLT,HEX NUT,1 NUT (S),ISO 898-II NUT,NUT GR 8,NATURAL,LIGHT OILED NUT,ISO 4032 NUT,WITH NUT AND PLAIN WASHER,CHAMFERED ENDS, FULLY THREADED, DIN 933NA00101BOLT ASSEMBLY MACHINE; M20 X 2.5 X 60 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,20 MM DIA,60 MM LG,2.5 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,60 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00102BOLT ASSEMBLY MACHINE; M22 X 2.5 X 40 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,22 MM DIA,40 MM LG,2.5 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,40 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 9,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00103BOLT ASSEMBLY MACHINE; M24 X 3 X 80 MM,HEX HEAD,STEEL,ASTM F568BOLT,BOLT GR 8.8,NATURAL, LIGHT OILED BOLT,24 MM DIA,80 MM LG,3MM PITCH THD,ISO METRIC COARSE - 6G/6H THD SER,80 M THD LG,ISO4017 BOLT,THICK HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR9,NATURAL, LIGHT OILED NUT,ISO 4033 NUT,WITH NUT AND PLAINWASHER, CHAMFERED ENDS, FULLY THREADED, DIN 933NA00104BOLT ASSEMBLY MACHINE; 1/4-20 X 2-3/16 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR AISI 316,NATURAL BOLT,1/4 IN DIA,55.6 MM (2-3/16IN) LG,20 TPI THD,UNC-2A/2B THD SER,19.1 MM (3/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194NUT,NUT GR AISI 316,NATURAL NUT,ANSI/ASME B18.2.2 NUT,ANSI/ASMEB1.1,WITH NUT, NOT FULLY THREADEDNA00105BOLT ASSEMBLY MACHINE; 5/16-18 X 1 IN,HEX HEAD,STEEL,SAE J429BOLT,BOLT GR 5,NATURAL, LIGHT OILED BOLT,5/16 IN DIA,25.4 MM (1IN) LG,18 TPI THD,UNC-2A/2B THD SER,25.4 MM (1 IN) THDLG,ANSI/ASME B1.1, ASME/ANSI B18.2.1 BOLT,HEAY HEX NUT,1 NUT(S),SAE J995 NUT,NUT GR 5,NATURAL, LIGHT OILED NUT,ANSI/ASMEB1.1, ASME/ANSI B18.2.2 NUT,WITH NUT AND PLAIN WASHER, FULLYTHREADED, NC COARSE, METRIC GR 8.8NA00106BOLT ASSEMBLY MACHINE; 5/8-11 X 3 IN,HEX HEAD,STEEL,BOLT GR8.8,NATURAL BOLT,5/8 IN DIA,3 IN LG,11 TPI THD,UNC-2A/2B THDSER,1-1/4 IN THD LG,ANSI B1.1.2A BOLT,HEAVY HEX NUT,1 NUT(S),NUT GR 15-21,NATURAL NUT,ANSI B1.1.2B NUT,WITH NUTS ANDSPRING WASHER, FOR NOZZLE NO. N5 AND N7NA00107BOLT ASSEMBLY MACHINE; 5/8-11 X 3 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B7,NATURAL BOLT,5/8 IN DIA,3 IN LG,11 TPITHD,UNC-2A/2B THD SER,1-3/4 IN THD LG,ANSI/ASME B18.2.1BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 2H,NATURALNUT,ANSI/ASME B18.2.2 NUT,ANSI/ASME B1.1,WITH NUTS AND SPRINGWASHER, FOR NOZZLE NO. N6NA00108BOLT ASSEMBLY MACHINE; 3/8-16 X 2-3/16 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR AISI 316,NATURAL BOLT,3/8 IN DIA,55.6 MM (2-3/16IN) LG,16 TPI THD,UNC-2A/2B THD SER,55.6 MM (2-3/16 IN) THD LG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194NUT,NUT GR AISI 316,NATURAL NUT,ANSI/ASME B18.2.2 NUT,FULLYTHREADEDNA00109BOLT ASSEMBLY MACHINE; 1/2-13 X 4-3/4 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR AISI 304,NATURAL BOLT,1/2 IN DIA,120.7 MM (4-3/4IN) LG,13 TPI THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THDLG,ANSI B18.2.1 BOLT,HEAVY HEX NUT,2 NUT (S),ASTM A194 NUT,NUTGR AISI-304,NATURAL NUT,ANSI B18.2.2 NUT,A2NA00110BOLT ASSEMBLY MACHINE; M20 X 2.5 X 75 MM,HEX HEAD,STEEL,BOLT GR10.9,NATRUAL, LIGHT OILED BOLT,20 MM DIA,75 MM LG,2.5 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,46 MM THD LG,ISO 4014BOLT,THICK HEX NUT,1 NUT (S),NUT GR 10,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,THREADNA00111BOLT ASSEMBLY MACHINE; M12 X 1.75 X 60 MM,HEX HEAD,BRASS,ISO8839 CUZN37 OR EQUAL BOLT,NATURAL BOLT,12 MM DIA,60 MM LG,1.75MM PITCH THD,ISO METRIC COARSE-6G/6H THD SER,60 MM THD LG,ISO4017 BOLT,THICK HEX NUT,1 NUT (S),ISO 8839 CUZN37 OR EQUALNUT,NATURAL NUT,ISO 4033 NUT,WITH 1 NUT AND 2 FLAT WASHERS,COURSE THREAD, MATERIAL UNS C27000 W/ HARDNESS 55-80 HRF ALSOACCEPTABLENA00112BOLT ASSEMBLY MACHINE; M14 X 2 X 60 MM,HEX HEAD,BRASS,ISO 8839CUZN37 OR EQUAL BOLT,NATURAL BOLT,14 MM DIA,60 MM LG,2 MM PITCHTHD,ISO METRIC COARSE- 6G/6H THD SER,60 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),ISO 8839 CUZN37 OR EQUALNUT,NATURAL NUT,ISO 4033 NUT,WITH 1 NUT AND 2 FLAT WASHERS,COURSE THREAD, MATERIAL UNS C27000 W/ HARDNESS 55-80 HRF ALSOACCEPTABLENA00113BOLT ASSEMBLY MACHINE; M16 X 2 X 60 MM,HEX HEAD,BRASS,ISO 8839CUZN37 OR EQUAL BOLT,NATURAL BOLT,16 MM DIA,60 MM LG,2 MM PITCH THD,ISO METRIC COARSE - 6G/6H THD SER,60 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),ISO 8839 CUZN37 OR EQUALNUT,NATURAL NUT,ISO 4033 NUT,WITH 1 NUT AND 2 FLAT WASHERS,COURSE THREAD, MATERIAL UNS C27000 W/ HARDNESS 55-80 HRF ALSOACCEPTABLENA00114BOLT ASSEMBLY MACHINE; M16 X 2 X 80 MM,HEX HEAD,BRASS,ISO 8839CUZN37 OR EQUAL BOLT,NATURAL BOLT,16 MM DIA,80 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,80 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),ISO 8839 CUZN37 OR EQUALNUT,NATURAL NUT,ISO 4033 NUT,WITH 1 NUT AND 2 FLAT WASHERS,COURSE THREAD, MATERIAL UNS C27000 W/ HARDNESS 55-80 HRF ALSOACCEPTABLENA00115BOLT ASSEMBLY MACHINE; M16 X 2 X 100 MM,HEX HEAD,BRASS,ISO 8839CUZN37 OR EQUAL BOLT,NATURAL BOLT,16 MM DIA,100 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,100 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),ISO 8839 CUZN37 OR EQUALNUT,NATURAL NUT,ISO 4033 NUT,WITH 1 NUT AND 2 FLAT WASHERS,COURSE THREAD, MATERIAL UNS C27000 W/ HARDNESS 55-80 HRF ALSOACCEPTABLENA00116BOLT ASSEMBLY MACHINE; M18 X 2.5 X 90 MM,HEX HEAD,BRASS,ISO 8839CUZN37 OR EQUAL BOLT,NATURAL BOLT,18 MM DIA,90 MM LG,2.5 MMPITCH THD,ISO METRIC COARSE - 6G/6H THD SER,90 MM THD LG,ISO4017 BOLT,THICK HEX NUT,1 NUT (S),ISO 8839 CUZN37 OR EQUALNUT,NATURAL NUT,ISO 4033 NUT,WITH 1 NUT AND 2 FLAT WASHERS,COURSE THREAD, MATERIAL UNS C27000 W/ HARDNESS 55-80 HRF ALSOACCEPTABLENA00117BOLT ASSEMBLY MACHINE; M18 X 2.5 X 100 MM,HEX HEAD,BRASS,ISO8839 CUZN37 OR EQUAL BOLT,NATURAL BOLT,18 MM DIA,100 MM LG,2.5MM PITCH THD,ISO METRIC COARSE - 6G/6H THD SER,100 MM THD LG,ISO4017 BOLT,THICK HEX NUT,1 NUT (S),ISO 8839 CUZN37 OR EQUALNUT,NATURAL NUT,ISO 4033 NUT,WITH 1 NUT AND 2 FLAT WASHERS,COURSE THREAD, MATERIAL UNS C27000 W/ HARDNESS 55-80 HRF ALSOACCEPTABLENA00118BOLT ASSEMBLY MACHINE; 1/2-13 X 2-1/2 IN,HEX HEAD,BRASS,ASTMF468 UNS C27000 OR EQUAL BOLT,BOLT GR UNS C27000 OREQUAL,NATURAL BOLT,1/2 IN DIA,63.5 MM (2-1/2 IN) LG,13 TPITHD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI/ASMEB18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F467 UNS C27000 OREQUAL NUT,NUT GR UNS C27000 OR EQUAL,NATURAL NUT,ANSI/ASMEB18.2.2 NUT,WITH 1 NUT AND 1 FLAT WASHERNA00119BOLT ASSEMBLY MACHINE; 1/2-13 X 1 IN,HEX HEAD,BRASS,ASTM F468UNS C27000 OR EQUAL BOLT,NATURAL BOLT,1/2 IN DIA,25.4 MM (1 IN)LG,13 TPI THD,UNC-2A/2B THD SER,ANSI/ASME B18.2.1 BOLT,HEAY HEXNUT,1 NUT (S),ASTM F467 UNS C27000 OR EQUAL NUT,NATURALNUT,ANSI/ASME B18.2.2 NUT,ANSI/ASME B1.1,WITH 1 NUT AND 2 FLATWASHERSNA00120BOLT ASSEMBLY MACHINE; M10 X 1.5 X 60 MM,HEX HEAD,BRASS,ISO 8839CUZN37 OR EQUAL BOLT,NATURAL BOLT,10 MM DIA,60 MM LG,1.5 MMPITCH THD,ISO METRIC COARSE - 6G/6H THD SER,60 MM THD LG,ISO4017 BOLT,HEX NUT,1 NUT (S),ISO 8839 CUZN37 OR EQUAL NUT,NATURALNUT,ISO 4032 NUT,WITH 1 NUT AND 2 FLAT WASHERS, NPT FULL THREAD,MATERIAL UNS C27000 W/ HARDNESS 55-80 HRF ALSO ACCEPTABLENA00121BOLT ASSEMBLY MACHINE; M12 X 1.75 X 80 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,12 MM DIA,80 MM LG,1.75 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,80 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 9,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00122BOLT ASSEMBLY MACHINE; M12 X 1.75 X 100 MM,HEX HEAD,STEEL,BOLTGR 8.8,NATURAL, LIGHT OILED BOLT,12 MM DIA,100 MM LG,1.75 MMTHD,ISO METRIC COARSE - 6G/6H THD SER,100 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00123BOLT ASSEMBLY MACHINE; M14 X 2 X 25 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,14 MM DIA,25 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,25 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00124BOLT ASSEMBLY MACHINE; M14 X 2 X 30 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,14 MM DIA,30 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,30 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00125BOLT ASSEMBLY MACHINE; M14 X 2 X 40 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,14 MM DIA,40 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,40 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00126BOLT ASSEMBLY MACHINE; M14 X 2 X 50 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,14 MM DIA,50 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,50 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00127BOLT ASSEMBLY MACHINE; M14 X 2 X 60 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,14 MM DIA,60 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,60 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 9,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00128BOLT ASSEMBLY MACHINE; M14 X 2 X 80 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,14 MM DIA,80 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,80 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00129BOLT ASSEMBLY MACHINE; M14 X 2 X 100 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,14 MM DIA,100 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,100 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00130BOLT ASSEMBLY MACHINE; M16 X 2 X 25 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,16 MM DIA,25 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,25 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00131BOLT ASSEMBLY MACHINE; M16 X 2 X 30 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,16 MM DIA,30 MM LG,2 MM PITCHTHD,ISO METRIC COARSE THD SER,30 MM THD LG,ISO 4017 BOLT,THICKHEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILED NUT,ISO 4033NUT,WITH NUT AND PLAIN WASHER, FULLY THREADEDNA00132BOLT ASSEMBLY MACHINE; M16 X 2 X 60 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,16 MM DIA,60 MM LG,2 MM THD,ISOMETRIC COARSE - 6G/6H THD SER,60 MM THD LG,ISO 4017 BOLT,THICKHEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILED NUT,ISO 4033NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN 933NA00133BOLT ASSEMBLY MACHINE; M16 X 2 X 80 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,16 MM DIA,80 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,80 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00134BOLT ASSEMBLY MACHINE; M16 X 2 X 100 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,16 MM DIA,100 MM LG,2 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,100 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 9,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00135BOLT ASSEMBLY MACHINE; M18 X 2.5 X 40 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,18 MM DIA,40 MM LG,2.5 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,40 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00136BOLT ASSEMBLY MACHINE; M18 X 2.5 X 60 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,18 MM DIA,60 MM LG,2.5 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,60 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00137BOLT ASSEMBLY MACHINE; M18 X 2.5 X 100 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,18 MM DIA,100 MM LG,2.5 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,100 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN933NA00138BOLT ASSEMBLY MACHINE; M5 X 0.8 X 50 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,5 MM DIA,50 MM LG,0.8 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,50 MM THD LG,ISO 4017BOLT,HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILED NUT,WITHNUT AND PLAIN WASHER, FULLY THREADED, DIN 933NA00139BOLT ASSEMBLY MACHINE; 3/16-24 X 1-3/16 IN,HEX HEAD,STEEL,FULLTHD BODY,BOLT GR SAE GR 5 OR METRIC GR 8.8,BLACK BOLT,3/16 INDIA,30.16 MM (1-3/16) LG,24 TPI THD,UNC THD SER,30 MM THDLG,HEAVY HEX NUT,1 NUT (S),BLACK NUT,WITH NUT AND PLAIN WASHER,NA00140BOLT ASSEMBLY MACHINE; M16 X 65 MM,HEX HEAD,STEEL,ASTM A307BOLT,BOLT GR B,16 MM DIA,65 MM LG,METRIC THD SER,HEAVY HEX NUT,2NUT (S),WITH NUTS SCREWED ONNA00142BOLT MACHINE; 3/4-10 X 3 IN,HEX HEAD,ALLOY STEEL,ASTM A193,GRB7,PHOSPHATED & OILED,3/4 IN DIA,76.2 MM (3 IN) LG,10 THD,UNC-2ATHD SER,FULL THD LG,ANSI/ASME B18.2.1NA00143BOLT ASSEMBLY MACHINE; 7/16-14 X 25 MM (1 IN),HEX HEAD,18CHROME-8 NICKEL ALLOY STEEL,FULL BODY,BOLT GR AISI 304, B, CL2,PLAIN BOLT,7/16 IN DIA,25 MM (1 IN) LG,14 TPI THD,UNC THDSER,22 MM (0.850 IN) THD LG,ANSI B18.2.1 BOLT,HEX NUT,1 NUT(S),NATURAL NUT,ANSI B18.2.2 NUTNA00144BOLT ASSEMBLY MACHINE; 1-1/2 - 8 X 100 MM (4 IN),HEX HEAD,18CHROME-8 NICKEL ALLOY STEEL,FULL BODY,BOLT GR AISI 304, B, CL2,PLAIN BOLT,1-1/2 IN DIA,100 MM (4 IN) LG,8 TPI THD,UNC THDSER,87 MM THD LG,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),PAINTCOATED NUT,ANSI B 18.2.2 NUTNA00146BOLT ASSEMBLY MACHINE; M20 X 2.5 MM X 45 MM,HEX HEAD,ALLOYSTEEL,ASTM A193M BOLT,BOLT GR B8C,NATURAL BOLT,20 MM DIA,45 MMLG,2.5 MM PITCH THD,METRIC COARSE 6H/6G PER ISO 965 OR ANSIB1.13M THD SER,FULL THD LG,ISO 4017 OR ANSI/ASME B18.2.3.5MBOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194M NUT,NUT GR 8C,NATURALNUT,ANSI/ASME B18.2.4.6M NUT,WITH ONE WASHERNA00147BOLT MACHINE; M16 X 2 X 145 MM,HEX HEAD,SS,ASTM A182,GR TYPE316L,16 MM DIA,145 MM LG,2 MM PITCH THD,METRIC COARSE THDSER,FULL THD LG,WITHOUT NUT, FOR FILTRATION UNIT SWI SYSTEMNA00148BOLT MACHINE; M8 X 1.25 X 25 MM,HEX HEAD,SS,ASTM A182,GR A4.70,8 MM DIA,25 MM LG,1.25 MM PITCH THD,METRIC COARSE THDSER,FULL THD LG,ISO 4017,FOR FILTRATION UNIT SWI SYSTEMNA00149BOLT MACHINE; M12 X 1.75 X 35 MM,HEX HEAD,FULL THD BODY,SS,ASTMA182,GR A 4.70,NATURAL,12 MM DIA,35 MM LG,1.75 MM PITCHTHD,METRIC COARSE THD SER,35 MM THD LG,ANSI B18.2.1,WITHOUT NUT,FOR FILTRATION UNIT SWI SYSTEMNA00150BOLT MACHINE; M10 X 1.5 X 25 MM,HEX HEAD,SS,ASTM A182,GR TYPE304,10 MM DIA,25 MM LG,1.5 MM PITCH THD,ISO METRIC COARSE-6G THDSER,FULL THD LG,ISO 4017,FOR FILTRATION UNIT SWI SYSTEMNA00151BOLT MACHINE; M10 X 1.5 X 30 MM,HEX HEAD,SS,ASTM A182,GR TYPE316,10 MM DIA,30 MM LG,1.5 MM PITCH THD,ISO METRIC COARSE-6G THDSER,FULL THD LG,ISO 4017,FOR FILTRATION UNIT SWI SYSTEMNA00152BOLT MACHINE; M12 X 1.75 X 40,HEX HEAD,SS,ASTM A182,GR TYPE304,12 MM DIA,40 MM LG,1.75 MM PITCH THD,METRIC COARSE THDSER,FULL THD LG,FOR FILTRATION UNIT SYSTEMNA00153BOLT MACHINE; M10 X 1.5 X 79 MM,HEX HEAD,SS,ASTM A182,GR TYPE316L,10 MM DIA,79 MM LG,1.5 MM PITCH THD,ISO METRIC COARSE-6GTHD SER,FULL THD LG,ISO 4017,FOR FILTRATION UNIT SWI SYSTEMNA00154BOLT MACHINE; M12 X 1.75 X 24 MM,HEX HEAD,SS,ASTM A182,GR TYPE316L,12 MM DIA,24 MM LG,1.75 MM PITCH THD,METRIC COARSE THDSER,FULL THD LG,FOR FILTRATION UNIT SWI SYSTEMNA00156BOLT ASSEMBLY U; ROUND BEND SHAPE,M6 X 1 X 50 MM,SS,AISI 316L,GR316L,50.8 MM (1-1/2 IN) PIPE NPS,6 MM DIA,1 MM PITCH THD,ISOCOARSE THD SER,61 MM (2.401 IN) INSIDE W,83 MM (2.267 IN) INSIDEL,HEAVY HEX NUT,4 NUT (S),AISI 316L (UNI 5588) NUT,NUT GR316L,COMPLETE WITH 4 NUTS AND 2 WASHERS, AISI 316L, PACKING SPECCODES: 844421NA00158BOLT ASSEMBLY U; ROUND BEND SHAPE,M10 X 1.5 X 70 MM,SS,AISI316L,GR 316L,76.2 MM (3 IN) PIPE NPS,10 MM DIA,1.5 MM PITCHTHD,ISO COARSE THD SER,102 MM (4.015 IN) INSIDE W,90 MM (3.543IN) INSIDE L,HEAVY HEX NUT,4 NUT (S),AISI 316L (UNI 5588)NUT,NUT GR 316L,PACKING SPEC CODES: 844421NA00160BOLT EYE; 5/8 - 11,STAINLESS STEEL,GR AISI 316,5/8 IN DIA,17/32IN ID EYE,11 THD,UNC-2A THD SER,1-5/8 IN THD LG,1-3/8 IN SHANKLG,3/8 IN CROSS EYNA00162BOLT ASSEMBLY MACHINE; M10 X 1.5 X 30 MM,HEX HEAD,SS,FULLBODY,AISI 304 BOLT,BOLT GR 304,10 MM DIA,30 MM LG,1.5 MM PITCHTHD,ISO COARSE THD SER,30 MM THD LG,HEAVY HEX NUT,AISI 304NUT,NUT GR 304,FOR PILOT SUPPORT WITH NUTSNA00163BOLT ASSEMBLY U; ROUND BEND SHAPE,M8 X 1.25 X 50 MM,SS,AISI310,GR 310,50.8 MM (2 IN) NPS,8 MM DIA,1.25 MM PITCH THD,ISOCOARSE THD SER,70 MM (2.756 IN) INSIDE W,65 MM (2.560 IN) INSIDEL,HEAVY HEX NUT,4 NUT (S),AISI 310 NUT,NUT GR 310,60 MM WD X 120MM LG X 6 MM THK PLATE,INCOLOY 800 H PLATE,PACKING SPEC CODES:844421NA00164BOLT ASSEMBLY U; ROUND BEND SHAPE,M6 X 1 X 50 MM,SS,AISI 316,GR316,38.1 MM (1-1/2 IN) PIPE NPS,6 MM DIA,1 MM PITCH THD,ISOCOARSE THD SER,58 MM (2.283 IN) INSIDE W,55 MM (2.165 IN) INSIDEL,HEAVY HEX NUT,4 NUT (S),AISI 316 NUT,NUT GR 316,50 MM WD X64.2 MM LG X 6 MM THK PLATE,INCOLOY 800 H PLATE,PACKING SPECCODE: 844421 APPLIESNA00167BOLT ASSEMBLY STOVE; 1/4-20 X 1/2 IN,SLOTTED ROUND HEAD,CS,1 NUT(S),SQUARE NUT,6.4 MM (1/4 IN) DIA,12.7 MM (1/2 IN) LG,20THD,UNC-2A/2B THD SER,12.7 MM (1/2 IN) THD LG,GALV BOLT,ASTMA307 BOLT,ANSI B1.1, ANSI B18.6.3 BOLT,BOLT GR B,GALV NUT,ANSIB1.1 NUT,NUT GR A,ASTM A563 NUT,ANSI B1.1, ANSI B18.6.3,NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00168BOLT ASSEMBLY STOVE; 1/4-20 X 1-1/4 IN,SLOTTED ROUND HEAD,CS,1NUT (S),SQUARE NUT,6.4 MM (1/4 IN) DIA,31.8 MM (1-1/4 IN) LG,20THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THD LG,GALV BOLT,ASTMA307 BOLT,ANSI B1.1, ANSI B18.6.3 BOLT,BOLT GR B,GALV NUT,ANSIB1.1, ANSI B18.6.3 NUT,NUT GR A,ASTM A563 NUT,ANSI B1.1, ANSIB18.6.3,NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00169BOLT ASSEMBLY CARRIAGE; 1/4-20 X 2 IN,BRASS,ASTM F468 BOLT,BOLTGR UNS C27000,NATURAL BOLT,6.4 MM (1/4 IN) DIA,50.8 MM (2 IN)LG,20 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B1.1, ANSI B18.5BOLT,HEX NUT,1 NUT (S),ASTM F467 NUT,NUT GR UNS C27000,NATURALNUT,ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARENECK, ROUND HEAD, FULL DIAMETER BODY, WITH 1 NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00170BOLT ASSEMBLY CARRIAGE; 1/4-20 X 3 IN,BRASS,ASTM F468 BOLT,BOLTGR UNS C27000,NATURAL BOLT,6.4 MM (1/4 IN) DIA,76.2 MM (3 IN)LG,20 THD,UNC-2A/2B THD SER,19.1 MM (3/4 IN) THD LG,ANSI B1.1,ANSI B18.2.2 BOLT,HEX NUT,1 NUT (S),ASTM F467 NUT,NUT GR UNSC27000,NATURAL NUT,ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.2,ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY, WITH 1 NUT SCREWEDON, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00171BOLT ASSEMBLY CARRIAGE; 1/4-20 X 4 IN,BRASS,ASTM F468 BOLT,BOLTGR UNS C27000,NATURAL BOLT,6.4 MM (1/4 IN) DIA,101.6 MM (4 IN)LG,20 THD,UNC-2A/2B THD SER,22.2 MM (7/8 IN) THD LG,ANSI B1.1,ANSI B18.2.2 BOLT,HEX NUT,1 NUT (S),ASTM F467 NUT,NUT GR UNSC27000,NATURAL NUT,ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.2,ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY, WITH 1 NUT SCREWEDON, PACKING SPEC 8444-21 APPLIESNA00172BOLT ASSEMBLY CARRIAGE; 3/8-16 X 5 IN,BRASS,ASTM F468 BOLT,BOLTGR UNS C27000,NATURAL BOLT,9.5 MM (3/8 IN) DIA,127.0 MM (5 IN)LG,16 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI B1.1,ANSI B18.2.2 BOLT,HEX NUT,1 NUT (S),ASTM F467 NUT,NUT GR UNSC27000,NATURAL NUT,ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.2,ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY, WITH 1 NUT SCREWEDON, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00173BOLT ASSEMBLY MACHINE; 3/8-16 X 7 IN,ROUND HEAD,BRASS,FULLBODY,ASTM F468 BOLT,BOLT GR UNC C27000,NATURAL BOLT,9.5 MM (3/8IN) DIA,177.8 MM (7 IN) LG,16 THD,UNC-2A/2B THD SER,28.6 MM(1-1/8 IN) THD LG,ANSI B18.5 BOLT,HEX NUT,1 NUT (S),ASTM F467NUT,NUT GR UNC C27000,NATURAL NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,WITH NUT SCREWED ON,SQUARE NECK, PACKING SPEC 8444-21 APPLIESNA00174BOLT ASSEMBLY CARRIAGE; M6 X 1 X 50 MM,BRASS,ASTM F468MBOLT,BOLT GR UNS C27000,NATURAL BOLT,6 MM DIA,50.8 MM (2 IN)LG,1 MM PITCH THD,METRIC COARSE 6H/6G THD SER,19.1 MM (3/4 IN)THD LG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM F467M NUT,NUTGR UNS C27000,NATURAL NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSIB18.2.4.1M, ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ONMETRIC COARSE THREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00175BOLT ASSEMBLY CARRIAGE; M6 X 1 X 75 MM,BRASS,ASTM F468MBOLT,BOLT GR UNS C27000,NATURAL BOLT,6 MM DIA,76.2 MM (3 IN)LG,1 MM PITCH THD,METRIC COARSE THD SER,19.1 MM (3/4 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM F467M NUT,NUT GRUNS C27000,NATURAL NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSIB18.2.4.1M, ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ONMETRIC COARSE THREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00176BOLT ASSEMBLY CARRIAGE; M6 X 1 X 100 MM,BRASS,ASTM F468MBOLT,BOLT GR UNS C27000,NATURAL BOLT,6 MM DIA,100 MM LG,1 MMPITCH THD,METRIC COARSE THD SER,19.1 MM (3/4 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM F467M NUT,NUT GR UNSC27000,NATURAL NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSIB18.2.4.1M, ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ONMETRIC COARSE THREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00177BOLT ASSEMBLY CARRIAGE; M10 X 1.5 X 130 MM,BRASS,ASTM F468MBOLT,BOLT GR UNS C27000,NATURAL BOLT,10 MM DIA,130 MM LG,1.5 MMPITCH THD,METRIC COARSE THD SER,28.6 MM (1-1/8 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM F467M NUT,NUT GR UNSC27000,NATURAL NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSIB18.2.4.1M, ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ONMETRIC COARSE THREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00178BOLT ASSEMBLY CARRIAGE; M10 X 1.5 X 180 MM,BRASS,ASTM F468MBOLT,BOLT GR UNS C27000,NATURAL BOLT,10 MM DIA,180 MM LG,1.5 MMPITCH THD,METRIC COARSE THD SER,31.8 MM (1-1/4 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM F467M NUT,NUT GR UNSC27000,NATURAL NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSIB18.2.4.1M, ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ONMETRIC COARSE THREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00179BOLT ASSEMBLY CARRIAGE; 1/4-20 X 1 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,6.4 MM (1/4 IN) DIA,25.4 MM (1 IN) LG,20THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARE NUT,1NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULLDIAMETER BODY, WITH 1 NUT SCREWED ON, ROUND HEAD, PACKING SPEC8444-21 APPLIESNA00180BOLT ASSEMBLY CARRIAGE; 1/4-20 X 1-1/2 IN,STEEL,ASTM A307BOLT,BOLT GR A,GALV BOLT,6.4 MM (1/4 IN) DIA,38.1 MM (1-1/2 IN)LG,20 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARENUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULLDIAMETER BODY, WITH 1 NUT SCREWED ON, PACKING SPEC 8444-21APPLIESNA00181BOLT ASSEMBLY CARRIAGE; 1/4-20 X 2 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,6.4 MM (1/4 IN) DIA,50.8 MM (2 IN) LG,20THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARE NUT,1NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY,WITH 1 NUT SCREWED ON, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00182BOLT ASSEMBLY CARRIAGE; 1/4-20 X 2-1/2 IN,STEEL,ASTM A307BOLT,BOLT GR A,GALV BOLT,6.4 MM (1/4 IN) DIA,63.5 MM (2-1/2 IN)LG,20 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B1.1, ANSI B18.2.1BOLT,SQUARE NUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK,FULL DIAMETER BODY, WITH 1 NUT SCREWED ON, ROUND HEAD, PACKINGSPEC 8444-21 APPLIESNA00183BOLT ASSEMBLY CARRIAGE; 1/4-20 X 3 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,6.4 MM (1/4 IN) DIA,76.2 MM (3 IN) LG,20THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B1.1, ANSI B18.2.2BOLT,SQUARE NUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK,FULL DIAMETER BODY, WITH 1 NUT SCREWED ON, PACKING SPEC 8444-21APPLIESNA00184BOLT ASSEMBLY CARRIAGE; 1/4-20 X 3-1/2 IN,STEEL,ASTM A307BOLT,BOLT GR A,GALV BOLT,6.4 MM (1/4 IN) DIA,88.9 MM (3-1/2 IN)LG,20 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI B1.1BOLT,SQUARE NUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK,FULL DIAMETER BODY, WITH 1 NUT SCREWED ON, ROUND HEAD, PACKINGSPEC 8444-21 APPLIESNA00185BOLT ASSEMBLY CARRIAGE; 1/4-20 X 4 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,6.4 MM (1/4 IN) DIA,101.6 MM (4 IN) LG,20THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARE NUT,1NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY,WITH 1 NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00186BOLT ASSEMBLY CARRIAGE; 1/4-20 X 4-1/2 IN,STEEL,ASTM A307BOLT,BOLT GR A,GALV BOLT,6.4 MM (1/4 IN) DIA,114.3 MM (4-1/2 IN)LG,20 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARENUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULLDIAMETER BODY, WITH 1 NUT SCREWED ON, ROUND HEAD, PACKING SPEC8444-21 APPLIESNA00187BOLT ASSEMBLY CARRIAGE; 1/4-20 X 5 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,6.4 MM (1/4 IN) DIA,127.0 MM (5 IN) LG,20THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARE NUT,1NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY,WITH 1 NUT SCREWED ON, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00188BOLT ASSEMBLY CARRIAGE; 1/4-20 X 6 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,6.4 MM (1/4 IN) DIA,152.4 MM (6 IN) LG,20THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARE NUT,1NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY,WITH 1 NUT SCREWED ON, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00189BOLT ASSEMBLY CARRIAGE; 5/16-18 X 1-1/2 IN,STEEL,ASTM A307BOLT,BOLT GR A,GALV BOLT,7.9 MM (5/16 IN) DIA,38.1 MM (1-1/2 IN)LG,18 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARENUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULLDIAMETER BODY, WITH 1 NUT SCREWED ON, PACKING SPEC 8444-21APPLIESNA00190BOLT ASSEMBLY CARRIAGE; 5/16-18 X 2 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,7.9 MM (5/16 IN) DIA,50.8 MM (2 IN) LG,18THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARE NUT,1NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY,WITH 1 NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00191BOLT ASSEMBLY CARRIAGE; 5/16-18 X 2-1/2 IN,STEEL,ASTM A307BOLT,BOLT GR A,GALV BOLT,7.9 MM (5/16 IN) DIA,63.5 MM (2-1/2 IN)LG,18 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARENUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULLDIAMETER BODY, WITH 1 NUT SCREWED ON, ROUND HEAD, PACKING SPEC8444-21 APPLIESNA00192BOLT ASSEMBLY CARRIAGE; 5/16-18 X 3 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,7.9 MM (5/16 IN) DIA,76.2 MM (3 IN) LG,18THD,UNC-2A/2B THD SER,25.4 MM (1 IN) THD LG,ANSI B18.5BOLT,SQUARE NUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK,FULL DIAMETER BODY, WITH 1 NUT SCREWED ON, ROUND HEAD, PACKINGSPEC 8444-21 APPLIESNA00193BOLT ASSEMBLY CARRIAGE; 5/16-18 X 3-1/2 IN,STEEL,ASTM A307BOLT,BOLT GR A,GALV BOLT,7.9 MM (5/16 IN) DIA,88.9 MM (3-1/2 IN)LG,18 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARENUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULLDIAMETER BODY, WITH 1 NUT SCREWED ON, PACKING SPEC 8444-21APPLIESNA00194BOLT ASSEMBLY CARRIAGE; 5/16-18 X 4 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,7.9 MM (5/16 IN) DIA,101.6 MM (4 IN) LG,18THD,UNC-2A/2B THD SER,ANSI B18.5 BOLT,SQUARE NUT,1 NUT (S),ASTMA563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2 NUT,ANSI B1.1, ANSIB18.2.2, ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY, WITH 1 NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00195BOLT ASSEMBLY CARRIAGE; 5/16-18 X 5 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,7.9 MM (5/16 IN) DIA,127.0 MM (5 IN) LG,18THD,UNC-2A/2B THD SER,ANSI B18.5 BOLT,SQUARE NUT,1 NUT (S),ASTMA563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2 NUT,ANSI B1.1, ANSIB18.2.2, ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY, WITH 1 NUTSCREWED ON, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00196BOLT ASSEMBLY CARRIAGE; 5/16-18 X 6 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,7.9 MM (5/16 IN) DIA,152.4 MM (6 IN) LG,18THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARE NUT,1NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY,WITH 1 NUT SCREWED ON, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00197BOLT ASSEMBLY CARRIAGE; 3/8-16 X 1-1/4 IN,STEEL,ASTM A307BOLT,BOLT GR A,GALV BOLT,9.5 MM (3/8 IN) DIA,31.8 MM (1-1/4 IN)LG,16 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARENUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULLDIAMETER BODY, WITH 1 NUT SCREWED ON, PACKING SPEC 8444-21APPLIESNA00198BOLT ASSEMBLY CARRIAGE; 3/8-16 X 2-1/2 IN,STEEL,ASTM A307BOLT,BOLT GR A,GALV BOLT,9.5 MM (3/8 IN) DIA,63.5 MM (2-1/2 IN)LG,16 THD,UNC-2A/2B THD SER,28.6 MM (1-1/8 IN) THD LG,ANSI B18.5BOLT,SQUARE NUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK,FULL DIAMETER BODY, WITH 1 NUT SCREWED ON, PACKING SPEC 8444-21APPLIESNA00199BOLT ASSEMBLY CARRIAGE; 3/8-16 X 4 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,9.5 MM (3/8 IN) DIA,101.6 MM (4 IN) LG,16THD,UNC-2A/2B THD SER,25.4 MM (1 IN) THD LG,ANSI B18.5BOLT,SQUARE NUT,1 NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK,FULL DIAMETER BODY, WITH 1 NUT SCREWED ON, ROUND HEAD, PACKINGSPEC 8444-21 APPLIESNA00200BOLT ASSEMBLY CARRIAGE; 1/2-13 X 2 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,12.7 MM (1/2 IN) DIA,50.8 MM (2 IN) LG,13THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARE NUT,1NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY,WITH 1 NUT SCREWED ON, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00201BOLT ASSEMBLY CARRIAGE; 1/2-13 X 4 IN,STEEL,ASTM A307 BOLT,BOLTGR A,GALV BOLT,12.7 MM (1/2 IN) DIA,101.6 MM (4 IN) LG,13THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B18.5 BOLT,SQUARE NUT,1NUT (S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.2, ANSI B18.5,SQUARE NECK, FULL DIAMETER BODY,WITH 1 NUT SCREWED ON, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00202BOLT ASSEMBLY CARRIAGE; M6 X 1 X 25 MM,STEEL,ASTM A307 BOLT,BOLTGR 4.6,GALV BOLT,6 MM DIA,25.4 MM (1 IN) LG,1 MM PITCHTHD,METRIC COARSE THD SER,FULL THD LG,ANSI B18.5.2.2MBOLT,SQUARE NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALV NUT,ANSIB18.2.4.1M NUT,ANSI B1.13M, ANSI B18.5.2.2M, ANSIB18.2.4M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSE THREADS,ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00203BOLT ASSEMBLY CARRIAGE; M6 X 1 X 40 MM,STEEL,ASTM A307 BOLT,BOLTGR 4.6 OR 4.8,GALV BOLT,6 MM DIA,40 MM LG,1 MM PITCH THD,METRICCOARSE THD SER,19.1 MM (3/4 IN) THD LG,ANSI B18.5.2.2MBOLT,SQUARE NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALV NUT,ANSIB18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M, ANSIB18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00204BOLT ASSEMBLY CARRIAGE; M6 X 1 X 50 MM,STEEL,ASTM A307 BOLT,BOLTGR 4.6 OR 4.8,GALV BOLT,6 MM DIA,50.8 MM (2 IN) LG,1 MM PITCHTHD,METRIC COARSE THD SER,19.1 MM (3/4 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALVNUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M, ANSIB18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00205BOLT ASSEMBLY CARRIAGE; M6 X 1 X 65 MM,STEEL,ASTM A307 BOLT,BOLTGR 4.6 OR 4.8,GALV BOLT,6 MM DIA,63.5 MM (2-1/2 IN) LG,1 MMPITCH THD,METRIC COARSE 6H/6G THD SER,19.1 MM (3/4 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00206BOLT ASSEMBLY CARRIAGE; M6 X 1 X 75 MM,STEEL,ASTM A307 BOLT,BOLTGR 4.6 OR 4.8,GALV BOLT,6 MM DIA,76.2 MM (3 IN) LG,1 MM PITCHTHD,METRIC COARSE 6H/6G THD SER,19.1 MM (3/4 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALVNUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M, ANSIB18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00207BOLT ASSEMBLY CARRIAGE; M6 X 1 X 90 MM,STEEL,ASTM A307 BOLT,BOLTGR 4.6 OR 4.8,GALV BOLT,6 MM DIA,90 MM LG,1 MM PITCH THD,METRICCOARSE 6H/6G THD SER,19.1 MM (3/4 IN) THD LG,ANSI B18.5.2.2MBOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALV NUT,ANSIB18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M, ANSIB18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00208BOLT ASSEMBLY CARRIAGE; M6 X 1 X 100 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,6 MM DIA,100 MM LG,1 MM PITCHTHD,METRIC COARSE 6H/6G THD SER,19.1 MM (3/4 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALVNUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M, ANSIB18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00209BOLT ASSEMBLY CARRIAGE; M6 X 1 X 110 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,6 MM DIA,110 MM LG,1 MM PITCHTHD,METRIC COARSE 6H/6G THD SER,19.1 MM (3/4 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALVNUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M, ANSIB18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00210BOLT ASSEMBLY CARRIAGE; M6 X 1 X 130 MM,STEEL,ASTM A307, ASTMF568 BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,6 MM DIA,130 MM LG,1 MMPITCH THD,METRIC COARSE 6H/6G THD SER,19.1 MM (3/4 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00211BOLT ASSEMBLY CARRIAGE; M6 X 1 X 150 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,6 MM DIA,150 MM LG,1 MM PITCHTHD,METRIC COARSE 6H/6G THD SER,22.2 MM (7/8 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALVNUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M, ANSIB18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00212BOLT ASSEMBLY CARRIAGE; M8 X 1.25 X 40 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8 PER ASTM F568,GALV BOLT,8 MM DIA,40 MMLG,1.25 MM PITCH THD,METRIC COARSE 6H/6G THD SER,22.2 MM (7/8IN) THD LG,ANSI/ASME B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTMA563M NUT,NUT GR 5,GALV NUT,ANSI/ASME B18.2.4.1M NUT,ANSI/ASMEB1.13M, ANSI/ASME B18.2.4.1M, ANSI/ASME B18.5.2.2M,SQUARE NECK,WITH NUT SCREWED ON METRIC COARSE THREADS, ROUND HEAD, PACKINGSPEC 8444-21 APPLIESNA00213BOLT ASSEMBLY CARRIAGE; M8 X 1.25 X 50 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,8 MM DIA,50.8 MM (2 IN)LG,1.25 MM PITCH THD,METRIC COARSE 6H/6G THD SER,22.2 MM (7/8IN) THD LG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563MNUT,NUT GR 5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSIB18.2.4.1M, ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ONMETRIC COARSE THREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00214BOLT ASSEMBLY CARRIAGE; M8 X 1.25 X 65 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,8 MM DIA,63.5 MM (2-1/2 IN)LG,1.25 MM PITCH THD,METRIC COARSE 6H/6G THD SER,22.2 MM (7/8IN) THD LG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563MNUT,NUT GR 5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSIB18.2.4.1M, ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ONMETRIC COARSE THREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00215BOLT ASSEMBLY CARRIAGE; M8 X 1.25 X 75 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,8 MM DIA,76.2 MM (3 IN)LG,1.25 MM PITCH THD,METRIC COARSE 6H/6G THD SER,22.2 MM (7/8IN) THD LG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563MNUT,NUT GR 5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSIB18.2.4.1M, ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ONMETRIC COARSE THREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00216BOLT ASSEMBLY CARRIAGE; M8 X 1.25 X 90 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,8 MM DIA,90 MM LG,1.25 MMPITCH THD,METRIC COARSE 6H/6G THD SER,22.2 MM (7/8 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00217BOLT ASSEMBLY CARRIAGE; M8 X 1.25 X 100 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,8 MM DIA,100 MM LG,1.25 MMPITCH THD,METRIC COARSE 6H/6G THD SER,22.2 MM (7/8 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00218BOLT ASSEMBLY CARRIAGE; M8 X 1.25 X 130 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,8 MM DIA,130 MM LG,1.25 MMPITCH THD,METRIC COARSE 6H/6G THD SER,22.2 MM (7/8 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00219BOLT ASSEMBLY CARRIAGE; M8 X 1.25 X 150 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,8 MM DIA,150 MM LG,1.25 MMPITCH THD,METRIC COARSE 6H/6G THD SER,25.4 MM (1 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALVNUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M, ANSIB18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00220BOLT ASSEMBLY CARRIAGE; M10 X 1.50 X 30 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,10 MM DIA,30 MM LG,1.5 MMPITCH THD,METRIC COARSE 6H/6G THD SER,25.4 MM (1 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALVNUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M, ANSIB18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00221BOLT ASSEMBLY CARRIAGE; M10 X 1.50 X 40 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,10 MM DIA,40 MM LG,1.5 MMPITCH THD,METRIC COARSE 6H/6G THD SER,25.4 MM (1 IN) THD LG,ANSIB18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR 5,GALVNUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M, ANSIB18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00222BOLT ASSEMBLY CARRIAGE; M10 X 1.50 X 65 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,10 MM DIA,63.5 MM (2-1/2 IN)LG,1.5 MM PITCH THD,METRIC COARSE 6H/6G THD SER,25.4 MM (1 IN)THD LG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUTGR 5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00223BOLT ASSEMBLY CARRIAGE; M10 X 1.50 X 75 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,10 MM DIA,76.2 MM (3 IN)LG,1.5 MM PITCH THD,METRIC COARSE 6H/6G THD SER,25.4 MM (1 IN)THD LG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUTGR 5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, PACKING SPEC 8444-21 APPLIESNA00224BOLT ASSEMBLY CARRIAGE; M10 X 1.50 X 90 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,10 MM DIA,90 MM LG,1.5 MMPITCH THD,METRIC COARSE 6H/6G THD SER,28.6 MM (1-1/8 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00225BOLT ASSEMBLY CARRIAGE; M10 X 1.50 X 100 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,10 MM DIA,100 MM LG,1.5 MMPITCH THD,METRIC COARSE 6H/6G THD SER,28.6 MM (1-1/8 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00226BOLT ASSEMBLY CARRIAGE; M10 X 1.50 X 130 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,10 MM DIA,130 MM LG,1.5 MMPITCH THD,METRIC COARSE 6H/6G THD SER,28.6 MM (1-1/8 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00227 BOLT ASSEMBLY CARRIAGE; M10 X 1.50 X 150 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,10 MM DIA,150 MM LG,1.5 MMPITCH THD,METRIC COARSE 6H/6G THD SER,31.8 MM (1-1/4 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00228BOLT ASSEMBLY CARRIAGE; M10 X 1.50 X 200 MM,STEEL,ASTM A307BOLT,BOLT GR 4.6 OR 4.8,GALV BOLT,10 MM DIA,200 MM LG,1.5 MMPITCH THD,METRIC COARSE 6H/6G THD SER,31.8 MM (1-1/4 IN) THDLG,ANSI B18.5.2.2M BOLT,HEX NUT,1 NUT (S),ASTM A563M NUT,NUT GR5,GALV NUT,ANSI B18.2.4.1M NUT,ANSI B1.13M, ANSI B18.2.4.1M,ANSI B18.5.2.2M,SQUARE NECK, WITH NUT SCREWED ON METRIC COARSETHREADS, ROUND HEAD, PACKING SPEC 8444-21 APPLIESNA00229BOLT ASSEMBLY CARRIAGE; 3/4-10 X 6 IN,SS,ASTM A276 BOLT,BOLT GRA309S,NATURAL BOLT,19.1 MM (3/4 IN) DIA,152.4 MM (6 IN) LG,10THD,UNC-2A/2B THD SER,47.6 MM (1-7/8 IN) THD LG,ANSI B1.1, ANSIB18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 8F,NATURALNUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,FULL DIAMETER BODY, WITH NUT SCREWED ON, PACKING SPEC8444-21 APPLIESNA00230BOLT ASSEMBLY CARRIAGE; 3/8-16 X 1 IN,SS,ASTM A193 BOLT,BOLT GRB8,NATURAL BOLT,9.5 MM (3/8 IN) DIA,25.4 MM (1 IN) LG,16THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B1.1, ANSI B18.2.1BOLT,HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 8F,NATURAL NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,FULL DIAMETER BODY, WITH NUT SCREWED ON, PACKING SPEC8444-21 APPLIESNA00231BOLT ASSEMBLY MACHINE; 5/8-11 X 2 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B8 (AISI 304),NATURAL BOLT,15.9 MM (5/8 IN)DIA,50.8 MM (2 IN) LG,11 THD,UNC-2A/2B THD SER,38.1 MM (1-1/2IN) THD LG,ANSI/ASME B1.1, ANSI/ASME B18.2.1 BOLT,HEAVY HEXNUT,1 NUT (S),ASTM A194 NUT,NUT GR 8F (AISI 303),NATURALNUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI/ASME B1.1, ANSI/ASMEB18.2.1, ANSI/ASME B18.2.2,FULL DIAMETER BODY, WITH NUT SCREWEDON, PACKING SPEC 8444-21 APPLIESNA00232BOLT ASSEMBLY MACHINE; 5/8-11 X 2-1/2 IN,HEX HEAD,SS,FULLBODY,ASTM A193 BOLT,BOLT GR B8,NATURAL BOLT,15.9 MM (5/8 IN)DIA,63.5 MM (2-1/2 IN) LG,11 THD,UNC-2A/2B THD SER,38.1 MM(1-1/2 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1 NUT(S),ASTM A194 NUT,NUT GR 8F,NATURAL NUT,ANSI B1.1, ANSI B18.2.1NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,FULL DIAMETER BODY,WITH NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00233BOLT ASSEMBLY MACHINE; 5/8-11 X 3-1/4 IN,HEX HEAD,SS,FULLBODY,ASTM A193, AISI 304 BOLT,BOLT GR B8,NATURAL BOLT,15.9 MM(5/8 IN) DIA,82.6 MM (3-1/4 IN) LG,11 THD,UNC-2A/2B THD SER,38.1MM (1-1/2 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1 NUT(S),ASTM A194, AISI 303 NUT,NUT GR 8F,NATURAL NUT,ANSI B1.1,ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,FULLDIAMETER BODY, WITH NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00234BOLT ASSEMBLY MACHINE; 3/4-10 X 3-1/4 IN,HEX HEAD,SS,FULLBODY,ASTM A193, AISI 304 BOLT,BOLT GR B8,NATURAL BOLT,19.1 MM(3/4 IN) DIA,82.6 MM (3-1/4 IN) LG,10 THD,UNC-2A/2B THD SER,50.8MM (2 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1 NUT(S),ASTM A194, AISI 303 NUT,NUT GR 8F,NATURAL NUT,ANSI B1.1,ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00235BOLT ASSEMBLY MACHINE; 3/4-10 X 3-3/4 IN,HEX HEAD,SS,FULLBODY,ASTM A193 BOLT,BOLT GR B8,NATURAL BOLT,19.1 MM (3/4 IN)DIA,95.3 MM (3-3/4 IN) LG,10 THD,UNC-2A/2B THD SER,50.8 MM (2IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTMA194 NUT,NUT GR 8F,NATURAL NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00236BOLT ASSEMBLY MACHINE; 3/4-10 X 6 IN,HEX HEAD,SS,FULL BODY,ASTMA193 BOLT,BOLT GR B8,NATURAL BOLT,19.1 MM (3/4 IN) DIA,152.4 MM(6 IN) LG,10 THD,UNC-2A/2B THD SER,54.0 MM (2-1/8 IN) THDLG,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A194NUT,NUT GR 8F,NATURAL NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1,ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKING SPEC8444-21 APPLIESNA00237BOLT ASSEMBLY MACHINE; 1/4-20 X 1-1/4 IN,HEX HEAD,SS,FULLBODY,ASTM A193, AISI 316 F593G BOLT,BOLT GR B8M,NATURAL BOLT,6.4MM (1/4 IN) DIA,31.8 MM (1-1/4 IN) LG,20 THD,UNC-2A/2B THDSER,FULL THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1 NUT(S),ASTM A194, AISI 316 F593G NUT,NUT GR 8M,NATURAL NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00238BOLT ASSEMBLY MACHINE; 1/4-20 X 1-1/2 IN,HEX HEAD,SS,FULLBODY,ASTM F593 BOLT,BOLT GR TYPE 316,NATURAL BOLT,1/4 INDIA,38.1 MM (1-1/2 IN) LG,20 THD,UNC-2A/2B THD SER,19.1 MM (3/4IN) THD LG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F594NUT,NUT GR TYPE 316,NATURAL NUT,ANSI/ASME B18.2.2 NUT,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00239BOLT ASSEMBLY MACHINE; 1/4-20 X 1-3/4 IN,HEX HEAD,SS,FULLBODY,ASTM A193, AISI 316 F593G BOLT,BOLT GR B8M,NATURAL BOLT,6.4MM (1/4 IN) DIA,44.5 MM (1-3/4 IN) LG,20 THD,UNC-2A/2B THDSER,19.1 MM (3/4 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A194, AISI 316 F593G NUT,NUT GR 8M,NATURALNUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00240BOLT MACHINE; M16 X 2 X 180 MM,HEX HEAD,CS,ASTM F568, DIN 267PART 3,GR 8.8 (METHOD 1),HEAT TREATED,16 MM DIA,180 MM LG,2 MMPITCH THD,FULL THD LG,DIN 933,PACKING SPEC 8444-21 APPLIESNA00241BOLT MACHINE; M16 X 2 X 60 MM,HEX HEAD,SS,ASTM A276, DIN 267PART 3,GR AISI 420,16 MM DIA,60 MM LG,2 MM PITCH THD,50 MM THDLG,DIN 931,DIN 17440 NO 1.4021,PACKING SPEC 8444-21 APPLIESNA00242BOLT MACHINE; M16 X 2 X 80 MM,HEX HEAD,SS,ASTM A276, ASTM A420,DIN 267 PART 3,GR TYPE 420,16 MM DIA,80 MM LG,2 MM PITCH THD,41MM THD LG,DIN 931,DIN 17440 NO 1.4021,PACKING SPEC 8444-21APPLIESNA00243BOLT MACHINE; M12 X 1.75 X 45 MM,HEX HEAD,SS 304,ASTM F738,GRA150,12 MM DIA,45 MM LG,1.75 MM PITCH THD,28.6 MM THD LG,DIN931-A2,PACKING SPEC 8444-21 APPLIESNA00244BOLT MACHINE; M18 X 2.5 X 150 MM,HEXHEAD,CS,JIS-B1180,PHOSPHATED & OILED,18 MM DIA,150 MM LG,2.5 MMPITCH THD,50 MM THD LG,DIN 931,PACKING SPEC 8444-21 APPLIESNA00245BOLT MACHINE; 1/2-13 X 1 IN,HEX HEAD,STEEL,ASTM A193,GR B6 (TYPE410),1/2 IN DIA,25.4 MM (1 IN) LG,13 THD,UNC-2A THD SER,19.1 MM(3/4 IN) THD LG,ANSI/ASME B18.2.1,WITHOUT NUT, PACKING SPEC8444-21 APPLIESNA00246BOLT MACHINE; 1/2-13 X 1-1/2 IN,HEX HEAD,SS,ASTM A193,GR B6(TYPE 410),NATURAL,1/2 IN DIA,38.1 MM (1-1/2 IN) LG,13THD,UNC-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1,PACKING SPEC8444-21 APPLIESNA00247BOLT ASSEMBLY MACHINE; M8 X 1.25 X 40 MM,HEX HEAD,STEEL,FULLBODY,BOLT GR 10,NATURAL BOLT,8 MM DIA,40 MM LG,1.25 MM PITCHTHD,METRIC THD SER,25 MM THD LG,ISO 4014 BOLT,HEX NUT,1 NUT(S),NATURAL NUT,LIGHT OILED, PACKING SPEC 8444-21 APPLIESNA00248BOLT ASSEMBLY MACHINE; M8 X 1.25 X 45 MM,HEX HEAD,STEEL,FULLBODY,ASTM A193 BOLT,BOLT GR 10,NATURAL BOLT,7.9 MM (5/16 IN)DIA,45 MM LG,1.25 MM PITCH THD,METRIC COARSE THD SER,25 MM THDLG,ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR2H,NATURAL NUT,ISO 4014,LIGHT OILED, PACKING SPEC 8444-21 APPLIESNA00249BOLT ASSEMBLY MACHINE; M12 X 1.75 X 45 MM,HEX HEAD,STEEL,FULLBODY,ASTM A193 BOLT,BOLT GR B7,BRIGHT BOLT,12 MM DIA,45 MMLG,1.75 MM PITCH THD,METRIC COARSE 6H/6G PER ISO 965 OR ANSIB1.13M THD SER,35 MM THD LG,HEAVY HEX NUT,1 NUT (S),ASTM A194NUT,NUT GR 2H,BRIGHT NUT,PACKING SPEC 8444-21 APPLIESNA00250BOLT ASSEMBLY MACHINE; 1/4-20 X 3/4 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,6.4 MM (1/4 IN) DIA,19.1 MM (3/4 IN)LG,20 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B1.1, ANSI B18.2.1BOLT,HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GR A,CADMIUMELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, BAKED AFTER PLATING AT 180-200 DEG C FOR 2 HOURS,THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS, YELLOW COLOR,PACKING SPEC 8444-21 APPLIESNA00251BOLT ASSEMBLY MACHINE; 1/4-20 X 2 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,6.4 MM (1/4 IN) DIA,50.8 MM (2 IN)LG,20 THD,UNC-2A/2B THD SER,19.1 MM (3/4 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00252BOLT ASSEMBLY MACHINE; 5/16-18 X 1-1/2 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,7.9 MM (5/16 IN) DIA,38.1 MM (1-1/2IN) LG,18 THD,UNC-2A/2B THD SER,25.4 MM (1 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00253BOLT ASSEMBLY MACHINE; 3/8-16 X 3 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,9.5 MM (3/8 IN) DIA,76.2 MM (3 IN)LG,16 THD,UNC-2A/2B THD SER,22.2 MM (7/8 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00254BOLT ASSEMBLY MACHINE; 1/2-13 X 2 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,12.7 MM (1/2 IN) DIA,50.8 MM (2 IN)LG,13 THD,UNC-2A/2B THD SER,34.9 MM (1-3/8 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00255BOLT ASSEMBLY MACHINE; 1/2-13 X 3-1/2 IN,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR B,CADMIUMELECTROPLATED PER ASTM B766 CLASS 5 TYPE II BOLT,12.7 MM (1/2IN) DIA,88.9 MM (3-1/2 IN) LG,13 THD,UNC-2A/2B THD SER,28.6 MM(1-1/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1NUT (S),ASTM A563 NUT,NUT GR A,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1,ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, BAKED AFTERPLATING AT 180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLYAFTER PLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00256BOLT ASSEMBLY MACHINE; 1/2-13 X 4 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,12.7 MM (1/2 IN) DIA,101.6 MM (4 IN)LG,13 THD,UNC-2A/2B THD SER,34.9 MM (1-3/8 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00257BOLT ASSEMBLY MACHINE; 5/8-11 X 1-1/2 IN,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR B,CADMIUMELECTROPLATED PER ASTM B766 CLASS 5 TYPE II BOLT,15.9 MM (5/8IN) DIA,38.1 MM (1-1/2 IN) LG,11 THD,UNC-2A/2B THD SER,FULL THDLG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTMA563 NUT,NUT GR A,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5TYPE II NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1,ANSI B18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATINGPROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00258BOLT ASSEMBLY MACHINE; 5/8-11 X 2 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,15.9 MM (5/8 IN) DIA,50.8 MM (2 IN)LG,11 THD,UNC-2A/2B THD SER,41.3 MM (1-5/8 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00259BOLT ASSEMBLY MACHINE; 3/4-10 X 2 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,19.1 MM (3/4 IN) DIA,50.8 MM (2 IN)LG,10 THD,UNC-2A/2B THD SER,44.5 MM (1-3/4 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00260 BOLT ASSEMBLY MACHINE; 3/4-10 X 3 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,19.1 MM (3/4 IN) DIA,76.2 MM (3 IN)LG,10 THD,UNC-2A/2B THD SER,50.8 MM (2 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00261BOLT ASSEMBLY MACHINE; 3/4-10 X 4 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,19.1 MM (3/4 IN) DIA,101.6 MM (4 IN)LG,10 THD,UNC-2A/2B THD SER,50.8 MM (2 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00262BOLT ASSEMBLY MACHINE; 3/4-10 X 5 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,19.1 MM (3/4 IN) DIA,127.0 MM (5 IN)LG,10 THD,UNC-2A/2B THD SER,50.8 MM (2 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00263BOLT ASSEMBLY MACHINE; 7/8-9 X 3 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,22.2 MM (7/8 IN) DIA,76.2 MM (3 IN)LG,9 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B1.1, ANSI B18.2.1BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GR A,CADMIUMELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, BAKED AFTER PLATING AT 180-200 DEG C FOR 2 HOURS,THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS, YELLOW COLOR,PACKING SPEC 8444-21 APPLIESNA00264BOLT ASSEMBLY MACHINE; 7/8-9 X 3-1/2 IN,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR B,CADMIUMELECTROPLATED PER ASTM B766 CLASS 5 TYPE II BOLT,22.2 MM (7/8IN) DIA,88.9 MM (3-1/2 IN) LG,9 THD,UNC-2A/2B THD SER,57.2 MM(2-1/4 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1NUT (S),ASTM A563 NUT,NUT GR A,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1,ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, BAKED AFTERPLATING AT 180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLYAFTER PLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00265 BOLT ASSEMBLY MACHINE; 7/8-9 X 4-1/2 IN,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR B,CADMIUMELECTROPLATED PER ASTM B766 CLASS 5 TYPE II BOLT,22.2 MM (7/8IN) DIA,114.3 MM (4-1/2 IN) LG,9 THD,UNC-2A/2B THD SER,50.8 MM(2 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT(S),ASTM A563 NUT,NUT GR A,CADMIUM ELECTROPLATED PER ASTM B766CLASS 5 TYPE II NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSIB18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATINGAT 180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTERPLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00266BOLT ASSEMBLY MACHINE; 1-8 X 2-1/4 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,25.4 MM (1 IN) DIA,57.2 MM (2-1/4 IN)LG,8 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B1.1, ANSI B18.2.1BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GR A,CADMIUMELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, BAKED AFTER PLATING AT 180-200 DEG C FOR 2 HOURS,THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS, YELLOW COLOR,PACKING SPEC 8444-21 APPLIESNA00267BOLT ASSEMBLY MACHINE; 1-8 X 4 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,25.4 MM (1 IN) DIA,101.6 MM (4 IN)LG,8 THD,UNC-2A/2B THD SER,63.5 MM (2-1/2 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GRA,CADMIUM ELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEGC FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00268BOLT ASSEMBLY MACHINE; 1-1/2-6 X 4 IN,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR B,CADMIUM ELECTROPLATED PER ASTMB766 CLASS 5 TYPE II BOLT,38.1 MM (1-1/2 IN) DIA,101.6 MM (4 IN)LG,6 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B1.1, ANSI B18.2.1BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563 NUT,NUT GR A,CADMIUMELECTROPLATED PER ASTM B766 CLASS 5 TYPE II NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, BAKED AFTER PLATING AT 180-200 DEG C FOR 2 HOURS,THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS, YELLOW COLOR,PACKING SPEC 8444-21 APPLIESNA00269BOLT ASSEMBLY MACHINE; 1/4-20 X 1 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,6.4 MM (1/4 IN) DIA,25.4 MM (1 IN) LG,20 THD,UNC-2A/2B THDSER,FULL THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1 NUT(S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2 NUT,NUTGR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1,ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKING SPEC8444-21 APPLIESNA00270BOLT ASSEMBLY MACHINE; 1/4-20 X 5 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,6.4 MM (1/4 IN) DIA,127.0 MM (5 IN) LG,20 THD,UNC-2A/2B THDSER,25.4 MM (1 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00271BOLT ASSEMBLY MACHINE; 1/4-20 X 6 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,6.4 MM (1/4 IN) DIA,152.4 MM (6 IN) LG,20 THD,UNC-2A/2B THDSER,22.2 MM (7/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00272BOLT ASSEMBLY MACHINE; 5/16-18 X 3/4 IN,HEX HEAD,CS,FULLBODY,ASTM A307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B,2,BLACK BOLT,7.9 MM (5/16 IN) DIA,19.1 MM (3/4 IN) LG,18THD,UNC-2A/2B THD SER,FULL THD LG,ANSI B1.1, ANSI B18.2.1BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAEJ995 GR 2 NUT,NUT GR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00273BOLT ASSEMBLY MACHINE; 5/16-18 X 5 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,7.9 MM (5/16 IN) DIA,127.0 MM (5 IN) LG,18 THD,UNC-2A/2BTHD SER,22.2 MM (7/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00274BOLT ASSEMBLY MACHINE; 5/16-18 X 6 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,7.9 MM (5/16 IN) DIA,152.4 MM (6 IN) LG,18 THD,UNC-2A/2BTHD SER,22.2 MM (7/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00275BOLT ASSEMBLY MACHINE; 3/8-16 X 5 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,9.5 MM (3/8 IN) DIA,127.0 MM (5 IN) LG,16 THD,UNC-2A/2B THDSER,FULL THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1 NUT(S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2 NUT,NUTGR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1,ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKING SPEC8444-21 APPLIESNA00276BOLT ASSEMBLY MACHINE; 3/8-16 X 6 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,9.5 MM (3/8 IN) DIA,152.4 MM (6 IN) LG,16 THD,UNC-2A/2B THDSER,28.6 MM (1-1/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00277BOLT ASSEMBLY MACHINE; 3/8-16 X 8 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,9.5 MM (3/8 IN) DIA,203.2 MM (8 IN) LG,16 THD,UNC-2A/2B THDSER,34.9 MM (1-3/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00278BOLT ASSEMBLY MACHINE; 3/8-16 X 12 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,9.5 MM (3/8 IN) DIA,304.8 MM (12 IN) LG,16 THD,UNC-2A/2BTHD SER,34.9 MM (1-3/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAEJ995 GR 2 NUT,NUT GR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00279BOLT ASSEMBLY MACHINE; 7/16-14 X 2-1/2 IN,HEX HEAD,CS,FULLBODY,ASTM A307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B,2,BLACK BOLT,11.1 MM (7/16 IN) DIA,63.5 MM (2-1/2 IN) LG,14THD,UNC-2A/2B THD SER,28.575 MM (1-1/8 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194GR 2B OR SAE J995 GR 2 NUT,NUT GR A, 2B, 2,BLACK NUT,ANSI B1.1,ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00280BOLT ASSEMBLY MACHINE; 7/16-14 X 3-1/2 IN,HEX HEAD,CS,FULLBODY,ASTM A307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B,2,BLACK BOLT,11.1 MM (7/16 IN) DIA,88.9 MM (3-1/2 IN) LG,14THD,UNC-2A/2B THD SER,28.58 MM (1-1/8 IN) THD LG,ANSI B1.1, ANSIB18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2BOR SAE J995 GR 2 NUT,NUT GR A, 2B, 2,BLACK NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00281 BOLT ASSEMBLY MACHINE; 1/2-13 X 6 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,CADMIUMPLATED BOLT,12.7 MM (1/2 IN) DIA,152.4 MM (6 IN) LG,13THD,UNC-2A/2B THD SER,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1 NUT(S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2 NUT,NUTGR A, 2,CADMIUM PLATED NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00282BOLT ASSEMBLY MACHINE; 1/2-13 X 12 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,12.7 MM (1/2 IN) DIA,304.8 MM (12 IN) LG,13 THD,UNC-2A/2BTHD SER,41.3 MM (1-5/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAEJ995 GR 2 NUT,NUT GR A, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00283BOLT ASSEMBLY MACHINE; 1/2-13 X 18 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,12.7 MM (1/2 IN) DIA,457.2 MM (18 IN) LG,13 THD,UNC-2A/2BTHD SER,38.1 MM (1-1/2 IN) THD LG,ANSI/ASME B1.1, ANSI B18.2.1BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAEJ995 GR 2 NUT,NUT GR A, 2,BRIGHT NUT,ANSI/ASME B1.1, ANSI/ASMEB18.2.2 NUT,ANSI/ASME B1.1, ANSI/ASME B18.2.1, ANSI/ASMEB18.2.2,WITH NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00284BOLT ASSEMBLY MACHINE; 5/8-11 X 2-1/2 IN,HEX HEAD,CS,FULLBODY,ASTM A307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B,2,CADMIUM PLATED BOLT,15.9 MM (5/8 IN) DIA,63.5 MM (2-1/2 IN)LG,11 THD,UNC-2A/2B THD SER,38.1 MM (1-1/2 IN) THD LG,ANSI B1.1,ANSI B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194GR 2B OR SAE J995 GR 2 NUT,NUT GR A, 2,CADMIUM PLATED NUT,ANSIB1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSIB18.2.2,WITH NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00285BOLT ASSEMBLY MACHINE; 5/8-11 X 10 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,CADMIUMPLATED BOLT,15.9 MM (5/8 IN) DIA,254.0 MM (10 IN) LG,11THD,UNC-2A/2B THD SER,50.8 MM (2 IN) THD LG,ANSI B1.1, ANSIB18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2BOR SAE J995 GR 2 NUT,NUT GR A, 2,CADMIUM PLATED NUT,ANSI B1.1,ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00286BOLT ASSEMBLY MACHINE; 5/8-11 X 16 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,15.9 MM (5/8 IN) DIA,406.4 MM (16 IN) LG,11 THD,UNC-2A/2BTHD SER,50.8 MM (2 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2,BRIGHT NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00287BOLT ASSEMBLY MACHINE; 3/4-10 X 14 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,19.1 MM (3/4 IN) DIA,355.6 MM (14 IN) LG,10 THD,UNC-2A/2BTHD SER,50.8 MM (2 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1,ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKING SPEC8444-21 APPLIESNA00288BOLT ASSEMBLY MACHINE; 3/4-10 X 16 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,19.1 MM (3/4 IN) DIA,406.4 MM (16 IN) LG,10 THD,UNC-2A/2BTHD SER,50.8 MM (2 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1,ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKING SPEC8444-21 APPLIESNA00289BOLT ASSEMBLY MACHINE; 1-8 X 12 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,25.4 MM (1 IN) DIA,304.8 MM (12 IN) LG,8 THD,UNC-2A/2B THDSER,41.3 MM (1-5/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1,ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKING SPEC8444-21 APPLIESNA00290BOLT ASSEMBLY MACHINE; 1-8 X 18 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,NATURALBOLT,25.4 MM (1 IN) DIA,457.2 MM (18 IN) LG,8 THD,UNC-2A/2B THDSER,66.7 MM (2-5/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEXNUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAE J995 GR 2NUT,NUT GR A, 2,NATURAL NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00291BOLT ASSEMBLY MACHINE; 1-1/8-7 X 8 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,CADMIUMPLATED BOLT,28.6 MM (1-1/8 IN DIA,203.2 MM (8 IN) LG,7THD,UNC-2A/2B THD SER,76.2 MM (3 IN) THD LG,ANSI B1.1, ANSIB18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2BOR SAE J995 GR 2 NUT,NUT GR A, 2,CADMIUM PLATED NUT,ANSI B1.1,ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00292BOLT ASSEMBLY MACHINE; 1-1/4-7 X 4 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,CADMIUMPLATED BOLT,31.8 MM (1-1/4 IN) DIA,101.6 MM (4 IN) LG,7THD,UNC-2A/2B THD SER,76.2 MM (3 IN) THD LG,ANSI B1.1, ANSIB18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2BOR SAE J995 GR 2 NUT,NUT GR A, 2,CADMIUM PLATED NUT,ANSI B1.1,ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00302BOLT ASSEMBLY MACHINE; 1/4-28 X 3/4 IN,HEX HEAD,CS,FULLBODY,ASTM A307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B,2,BLACK BOLT,6.4 MM (1/4 IN) DIA,19.1 MM (3/4 IN) LG,28THD,UNF-2A/2B THD SER,FULL THD LG,ANSI B1.1, ANSI B18.2.1BOLT,HEX NUT,1 NUT (S),ASTM A563 GR A OR ASTM A194 GR 2B OR SAEJ995 GR 2 NUT,NUT GR A, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,NOT FOR SOUR SERVICE, PACKING SPEC 8444-21 APPLIESNA00303BOLT ASSEMBLY MACHINE; 1/2-20 X 1 IN,HEX HEAD,CS,FULL BODY,ASTMA307 GR A OR B, OR SAE J429 GR 2 BOLT,BOLT GR A, B, 2,BLACKBOLT,12.7 MM (1/2 IN) DIA,25.4 MM (1 IN) LG,20 THD,UNF-2A/2B THDSER,FULL THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEX NUT,1 NUT(S),ASTM A563 GR A OR ASTM A194 GR 2H OR SAE J995 GR 2 NUT,NUTGR A, 2,BLACK NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSIB18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, NOT FOR SOUR SERVICE,PACKING SPEC 8444-21 APPLIESNA00304BOLT ASSEMBLY MACHINE; 1/2-13 X 12 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,GALV BOLT,12.7 MM (1/2 IN)DIA,304.8 MM (12 IN) LG,13 THD,UNC-2A/2B THD SER,47.6 MM (1-7/8IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT(S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00305BOLT ASSEMBLY MACHINE; 5/8-11 X 18 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,GALV BOLT,15.9 MM (5/8 IN)DIA,457.2 MM (18 IN) LG,11 THD,UNC-2A/2B THD SER,44.5 MM (1-3/4IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT(S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00306BOLT ASSEMBLY MACHINE; 5/8-11 X 20 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,GALV BOLT,15.9 MM (5/8 IN)DIA,508.0 MM (20 IN) LG,11 THD,UNC-2A/2B THD SER,50.8 MM (2 IN)THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTMA563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00307BOLT ASSEMBLY MACHINE; 5/8-11 X 22 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,GALV BOLT,15.9 MM (5/8 IN)DIA,558.8 MM (22 IN) LG,11 THD,UNC-2A/2B THD SER,50.8 MM (2 IN)THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTMA563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00308BOLT ASSEMBLY MACHINE; 7/8-9 X 18 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,GALV BOLT,22.2 MM (7/8 IN)DIA,457.2 MM (18 IN) LG,9 THD,UNC-2A/2B THD SER,69.9 MM (2-3/4IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT(S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00309BOLT ASSEMBLY MACHINE; 7/8-9 X 24 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,GALV BOLT,22.2 MM (7/8 IN)DIA,609.6 MM (24 IN) LG,9 THD,UNC-2A/2B THD SER,152.4 MM (6 IN)THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTMA563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSIB1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00310BOLT ASSEMBLY MACHINE; 7/8-9 X 26 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,GALV BOLT,22.2 MM (7/8 IN)DIA,660.4 MM (26 IN) LG,9 THD,UNC-2A/2B THD SER,63.5 MM (2-1/2IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT(S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00311BOLT ASSEMBLY MACHINE; 1-1/2-6 X 30 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,GALV BOLT,38.1 MM (1-1/2 IN)DIA,762.0 MM (30 IN) LG,6 THD,UNC-2A/2B THD SER,92.1 MM (3-5/8IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT(S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00312BOLT ASSEMBLY MACHINE; 5/16-18 X 1-1/2 IN,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR A,GALV BOLT,7.9 MM (5/16 IN)DIA,38.1 MM (1-1/2 IN) LG,18 THD,UNC-2A/2B THD SER,25.4 MM (1IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT(S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00313BOLT ASSEMBLY MACHINE; 5/8-11 X 3-1/2 IN,SQUARE HEAD,STEEL,FULLBODY,ASTM A320 BOLT,BOLT GR L7,NATURAL BOLT,15.9 MM (5/8 IN)DIA,88.9 MM (3-1/2 IN) LG,11 THD,UNC-2A/2B THD SER,31.8 MM(1-1/4 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1NUT (S),ASTM A194 NUT,NUT GR 4 OR 7,NATURAL NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, IMPACT TESTED TO -150 DEG F, PACKING SPEC 8444-21APPLIESNA00314BOLT ASSEMBLY MACHINE; 3/4-10 X 4-1/4 IN,SQUARE HEAD,STEEL,FULLBODY,ASTM A320 BOLT,BOLT GR L7,NATURAL BOLT,19.1 MM (3/4 IN)DIA,108.0 MM (4-1/4 IN) LG,10 THD,UNC-2A/2B THD SER,54.0 MM(2-1/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1NUT (S),ASTM A194 NUT,NUT GR 4 OR 7,NATURAL NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, IMPACT TESTED TO -150 DEG F, PACKING SPEC 8444-21APPLIESNA00315BOLT ASSEMBLY MACHINE; 3/4-10 X 4-3/4 IN,SQUARE HEAD,STEEL,FULLBODY,ASTM A320 BOLT,BOLT GR L7,NATURAL BOLT,19.1 MM (3/4 IN)DIA,120.7 MM (4-3/4 IN) LG,10 THD,UNC-2A/2B THD SER,60.3 MM(2-3/8 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1NUT (S),ASTM A194 NUT,NUT GR 4 OR 7,NATURAL NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, IMPACT TESTED TO -150 DEG F, PACKING SPEC 8444-21APPLIESNA00316BOLT ASSEMBLY MACHINE; 3/4-10 X 3 IN,SQUARE HEAD,CS,FULLBODY,ASTM A307 BOLT,BOLT GR A,GALV BOLT,19.1 MM (3/4 IN)DIA,76.2 MM (3 IN) LG,10 THD,UNC-2A/2B THD SER,38.1 MM (1-1/2IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,SQUARE NUT,1 NUT(S),ASTM A563 NUT,NUT GR A,GALV NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,DRILLED ON POINT END FOR 0.1875 IN COTTER PIN, WITH COTTER 38.1MM (1-1/2 IN) LG, PACKING SPEC 8444-21 APPLIESNA00317BOLT MACHINE; 1/4-20 X 1-1/4 IN,SQUARE HEAD,CS,ASTM A307,GRA,CADMIUM PLATED,1/4 IN DIA,31.8 MM (1-1/4 IN) LG,20 THD,UNC-2ATHD SER,22.2 MM (7/8 IN) THD LG,ANSI/ASME B18.2.1,PACKING SPEC8444-21 APPLIESNA00318BOLT MACHINE; 5/16-18 X 1-1/4 IN,SQUARE HEAD,CS,ASTM A307,GRA,PHOSPHATED & OILED,5/16 IN DIA,31.8 MM (1-1/4 IN) LG,18THD,UNC-2A THD SER,20.6 MM (13/16 IN) THD LG,ANSI/ASMEB18.2.1,PACKING SPEC 8444-21 APPLIESNA00319BOLT MACHINE; 3/8-16 X 1-1/2 IN,SQUARE HEAD,CS,ASTM A307,GRA,PHOSPHATED & OILED,3/8 IN DIA,38.1 MM (1-1/2 IN) LG,16THD,UNC-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1,PACKING SPECAPPLIESNA00320BOLT MACHINE; 3/8-16 X 2-1/2 IN,SQUARE HEAD,CS,ASTM A307,GRA,PHOSPHATED & OILED,3/8 IN DIA,63.5 MM (2-1/2 IN) LG,16THD,UNC-2A THD SER,57.2 MM (2-1/4 IN) THD LG,ANSI/ASMEB18.2.1,PACKING SPEC 8444-21 APPLIESNA00321BOLT ASSEMBLY MACHINE; 1/2-13 X 1-3/4 IN,SQUARE HEAD,SS,FULLBODY,ASTM A193 BOLT,BOLT GR B8,NATURAL BOLT,12.7 MM (1/2 IN)DIA,44.5 MM (1-3/4 IN) LG,13 THD,UNC-2A/2B THD SER,38.1 MM(1-1/2 IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1NUT (S),ASTM A194 NUT,NUT GR 8F,NATURAL NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00322BOLT ASSEMBLY MACHINE; 1/2-13 X 2 IN,SQUARE HEAD,SS,FULLBODY,ASTM A193 BOLT,BOLT GR B8,NATURAL BOLT,12.7 MM (1/2 IN)DIA,50.8 MM (2 IN) LG,13 THD,UNC-2A/2B THD SER,38.1 MM (1-1/2IN) THD LG,ANSI B1.1, ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT(S),ASTM A194 NUT,NUT GR 8F,NATURAL NUT,ANSI B1.1, ANSI B18.2.2NUT,ANSI B1.1, ANSI B18.2.1, ANSI B18.2.2,WITH NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00324BOLT ASSEMBLY MACHINE; M16 X 2 X 150 MM,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 5.6 PER ISO 898-1 OR ASTM F568,BLACKBOLT,16 MM DIA,150 MM LG,2 MM PITCH THD,METRIC COARSE 6H/6G PERISO 965 OR ANSI B1.13M THD SER,44 MM THD LG,ANSI B18.2.3.5M ORISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO 898-2 NUT,NUTGR 6 OR 8,BLACK NUT,STYLE 1, PER ANSI B18.2.4.1M OR ISO 4032NUT,ANSI B1.13M, ANSI B18.2.3.5M, ANSI B18.2.4.1M, ISO,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00325BOLT ASSEMBLY MACHINE; M24 X 3 X 50 MM,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 5.6 PER ISO 898-1 OR ASTM F568,BLACKBOLT,24 MM DIA,50 MM LG,3 MM PITCH THD,METRIC COARSE 6H/6G PERISO 965 OR ANSI B1.13M THD SER,FULL THD LG,ANSI B18.2.3.5M ORISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO 898-2 NUT,NUTGR 6 OR 8,BLACK NUT,STYLE 1, PER ANSI B18.2.4.1M OR ISO 4032NUT,ANSI B1.13M, ANSI B18.2.3.5M, ANSI B18.2.4.1M, ISO,WITH NUTSCREWED ON, PACKING SPEC 8444-21 APPLIESNA00326BOLT ASSEMBLY MACHINE; M6 X 1 X 25 MM,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 5.6 PER ISO 898-1 OR ASTMF568,CADMIUM ELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C ORASTM B766 CLASS 5 TYPE II BOLT,6 MM DIA,25 MM LG,1 MM PITCHTHD,METRIC COARSE 6H/6G PER ISO 965 OR ANSI B1.13M THD SER,FULLTHD LG,ANSI B18.2.3.5M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTMA563M OR ISO 898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2,PER ANSI B18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSIB18.2.3.5M, ANSI B18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKEDAFTER PLATING AT 180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TOAPPLY AFTER PLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21APPLIESNA00327BOLT ASSEMBLY MACHINE; M6 X 1 X 40 MM,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 5.6 PER ISO 898-1 OR ASTMF568,CADMIUM ELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C ORASTM B766 CLASS 5 TYPE II BOLT,6 MM DIA,40 MM LG,1 MM PITCHTHD,METRIC COARSE 6H/6G PER ISO 965 OR ANSI B1.13M THD SER,19 MMTHD LG,ANSI B18.2.3.5M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTMA563M OR ISO 898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2,PER ANSI B18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSIB18.2.3.5M, ANSI B18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKEDAFTER PLATING AT 180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TOAPPLY AFTER PLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21APPLIESNA00328BOLT ASSEMBLY MACHINE; M6 X 1 X 50 MM,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 5.6 PER ISO 898-1 OR ASTMF568,CADMIUM ELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C ORASTM B766 CLASS 5 TYPE II BOLT,6 MM DIA,50 MM LG,1 MM PITCHTHD,METRIC COARSE 6H/6G PER ISO 965 OR ANSI B1.13M THD SER,19 MMTHD LG,ANSI B18.2.3.5M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTMA563M OR ISO 898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2,PER ANSI B18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSIB18.2.3.5M, ANSI B18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKEDAFTER PLATING AT 180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TOAPPLY AFTER PLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21APPLIESNA00329BOLT ASSEMBLY MACHINE; M10 X 1.5 X 25 MM,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 5.6 PER ISO 898-1 OR ASTMF568,CADMIUM ELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C ORASTM B766 CLASS 5 TYPE II BOLT,10 MM DIA,25 MM LG,1.5 MM PITCHTHD,METRIC COARSE 6H/6G PER ISO 965 OR ANSI B1.13M THD SER,FULLTHD LG,ANSI B18.2.3.5M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTMA563M OR ISO 898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2,PER ANSI B18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSIB18.2.3.5M, ANSI B18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKEDAFTER PLATING AT 180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TOAPPLY AFTER PLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21APPLIESNA00330BOLT ASSEMBLY MACHINE; M12 X 1.75 X 50 MM,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUMELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS5 TYPE II BOLT,12 MM DIA,50 MM LG,1.75 MM PITCH THD,METRICCOARSE 6H/6G PER ISO 965 OR ANSI B1.13M THD SER,25 MM THDLG,ANSI B18.2.3.6M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563MOR ISO 898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO 2082CLASS FE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2, PERANSI B18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M,ANSI B18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKED AFTER PLATING AT180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTERPLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00331BOLT ASSEMBLY MACHINE; M12 X 1.75 X 90 MM,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUMELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS5 TYPE II BOLT,12 MM DIA,90 MM LG,1.75 MM PITCH THD,METRICCOARSE 6H/6G PER ISO 965 OR ANSI B1.13M THD SER,30 MM THDLG,ANSI B18.2.3.6M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563MOR ISO 898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO 2082CLASS FE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2, PERANSI B18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M,ANSI B18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKED AFTER PLATING AT180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTERPLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00332BOLT ASSEMBLY MACHINE; M12 X 1.75 X 100 MM,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUM ELECTROPLATED PERISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II BOLT,12MM DIA,101 MM LG,1.75 MM PITCH THD,METRIC COARSE 6H/6G PER ISO965 OR ANSI B1.13M THD SER,30 MM THD LG,ANSI B18.2.3.6M OR ISO4014 BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO 898-2 NUT,NUT GR9,CADMIUM ELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTMB766 CLASS 5 TYPE II NUT,STYLE 2, PER ANSI B18.2.4.2M OR ISO4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M, ANSI B18.2.4.2M, ISO,WITHNUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEG C FOR 2HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS, YELLOWCOLOR, PACKING SPEC 8444-21 APPLIESNA00333BOLT ASSEMBLY MACHINE; M16 X 2 X 40 MM,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUM ELECTROPLATED PERISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II BOLT,16MM DIA,40 MM LG,2 MM PITCH THD,METRIC COARSE 6H/6G PER ISO 965OR ANSI B1.13M THD SER,31 MM THD LG,ANSI B18.2.3.6M OR ISO 4014BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO 898-2 NUT,NUT GR9,CADMIUM ELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTMB766 CLASS 5 TYPE II NUT,STYLE 2, PER ANSI B18.2.4.2M OR ISO4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M, ANSI B18.2.4.2M, ISO,WITHNUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEG C FOR 2HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS, YELLOWCOLOR, PACKING SPEC 8444-21 APPLIESNA00334BOLT ASSEMBLY MACHINE; M20 X 2.5 X 50 MM,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUMELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS5 TYPE II BOLT,50 MM LG,2.5 MM PITCH THD,METRIC COARSE 6H/6G PERISO 965 OR ANSI B1.13M THD SER,35 MM THD LG,ANSI B18.2.3.6M ORISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO 898-2 NUT,NUTGR 9,CADMIUM ELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C ORASTM B766 CLASS 5 TYPE II NUT,STYLE 2, PER ANSI B18.2.4.2M ORISO 4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M, ANSI B18.2.4.2M,ISO,WITH NUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEG CFOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS,YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00335BOLT ASSEMBLY MACHINE; M20 X 2.5 X 75 MM,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUMELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS5 TYPE II BOLT,2 MM DIA,75 MM LG,2.5 MM PITCH THD,METRIC COARSE6H/6G PER ISO 965 OR ANSI B1.13M THD SER,35 MM THD LG,ANSIB18.2.3.6M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO 2082 CLASSFE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2, PER ANSIB18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M, ANSIB18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKED AFTER PLATING AT180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTERPLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00336BOLT ASSEMBLY MACHINE; M20 X 2.5 X 130 MM,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUMELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS5 TYPE II BOLT,20 MM DIA,130 MM LG,2.5 MM PITCH THD,METRICCOARSE 6H/6G PER ISO 965 OR ANSI B1.13M THD SER,38 MM THDLG,ANSI B18.2.3.6M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563MOR ISO 898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO 2082CLASS FE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2, PERANSI B18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M,ANSI B18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKED AFTER PLATING AT180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTERPLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00337BOLT ASSEMBLY MACHINE; M22 X 2.5 X 75 MM,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6 PER ISO898-1 OR ASTM F568,CADMIUM ELECTROPLATED PER ISO 2082 CLASSFE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II BOLT,20 MM DIA,75 MMLG,2.5 MM PITCH THD,METRIC COARSE 6H/6G PER ISO 965 OR ANSIB1.13M THD SER,38 MM THD LG,ANSI B18.2.3.6M OR ISO 4014 BOLT,HEXNUT,1 NUT (S),ASTM A563M OR ISO 898-2 NUT,NUT GR 9,CADMIUMELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS5 TYPE II NUT,STYLE 2, PER ANSI B18.2.4.2M OR ISO 4033 NUT,ANSIB1.13M, ANSI B18.2.3.6M, ANSI B18.2.4.2M, ISO,WITH NUT SCREWEDON, BAKED AFTER PLATING AT 180-200 DEG C FOR 2 HOURS, THREADTOLERANCES TO APPLY AFTER PLATING PROCESS, YELLOW COLOR, PACKINGSPEC 8444-21 APPLIESNA00338BOLT ASSEMBLY MACHINE; M22 X 2.5 X 90 MM,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUMELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS5 TYPE II BOLT,22 MM DIA,90 MM LG,2.5 MM PITCH THD,METRIC COARSE6H/6G PER ISO 965 OR ANSI B1.13M THD SER,38 MM THD LG,ANSIB18.2.3.6M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO 2082 CLASSFE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2, PER ANSIB18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M, ANSIB18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKED AFTER PLATING AT180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTERPLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00339BOLT ASSEMBLY MACHINE; M22 X 2.5 X 110 MM,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6 PER ISO898-1 OR ASTM F568,CADMIUM ELECTROPLATED PER ISO 2082 CLASSFE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II BOLT,22 MM DIA,110 MMLG,2.5 MM PITCH THD,METRIC COARSE 6H/6G PER ISO 965 OR ANSIB1.13M THD SER,35 MM THD LG,ANSI B18.2.3.6M OR ISO 4014BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A563M OR ISO 898-2 NUT,NUT GR9,CADMIUM ELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTMB766 CLASS 5 TYPE II NUT,STYLE 2, PER ANSI B18.2.4.2M OR ISO4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M, ANSI B18.2.4.2M, ISO,WITHNUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEG C FOR 2HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS, YELLOWCOLOR, PACKING SPEC 8444-21 APPLIESNA00340BOLT ASSEMBLY MACHINE; M24 X 3 X 60 MM,HEAVY HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUM ELECTROPLATED PERISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II BOLT,24MM DIA,60 MM LG,3 MM PITCH THD,METRIC COARSE 6H/6G PER ISO 965OR ANSI B1.13M THD SER,40 MM THD LG,ANSI B18.2.3.6M OR ISO 4014BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO 898-2 NUT,NUT GR9,CADMIUM ELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTMB766 CLASS 5 TYPE II NUT,STYLE 2, PER ANSI B18.2.4.2M OR ISO4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M, ANSI B18.2.4.2M, ISO,WITHNUT SCREWED ON, BAKED AFTER PLATING AT 180-200 DEG C FOR 2HOURS, THREAD TOLERANCES TO APPLY AFTER PLATING PROCESS, YELLOWCOLOR, PACKING SPEC 8444-21 APPLIESNA00341BOLT ASSEMBLY MACHINE; M24 X 3 X 100 MM,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUMELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS5 TYPE II BOLT,24 MM DIA,101 MM LG,3 MM PITCH THD,METRIC COARSE6H/6G PER ISO 965 OR ANSI B1.13M THD SER,44 MM THD LG,ANSIB18.2.3.6M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO 2082 CLASSFE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2, PER ANSIB18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M, ANSIB18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKED AFTER PLATING AT180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTERPLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00342BOLT ASSEMBLY MACHINE; M39 X 4 X 100 MM,HEAVY HEXHEAD,STEEL,FULL BODY,ASTM A307 BOLT,BOLT GR 4.6 OR 5.6,CADMIUMELECTROPLATED PER ISO 2082 CLASS FE/CD 5C 2C OR ASTM B766 CLASS5 TYPE II BOLT,39 MM DIA,101 MM LG,4 MM PITCH THD,METRIC COARSE6H/6G PER ISO 965 OR ANSI B1.13M THD SER,67 MM THD LG,ANSIB18.2.3.6M OR ISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO898-2 NUT,NUT GR 9,CADMIUM ELECTROPLATED PER ISO 2082 CLASSFE/CD 5C 2C OR ASTM B766 CLASS 5 TYPE II NUT,STYLE 2, PER ANSIB18.2.4.2M OR ISO 4033 NUT,ANSI B1.13M, ANSI B18.2.3.6M, ANSIB18.2.4.2M, ISO,WITH NUT SCREWED ON, BAKED AFTER PLATING AT180-200 DEG C FOR 2 HOURS, THREAD TOLERANCES TO APPLY AFTERPLATING PROCESS, YELLOW COLOR, PACKING SPEC 8444-21 APPLIESNA00343BOLT ASSEMBLY MACHINE; M6 X 1 X 25 MM,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 5.6 PER ISO 898-1 OR ASTM F568,GALVBOLT,6 MM DIA,25 MM LG,1 MM PITCH THD,METRIC COARSE 6H/6G PERISO 965 OR ANSI B1.13M THD SER,13 MM THD LG,ANSI B18.2.3.5M ORISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO 898-2 NUT,NUTGR 6,HOT-DIP GALV PER ISO 1461 OR ASTM A153 NUT,STYLE 1, PERANSI B18.2.4.1M OR ISO 4032 NUT,ANSI B1.13M, ANSI B18.2.3.5M,ANSI B18.2.4.1M, ISO,WITH NUT SCREWED ON, PACKING SPEC 8444-21APPLIESNA00344BOLT ASSEMBLY MACHINE; M6 X 1 X 50 MM,HEX HEAD,STEEL,FULLBODY,ASTM A307 BOLT,BOLT GR 5.6 PER ISO 898-1 OR ASTM F568,GALVBOLT,6 MM DIA,50 MM LG,1 MM PITCH THD,METRIC COARSE 6H/6G PERISO 965 OR ANSI B1.13M THD SER,25 MM THD LG,ANSI B18.2.3.5M ORISO 4014 BOLT,HEX NUT,1 NUT (S),ASTM A563M OR ISO 898-2 NUT,NUTGR 6,HOT-DIP GALV PER ISO 1461 OR ASTM A153 NUT,STYLE 1, PERANSI B18.2.4.1M OR ISO 4032 NUT,ANSI B1.13M, ANSI B18.2.3.5M,ANSI B18.2.4.1M, ISO,WITH NUT SCREWED ON, PACKING SPEC 8444-21APPLIESNA00345BOLT ASSEMBLY MACHINE; M10 X 1.5 X 25 MM,HEX HEAD,SS,FULLBODY,TYPE 304 (UNS S30400), DIN W.N 1.4301 OR 1.4303 OR 1.4541,ISO 3506 GR A2-70, DIN 267 PART 11 BOLT,10 MM DIA,25 MMLG,METRIC COARSE THD,6H/6G THD SER,FULL THD LG,THICK HEX NUT,1NUT (S),DIN, ISO,METRIC, WITH NUT SCREWED ONNA00346BOLT ASSEMBLY MACHINE; M12 X 1.75 X 90 MM,HEX HEAD,SS,FULLBODY,TYPE 304 (UNS S30400), DIN W.N 1.4301 OR 1.4303 OR 1.4541,ISO 3506 GR A2-70, DIN 267 PART 11 BOLT,12 MM DIA,90 MMLG,METRIC COARSE THD,6H/6G THD SER,FULL THD LG,THICK HEX NUT,1NUT (S),DIN, ISO,METRIC, WITH NUT SCREWED ONNA00347BOLT ASSEMBLY MACHINE; M12 X 1.75 X 120 MM,HEX HEAD,SS,FULLBODY,TYPE 304 (UNS S30400), DIN W.N 1.4301 OR 1.4303 OR 1.4541,ISO 3506 GR A2-70, DIN 267 PART 11 BOLT,12 MM DIA,120 MMLG,METRIC COARSE THD,6H/6G THD SER,FULL THD LG,THICK HEX NUT,1NUT (S),DIN, ISO,METRIC, WITH NUT SCREWED ONNA00348BOLT ASSEMBLY MACHINE; M16 X 2 X 50 MM,HEX HEAD,SS,FULLBODY,TYPE 304 (UNS S30400), DIN W.N 1.4301 OR 1.4303 OR 1.4541,ISO 3506 GR A2-70, DIN 267 PART 11 BOLT,16 MM DIA,50 MMLG,METRIC COARSE THD,6H/6G THD SER,FULL THD LG,THICK HEX NUT,1NUT (S),DIN, ISO,METRIC, WITH NUT SCREWED ONNA00349BOLT ASSEMBLY MACHINE; M20 X 2.5 X 90 MM,HEX HEAD,SS,FULLBODY,TYPE 304 (UNS S30400), DIN W.N 1.4301 OR 1.4303 OR 1.4541,ISO 3506 GR A2-70, DIN 267 PART 11 BOLT,20 MM DIA,85 MMLG,METRIC COARSE THD,6H/6G THD SER,FULL THD LG,THICK HEX NUT,1NUT (S),DIN, ISO, ANSI/ASME B18.2.3.1 M,METRIC, WITH NUT SCREWEDONNA00350BOLT ASSEMBLY MACHINE; M20 X 2.5 X 100 MM,HEX HEAD,SS,FULLBODY,TYPE 304 (UNS S30400), DIN W.N 1.4301 OR 1.4303 OR 1.4541,ISO 3506 GR A2-70, DIN 267 PART 11 BOLT,20 MM DIA,100 MMLG,METRIC COARSE THD,6H/6G THD SER,FULL THD LG,THICK HEX NUT,1NUT (S),DIN, ISO,METRIC, WITH NUT SCREWED ONNA00351BOLT ASSEMBLY MACHINE; M20 X 2.5 X 150 MM,HEX HEAD,SS,FULLBODY,TYPE 304 (UNS S30400), DIN W.N 1.4301 OR 1.4303 OR 1.4541,ISO 3506 GR A2-70, DIN 267 PART 11 BOLT,20 MM DIA,150 MMLG,METRIC COARSE THD,6H/6G THD SER,FULL THD LG,THICK HEX NUT,1NUT (S),DIN, ISO,METRIC, WITH NUT SCREWED ONNA00352BOLT ASSEMBLY MACHINE; M6 X 1 X 30 MM,HEX HEAD,SS,FULL BODY,TYPE316 (UNS S31600), DIN W.N 1.4401 OR 1.4404 OR 1.4580, ISO 3506GR A4-70, DIN 267 PART 11 BOLT,6 MM DIA,30 MM LG,METRIC COARSETHD,6H/6Q THD SER,FULL THD LG,THICK HEX NUT,1 NUT (S),DIN,ISO,METRIC, WITH NUT SCREWED ON, HARDNESS VICKERS HV 200 TO 275NA00353BOLT ASSEMBLY MACHINE; M6 X 1 X 40 MM,HEX HEAD,SS,FULL BODY,TYPE316 (UNS S31600), DIN W.N 1.4401 OR 1.4404 OR 1.4580, ISO 3506GR A4-70, DIN 267 PART 11 BOLT,6 MM DIA,40 MM LG,METRIC COARSETHD,6H/6Q THD SER,FULL THD LG,THICK HEX NUT,1 NUT (S),DIN,ISO,METRIC, WITH NUT SCREWED ON, HARDNESS VICKERS HV 200 TO 275NA00354BOLT ASSEMBLY MACHINE; M6 X 1 X 45 MM,HEX HEAD,SS,FULL BODY,TYPE316 (UNS S31600), DIN W.N 1.4401 OR 1.4404 OR 1.4580, ISO 3506GR A4-70, DIN 267 PART 11 BOLT,6 MM DIA,45 MM LG,METRIC COARSETHD,6H/6Q THD SER,FULL THD LG,THICK HEX NUT,1 NUT (S),DIN,ISO,METRIC, WITH NUT SCREWED ON, HARDNESS VICKERS HV 200 TO 275NA00355BOLT MACHINE; M12 X 1.75 X 43 MM,CS,ASTM F568,GR 5.8 (METHOD1),PHOSPHATED & OILED,12 MM DIA,43 MM LG,1.75 MM PITCH THD,10 MMTHD LG,DIN 938 GR 8.8,MILLED TYPE, 33 MM THD LG TAP END, PACKINGSPEC 8444-21 APPLIESNA00356BOLT MACHINE; M12 X 1.75 X 90 MM,CS,ASTM A307, ASTM F568,GR 5.8(METHOD 1),PHOSPHATED & OILED,12 MM DIA,90 MM LG,1.75 MM PITCHTHD,10 MM THD LG,DIN 939, DIN 938 GR 8.8,MILLED TYPE, 10 MM THDLG TAP END, PACKING SPEC 8444-21 APPLIESNA00357BOLT; LOCKING, MANHOLE COVER TYPE,5/8-11 X 3-1/4 IN,PENTAGONALHEAD,SS,ASTM A320,GR B8,NATURAL,5/8 IN DIA,82.6 MM (3-1/4 IN)LG,11 THD,UNC 3A THD SER,38.1 MM (1-1/2 IN) THD LG,ANSIB1.1,PACKING SPEC 8444-21 APPLIESNA00358BOLT TOGGLE; NO 10-24 X 4 IN,SPRING WING ROUND HEAD,CS,ASTMA307,GR A,CADMIUM PLATED OR ZINC ELECTROPLATED,3/16 IN DIA,101.6MM (4 IN) LG,7/16 IN DRILL,24 THD,UNC 2A THD SER,ANSI B1.1,SNAPIN, PACKING SPEC 8444-21 APPLIESNA00359BOLT ASSEMBLY U; ROUND BEND SHAPE,1/4-20 X 1-3/4 X 1 X 1IN,CS,ASTM A307,GR B,HOT-DIP GALV,1/2 IN PIPE NPS,1/4 IN DIA,20THD,UNC-2A/2B THD SER,25.4 MM (1 IN) INSIDE W,44.45 MM (1-3/4IN) INSIDE L,HEAVY HEX NUT,2 NUT (S),ASTM A563 NUT,NUT GRA,HOT-DIP GALV NUT,CS PLATE,ANSI/ASME B1.1, ANSI/ASME B18.2.2ASTM A153,25.4 MM (1 IN) THD LG, WITH NUTS SCREWED ON, PACKINGSPEC 8444-21 APPLIESNA00360BOLT ASSEMBLY U; ROUND BEND SHAPE,1/4-20 X 2 X 1-1/8 X 1IN,CS,ASTM A307,GR B,HOT-DIP GALV,3/4 IN PIPE NPS,1/4 IN DIA,20THD,UNC-2A/2B THD SER,28.6 MM (1-1/8 IN) INSIDE W,50.8 MM (2 IN)INSIDE L,HEAVY HEX NUT,2 NUT (S),ASTM A563 NUT,NUT GR A,HOT-DIPGALV NUT,ANSI/ASME B1.1, ANSI/ASME B18.2.2, ASTM A153,25.4 MM (1IN) THD LG, WITH NUTS SCREWED ON, 8444-21 APPLIESNA00361BOLT ASSEMBLY U; ROUND BEND SHAPE,3/8-16 X 1-5/8 IN,CS,ASTMA576,GR ANSI M1018, ANSI M1020, ANSI M1022,BLACK,25.4 MM (1 IN)PIPE NPS,9.5 MM (3/8 IN) DIA,16 THD,UNC-2A/2B THD SER,44.5 MM(1-3/4 IN) INSIDE W,36.5 MM (1-7/16 IN) INSIDE L,HEAVY HEX NUT,2NUT (S),ASTM A194 NUT,NUT GR 2H,BLACK NUT,ANSI B1.1, ANSIB18.2.2,NUTS SCREWED ON, 28.6 MM (1-1/8 IN) THD LG, 44.5 MM(1-3/4 IN) CENTER TO CENTER, 38.1 MM (1-1/2 IN) CENTER OF TUBETO END OF BOLT, PACKING SPEC 8444-21 APPLIESNA00362BOLT ASSEMBLY U; ROUND BEND SHAPE,3/8-16 X 2-1/4 IN,CS,ASTMA576,GR ANSI M1018, ANSI M1020, ANSI M1022,BLACK,38.1 MM (1-1/2IN) PIPE NPS,9.5 MM (3/8 IN) DIA,16 THD,UNC-2A/2B THD SER,60.3MM (2-3/8 IN) CENTER TO CENTER INSIDE W,54.0 MM (2-1/4 IN)CENTER OF TUBE INSIDE L,HEAVY HEX NUT,2 NUT (S),ASTM A194NUT,NUT GR 2H,BLACK NUT,ANSI B1.1, ANSI B18.2.2,NUTS SCREWED ON,31.8 MM (1-1/4 IN) THD LG, 60.3 MM (2-3/8 IN) CENTER TO CENTER,54.0 MM (2-1/8 IN) CENTER OF TUBE TO END OF BOLT, PACKING SPEC8444-21 APPLIESNA00363BOLT ASSEMBLY U; ROUND BEND SHAPE,3/8-16 X 3-1/4 IN,CS,ASTMA576,GR ANSI M1018, ANSI M1020, ANSI M1022,BLACK,50.8 MM (2 IN)PIPE NPS,9.5 MM (3/8 IN) DIA,16 THD,UNC-2A/2B THD SER,71.4 MM(2-13/16 IN) INSIDE W,63.5 MM (2-1/2 IN) INSIDE L,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2H,BLACK NUT,ANSI B1.1, ANSIB18.2.2,NUTS SCREWED ON, 31.8 MM (1-1/4 IN) THD LG, 71.4 MM(2-13/16 IN) CENTER TO CENTER, 57.2 MM (2-1/4 IN) CENTER OF TUBETO END OF BOLT, PACKING SPEC 8444-21 APPLIESNA00364BOLT ASSEMBLY U; ROUND BEND SHAPE,1/2-13 X 4-1/4 IN,CS,ASTMA576,GR ANSI M1018, ANSI M1020, ANSI M1022,BLACK,76.2 MM (3 IN)PIPE NPS,12.7 MM (1/2 IN) DIA,13 THD,UNC-2A/2B THD SER,104.8 MM(4-1/8 IN) INSIDE W,92.1 MM (3-5/8 IN) INSIDE L,HEAVY HEX NUT,2NUT (S),ASTM A194 NUT,NUT GR 2H,BLACK NUT,ANSI B1.1, ANSIB18.2.2,NUTS SCREWED ON, 76.2 MM (3 IN) THD LG, 103.2 MM (4-1/16IN) CENTER TO CENTER, 101.6 MM (4 IN) CENTER OF TUBE TO END OFBOLT, PACKING SPEC 8444-21 APPLIESNA00365BOLT ASSEMBLY U; ROUND BEND SHAPE,1/2-13 X 7-1/16 IN,CS,ASTMA576,GR ANSI M1018, ANSI M1020, ANSI M1022,BLACK,101.6 MM (4 IN)PIPE NPS,12.7 MM (1/2 IN) DIA,13 THD,UNC-2A/2B THD SER,130.2 MM(5-1/8 IN) INSIDE W,179.4 MM (7-1/16 IN) INSIDE L,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2H,BLACK NUT,ANSI B1.1, ANSIB18.2.2,NUTS SCREWED ON, 76.2 MM (3 IN) THD LG, 142.89 MM (5-5/8IN) CENTER TO CENTER, 114.3 MM (4-1/2 IN) CENTER OF TUBE TO ENDOF BOLT, PACKING SPEC 8444-21 APPLIESNA00366BOLT ASSEMBLY U; ROUND BEND SHAPE,1/2-13 X 3-1/2 X 2-7/16 X 2U-BOLT,SS,ASTM A276,GR UNS S31000 (AISI 310), JISG4318-SUS310S,NATURAL,50.8 MM (2 IN) PIPE NPS,12.7 MM (1/2 IN)DIA,13 THD,UNC-2A/2B THD SER,61.9 MM (2-7/16 IN) INSIDE W,88.9MM (3-1/2 IN) INSIDE L,HEX NUT,2 NUT (S),ASTM A194 NUT,NUT GR 8,AISI 304,NATURAL NUT,ANSI B1.1, ANSI B18.2.2,NUTS SCREWED ON,50.8 MM (2 IN) THD LG, 74.6 MM (2-15/16 IN) CENTER TO CENTER,57.2 MM (2-1/4 IN) CENTER OF TUBE TO END OF BOLT, PACKING SPEC8444-21 APPLIESNA00367BOLT ASSEMBLY U; ROUND BEND SHAPE,1/2-13 X 3-1/2 IN,SS,ASTMA276,GR UNS S31000 (AISI 310), JIS G4318-SUS310S,NATURAL,76.2 MM(3 IN) PIPE NPS,12.7 MM (1/2 IN) DIA,13 THD,UNC-2A/2B THDSER,104.8 MM (4-1/8 IN) INSIDE W,93.6 MM (3-11/16 IN) INSIDEL,HEX NUT,2 NUT (S),ASTM A194 NUT,NUT GR 8, AISI 304,NATURALNUT,ANSI B1.1, ANSI B18.2.2,NUTS SCREWED ON, 50.8 MM (2 IN) THDLG, 103.2 MM (4-1/16 IN) CENTER TO CENTER, 76.2 MM (3 IN) CENTEROF TUBE TO END OF BOLT, PACKING SPEC 8444-21 APPLIESNA00368BOLT ASSEMBLY MACHINE; 1/2-13 X 3-1/2 IN,HEX HEAD,SS,FULLBODY,ASTM A193 BOLT,BOLT GR B8,NATURAL BOLT,12.7 MM (1/2 IN)DIA,88.9 MM (3-1/2 IN) LG,13 THD,UNC-2A/2B THD SER,25.4 MM (1IN) THD LG,ANSI B1.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194NUT,NUT GR 8,NATURAL NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1,ANSI B18.2.2,WITH NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00369BOLT ASSEMBLY MACHINE; 1/2-13 X 4-1/2 IN,HEAVY HEX HEAD,SS,ASTMA193 BOLT,BOLT GR B8,NATURAL BOLT,12.7 MM (1/2 IN) DIA,114.3 MM(4-1/2 IN) LG,13 THD,UNC-2A/2B THD SER,25.4 MM (1 IN) THDLG,ANSI B1.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR8,NATURAL NUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSIB18.2.2,WITH NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00370BOLT EYE; REGULAR PATTERN,3/8-16 X 1-1/4 IN,CS,ASTMA489,BLACK,3/8 IN DIA,25.4 MM (1 IN) ID EYE,16 THD,UNC-2A THDSER,31.8 MM (1-1/4 IN) THD LG,31.8 MM (1-1/4 IN) SHANK LG,9.5 MM(3/8 IN) CROSS EY,0.7 TON SUPPLY,ANSI/ASME B18.15,PACKING SPEC8444-21 APPLIESNA00371BOLT EYE; REGULAR PATTERN,1/2-13 X 1-1/2 IN,CS,ASTMA489,BLACK,1/2 IN DIA,30.2 MM (1-3/16 IN) ID EYE,13 THD,UNC-2ATHD SER,38.1 MM (1-1/2 IN) THD LG,38.1 MM (1-1/2 IN) SHANKLG,12.7 MM (1/2 IN) CROSS EY,1.3 TON SUPPLY,ANSI/ASMEB18.15,PACKING SPEC 8444-21 APPLIESNA00372BOLT EYE; REGULAR PATTERN,5/8-11 X 1-3/4 IN,CS,ASTMA489,BLACK,5/8 IN DIA,34.9 MM (1-3/8 IN) ID EYE,11 THD,UNC-2ATHD SER,44.5 MM (1-3/4 IN) THD LG,44.5 MM (1-3/4 IN) SHANKLG,15.9 MM (5/8 IN) CROSS EY,2 TON SUPPLY,ANSI/ASMEB18.15,PACKING SPEC 8444-21 APPLIESNA00373BOLT EYE; REGULAR PATTERN,3/4-10 X 2 IN,CS,ASTM A489,BLACK,3/4IN DIA,38.1 MM (1-1/2 IN) ID EYE,10 THD,UNC-2A THD SER,50.8 MM(2 IN) THD LG,50.8 MM (2 IN) SHANK LG,19.1 MM (3/4 IN) CROSSEY,3 TON SUPPLY,ANSI/ASME B18.15,PACKING SPEC 8444-21 APPLIESNA00374BOLT EYE; REGULAR PATTERN,7/8-9 X 2-1/4 IN,CS,ASTMA489,BLACK,7/8 IN DIA,42.9 MM (1-11/16 IN) ID EYE,9 THD,UNC-2ATHD SER,57.1 MM (2-1/4 IN) THD LG,57.1 MM (2-1/4 IN) SHANKLG,22.2 MM (7/8 IN) CROSS EY,3.5 TON SUPPLY,ANSI/ASMEB18.15,PACKING SPEC 8444-21 APPLIESNA00375BOLT EYE; REGULAR PATTERN,1-1/4-7 X 3 IN,CS,ASTMA489,BLACK,1-1/4 IN DIA,55.6 MM (2-3/16 IN) ID EYE,7 THD,UNC-2ATHD SER,76.2 MM (3 IN) THD LG,76.2 MM (3 IN) SHANK LG,31.8 MM(1-1/4 IN) CROSS EY,7.5 TON SUPPLY,ANSI/ASME B18.15,DROP FORGED,PACKING SPEC 8444-21 APPLIESNA00376BOLT ASSEMBLY EYE; REGULAR PATTERN,3/8-16 X 4-1/4 IN,CS,ASTMA489 BOLT,GALV BOLT,9.5 MM (3/8 IN) DIA,16 THD,UNC-2A/2B THDSER,50.8 MM (2 IN) THD LG,108.0 MM (4-1/4 IN) SHANK LG,19.1 MM(3/4 IN) ID EYE,38.1 MM (1-1/2 IN) CROSS EY,ANSI B1.1 BOLT,HEXNUT,1 NUT (S),ASTM A194 NUT,NUT GR 2H,GALV NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.2,NUT SCREWED ON, PACKING SPEC8444-21 APPLIESNA00377BOLT ASSEMBLY EYE; REGULAR PATTERN,3/8-16 X 8-1/2 IN,CS,ASTMA489 BOLT,GALV BOLT,9.5 MM (3/8 IN) DIA,16 THD,UNC-2A/2B THDSER,152.4 MM (6 IN) THD LG,177.8 MM (7 IN) SHANK LG,19.1 MM (3/4IN) ID EYE,9.5 MM (3/8 IN) CROSS EY,ANSI B1.1, ANSI B18.15BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 2H,GALVNUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.2, ANSIB18.15,NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00378BOLT ASSEMBLY EYE; SHOULDER PATTERN,1/4-20 X 4 IN,CS,ASTM A489BOLT,GALV BOLT,6.2 MM (1/4 IN) DIA,20 THD,UNC-2A/2B THD SER,63.5MM (2-1/5 IN) THD LG,101.6 MM (4 IN) SHANK LG,12.7 MM (1/2 IN)ID EYE,6.4 MM (1/4 IN) CROSS EY,ANSI B1.1, ANSI B18.15 BOLT,HEXNUT,1 NUT (S),ASTM A194 NUT,NUT GR 2H,GALV NUT,ANSI B1.1, ANSIB18.2.2 NUT,ANSI B1.1, ANSI B18.2.2, ANSI B18.15,NUT SCREWED ON,PACKING SPEC 8444-21 APPLIESNA00379BOLT ASSEMBLY EYE; SHOULDER PATTERN,3/4-10 X 6 IN,CS,ASTM A489BOLT,GALV BOLT,19.1 MM (3/4 IN) DIA,10 THD,UNC-2A/2B THDSER,76.2 MM (3 IN) THD LG,152.4 MM (6 IN) SHANK LG,38.1 MM(1-1/2 IN) ID EYE,15.9 MM (5/8 IN) CROSS EY,ANSI B1.1, ANSIB18.15 BOLT,HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 2H,GALVNUT,ANSI B1.1, ANSI B18.2.2 NUT,ANSI B1.1, ANSI B18.2.2, ANSIB18.15,NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA00380BOLT ASSEMBLY EYE; REGULAR PATTERN,7/8-9 X 7 IN,STEEL ALLOY,ASTMA193 BOLT,BOLT GR B7 AISI 4140,QUENCHED & TEMPERED BOLT,22.2 MM(7/8 IN) DIA,9 THD,UNC-2A/2B THD SER,46.0 MM (1-13/16 IN) THDLG,177.8 MM (7 IN) SHANK LG,177.8-203.2 MM (7-8 IN) ID EYE,23.8MM (15/16 IN) CROSS EY,ANSI B1.1 BOLT,HEX NUT,1 NUT (S),ASTMA194 NUT,NUT GR 2H,GALV NUT,ANSI B1.1 NUT,ANSI B1.1,NUT SCREWEDON, PACKING SPEC 8444-21 APPLIESNA00927BOLT MACHINE; M5 X 0.8 X 25 MM,HEX HEAD,CS,ISO 4014,GR8.8,PHOSPHATED & OILED,5 MM DIA,25 MM LG,0.8 MM PITCH THD,ISOMETRIC COARSE-6G THD SER,16 MM THD LGNA00928BOLT ASSEMBLY MACHINE; M14 X 2 X 30 MM,HEX HEAD,CS,ISO 4017BOLT,BOLT GR 8.8,BLACK & LIGHT OILED BOLT,14 MM DIA,30 MM LG,2MM PITCH THD,ISO METRIC COARSE-6G/6H THD SER,FULL THD LG,HEX,STYLE 1 NUT,1 NUT (S),ISO 4032 NUT,NUT GR 8,BLACK & LIGHT OILEDNUT,WITH NUT SCREWED ONNA00933BOLT ASSEMBLY MACHINE; 1/4-20 X 2-1/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316,CONDITION CW1 BOLT,1/4 IN DIA,57.6 MM(2-1/4 IN) LG,20 THD,UNC-2A/2B THD SER,19.1 MM (3/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GRTYPE 316,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITH NUTSCREWED ONNA00934BOLT ASSEMBLY MACHINE; 1/4-20 X 2-1/2 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B8 CL 2 (TYPE 304),1/4 IN DIA,63.5 MM (2-1/2 IN)LG,20 THD,UNC-2A/2B THD SER,19.1 MM (3/4 IN) THD LG,ANSI/ASMEB18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 8(TYPE 304),ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA00935BOLT ASSEMBLY MACHINE; 5/16-18 X 3/4 IN,HEX HEAD,ALLOYSTEEL,ASTM A193 BOLT,BOLT GR B7,PHOSPHATED & LIGHT OILEDBOLT,5/16 IN DIA,19.1 MM (3/4 IN) LG,18 THD,UNC-2A/2B THDSER,FULL THD LG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT(S),ASTM A194 NUT,NUT GR 2H,PHOSPHATED & LIGHT OILEDNUT,ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA00936BOLT ASSEMBLY MACHINE; 5/16-18 X 1-1/2 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B8 CL 2 (TYPE 304),5/16 IN DIA,38.1 MM (1-1/2 IN)LG,18 THD,UNC-2A/2B THD SER,22.2 MM (7/8 IN) THD LG,ANSI/ASMEB18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 8(TYPE 304),ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA00937BOLT MACHINE; 3/8-16 X 3/4 IN,HEX HEAD,SS,ASTM F593,GR UNSS41000 (TYPE 410),CONDITION H,3/8 IN DIA,19.1 MM (3/4 IN) LG,16THD,UNC-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1NA00938BOLT MACHINE; 3/8-16 X 1 IN,HEX HEAD,SS,ASTM A167,GR TYPE309S,BRIGHT WITH PROTECTIVE COATING,3/8 IN DIA,25.4 MM (1 IN)LG,16 THD,UNC-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1,FLATPOINT, USED ON TAG# CV14ABNA00939BOLT ASSEMBLY MACHINE; 3/8-16 X 1-1/4 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B8 CL 2 (TYPE 304),3/8 IN DIA,31.8 MM (1-1/4 IN)LG,16 THD,UNC-2A/2B THD SER,25.4 MM (1 IN) THD LG,ANSI/ASMEB18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 8(TYPE 304),ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA00940BOLT MACHINE; 3/8-16 X 1-1/2 IN,HEX HEAD,SS,ASTM A193,GR B8CCLASS 2 (TYPE 347),3/8 IN DIA,38.1 MM (1-1/2 IN) LG,16THD,UNC-2A THD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA00941BOLT MACHINE; 3/8-16 X 1-1/2 IN,HEX HEAD,SS,ASTM F593,GR UNSS41000 (TYPE 410),CONDITION H,3/8 IN DIA,38.1 MM (1-1/2 IN)LG,16 THD,UNC-2A THD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA00942BOLT MACHINE; 3/8-16 X 1-1/2 IN,HEX HEAD,ALLOY STEEL,ASTMA193,GR B7,PHOSPHATED & OILED,3/8 IN DIA,38.1 MM (1-1/2 IN)LG,16 THD,UNC-2A THD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA00943BOLT MACHINE; 3/8-16 X 1-1/2 IN,HEX HEAD,SS,ASTM F593,GR UNSS30400 (TYPE 304),CONDITION CW1,3/8 IN DIA,38.1 MM (1-1/2 IN)LG,16 THD,UNC-2A THD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA00944BOLT MACHINE; 3/8-16 X 1-1/2 IN,HEX HEAD,SS,ASTM F593,GR UNSS31600 (TYPE 316),CONDITION CW1,3/8 IN DIA,38.1 MM (1-1/2 IN)LG,16 THD,UNC-2A THD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA00945BOLT MACHINE; 3/8-16 X 1-3/4 IN,HEX HEAD,SS,ASTM A193,GR B8CLASS 2 (TYPE 304),3/8 IN DIA,44.5 MM (1-3/4 IN) LG,16THD,UNC-2A THD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA00946BOLT MACHINE; 3/8-16 X 2 IN,HEX HEAD,SS,ASTM F593,GR UNS S31600(TYPE 316),CONDITION CW1,3/8 IN DIA,50.8 MM (2 IN) LG,16THD,UNC-2A THD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA00947BOLT MACHINE; 3/8-16 X 2-3/4 IN,HEX HEAD,SS,ASTM F593,GR UNSS41000 (TYPE 410),CONDITION H,3/8 IN DIA,69.9 MM (2-3/4 IN)LG,16 THD,UNC-2A THD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA00948BOLT MACHINE; 3/8-16 X 4-1/2 IN,HEX HEAD,SS,ASTM F593,GR UNSS41000 (TYPE 410),CONDITION H,3/8 IN DIA,114.3 MM (4-1/2 IN)LG,16 THD,UNC-2A THD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA00949BOLT MACHINE; 3/8-16 X 11-1/2 IN,HEX HEAD,SS,ASTM F593,GR UNSS41000 (TYPE 410),CONDITION H,3/8 IN DIA,292.1 MM (11-1/2 IN)LG,16 THD,UNC-2A THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI/ASMEB18.2.1NA00950BOLT MACHINE; 1/2-13 X 1-1/4 IN,HEX HEAD,SS,ASTM A193,GR B8CCLASS 2 (TYPE 347),1/2 IN DIA,31.8 MM (1-1/4 IN) LG,13THD,UNC-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1,USED ON TAGLXV1002&3NA00951BOLT ASSEMBLY MACHINE; 1/2-13 X 1-1/4 IN,NEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316L,CONDITION CW1 BOLT,1/2 IN DIA,31.75 MM(1-1/4 IN) LG,13 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI/ASMEB18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GR TYPE316L,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA00952BOLT MACHINE; 1/2-13 X 1-1/2 IN,HEX HEAD,SS,ASTM A193,GR B8CLASS 2 (TYPE 304),1/2 IN DIA,38.1 MM (1-1/2 IN) LG,13THD,UNC-2A THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI/ASME B18.2.1NA00953BOLT MACHINE; 1/2-13 X 1-3/8 IN,HEX HEAD,SS,ASTM A193,GR B8CLASS 2 (TYPE 304),1/2 IN DIA,34.9 MM (1-3/8 IN) LG,13THD,UNC-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1NA00954BOLT ASSEMBLY MACHINE; 1/2-13 X 1-1/2 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B8 CL 2 (TYPE 304),1/2 IN DIA,38.1 MM (1-1/2 IN)LG,13 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI/ASMEB18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 8(TYPE 304),ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA00955BOLT ASSEMBLY MACHINE; 1/2-13 X 1-1/2 IN,HEX HEAD,MONEL,ASTMF468 BOLT,BOLT GR UNS N04400 (ALLOY 400),1/2 IN DIA,38.1 MM(1-1/2 IN) LG,13 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F467 NUT,NUT GRUNS N04400 (ALLOY 400),ANSI/ASME B18.2.2 NUT,NICKEL ALLOY, WITHNUT SCREWED ONNA00956BOLT MACHINE; 1/2-13 X 1-1/2 IN,HEX HEAD,ALLOY STEEL,ASTMA193,GR B7,PHOSPHATED & OILED,1/2 IN DIA,38.1 MM (1-1/2 IN)LG,13 THD,UNC-2A THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI/ASMEB18.2.1NA00957BOLT MACHINE; 1/2-13 X 1-3/4 IN,HEX HEAD,SS,ASTM A193,GR B8CCLASS 2 (TYPE 347),1/2 IN DIA,44.5 MM (1-3/4 IN) LG,13THD,UNC-2A THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI/ASME B18.2.1NA00958BOLT ASSEMBLY MACHINE; 1/2-13 X 2 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316L,CONDITION CW1 BOLT,1/2 IN DIA,50.8 MM (2IN) LG,13 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GRTYPE 316L,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITH NUTSCREWED ONNA00959BOLT ASSEMBLY MACHINE; 1/2-13 X 2 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 410,CONDITION H BOLT,1/2 IN DIA,50.8 MM (2 IN)LG,13 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI/ASMEB18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GR TYPE410,CONDITION H NUT,ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA00960BOLT MACHINE; 1/2-13 X 2 IN,HEX HEAD,SS,ASTM A193,GR B6 (TYPE410),1/2 IN DIA,50.8 MM (2 IN) LG,13 THD,UNC-2A THD SER,31.8 MM(1-1/4 IN) THD LG,ANSI/ASME B18.2.1NA00961BOLT MACHINE; M12 X 1.75 X 50 MM,HEX HEAD,SS,ISO 3506 OR ASTMF738M,GR A2 (TYPE 347),CONDITION SH,12 MM DIA,50 MM LG,1.75 MMPITCH THD,ISO METRIC COARSE-6G THD SER,30 MM THD LG,ISO 4014NA00962BOLT ASSEMBLY MACHINE; 1/2-13 X 2-1/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 304L,CONDITION CW1 BOLT,1/2 IN DIA,57.0 MM(2-1/4 IN) LG,13 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GRTYPE 304L,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITH NUTSCREWED ONNA00963BOLT MACHINE; M12 X 1.75 X 65 MM,HEX HEAD,SS,ISO 3506 OR ASTMF738M,GR A2 (TYPE 347),CONDITION SH,12 MM DIA,65 MM LG,1.75 MMPITCH THD,ISO METRIC COARSE-6G THD SER,30 MM THD LG,ISO 4014NA00964BOLT MACHINE; 1/2-13 X 2-3/4 IN,HEX HEAD,SS,ASTM A193,GR B8CCLASS 2 (TYPE 347),1/2 IN DIA,69.9 MM (2-3/4 IN) LG,13THD,UNC-2A THD SER,31.8 MM (1-1/4 IN) THD LG,ANSI/ASME B18.2.1NA00965BOLT ASSEMBLY MACHINE; 5/8-11 X 1-1/2 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B8 CL 2 (TYPE 304),5/8 IN DIA,38.1 MM (1-1/2 IN)LG,11 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI/ASME B18.2.1BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 8 (TYPE304),ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA00966BOLT MACHINE; 5/8-11 X 1-1/2 IN,HEX HEAD,SS,ASTM A193,GR B8CLASS 2 (TYPE 304),5/8 IN DIA,38.1 MM (1-1/2 IN) LG,11THD,UNC-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1NA00967BOLT ASSEMBLY MACHINE; 5/8-11 X 1-1/2 IN,HEX HEAD,MONEL,ASTMF468 BOLT,BOLT GR UNS N04400 (ALLOY 400),5/8 IN DIA,38.1 MM(1-1/2 IN) LG,11 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI/ASMEB18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F467 NUT,NUT GR UNS N04400(ALLOY 400),ANSI/ASME B18.2.2 NUT,NICKEL ALLOY, WITH NUT SCREWEDONNA00968BOLT MACHINE; 5/8-11 X 1-3/4 IN,HEX HEAD,SS,ASTM F593,GR UNSS32100 (TYPE 321),CONDITION CW1,5/8 IN DIA,44.5 MM (1-3/4 IN)LG,11 THD,UNC-2A THD SER,38.1 MM (1-1/2 IN) THD LG,ANSI/ASMEB18.2.1NA00969BOLT MACHINE; 5/8-11 X 2-1/2 IN,HEX HEAD,SS,ASTM A193,GR TYPE310,5/8 IN DIA,2-1/2 IN LG,11 THD,BOLT UNC-2A / NUT UNC-2B THDSER,FULL THD LG,CHAMFERED ENDNA00970BOLT ASSEMBLY U; ROUND BEND SHAPE,5/8-11 X 9-1/2 X 6-3/4 X 3-3/4IN,CS,ASTM A307,GR B,HOT DIP GALV,6 IN PIPE NPS,5/8 IN DIA,11THD,UNC-2A/2B THD SER,171.4 MM (6-3/4 IN) INSIDE W,241.3 MM(9-1/2 IN) INSIDE L,HEAVY HEX NUT,4 NUT (S),ASTM A563 NUT,NUT GRA,HOT DIP GALV NUT,ANSI/ASME B1.1, ANSI/ASME B18.2.2 ASTMA153,95 MM (3-3/4 IN) THREAD LENGTH WITH NUT(S) SCREWED-ON,PACKING CODE 844421 APPLIES.NA00971BOLT ASSEMBLY MACHINE; 5/8-11 X 3-1/2 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B8 CL 2 (TYPE 304),5/8 IN DIA,88.9 MM (3-1/2 IN)LG,11 THD,UNC-2A/2B THD SER,38.1 MM (1-1/2 IN) THD LG,ANSI/ASMEB18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 8(TYPE 304),ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA00972BOLT ASSEMBLY MACHINE; 3/4-10 X 2 IN,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B8 CL 2 (TYPE 304),3/4 IN DIA,50.8 MM (2 IN) LG,10THD,UNC-2A/2B THD SER,FULL THD LG,ANSI/ASME B18.2.1 BOLT,HEAVYHEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 8 (TYPE 304),ANSI/ASMEB18.2.2 NUT,WITH NUT SCREWED ONNA00973BOLT ASSEMBLY MACHINE; 3/4-10 X 2 IN,HEX HEAD,STEEL,ASTM A193BOLT,BOLT GR B5 (TYPE 501),LIGHT OILED BOLT,3/4 IN DIA,50.8 MM(2 IN) LG,10 THD,UNC-2A/2B THD SER,44.5 MM (1-3/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR3 (TYPE 501),LIGHT OILED NUT,ANSI/ASME B18.2.2 NUT,WITH NUTSCREWED ONNA00974BOLT ASSEMBLY MACHINE; 3/4-10 X 2-1/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 410,CONDITION H BOLT,3/4 IN DIA,57.2 MM (2-1/4IN) LG,10 THD,UNC-2A/2B THD SER,44.5 MM (1-3/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594NUT,NUT GR TYPE 410,CONDITION H NUT,ANSI/ASME B18.2.2 NUT,WITHNUT SCREWED ONNA00975BOLT ASSEMBLY MACHINE; 3/4-10 X 2-1/4 IN,HEX HEAD,STEEL,ASTMA193 BOLT,BOLT GR B5 (TYPE 501),LIGHT OILED BOLT,3/4 IN DIA,57.2MM (2-1/4 IN) LG,10 THD,UNC-2A/2B THD SER,44.5 MM (1-3/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR3 (TYPE 501),LIGHT OILED NUT,ANSI/ASME B18.2.2 NUT,WITH NUTSCREWED ONNA00976BOLT MACHINE; 3/4-10 X 3 IN,HEX HEAD,SS,ASTM A193,GR B8C CLASS 2(TYPE 347),3/4 IN DIA,76.2 MM (3 IN) LG,10 THD,UNC-2A THDSER,44.5 MM (1-3/4 IN) THD LG,ANSI/ASME B18.2.1NA00977BOLT MACHINE; 3/4-10 X 5-1/2 IN,HEX HEAD,SS,ASTM A193,GR B8CCLASS 2 (TYPE 347),3/4 IN DIA,139.7 MM (5-1/2 IN) LG,10THD,UNC-2A THD SER,44.5 MM (1-3/4 IN) THD LG,ANSI/ASME B18.2.1NA00978BOLT ASSEMBLY MACHINE; 3/4-10 X 12-1/2 IN,HEX HEAD,STEEL,ASTMA193 BOLT,BOLT GR B5 (TYPE 501),LIGHT OILED BOLT,3/4 INDIA,317.5 MM (12-1/2 IN) LG,10 THD,UNC-2A/2B THD SER,50.8 MM (2IN) THD LG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A194NUT,NUT GR 3 (TYPE 501),LIGHT OILED NUT,ANSI/ASME B18.2.2NUT,WITH NUT SCREWED ONNA00979BOLT EYE; SHOULDER PATTERN,1-1/8-7 X 2-3/4 IN,CS,ASTMA489,DROP-FORGED, BLACK,1-1/8 IN DIA,50.8 MM (2 IN) ID EYE,7THD,UNC-2A THD SER,58.7 MM (2-5/16 IN) THD LG,69.9 MM (2-3/4 IN)SHANK LG,25.4 MM (1 IN) CROSS EY,4.50 METRIC TON (9920 LB)SUPPLY,ANSI/ASME B18.15NA00980BOLT EYE; SHOULDER PATTERN,M10 X 1.5 X 17 MM,CS,DIN 580,GR C15,DROP FORGED, BLACK,10 MM DIA,25 MM ID EYE,1.5 MM PITCHTHD,ISO METRIC COARSE THD SER,17 MM THD LG,17 MM SHANK LG,10 MMCROSS EY,0.23 METRIC TON SUPPLYNA00981BOLT EYE; SHOULDER PATTERN,M30 X 3.5 X 45 MM,CS,DIN 580,GR C15,DROP FORGED, BLACK,30 MM DIA,60 MM ID EYE,3.5 MM PITCHTHD,ISO METRIC COARSE THD SER,45 MM THD LG,45 MM SHANK LG,24 MMCROSS EY,3.60 METRIC TON SUPPLYNA00982BOLT MACHINE; M8 X 1.25 X 16 MM,HEX HEAD,SS,ISO 3506 OR ASTMF738M,GR A2-70 (TYPE 304),8 MM DIA,16 MM LG,1.25 MM PITCHTHD,ISO METRIC COARSE-6G THD SER,FULL THD LG,ISO 4017NA00983BOLT ASSEMBLY MACHINE; M12 X 1.75 X 35 MM,HEX HEAD,CS,ISO 4017BOLT,BOLT GR 5.6,BLACK OXIDE & LIGHT OILED BOLT,12 MM DIA,35 MMLG,1.75 MM PITCH THD,ISO METRIC COARSE-6G/6H THD SER,FULL THDLG,HEX, STYLE 1 NUT,1 NUT (S),ISO 4032 NUT,NUT GR 5 OR 6,BLACKOXIDE & LIGHT OILED NUT,WITH NUT SCREWED ONNA00984BOLT ASSEMBLY MACHINE; M12 X 1.75 X 40 MM,HEX HEAD,SS,ISO 3506OR ASTM F738M BOLT,BOLT GR A2-70 (TYPE 304),COLD WORKED BOLT,12MM DIA,40 MM LG,1.75 MM PITCH THD,ISO METRIC COARSE-6G/6H THDSER,FULL THD LG,ISO 4017 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO3506 OR ASTM F836M NUT,NUT GR A2-70 (TYPE 304),COLD WORKEDNUT,ISO 4032 NUT,WITH NUT SCREWED ONNA00985BOLT MACHINE; M14 X 2 X 30 MM,HEX HEAD,CS,ISO 4017,GR 5.6,BLACKOXIDE & OILED,14 MM DIA,30 MM LG,2 MM PITCH THD,ISO METRICCOARSE-6G THD SER,FULL THD LGNA00986BOLT MACHINE; M16 X 2 X 50 MM,HEX HEAD,CS,ISO 4014,GR 5.6,BLACKOXIDE & OILED,16 MM DIA,50 MM LG,2 MM PITCH THD,ISO METRICCOARSE-6G THD SER,38 MM THD LGNA00987BOLT ASSEMBLY MACHINE; M16 X 2 X 50 MM,HEX HEAD,SS,ISO 3506 ORASTM F738M BOLT,BOLT GR A2-70 (TYPE 304),COLD WORKED BOLT,16 MMDIA,50 MM LG,2 MM PITCH THD,ISO METRIC COARSE-6G/6H THD SER,FULLTHD LG,ISO 4017 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO 3506 OR ASTMF836M NUT,NUT GR A2-70 (TYPE 304),COLD WORKED NUT,ISO 4032NUT,WITH NUT SCREWED ONNA00988BOLT ASSEMBLY MACHINE; M20 X 2.5 X 60 MM,HEX HEAD,SS,ISO 3506 ORASTM F738M BOLT,BOLT GR A2-70 (TYPE 304),COLD WORKED BOLT,20 MMDIA,60 MM LG,2.5 MM PITCH THD,ISO METRIC COARSE-6G/6H THDSER,FULL THD LG,ISO 4017 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO3506 OR ASTM F836M NUT,NUT GR A2-70 (TYPE 304),COLD WORKEDNUT,ISO 4032 NUT,WITH NUT SCREWED ON, THREAD PROTECTION REQUIREDNA00989BOLT ASSEMBLY U; ROUND BEND SHAPE,3/8-16 X 3-3/4 X 3 X 1-1/4IN,CS,ASTM A307,GR B,HOT DIP GALV,2-1/2 IN PIPE NPS,3/8 INDIA,16 THD,UNC-2A/2B THD SER,76.2 MM (3 IN) INSIDE W,95.2 MM(3-3/4 IN) INSIDE L,HEAVY HEX NUT,2 NUT (S),ASTM A563 NUT,NUT GRA,HOT DIP GALV NUT,ANSI/ASME B1.1, ANSI/ASME B18.2.2, ASTMA153,32 MM (1-1/4 IN) THREAD LENGTH, WITH NUTS SCREWED-ON,PPACKING CODE 844421 APPIES.NA00990BOLT ASSEMBLY U; ROUND BEND SHAPE,3/4-10 X 16-1/2 X 8-3/4 X8-1/2 IN,SS,ASTM F593, GR 3 CW,GR TYPE 321,NATURAL,8 IN PIPENPS,3/4 IN DIA,10 THD,UNC-2A/2B THD SER,222 MM (8-3/4 IN) INSIDEW,419 MM (16-1/2 IN) INSIDE L,HEX NUT,4 NUT (S),ASTM F594 GR 3CW NUT,NUT GR TYPE 321,NATURAL NUT,ANSI/ASME B1.1, ANSI/ASMEB18.2.2, ANSI/ASME B8.22.1,WITH NUTS & 2 SS TYPE 321 WASHERSSCREWED ON, 216 MM (8-1/2 IN) THREAD LENGTH, PACKING CODE 844421APPLIES.NA00991BOLT ASSEMBLY U; ROUND BEND SHAPE,3/4-10 X 16-1/2 X 6-3/4 X9-1/2 IN,SS,ASTM F593 GR 3 CW,GR TYPE 321,NATURAL,6 IN PIPENPS,3/4 IN DIA,10 THD,UNC-2A/2B THD SER,171 MM (6-3/4 IN) INSIDEW,419 MM (16-1/2 IN) INSIDE L,HEX NUT,4 NUT (S),ASTM F594 GR 3CW NUT,NUT GR TYPE 321,NATURAL NUT,ANSI/ASME B1.1, ANSI/ASMEB18.2.2, ANSI/ASME B18.22.1,WITH NUTS & 2 SS TYPE 321 WASHERSSCREWED ON, 241 MM (9-1/2 IN) THREAD LENGTH. PACKING CODE 844421APPLIES.NA01017BOLT MACHINE; 1/4-28 X 1 IN,HEX HEAD,ALLOY STEEL,SAE J429,GR8,BLACK OXIDE & OILED,1/4 IN DIA,25.4 MM (1 IN) LG,28 THD,UNF-2ATHD SER,19.1 MM (3/4 IN) THD LG,ANSI/ASME B18.2.1NA01018BOLT MACHINE; 5/16-24 X 1 IN,HEX HEAD,ALLOY STEEL,SAE J429,GR8,BLACK OXIDE & OILED,5/16 IN DIA,25.4 MM (1 IN) LG,24THD,UNF-2A THD SER,22.2 MM (7/8 IN) THD LG,ANSI/ASME B18.2.1NA01019BOLT MACHINE; 3/8-24 X 1 IN,HEX HEAD,ALLOY STEEL,SAE J429,GR8,BLACK OXIDE & OILED,3/8 IN DIA,25.4 MM (1 IN) LG,24 THD,UNF-2ATHD SER,FULL THD LG,ANSI/ASME B18.2.1NA01020BOLT MACHINE; 1/2-20 X 1 IN,HEX HEAD,ALLOY STEEL,SAE J429,GR8,BLACK OXIDE & OILED,1/2 IN DIA DIA,25.4 MM (1 IN) LG,20THD,UNF-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1NA01021BOLT MACHINE; 5/16-24 X 2 IN,HEX HEAD,ALLOY STEEL,SAE J429,GR8,BLACK OXIDE & OILED,5/16 IN DIA,50.8 MM (2 IN) LG,24THD,UNF-2A THD SER,22.2 MM (7/8 IN) THD LG,ANSI/ASME B18.2.1NA01022BOLT MACHINE; 3/8-24 X 2 IN,HEX HEAD,ALLOY STEEL,SAE J429,GR8,BLACK OXIDE & OILED,3/8 IN DIA,50.8 MM (2 IN) LG,24 THD,UNF-2ATHD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA01023BOLT MACHINE; 1/2-20 X 2 IN,HEX HEAD,ALLOY STEEL,SAE J429,GR8,BLACK OXIDE & OILED,1/2 IN DIA,50.8 MM (2 IN) LG,20 THD,UNF-2ATHD SER,31.8 MM (1-1/4 IN) THD LG,ANSI/ASME B18.2.1NA01024BOLT MACHINE; 5/16-24 X 3 IN,HEX HEAD,ALLOY STEEL,SAE J429,GR8,PHOSPHATED & OILED,5/16 IN DIA,76.2 MM (3 IN) LG,24 THD,UNF-2ATHD SER,FULL THD LG,ANSI/ASME B18.2.1NA01025BOLT MACHINE; 3/8-24 X 3 IN,HEX HEAD,ALLOY STEEL,SAE J429,GR8,BLACK OXIDE & OILED,3/8 IN DIA,76.2 MM (3 IN) LG,24 THD,UNF-2ATHD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA01026BOLT MACHINE; M6 X 1 X 20 MM,HEX HEAD,ALLOY STEEL,ISO 4017,GR10.9,PHOSPHATED & OILED,6 MM DIA,20 MM LG,1 MM PITCH THD,ISOMETRIC COARSE-6G THD SER,FULL THD LGNA01027BOLT MACHINE; M6 X 1 X 30 MM,HEX HEAD,CS,ISO 4014,GR 8.8,BLACKOXIDE & OILED,6 MM DIA,30 MM LG,1 MM PITCH THD,ISO METRICCOARSE-6G THD SER,18 MM THD LGNA01028BOLT MACHINE; M12 X 1.75 X 25 MM,HEX HEAD,ALLOY STEEL,ISO4017,GR 10.9,BLACK OXIDE & OILED,12 MM DIA,25 MM LG,1.75 MMPITCH THD,ISO METRIC COARSE-6G THD SER,25 MM THD LGNA01029BOLT MACHINE; M12 X 1.75 X 50 MM,HEX HEAD,ALLOY STEEL,ISO4014,GR 10.9,PHOSPHATED & OILED,12 MM DIA,50 MM LG,1.75 MM PITCHTHD,ISO METRIC COARSE-6G THD SER,30 MM THD LGNA01032BOLT MACHINE; 7/8-9 X 3 IN,HEX HEAD,SS,ASTM A193,GR TYPE 310,7/8IN DIA,76.2 MM (3 IN) LG,9 THD,BOLT UNC-2A / NUT UNC-2B THDSER,FULL THD LG,CHAMFERED ENDNA01049BOLT ASSEMBLY MACHINE; 3/4-10 X 3-1/2 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316,CONDITION CW2 BOLT,3/4 IN DIA,88.9 MM(3-1/2 IN) LG,10 THD,UNC-2A/2B THD SER,44.5 MM (1-3/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594NUT,NUT GR TYPE 316,CONDITION CW2 NUT,ANSI/ASME B18.2.2 NUT,WITHNUT SCREWED ONNA01050BOLT ASSEMBLY MACHINE; 3/4-10 X 3-1/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316,CONDITION CW2 BOLT,3/4 IN DIA,82.5 MM(3-1/4 IN) LG,10 THD,UNC-2A/2B THD SER,44.5 MM (1-3/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594NUT,NUT GR TYPE 316,CONDITION CW2 NUT,ANSI/ASME B18.2.2 NUT,WITHNUT SCREWED ONNA01051BOLT ASSEMBLY MACHINE; 5/8-11 X 3-1/2 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316,CONDITION CW1 BOLT,5/8 IN DIA,88.9 MM(3-1/2 IN) LG,11 THD,UNC-2A/2B THD SER,38.1 MM (1-1/2 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594NUT,NUT GR TYPE 316,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITHNUT SCREWED ONNA01052BOLT ASSEMBLY MACHINE; 5/8-11 X 2-1/2 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316,CONDITION CW1 BOLT,5/8 IN DIA,63.5 MM(2-1/2 IN) LG,11 THD,UNC-2A/2B THD SER,38.1 MM (1-1/2 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEAVT HEX NUT,1 NUT (S),ASTM F594NUT,NUT GR TYPE 316,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITHNUT SCREWED ONNA01053BOLT ASSEMBLY MACHINE; 7/8-9 X 3-3/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316,CONDITION CW2 BOLT,7/8 IN DIA,95.2 MM(3-3/4 IN) LG,9 THD,UNC-2A/2B THD SER,50.8 MM (2 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F593NUT,NUT GR TYPE 316,CONDITION CW2 NUT,ANSI/ASME B18.2.2 NUT,WITHNUT SCREWED ON, THREAD PROTECTION REQUIREDNA01054BOLT ASSEMBLY MACHINE; 1/2-13 X 2-3/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316,CONDITION CW1 BOLT,1/2 IN DIA,69.6 MM(2-3/4 IN) LG,13 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594NUT,NUT GR TYPE 316,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITHNUT SCREWED ONNA01058BOLT ASSEMBLY U; ROUND BEND SHAPE,1/2-13 X 7-3/4 X 5-5/8 X 1-3/8IN,SS,ASTM F593,GR TYPE 310,NATURAL,5 IN PIPE NPS,1/2 IN DIA,13THD,UNC-2A/2B THD SER,143 MM (5-5/8 IN) INSIDE W,197 MM (7-3/4IN) INSIDE L,HEX NUT,4 NUT (S),ASTM F594 NUT,NUT GR TYPE310,NATURAL NUT,ANSI/ASME B1.1, ANSI/ASME B18.2.2, ANSI/ASMEB18.22.1,WITH NUTS & 2 SS TYPE 3XX WASHERS SCREWED ON, BOLTTENSILE STRENGTH 80 KSI MIN, 0.2 PERCENT YIELD STRENGTH 50 KSIMIN, BOLT/NUT HARDNESS HRB 83 TO HRC 28, 35 MM (1-3/8 IN) THREADLENGTH, PACKING CODE APPLIES.NA01059BOLT MACHINE; M8 X 1.25 X 20 MM,HEX HEAD,ALLOY STEEL,ISO 4017,GR10.9,PHOSPHATED & OILED,8 MM DIA,20 MM LG,1.25 MM PITCH THD,ISOMETRIC COARSE-6G THD SER,FULL THD LGNA01060BOLT ASSEMBLY MACHINE; M12 X 1.75 X 30 MM,HEX HEAD,ALLOYSTEEL,ISO 4017 BOLT,BOLT GR 10.9,PHOSPHATED & LIGHT OILEDBOLT,12 MM DIA,30 MM LG,1.75 MM PITCH THD,ISO METRICCOARSE-6G/6H THD SER,FULL THD LG,HEX, STYLE 1 NUT,1 NUT (S),ISO4032 NUT,NUT GR 10,PHOSPHATED & LIGHT OILED NUT,WITH NUT SCREWEDONNA01061BOLT ASSEMBLY MACHINE; M12 1.75 X 45 MM,HEX HEAD,ALLOY STEEL,ISO4017 BOLT,BOLT GR 10.9,PHOSPHATED & LIGHT OILED BOLT,12 MMDIA,45 MM LG,1.75 MM PITCH THD,ISO METRIC COARSE-6G/6H THDSER,FULL THD LG,HEX, STYLE 1 NUT,1 NUT (S),ISO 4032 NUT,NUT GR10,PHOSPHATED & LIGHT OILED NUT,WITH NUT SCREWED ONNA01062BOLT ASSEMBLY MACHINE; M12 X 1.75 X 65 MM,HEX HEAD,ALLOYSTEEL,ISO 4014 BOLT,BOLT GR 10.9,PHOSPHATED & LIGHT OILEDBOLT,12 MM DIA,65 MM LG,1.75 MM PITCH THD,ISO METRICCOARSE-6G/6H THD SER,30 MM THD LG,HEX, STYLE 1 NUT,1 NUT (S),ISO4032 NUT,NUT GR 10,PHOSPHATED & LIGHT OILED NUT,WITH NUT SCREWEDONNA01063BOLT MACHINE; M10 X 1.5 X 20 MM,HEX HEAD,ALLOY STEEL,ISO 4017,GR10.9,PHOSPHATED & OILED,10 MM DIA,20 MM LG,1.5 MM PITCH THD,ISOMETRIC COARSE-6G THD SER,FULL THD LGNA01067BOLT MACHINE; M12 X 1.75 X 25 MM,HEX HEAD,SS,ISO 3506 OR ASTMF738M,GR A2-70 (TYPE 304),12 MM DIA,25 MM LG,1.75 MM PITCHTHD,ISO METRIC COARSE-6G THD SER,FULL THD LG,ISO 4017NA01068BOLT MACHINE; M12 X 1.75 X 30 MM,HEX HEAD,SS,ISO 3506 OR ASTMF738M,GR A2-70 (TYPE 304),12 MM DIA,30 MM LG,1.75 MM PITCHTHD,ISO METRIC COARSE-6G THD SER,FULL THD LG,ISO 4017NA01070BOLT MACHINE; M16 X 2 X 110 MM,HEX HEAD,CS,ASTM A193M,GRB7,PHOSPHATED & OILED,M16 DIA,110 MM LG,2 MM PITCH THD,ISOMETRIC COARSE-6G THD SER,FULL THD LG,JACK SCREW, WITH PLAINPORTION 12 MM DIA X 15 MM LONG AT END OF SCREWNA01071BOLT MACHINE; M10 X 1.5 X 30 MM,HEX HEAD,SS,ISO 3506 OR ASTMF378M,GR A2-70 (TYPE 304),10 MM DIA,30 MM LG,1.5 MM PITCHTHD,ISO METRIC COARSE-6G THD SER,26 MM THD LG,ISO 4014NA01169BOLT TOGGLE; 6-32 X 2 IN,ROUND HEAD,CS,ASTM A307,GR A,ZINCELECTRO-PLATED & CHROMATED,0.1372 IN DIA,2 IN LG,3/8 IN DRILL,32THD,UNC-2A THD SER,ANSI/ASME B1.1,SPRING WINGS, SNAP IN, PACKINGSPEC 8444-21 APPLIES.NA01170BOLT EYE; SHOULDER PATTERN,3/8-16 X 1-1/4 IN,CS,ASTM A489,DROPFORGED, BLACK,3/8 IN DIA,25.4 MM (1 IN) ID EYE,16 THD,UNC-2A THDSER,22.2 MM (7/8 IN) THD LG,31.8 MM (1-1/4 IN) SHANK LG,7.9 MM(5/16 IN) CROSS EY,0.45 METRIC TON (1000 LB) SUPPLY,ANSI/ASMEB18.15NA01183BOLT ASSEMBLY U; ROUND BEND SHAPE,5/16-18 X 2-11/16 X 1-3/4 X1-1/8 IN,CS,ASTM A307,GR B,HOT DIP GALV,1-1/4 IN PIPE NPS,5/16IN DIA,18 THD,UNC 2A/2B THD SER,44.5 MM (1-3/4 IN) INSIDE W,68MM (2-11/16 IN) INSIDE L,HEAVY HEX NUT,2 NUT (S),ASTM A563NA01184BOLT ASSEMBLY U; ROUND BEND SHAPE,3/4-10 X 11-1/2 X 8-3/4 X3-3/4 IN,CS,ASTM A307,GR B,HOT DIP GALV,8 IN PIPE NPS,3/4 INDIA,10 THD,UNC-2A/2B THD SER,222 MM (8-3/4 IN) INSIDE W,292 MM(11-1/2 IN) INSIDE L,HEAVY HEX NUT,2 NUT (S),ASTM A563 NUT,NUTGR A,HOT DIP GALV NUT,51 MM (2 IN) WD X 343 MM (13-1/2 IN) LG X4.4-6.35 MM (0.175-0.25 IN) THK WITH TWO 7/8-IN DIA HOLESCENTEREDPLATE,CS PLATE,ANSI/ASME B1.1, ANSI/ASME B18.2.2,ANSI/ASME B18.22.1, ASTM A153,95 MM (3-3/4 IN) THREAD LENGTH,ASSEMBLED WITH PLATE, 2 NUTS & 2 PLAIN WASHERS, PACKING CODE844421 APPLIES.NA01188BOLT ASSEMBLY MACHINE; 1/4-20 X 1 IN,HEX HEAD,ALLOY STEEL,ASTMA193 BOLT,BOLT GR B7,QUENCHED & TEMPERED & LIGHT OILED BOLT,1/4IN DIA,25.4 MM (1 IN) LG,20 THD,UNC-2A/2B THD SER,19.1 MM (3/4IN) THD LG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A563NUT,NUT GR B,BLACK & LIGHT OILED NUT,ANSI/ASME B18.2.2 NUT,WITHNUT SCREWED ONNA01189BOLT ASSEMBLY MACHINE; 3/8-16 X 2-1/2 IN,HEX HEAD,ALLOYSTEEL,ASTM A193 BOLT,BOLT GR B7,QUENCHED & TEMPERED & LIGHTOILED BOLT,3/8 IN DIA,63.5 MM (2-1/2 IN) LG,16 THD,UNC-2A/2B THDSER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT(S),ASTM A563 NUT,NUT GR B,BLACK & LIGHT OILED NUT,ANSI/ASMEB18.2.2 NUT,WITH NUT SCREWED ONNA01190BOLT ASSEMBLY MACHINE; M5 X 0.8 X 40 MM,HEX HEAD,SS,ISO 3506 ORASTM F738M BOLT,BOLT GR A4-70 (TYPE 316),COLD WORKED BOLT,5 MMDIA,40 MM LG,0.8 MM PITCH THD,ISO METRIC COARSE-6G/6H THD SER,16MM THD LG,ISO 4014 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO 3506 ORASTM F836M NUT,NUT GR A4-70 (TYPE 316),COLD WORKED NUT,ISO 4032NUT,WITH NUT SCREWED ONNA01191BOLT ASSEMBLY MACHINE; M8 X 1.25 X 60 MM,HEX HEAD,SS,ISO 3506 ORASTM F738M BOLT,BOLT GR A4-70 (TYPE 316),COLD WORKED BOLT,8 MMDIA,60 MM LG,1.25 MM PITCH THD,ISO METRIC COARSE-6G/6H THDSER,22 MM THD LG,ISO 4014 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO3506 OR ASTM F836M NUT,NUT GR A4-70 (TYPE 316),COLD WORKEDNUT,ISO 4032 NUT,WITH NUT SCREWED ONNA01192BOLT ASSEMBLY MACHINE; M12 X 1.75 X 80 MM,HEX HEAD,SS,ISO 3506OR ASTM F738M BOLT,BOLT GR A4-70 (TYPE 316),COLD WORKED BOLT,12MM DIA,80 MM LG,1.5 MM PITCH THD,ISO METRIC COARSE-6G/6H THDSER,30 MM THD LG,ISO 4014 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO3506 OR ASTM F836M NUT,NUT GR A4-70 (TYPE 316),COLD WORKEDNUT,ISO 4032 NUT,WITH NUT SCREWED ONNA01193BOLT ASSEMBLY MACHINE; M14 X 2 X 50 MM,HEX HEAD,SS,ISO 3506 ORASTM F738M BOLT,BOLT GR A4-70 (TYPE 316),COLD WORKED BOLT,14 MMDIA,50 MM LG,2 MM PITCH THD,ISO METRIC COARSE-6G/6H THD SER,FULLTHD LG,ISO 4017 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO 3506 OR ASTMF836M NUT,NUT GR A4-70 (TYPE 316),COLD WORKED NUT,ISO 4032NUT,WITH NUT SCREWED ONNA01194BOLT ASSEMBLY MACHINE; M14 X 2 X 80 MM,HEX HEAD,SS,ISO 3506 ORASTM F738M BOLT,BOLT GR A4-70 (TYPE 316),COLD WORKED BOLT,14 MMDIA,80 MM LG,2 MM PITCH THD,ISO METRIC COARSE-6G/6H THD SER,34MM THD LG,ISO 4014 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO 3506 ORASTM F836M NUT,NUT GR A4-70 (TYPE 316),COLD WORKED NUT,ISO 4032NUT,WITH NUT SCREWED ONNA01195BOLT ASSEMBLY MACHINE; M16 X 2 X 80 MM,HEX HEAD,SS,ISO 3506 ORASTM F738M BOLT,BOLT GR A4-70 (TYPE 316),COLD WORKED BOLT,16 MMDIA,80 MM LG,2 MM PITCH THD,ISO METRIC COARSE-6G/6H THD SER,38MM THD LG,ISO 4014 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO 3506 ORASTM F836M NUT,NUT GR A4-70 (TYPE 316),COLD WORKED NUT,ISO 4032NUT,WITH NUT SCREWED ONNA01196BOLT ASSEMBLY MACHINE; M10 X 0.75 X 30 MM,HEX HEAD,SS,ISO 3506OR ASTM F738M BOLT,BOLT GR A4-70 (TYPE 316),COLD WORKED BOLT,10MM DIA,30 MM LG,0.75 MM PITCH THD,ISO METRIC COARSE-6G/6H THDSER,FULL THD LG,ISO 4017 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO3506 OR ASTM F836M NUT,NUT GR A4-70 (TYPE 316),COLD WORKEDNUT,ISO 4032 NUT,WITH NUT SCREWED ONNA01197BOLT ASSEMBLY MACHINE; M8 X 1.25 X 30 MM,HEX HEAD,SS,ISO 3506 ORASTM F738M BOLT,BOLT GR A4-70 (TYPE 316),COLD WORKED BOLT,8 MMDIA,30 MM LG,1.25 MM PITCH THD,ISO METRIC COARSE-6G/6H THDSER,FULL THD LG,ISO 4017 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO3506 OR ASTM F836M NUT,NUT GR A4-70 (TYPE 316),COLD WORKEDNUT,ISO 4032 NUT,WITH NUT SCREWED ONNA01199BOLT ASSEMBLY MACHINE; 3/8-16 X 1-3/8 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 410,CONDITION H BOLT,3/8 IN DIA,34.9 MM (1-3/8IN) LG,16 THD,UNC-2A/2B THD SER,25.4 MM (1 IN) THD LG,ANSI/ASMEB18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GR TYPE410,CONDITION H NUT,ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA01205BOLT MACHINE; 3/8-16 X 1 IN,HEX HEAD,SS,ASTM F593,GR UNS S41000(TYPE 410),CONDITION H,3/8 IN DIA,25.4 MM (1 IN) LG,16THD,UNC-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1NA01210BOLT MACHINE; 5/16-18 X 3/4 IN,HEX HEAD,SS,ASTM F593,GR UNSS41000 (TYPE 410),CONDITION H,5/16 IN DIA,19.1 MM (3/4 IN) LG,18THD,UNC-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1NA01211BOLT MACHINE; 3/4-10 X 1-1/2 IN,HEX HEAD,SS,ASTM F593,GR UNSS41000 (TYPE 410),CONDITION H,3/4 IN DIA,38.1 MM (1-1/2 IN)LG,10 THD,UNC-2A THD SER,FULL THD LG,ANSI/ASME B18.2.1NA01212BOLT MACHINE; 3/8-16 X 2 IN,HEX HEAD,SS,ASTM F593,GR UNS S41000(TYPE 410),CONDITION H,3/8 IN DIA,50.8 MM (2 IN) LG,16THD,UNC-2A THD SER,25.4 MM (1 IN) THD LG,ANSI/ASME B18.2.1NA01213BOLT ASSEMBLY MACHINE; 1/2-13 X 1-1/2 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 410,CONDITION H BOLT,1/2 IN DIA,38.1 MM (1-1/2IN) LG,13 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GRTYPE 410,CONDITION H NUT,ANSI/ASME B18.2.2 NUT,WITH NUT SCREWEDON PACKING SPEC APPLIES 831403NA01214BOLT ASSEMBLY MACHINE; 5/8-11 X 2-3/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316,CONDITION CW1 BOLT,5/8 IN DIA,69.9 MM(2-3/4 IN) LG,11 THD,UNC-2A/2B THD SER,38.1 MM (1-1/2 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594NUT,NUT GR TYPE 316,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITHNUT SCREWED ON PACKING SPEC APPLIES 831403NA01215BOLT ASSEMBLY MACHINE; 5/8-11 X 3-1/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 316,CONDITION CW1 BOLT,5/8 IN DIA,82.6 MM(3-1/4 IN) LG,11 THD,UNC-2A/2B THD SER,38.1 MM (1-1/2 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F594NUT,NUT GR TYPE 316,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITHNUT SCREWED ON PACKING SPEC APPLIES 831403NA01216BOLT ASSEMBLY MACHINE; 3/4-10 X 1-3/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 410,CONDITION H BOLT,3/4 IN DIA,44.5 MM (1-3/4IN) LG,10 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI/ASME B18.2.1BOLT,HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GR TYPE 410,CONDITION HNUT,ANSI/ASME B18.2.2 NUT,ANSI B1.1,WITH NUT SCREWED ON PACKINGSPEC APPLIES 831403NA01217BOLT ASSEMBLY MACHINE; 1/4-20 X 3/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 304,CONDITION CW1 BOLT,1/4 IN DIA,19.1 MM (3/4IN) LG,20 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI/ASME B18.2.1BOLT,HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GR TYPE 304,CONDITIONCW1 NUT,ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ON PACKING SPECAPPLIES 831403NA01218BOLT ASSEMBLY MACHINE; 1/2-13 X 1-1/2 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 304,CONDITION CW1 BOLT,1/2 IN DIA,38.1 MM(1-1/2 IN) LG,13 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GRTYPE 304,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITH NUTSCREWED ON PACKING SPEC APPLIES 831403NA01219BOLT ASSEMBLY MACHINE; 1/2-13 X 4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 304,CONDITION CW1 BOLT,1/2 IN DIA,101.6 MM (4IN) LG,13 THD,UNC-2A/2B THD SER,31.8 MM (1-1/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GRTYPE 304,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITH NUTSCREWED ON PACKING SPEC APPLIES 831403NA01220BOLT ASSEMBLY MACHINE; 1/2-13 X 9-1/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 304,CONDITION CW1 BOLT,1/2 IN DIA,235 MM(9-1/4 IN) LG,13 THD,UNC-2A/2B THD SER,38.1 MM (1-1/2 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GRTYPE 304,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITH NUTSCREWED ON PACKING SPEC APPLIES 831403NA01221BOLT ASSEMBLY MACHINE; 5/8-11 X 1-1/4 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 304,CONDITION CW1 BOLT,5/8 IN DIA,31.8 MM(1-1/4 IN) LG,11 THD,UNC-2A/2B THD SER,FULL THD LG,ANSI/ASMEB18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GR TYPE304,CONDITION CW1 NUT,ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONPACKING SPEC APPLIES 831403NA0122201223BOLT ASSEMBLY MACHINE; 3/4-10 X 2-1/2 IN,HEX HEAD,SS,ASTM F593BOLT,BOLT GR TYPE 304,CONDITION CW2 BOLT,3/4 IN DIA,63.5 MM(2-1/2 IN) LG,10 THD,UNC-2A/2B THD SER,44.5 (1-3/4 IN) THDLG,ANSI/ASME B18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM F594 NUT,NUT GRTYPE 304,CONDITION CW2 NUT,ANSI/ASME B18.2.2 NUT,WITH NUTSCREWED ON PACKING SPEC APPLIES 831403STUD ASSEMBLY CONTINUOUS THREAD; 3/8-16 X 2-1/2 IN,K-MONEL,ASTMF468 STUD,STUD GR UNS N05500 (ALLOY 500),3/8 IN DIA,16THD,UNC-2A/2B THD SER,63.5 MM (2-1/2 IN) LG,ANSI/ASME B1.1STUD,HEAVY HEX NUT,2 NUT (S),ASTM F467 NUT,NUT GR UNS N04400(ALLOY 400),ANSI/ASME B18.2.2 NUT,WITH NUTS SCREWED ON,CHAMFERED ENDS, 24 TO 35 HRC STUD, 75 MIN HRB NUT, PACKING SPECCODE 8444-21 APPLIESNANA01227BOLT ASSEMBLY U; ROUND BEND SHAPE,3/8-16 X 3-1/2 X 2-1/2 X 1-1/4IN,SS,ASTM F593,GR TYPE 304,CONDITION CW1,2 IN PIPE NPS,3/8 INDIA,16 THD,UNC-2A/2B THD SER,63.5 MM (2-1/2 IN) INSIDE W,88.9 MM(3-1/2 IN) INSIDE L,HEX NUT,4 NUT (S),ASTM F594 NUT,NUT GR TYPE304,CONDITION CW1 NUT,ANSI/ASME B1.1, ANSI/ASME B18.2.2,WITHNUTS & 2 TYPE 304 SS WASHERS, SCREWED ON, 31.8 MM (1-1/4 IN) THDLGNA01228BOLT ASSEMBLY U; ROUND BEND SHAPE,3/8-16 X 4 IN,SS,ASTM A193,GRB6 AISI TYPE 410,51.8(2 IN) PIPE NPS,3/8 DIA,16 THD,UNC-2A/2BTHD SER,65 MM (2.5384 IN) INSIDE W,100 MM (4 IN) INSIDE L,HEAVYHEX NUT,2 NUT (S),ASTM A194 NUT,NUT GR 6, AISI TYPE410,ANSI/ASME B1.1,WITH (2) NUTS SCREWED-ONNA01229BOLT ASSEMBLY; HOOK, ROUND BEND TYPE,5/16-18 X 6 IN,CARBONSTEEL,GALVANIZED BOLT,5/16 IN DIA,150 MM (6 IN) LG,18 TPITHD,UNC THD SER,1-5/8 IN THD LG,ANSI B18.2.2 BOLT,HEX NUT,1 NUT(S),GALVANIZED NUT,ANSI B1.1,WITH FLAT WASHER 8 MM ID X 23 MM ODX 1.5 MM THK, FOR 60 MM PIPENA02677BOLT STOVE; M16 X 2 PITCH X 25 MM,ROUND HEAD,CS,DIN 1710,GALV,16MM DIA,25 MM LG,2 MM PITCH THD,FULL THD LG,DIN 1710,DIN1710/ISO,FOR BEAM TYPE GUARD RAIL, NIBBED NECK, 4-6-2 STEEL,EQUAL TO A NEHER GMBH DWG NO 0355A ITEM ANA02678BOLT STOVE; M16 X 2 PITCH X 45 MM,ROUND HEAD,CS,DIN 1710,GALV,16MM DIA,45 MM LG,2 MM PITCH THD,38 MM THD LG,DIN 1710,ISO,FORBEAM TYPE GUARD RAIL, NIBBED NECK, 4-6-2 STEEL, EQUAL TO A NEHERGMBH DWG NO NA-0355A ITEM BNA02679BOLT STOVE; M16 X 2 PITCH X 60 MM,ROUND HEAD,CS,DIN 1710,GALV,16MM DIA,60 MM LG,2 MM PITCH THD,38 MM THD LG,DIN 1710,DIN1710,FOR BEAM TYPE GUARD RAIL, NIBBED NECK, 4-6-2 STEEEL, EQUALTO A NEHER GMBH DWG NO NA-0355A ITEM CNA02680BOLT MACHINE; 1-8 X 4.2 IN LG,TWELVE POINT HEAD,PARTLY THREADEDBODY,STEEL,BLACK,1 IN DIA,4.2 IN LG,8 THD,UNC THD SER,78 MM THDLG,ANSI B18.2.1NA02681BOLT ASSEMBLY MACHINE; M24 X 3 X 100 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,24 MM DIA,100 MM LG,3 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,100 MM THD LG,ISO 4017BOLT,THICK HEX NUT,1 NUT (S),NUT GR 9,NATURAL, LIGHT OILEDNUT,ISO 4033 NUT,WITH NUT AND PLAIN WASHERS, FULLY THREADED, DIN933NA02682BOLT ASSEMBLY MACHINE; 1/8-30 X 30 MM,FLAT PHILIPS HEAD,SS,FULLBODY,18-8 BOLT,BOLT GR AISI 420,BRIGHT BOLT,1/8 IN DIA,30 MMLG,30 THD,UNC THD SER,FULL THD LG,ANSI B18.2.1 BOLT,HEAVY HEXNUT,1 NUT (S),NUT GR 2 H,BRIGHT NUT,ANSI B 18.2.2 NUT,COMPLETEWITH NUTSNA02683BOLT ASSEMBLY MACHINE; 7/8 IN -9 X 102 MM,HEX HEAD,ALLOYSTEEL,PARTLY THREADED BODY,ASTM A193 BOLT,BOLT GR B7,BLACKBOLT,7/8 IN DIA,102 MM LG,9 THD,UNC-2A/2B THD SER,50 MM THDLG,ANSI B18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),BLACK NUT,ANSIB18.2.2 NUTNA02686BOLT MACHINE; M12 X 1.5 X 43 MM,HEX HEAD,PARTLY THREADEDBODY,CARBON STEEL,ASTM A193,GR B7,CADMIUM PLATED,12 MM DIA,43 MMLG,1.5 MM PITCH THD,METRIC FINE THD SER,22 MM THD LG,ANSIB18.2.1,FITTEDNA02687BOLT MACHINE; M10 X 1.25 X 35 MM,HEX HEAD,PARTLY THREADEDBODY,CARBON STEEL,ASTM A193,GR B7,CADMIUM PLATED,10 MM DIA,35 MMLG,1.25 MM THD,METRIC COARSE THD SER,16 MM THD LG,ANSI B18.2.1NA02688BOLT ASSEMBLY U; ROUND BEND SHAPE,3/8 -16 X 3-5/8 IN,CARBONSTEEL,ASTM A307,GR B,GALV,3/8 IN DIA,16 THD,UNC THD SER,3 ININSIDE W,3-1/16 IN INSIDE L,HEX NUT,2 NUT (S),ASTM A108 NUT,NUTGR 1215 CF,GALV NUT,WITH WASHERS & NUT SCREWED-ONNA02695BOLT U; ROUND BEND SHAPE,M5 X 0.8,CARBON STEEL,ASTM A307 GRA,GALV,5 MM DIA,0.8 MM PITCH THD,METRIC COARSE THD SER,39 MM THDLG,55 MM INSIDE W,75 MM INSIDE L,COMPLETE WITH NUTSNA02696BOLT ASSEMBLY MACHINE; M4 X 0.7 X 50 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,4 MM DIA,50 MM LG,0.7 MM PITCHTHD,ISO METRIC COARSE - 6G/6H THD SER,50 MM THD LG,ISO 4017BOLT,HEX NUT,1 NUT (S),NUT GR 8,NATURAL, LIGHT OILED NUT,ISO4032 NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN 933NA02697BOLT ASSEMBLY MACHINE; 1/4-20 X 1/2 IN,HEX HEAD,BRASS,ASTM F468UNS C27000 OR EQUAL BOLT,NATURAL BOLT,1/4 IN DIA,12.7 MM (1/2IN) LG,20 TPI THD,UNC-2A/2B THD SER,FULL (1/2 IN) THD LG,ANSIB18.2.1 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM F467 UNS C27000 OREQUAL NUT,NATURAL NUT,ANSI B18.2.2 NUT,WITH 1 NUT AND 2 FLATWASHERS, NPT FULL THREADNA02698BOLT MACHINE; M16 X 2 X 105 MM,HEX HEAD,PARTLY THREADEDBODY,SS,ASTM A182,GR A 4.70,NATURAL,16 MM DIA,105 MM LG,2 MMPITCH THD,METRIC COARSE THD SER,35 MM THD LG,ANSIB18.2.1,WITHOUT NUT, FOR FILTRATION UNIT SWI SYSTEMNA02705BOLT ASSEMBLY MACHINE; 5/8-11 X 20 MM (13/16 IN),HEX HEAD,ALLOYSTEEL,FULL BODY,ASTM A193 BOLT,BOLT GR B7,PAINT COATED (BLACK)BOLT,5/8 IN DIA,20 MM LG,11 THD,UNC THD SER,20 MM (13/16 IN) THDLG,HEAVY HEX NUT,1 NUT (S),PAINT COATED NUTNA02706BOLT MACHINE; 16 MM X 2 X 62 MM LG,HEX HEAD,PARTLY THREADEDBODY,STEEL,NATURAL,16 MM DIA,62 MM LG,2 MM PITCH THD,UNC THDSER,53 MM THD LG,ANSI B18.2.1NA02707BOLT ASSEMBLY MACHINE; HEX SOCKET HEAD,STEEL,BLACK BOLT,8 MMDIA,30 MM LG,1.25 MM THD,M8 THD SER,FULL THD LG,ANSI B18.2.1BOLT,HEX NUT,ONE NUT (S),NATURAL NUT,ANSI B.18.2.2 NUT,FOR STEAMTRAP 3/4 IN HM 3438NA02710BOLT ASSEMBLY U; ROUND BEND SHAPE,3/8-16 X 2.5 IN,STEEL,ELECTROPLATED,4 IN NPS,3/8 IN DIA,16 THD,132 MM INSIDE W,195 MM INSIDEL,HEAVY HEX NUT,2 NUT (S),ELECTROPLATED NUT,COMES WITH NUT ANDWASHERS (2 NOS. EACH) PACKING SPEC 8444-21 APPLIESNA02711BOLT ASSEMBLY MACHINE; M12 X 1.75 X 33MM,HEX HEAD,STEEL,BOLT GR8.8,BLACK BOLT,12 MM DIA,55 MM LG,1.75 MM PITCH THD,33 MM THDLG,ANSI B1.1.2A BOLT,HEX NUT,1 NUT (S),NUT GR 15-21,BLACKNUT,ANSI B1.1.2B NUT,FOR 50 MM (2 IN) SIGHT GLASS, CK 32/C, DWGNO SG400E ITEM 5NA02712BOLT ASSEMBLY MACHINE; M8 X 1.25 X 45 MM,HEX HEAD,BRASS,ISO 8839CUZN37 OR EQUAL BOLT,NATURAL BOLT,8 MM DIA,45 MM LG,1.25 MMPITCH THD,ISO METRIC COARSE - 6G/6H THD SER,45 MM THD LG,ISO4017 BOLT,1 NUT (S),ISO 8839 CUZN37 OR EQUAL NUT,NATURAL NUT,ISO4032 NUT,WITH 1 NUT AND 2 FLAT WASHERS, NPT FULL THREAD,MATERIAL UNS C27000 W/ HARDNESS 55-80 HRF ALSO ACCEPTABLENA02715BOLT ASSEMBLY U; ROUND BEND SHAPE,M8 X 1.25 X 28MM,STEEL,ELECTRO PLATED,2 IN NPS,8 MM DIA,1.25 MM PITCH THD,62MM INSIDE W,82 MM INSIDE L,HEAVY HEX NUT,2 NUT (S),ELECTROPLATEDNUT,COMES WITH NUT AND WASHERS ( 2 WASHERS), PACKING SPEC8444-21 APPLIESNA02716BOLT ASSEMBLY MACHINE; M6 X 1 X 20 MM,HEX HEAD,SS,BOLT GR A4,AISI 316,NATURAL BOLT,M6 DIA,20 MM LG,1 MM PITCH THD,ISO METRICCOARSE - 6G/6H THD SER,18 MM THD LG,ISO 4014 BOLT,THICK HEXNUT,1 NUT (S),NUT GR A4, AISI 316,NATURAL NUT,ISO-4033 NUTNA02717BOLT ASSEMBLY MACHINE; M8 X 1.25 X 60 MM,HEX HEAD,BRASS,ISO 8839CUZN37 OR EQUAL BOLT,NATURAL BOLT,8 MM DIA,60 MM LG,1.25 MMPITCH THD,ISO METRIC COARSE - 6G/6H THD SER,60 MM THD LG,ISO4017 BOLT,HEX NUT,1 NUT (S),ISO 8839 CUZN37 OR EQUAL NUT,NATURALNUT,ISO 4032 NUT,WITH 1 NUT AND 2 FLAT WASHERS, COURSE THREAD,MATERIAL UNS C27000 W/ HARDNESS 55-80 HRF ALSO ACCEPTABLENA02718BOLT ASSEMBLY MACHINE; M18 X 2.5 X 50 MM,HEX HEAD,STEEL,BOLT GR8.8,NATURAL, LIGHT OILED BOLT,18 MM DIA,50 MM LG,2.5 MM THD,ISOMETRIC COARSE - 6G/6H THD SER,50 MM THD LG,ISO 4017 BOLT,THICKHEX NUT,1 NUT (S),NUT GR 9,NATURAL, LIGHT OILED NUT,ISO 4033NUT,WITH NUT AND PLAIN WASHER, FULLY THREADED, DIN 933NA02719BOLT ASSEMBLY MACHINE; M18 X 2.5 X 100 MM,HEX HEAD,SS,ISO 3506OR ASTM F738M BOLT,BOLT GR A4-70 (TYPE 316),COLD WORKED BOLT,18MM DIA,100 MM LG,2.5 MM PITCH THD,ISO-METRIC COARSE-6G/6H THDSER,60 MM THD LG,ISO 4014 BOLT,HEX, STYLE 1 NUT,1 NUT (S),ISO3506 OR ASTM F836M NUT,NUT GR A4-70 (TYPE316),COLD WORKEDNUT,ISO 4032 NUT,WITH NUT SCREWED ONNA02720STUD ASSEMBLY CONTINUOUS THREAD; M16 X 2 X 80 MM,ALLOYSTEEL,ASTM A193 STUD,STUD GR B7,16 MM DIA,2 MM PITCH THD,ISOCOARSE THD SER,80 MM LG,HEAVY HEX NUT,2 NUT (S),ASTM A194NUT,NUT GR 2HNA02721BOLT ASSEMBLY MACHINE; 3/8-16 X 1-1/2 IN,HEX HEAD,CS,ASTM A307BOLT,BOLT GR A,3/8 IN DIA,1-1/2 IN LG,16 THD,HEX NUT,1 NUT(S),ASTM A563 NUT,NUT GR A,ASSEMBLED WITH 2 WASHERS AS PER ASTMF436. COATED USING A CERALUME 10-04.56 PRIMER AND XYLAN COAT AT A MINIMUM. TOTAL THICKNESS OF 30 MICRONS.NA02722BOLT ASSEMBLY U; ROUND BEND SHAPE,CS,ASTM A36,4 IN PIPE NPS,3/8IN DIA,16 THD,UNC-2A/2B THD SER,15-3/4 IN INSIDE L,HEAVY HEXNUT,4 NUT (S),ASTM A194 NUT,NUT GR 2H,WITH 2 WASHERS AS PER ASTMF436. COMPLETELY COATED WITH CERALUME 10.04.56 PRIMER AND XYLAN1070 TOP COAT AT A MINIMUM TOTAL THICKNESS OF 30 MICRONS.NA02724BOLT ASSEMBLY MACHINE; M16 X 100L,HEX HEAD,SS,ASTM A193BOLT,BOLT GR B 8M,16 MM (5/8 IN) DIA,100 MM (4 IN) LG,UNC- 2A/2BTHD SER,ANSI / ASME 18.2.1 BOLT,HEX NUT,1 NUT (S),ASTM A194NUT,NUT GR 8M,ANSI / ASME B18.2.2 NUT,WITH NUT SCREWED ONNA02725BOLT ASSEMBLY MACHINE; M12 X 120L,HEX HEAD,SS,193 BOLT,BOLT GR B8AM,12 MM (0.47 IN) DIA,120 MM (4.7 IN) LG,UNC- 2A/2B THDSER,ANSI / ASME B18.2.2 BOLT,HEAVY HEX NUT,1 NUT (S),ASTM A194NUT,NUT GR 8M,ANSI/ASME B18.2.2 NUT,WITH NUT SCREWED ONNA02728BOLT ASSEMBLY EYE; SPHERICAL PATTERN,1-1/8-8 X 163.5 MM,ALLOYSTEEL,ASTM A193 BOLT,BOLT GR B7,ZINC PLATED BOLT,1-1/8 IN DIA,8THD,UNC THD SER,80 MM (3.15 IN) THD LG,163.5 MM (6.44 IN) SHANKLG,28 MM (1.1 IN) ID EYE,70 MM (2.76 IN) CROSS EY,ANSI B1.1BOLT,HEX NUT,1 NUT (S),ASTM A194 NUT,NUT GR 2H,ZINC PLATEDNUT,ANSI B1.1 NUT,NUT SCREWED ON, PACKING SPEC 8444-21 APPLIESNA02729STUD ASSEMBLY CONTINUOUS THREAD; M24 X 110 MM,ALLOY STEEL,ASTMA193 STUD,STUD GR B7,24 MM DIA,M24 THD,UNC-2A/2B THD SER,110 MMLG,ANSI B1.1 STUD,HEAVY HEX NUT,2 NUT (S),ASTM A194 NUT,NUT GR2H,ANSI B18.2.2 NUT,WITH NUTS SCREWED ON, CHAMPERED ENDS, TO BEPROTECTIVE COATED WITH ASHLAND PETROLEUM CO TECTYL 506 OR EQUAL,SHIPPING CONTAINER TO BE POLYETHYLENE FILM LINED PACKING SPEC8444-21 APPLIESNA02730BOLT ASSEMBLY MACHINE; M8 X 1.25 X 35 MM,HEX HEAD,ALLOYSTEEL,PARTLY THREADED BODY,ASTM A193 BOLT,BOLT GR B7,8 MM DIA,35MM (1-3/8 IN) LG,1.25 MM PITCH THD,25 MM THD LG,HEAVY HEX NUT,1NUT (S),ASTM A194 NUT,NUT GR 2HNA02731BOLT ASSEMBLY MACHINE; M12 X 1.75 X 50,HEX HEAD,ALLOY STEEL,ASTMA193 BOLT,BOLT GR B7,12 MM DIA,50 MM LG,1.75 MM PITCH THD,40 MMTHD LG,HEAVY HEX NUT,ASTM A194 NUT,NUT GR 2HNA02732STUD ASSEMBLY CONTINUOUS THREAD; 1/2-13 X 3 IN,INCONEL 625 ORINCOLOY 825,ASTM B446 N06625 OR ASTM B425 N08825 STUD,STUD GR1,1/2 IN DIA,13 THD,UNC-2A/2B THD SER,3 IN LG,ANSI / ASME B1.1STUD,HEAVY HEX NUT,2 NUT (S),INCONEL 625 NUT,NUT GR 1,ANSI /ASME B1.1, ANSI / ASME B18.2.2 NUTNA02733STUD ASSEMBLY CONTINUOUS THREAD; 3/8-16 X 3 IN,INCONEL 625 ORINCOLOY 825,ASTM B446 N06625 OR ASTM B425 N08825 STUD,STUD GR1,3/8 IN DIA,16 THD,UNC-2A/2B THD SER,3 IN LG,ANSI / ASME B1.1STUD,HEAVY HEX NUT,2 NUT (S),INCONEL 625 NUT,NUT GR 1,ANSI /ASME B1.1, ANSI / ASME B18.2.2 NUTNA02735STUD ASSEMBLY CONTINUOUS THREAD; M20 X 145 MM LG,CS,ASTM A193STUD,STUD GR B7M,M20 DIA,METRIC THD SER,145 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02736STUD ASSEMBLY CONTINUOUS THREAD; M20 X 125 MM LG,CS,ASTM A193STUD,STUD GR B7M,M20 DIA,METRIC THD SER,125 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02737STUD ASSEMBLY CONTINUOUS THREAD; M20 X 200 MM LG,CS,ASTM A193STUD,STUD GR B7M,M20 DIA,METRIC THD SER,200 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02738STUD ASSEMBLY CONTINUOUS THREAD; M20 X 215 MM LG,CS,ASTM A193STUD,STUD GR B7M,M20 DIA,METRIC THD SER,215 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02739STUD ASSEMBLY CONTINUOUS THREAD; M30 X 320 MM LG,CS,ASTM A193STUD,STUD GR B7M,M30 DIA,METRIC THD SER,320 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02740STUD ASSEMBLY CONTINUOUS THREAD; M36 X 410 MM LG,CS,ASTM A193STUD,STUD GR B7M,M36 DIA,METRIC THD SER,410 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02741STUD ASSEMBLY CONTINUOUS THREAD; M36 X 320 MM LG,CS,ASTM A193STUD,STUD GR B7M,M36 DIA,METRIC THD SER,320 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HMNA02742STUD ASSEMBLY CONTINUOUS THREAD; M30 X 410 MM LG,CS,ASTM A193STUD,STUD GR B7M,M30 DIA,METRIC THD SER,410 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02743STUD ASSEMBLY CONTINUOUS THREAD; M30 X 430 MM LG,CS,ASTM A193STUD,STUD GR B7M,M30 DIA,METRIC THD SER,430 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02744STUD ASSEMBLY CONTINUOUS THREAD; M36 X 470 MM LG,CS,ASTM A193STUD,STUD GR B7M,M36 DIA,METRIC THD SER,470 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02745STUD ASSEMBLY CONTINUOUS THREAD; M20 X 280 MM LG,CS,ASTM A193STUD,STUD GR B7,M20 DIA,METRIC THD SER,280 MM LG,HEAVY HEX NUT,2NUT (S),ASTM A194 NUT,NUT GR 2H,LENGTH NOT INCLUDING CROWN ORPOINT HEIGHTNA02746STUD ASSEMBLY CONTINUOUS THREAD; M20 X 290 MM LG,CS,ASTM A193STUD,STUD GR B7,M20 DIA,METRIC THD SER,290 MM LG,HEAVY HEX NUT,2NUT (S),ASTM A194 NUT,NUT GR 2H,LENGTH NOT INCLUDING CROWN ORPOINT HEIGHTNA02747STUD ASSEMBLY CONTINUOUS THREAD; M20 X 200 MM LG,CS,ASTM A193STUD,STUD GR B7,M20 DIA,METRIC THD SER,200 MM LG,HEAVY HEX NUT,2NUT (S),ASTM A194 NUT,NUT GR 2H,LENGTH NOT INCLUDING CROWN ORPOINT HEIGHTNA02748STUD ASSEMBLY CONTINUOUS THREAD; M22 X 370 MM LG,CS,ASTM A193STUD,STUD GR B8 CL1,M22 DIA,METRIC THD SER,370 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 8,LENGTH NOT INCLUDING CROWNOR POINT HEIGHTNA02749STUD ASSEMBLY CONTINUOUS THREAD; M24 X 260L,CS,ASTM A193STUD,STUD GR B7,M24 DIA,METRIC THD SER,260 MM LG,HEAVY HEX NUT,2NUT (S),ASTM A194 NUT,NUT GR 2H,LENGTH NOT INCLUDING CROWN ORPOINT HEIGHTNA02750STUD ASSEMBLY CONTINUOUS THREAD; M22 X 390 MMLG,CS,ASTM A193STUD,STUD GR B8 CL1,M22 DIA,METRIC THD SER,390 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 8,LENGTH NOT INCLUDING CROWNOR POINT HEIGHTNA02751STUD ASSEMBLY CONTINUOUS THREAD; M36 X 340 MM LG,CS,ASTM A193STUD,STUD GR B7M,M36 DIA,METRIC THD SER,340 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02752STUD ASSEMBLY CONTINUOUS THREAD; M36 X 480 MM LG,CS,ASTM A193STUD,STUD GR B7M,M36 DIA,METRIC THD SER,480 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02753STUD ASSEMBLY CONTINUOUS THREAD; M22 X 290 MM LG,CS,ASTM A193STUD,STUD GR B7M,M22 DIA,METRIC THD SER,290 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02754STUD ASSEMBLY CONTINUOUS THREAD; M22 X 220 MM LG,CS,ASTM A193STUD,STUD GR B7M,M22 DIA,METRIC THD SER,220 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02755STUD ASSEMBLY CONTINUOUS THREAD; M20 X 310 MM LG,CS,ASTM A193STUD,STUD GR B7M,M20 DIA,METRIC THD SER,310 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02756STUD ASSEMBLY CONTINUOUS THREAD; M20 X 325 MM LG,CS,ASTM A193STUD,STUD GR B7M,MM20 DIA,METRIC THD SER,325 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02757STUD ASSEMBLY CONTINUOUS THREAD; M56 X 690 MM LG,CS,ASTM A193STUD,STUD GR B7,M56 DIA,METRIC THD SER,690 MM LG,HEAVY HEX NUT,2NUT (S),ASTM A194 NUT,NUT GR 2H,LENGTH NOT INCLUDING CROWN ORPOINT HEIGHTNA02758STUD ASSEMBLY CONTINUOUS THREAD; M22 X 320 MM LG,CS,ASTM A193STUD,STUD GR B7M,M22 DIA,METRIC THD SER,320 MM LG,HEAVY HEXNUT,2 NUT (S),ASTM A194 NUT,NUT GR 2HM,LENGTH NOT INCLUDINGCROWN OR POINT HEIGHTNA02759BOLT ASSEMBLY U; ROUND BEND SHAPE,1/4-20 X 3-3/8 IN,ALLOYSTEEL,ASTM A276,GR 316,NATURAL,2 IN NPS,1/4 IN DIA,20THD,UNC-2A/2B THD SER,3-3/8 IN INSIDE L,HEX NUT,2 NUT (S),ASTMA276 NUT,NUT GR 316,NATURAL NUT,ASME/ANSI B1.1, ASME/ANSIB18.2.2,WITH NUT(S) SCREWED-ON, 2-3/8 IN OD, 3-3/8 IN CENTER OFPIPE TO END OF BOLTNA02760BOLT MACHINE; M24 X 300 MM LG,HEX HEAD,SS,ASTM A193,GR B7M,24 MMDIA,300 MM LG,USED AS JACKING BOLTSSPARE PART FOR:HEATER; 2-TIER, FUEL GAS ELECTRIC HEATER TYPE,1957 KW,480 VAC, 3PH, 60 HZ (3-WIRE),INCOLOY 825 SHEATH,EEXE T4 II ATEXEN,CONSISTING OF: 20" VESSEL, CONTROL PANEL, TRANSMITTER ASSY,SUNSHADE, JUNCTION & TERMINAL BOXNALOOKING FORWARD FOR YOUR QUOTATION.Regards, SALES CONTACTManisha ARIF MOHAMMADSALES CO-ORDINATOR (COUNTRY MANAGER)MOBILE - +966 555 839 925 ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- potable water specification
- general knowledge nemes
- potable water specification tank connection
- welded steel tanks for oil storage
- newport scientific
- uig bolted tanks and aluminum domes
- direct synthesis of alkali titanate nanowires from tio2
- activity 4 1a all about simple machines
- iso tc 67 sc 4 american petroleum institute
Related searches
- getroman com reviews
- acurafinancialservices.com account management
- acurafinancialservices.com account ma
- getroman.com tv
- http cashier.95516.com bing
- http cashier.95516.com bingprivacy notice.pdf
- connected mcgraw hill com lausd
- education.com games play
- rushmorelm.com one time payment
- autotrader.com used cars
- b com 2nd year syllabus
- gmail.com sign in