Hiepro.ehawaii.gov



TRAINING AND SERVICE AMMUNITION IN 40 CALIBER S&W, .223 CALIBER AND 5.56 x 45 mm RIFLE, AND 12-GAUGE SHOTGUN FOR THESTATE OF HAWAIIDEPARTMENT OF LAND AND NATURAL RESOURCESDIVISION OF CONSERVATION AND RESOURCES ENFORCEMENT (DOCARE)The State of Hawaii, Department of Land and Natural Resources, Division of Conservation and Resources Enforcement, (herein after referred to as “DLNR/DOCARE”) is seeking offers for furnishing and delivering of training and service ammunition in 40 caliber S&W, .223 and 5.56 x 45 mm rifle cartridge, and 12-gauge shotgun.IMPORTANT: THE AWARDED OFFEROR MUST HAVE “COMPLIANT” STATUS LISTED WITHIN HAWAII COMPLIANCE EXPRESS AT THE TIME OF AWARD. OFFERS MADE BY VENDORS WITHOUT COMPLIANT STATUS WILL BE DEEMED NON-RESPONSIVE AND WILL NOT BE ACCEPTED.All Ammunition shall be factory new (no reloads) and shall comply with Small Arms Ammunition Manufactures Institute (S.A.A.M.I) standards. Aluminum cartridge cases and plastic cartridge cases are unacceptable for center fire pistol and rifle use. All bids will include drop shipment costs.1.PISTOL TRAINING AMMUNITION: QUANTITYITEM DESCRIPTION31 cases/31,000 roundsSpeer or equal 40 caliber S&W, 165 grain total metal jacketLoad Number 53955 or equalPackaging: 1,000 rounds/case2.PISTOL SERVICE AMMUNITION: *QUANTITYITEM DESCRIPTION13 cases/13,000 roundsSpeer or equal 40 caliber S&W, 165 grain Gold Dot Hollow PointLoad Number 53970Packaging: 1,000 rounds/case3.RIFLE SERVICE AMMUNITION: *QUANTITYITEM DESCRIPTION19 cases/9,500 roundsSpeer or equal .223, 64 grain GDSP electrochemically bonded bulletLoad Number 24448 or equalPackaging: 500 rounds/case4.RIFLE TRAINING AMMUNITION: QUANTITYITEM DESCRIPTION89 cases/40,050 roundsFederal or equal 5.56 x 45 mm, 55 grain FMJ Boat-tail or equal55 gr Ball 90 rounds clipPackaging: 450 rounds/case5.12 GAUGE SLUG AMMUNITION: *QUANTITYITEM DESCRIPTION45 cases/11,250 roundsFederal or equal 12-gauge slug or equalLoad Number LEB127RSPackaging: 250 rounds/caseSPECIFICATIONSESTIMATED QUANTITY/DROP SHIPMENT DELIVERY TO EACH BRANCHDOCARE – Maui BranchPhone: (808) 873-3990CASE QUANTITYROUNDS PER CASEROUND COUNTPistol Training Ammo111,00011,000Pistol Service Ammo31,0003,000Rifle, Service Ammo65003,000Rifle, Training Ammo2645011,700Shotgun, Slugs102503,000DOCARE – Hawaii BranchPhone: (808) 933-3460CASE QUANTITYROUNDS PER CASEROUND COUNTPistol Training Ammo31,0003,000Pistol Service Ammo21,0002,000Rifle, Service Ammo45002,000Rifle, Training Ammo74503,140Shotgun, Slugs202505,000______________________________________________________________________DOCARE – Oahu BranchPhone: (808) 587-0077CASE QUANTITYROUNDS PER CASEROUND COUNTPistol Training Ammo101,00010,000Pistol Service Ammo61,0006,000Rifle, Service Ammo65003,000Rifle, Training Ammo4545020,250Shotgun, Slugs152503,7500______________________________________________________________________DOCARE – Kauai BranchPhone: (808) 274-3521CASE QUANTITYROUNDS PER CASEROUND COUNTPistol Training Ammo71,0007,000Pistol Service Ammo21,0002,000Rifle, Service Ammo35001,500Rifle, Training Ammo114504,950Shotgun, Slugs000DELIVERYTraining and service ammunition shall be delivered to the drop ship locations no later than 180 days from the date the order is made.Delivery Address:DOCARE - Maui BranchDepartment of Land and Natural ResourcesDivision of Conservation and Resources Enforcement175 South Puunene Ave.Kahului, HI 96732DOCARE - Hawaii BranchDepartment of Land and Natural ResourcesDivision of Conservation and Resources Enforcement35 Holomua StreetHilo, HI 96720DOCARE - Oahu BranchDepartment of Land and Natural ResourcesDivision of Conservation and Resources Enforcement2551 Waimano Home RoadPearl City, HI 96782DOCARE - Kauai BranchDepartment of Land and Natural ResourcesDivision of Conservation and Resources Enforcement3060 Eiwa Street, Room 205Lihue, HI 96766Payment, Invoice Address:Department of Land and Natural ResourcesDivision of Conservation and Resources Enforcement1151 Punchbowl Street, Room 311Honolulu, HI 96813WARRANTYAmmunition furnished shall be fully guaranteed by the Contractor against defects resulting from the use of defective or inferior materials or from negligent workmanship.SPECIFICATIONSITEM NO. 1:PISTOL TRAINING AMMUNTIONSpeer 40 caliber S&W, 165 grain total metal jacketLoad Number 53955 or equalPackaging: 1,000 rounds/caseITEMDESCRIPTION1Caliber:.40 S&W2Casing:Nickel plated or brass3Bullet:165 grains full metal jacketed4Primer:CCI #500 Lead Styphnate, non-corrosive orequivalent5Operating Range:-65 degrees to +150 degrees Fahrenheit6Primer Sealant:Water resistant lacquer7Case Mouth Sealant:None8Case Knurl:None9Head Stamp:Each loaded cartridge shall be head stamped with the manufacturer’s symbol an appropriatecartridge designation10Lot Identification:Each lot of ammunition is assigned a uniqueidentification number to include the date,month and year of manufacture or assembly line on which manufactured11Accuracy:Average of five 5-round consecutive groups not to exceed 3.0 inches at 25 yards 12Velocity:1150 +/- 50 FPS using a 4.0-inch SAAMI 4”test barrel13Chamber Pressure:Piezotronic maximum average per 10 rounds – 35,000 PSI14Propellant Detection:100% mechanical and/or electrical detection ofPropellant15Visual Inspection:100% visual inspection of finished cartridgesPrior to packagingITEM NO. 2:PISTOL SERVICE AMMUNITION Speer 40 caliber S&W, 165 grain Gold Dot Hollow PointLoad Number 53970Packaging: 1,000 rounds/caseITEMDESCRIPTION1Caliber:.40 S&W or equal2Casing:Nickel plated brass3Bullet:165 grains Gold Dot Hollow Point* or equivalent4Primer:CCI Primer No. 500 or equivalent5Operating Range:-40 degrees to +125 degrees Fahrenheit6Primer Sealant:Water resistant nitrocellulose lacquer sealantor equivalent7Case Mouth Sealant:Water resistant mouth sealant8Head Stamp:Each loaded cartridge shall be head stamped with the manufacturer’s symbol an appropriatecartridge designation9Lot Identification:Each lot of ammunition is assigned a uniqueidentification number to include the date,month and year of manufacturer’s symboland appropriate cartridge designation10Accuracy:Ammunition to exceed SAAMI AccuracyRecommendations in a SAAMI Accuracy TestBarrell 11Instrumental Velocity:1050 +/- 50 FPS using a 4.0-inch SAAMI standard test barrel12Muzzle Energy:Minimum 405 Ft-Lbs13Chamber Pressure:Piezotronic maximum average per 10 rounds –35,000 PSI14Powder:Each cartridge shall be loaded with flashsuppressant powder15Bullet Pull:Minimum individual 50 Lbs16Propellant Detection:100% mechanical and/or electrical detection ofpropellant levels within the cartridge17Visual Inspection:100% visual inspection of finished cartridgesprior to packaging*Bonded jacketed hollow point bullet must have consistent and positive expansion through barrier test materialITEM NO. 3:RIFLE SERVICE AMMUNITIONSpeer .223, 64 grain GDSP electrochemically bonded bulletLoad Number 24448 or equalPackaging: 500 rounds/caseITEMDESCRIPTION1Bullet:64 grain GDSP electrically plated Soft Pointbullet2Primer:Federal #205 utilizing lead styphnate primingmixture3Primer Sealant:Anaerobic clear, Fluoresces under UV light4Mouth Sealant:None5Shell Case:Nickel plated cartridge brass to enhancefeeding and prevent corrosion. Each cartridgeto be stamped with the manufacturer’s symboland caliber designation6Velocity:3,000 +/- 50 FPS from a standard 24” SAAMIbarrel7Exterior Ballistics:Maximum calculated theoretical range of 12,463 feet with departure angle of 34 degreeselevation. 404 FPS impact velocity at an angle of -66 degrees. Time in flight 29 seconds8Pressure:Not to exceed SAAMI pressure recommendation, maximum Average pressure below 55,000 psi, measured with SAAMI piezoelectric conformal transducermethod9Accuracy:Large group of five, five shot consecutive groups not to exceed three inches at 200yards10Propellant:Made in USA by an ISO 9001 certified supplier.Flash suppressed and resistant to pressure and velocity changes at extreme temperatures 11Lot Number:Traceable to date of manufacture and loadingmachine12Visual Inspection:100% visual inspection of finished cartridgesprior to packaging*Bonded jacketed hollow point bullet must have consistent and positive expansion through barrier test materialITEM NO. 4:RIFLE TRAINING AMMUNITIONFederal 5.56 x 45 mm, 55 grain FMJ Boat-tail or equal55 gr Ball 90 rounds clipPackaging: 450 rounds/caseITEMDESCRIPTION1Caliber:5.56 mm2Casing:Brass (Copper Alloy No. 260)3Bullet:55 grain FMJ Boat-tail4Primer:M415Operating Range:-40 degrees to +125 degrees Fahrenheit 6Primer Sealant:Water resistant7Case Mouth Sealant:Water resistant8Case Knurl:None9Head Stamp:Each loaded cartridge shall be head stamped with the manufacturer’s symbol and year ofmanufacture 10Accuracy:3-10 round groups not to exceed 2.00 inchesmeans radius maximum average at 200 yards 11Instrumental Velocity:3165 +/- FPS (78 feet from muzzle) using a 5.56 test barrel, 20” long12Energy:1223 Ft-Lbs at 78’13Chamber Pressure:Piezotronic maximum average per 10 rounds – 55,000 PSI in 5.56 test barrel (case mouthlocation)14Bullet Pull:Minimum individual 35 lbs15Propellant Detection:100% mechanical and/or electrical detectionof propellant levels within the cartridge16Visual Detection:100% visual inspection of finished cartridges prior to packagingITEM NO. 5:12-GAUGE SLUG AMMUNITIONFederal 12-gauge slug or equalLoad Number LEB127RSPackaging: 250 rounds/caseITEMDESCRIPTION1Caliber:12-gauge 2 ?”2Shot Buffer:None3Shot Volume:1 oz. slug4Shot Description:Foster Rifled Slug5Primer:Federal No. 202 sealed with lacquer6Dram Equivalent:Max7Tube:Blue plastic8Chamfered Tube:No9Wadding:Recoil wad and plastic sphere 10Basewad:9/16” paper basewad 11Crimp:Roll crimp standard12Crimp Seal:No13Head Stamp:Each loaded cartridge shall be head stampedwith the manufacturer’s symbol and appropriate cartridge designation14Pattern (Accuracy):3” E.S. at 50 yards in test barrel15Instrumental Velocity:1650 +/- 50 FPS at 3 feet from the muzzle of astandard SAAMI test barrel16Chamber Pressure:11,500 PSI maximum average17Propellant Detection:100% mechanical and/or electrical detection ofpropellant levels within the cartridge18Visual Inspection:100% visual inspection of finished cartridgesprior to packing19Lot Identification:Each lot of ammunition is assigned a uniqueidentification number to include the day, monthand year of manufacture and assembly line ofwhich manufactured*Bonded jacketed hollow point bullet must have consistent and positive expansion through barrier test materialSCOPEThe furnishing and delivery of training and service ammunition to the two drop ship locations for DLNR/DOCARE.IMPORTANT: THE AWARDED OFFEROR MUST HAVE “COMPLIANT” STATUS LISTED WITHIN HAWAII COMPLIANCE EXPRESS AT THE TIME OF AWARD. OFFERS MADE BY VENDORS WITHOUT COMPLIANT STATUS WILL BE DEEMED NON-RESPONSIVE AND WILL NOT BE ACCEPTED. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download