Supplementary Requirements to IEC 61439-1 & 2 LV Switchgear ... - JIP33
SPECIFICATION
S-560
NOVEMBER
2016
Supplementary Requirements to IEC 61439-1 & 2 LV Switchgear & Controlgear
Acknowledgements
This IOGP Specification was prepared by a Joint Industry Project 33 Standardization of Equipment Specifications for Procurement organized by IOGP with support by the World Economic Forum (WEF).
Disclaimer Whilst every effort has been made to ensure the accuracy of the information contained in this publication, neither IOGP nor any of its Members past present or future warrants its accuracy or will, regardless of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the recipient's own risk on the basis that any use by the recipient constitutes agreement to the terms of this disclaimer. The recipient is obliged to inform any subsequent recipient of such terms. This publication is made available for information purposes and solely for the private use of the user. IOGP will not directly or indirectly endorse, approve or accredit the content of any course, event or otherwise where this publication will be reproduced. Copyright notice The contents of these pages are ? International Association of Oil & Gas Producers. Permission is given to reproduce this report in whole or in part provided (i) that the copyright of IOGP and (ii) the sources are acknowledged. All other rights are reserved. Any other use requires the prior written permission of IOGP. These Terms and Conditions shall be governed by and construed in accordance with the laws of England and Wales. Disputes arising here from shall be exclusively subject to the jurisdiction of the courts of England and Wales.
SPECIFICATION
S-560
NOVEMBER
2016
Supplementary Requirements to IEC 61439-1 & 2 LV Switchgear & Controlgear
Revision history VERSION 2.0 1.0
DATE November 2016 June 2016
AMENDMENTS Second release. Issued for use. First release
Supplementary Requirements to IEC 61439 - LV Switchgear and Controlgear Assemblies
Table of Contents
Page Foreword ........................................................................................................................................ 2 Introduction ..................................................................................................................................... 2 1 Scope .................................................................................................................................... 4 2 Normative references............................................................................................................. 5 3 Terms and definitions............................................................................................................. 5
3.10 Manufacturer/user...................................................................................................... 6 4 Symbols and abbreviations .................................................................................................... 6 5 Interface characteristics ......................................................................................................... 8
5.1 General....................................................................................................................... 8 5.2 Voltage ratings............................................................................................................ 8 5.3 Current ratings ............................................................................................................ 8 5.4 Rated diversity factor (RDF) (IEC 61439-2)................................................................. 8 6 Information............................................................................................................................. 8 6.1 PSC-ASSEMBLY designation marking ....................................................................... 9 6.2 Documentation............................................................................................................ 9 6.3 Device and / or component identification................................................................... 10 7 Service conditions................................................................................................................ 10 7.1 Normal service conditions ......................................................................................... 10 7.2 Special service conditions ......................................................................................... 10 7.3 Conditions during transport, storage and installation ................................................. 11 8 Constructional requirements ................................................................................................ 11 8.1 Strength of materials and parts ................................................................................. 12 8.4 Protection against electric shock............................................................................... 14 8.5 Incorporation of switching devices and components ................................................. 14 8.6 Internal electrical circuits and connections ................................................................ 25 8.7 Cooling ..................................................................................................................... 27 8.8 Terminals for external conductors ............................................................................. 27 9 Performance requirements................................................................................................... 29 9.3 Short-circuit protection and short-circuit withstand strength ...................................... 29 10 Design verification ............................................................................................................... 29 10.1 General..................................................................................................................... 29 11 Routine verification / FAT..................................................................................................... 29 11.1 General..................................................................................................................... 29 11.101ECMS simulation test................................................................................................ 30 Bibliography .................................................................................................................................. 31
Page 1 of 31
S-560
Supplementary Requirements to IEC 61439 - LV Switchgear and Controlgear Assemblies
Foreword
This Specification was prepared by a Joint Industry Project 33 Standardization of Equipment Specifications for Procurement organized by IOGP with support by the World Economic Forum (WEF). Seventeen key members from WEF and IOGP membership participated in JIP33 with an effort to leverage and improve industry level standardization. The scope of work has been to harmonize procurement specifications from the seventeen participating Members and develop one agreed and jointly approved Specification building on recognized industry and/or international standards.
Following agreement of the relevant JIP33 sub-team and approval by the JIP33 Steering Committee, the IOGP Management Committee has agreed to the publication of this Specification by IOGP. Where adopted by the individual operating companies, this Specification and associated documentation supersedes existing company documentation for the purpose of industry harmonized practice.
Introduction
This Specification presumes that a compilation of documents will be used for the definition, enquiry and purchase of PSC-Assemblies, which will consist of part, or all of the following:
- S-560, Supplementary Requirements to IEC 61439 - LV Switchgear and Controlgear Assemblies.
- LV PSC-Assembly Requisition (Purchase Order), with required documentation, quality assurance and inspection attachments.
- LV PSC-Assembly Data Sheet(s) for common and individual assembly requirements (supersedes IEC 61439-2 Annex BB (informative), User information template).
- LV PSC-Assembly Circuit Schedule, or data file containing this information (one per Assembly).
- User Diagram(s), such as single line diagrams, schematic diagrams, wiring diagrams, logic diagrams.
Supporting documents requirements will be based on the following:
- IOGP S-560D, Data sheets for IEC 61439 - LV Switchgear and Controlgear Assemblies. - IOGP S-560L, Supplier Deliverable Requirements List (SDRL) for IEC 61439 - LV
Switchgear and Controlgear Assemblies. - IOGP S-560Q, Purchase Order Quality Requirements (POQR) for IEC 61439 - LV
Switchgear and Controlgear Assemblies. The following requirements are not detailed within this Specification and will be identified in the Requisition, or as an attachment to the Requisition:
- Health, safety and environmental management requirements. - Packing, preservation, marking and shipping requirements (in addition to the standard
requirement in clause 6.2.2). - Spare parts. Unless defined otherwise in the Requisition, the order of precedence (highest authority listed first) of the codes and standards shall be:
a. Local statutory codes and regulations.
Page 2 of 31
S-560
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- cse 560 practice problem set 1
- dc brushless thruster tecnadyne
- cisco ncs 560 4 router hardware installation guide
- section 560 coating new structural steel florida department of
- section 560 coating new structural steel
- code 560 iowa legislature
- cover sheet 560di
- phys 560 assignment 1 university of washington
- cse 560 practice problem set 1 solutions
- chapter sixty one children s specialty clinic services rule title page