FITTING GUIDE $647.4$684//+'9'*:0;'+ - Wren Kitchens
FITTING GUIDE
L CORNER BASE CABINET
FI.PK.FIT.002 - BASE 2
(H) x8 1 ?" Screws
(B) x82 5/8" Screws
(Ff) x10 Fixing Plate
(K) x3 L Bracket - Large (V) x1 XL Space-Plug (U) x2 Space-Plug
Screws for attaching to walls and countertop are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall and countertop construction are used. Please refer to the specialist countertop supplier if these are required for solid surface countertops.
Step 1.
Attach Fixing Plates (Ff) onto cabinets in 3 positions (1), (2), (3) as shown using 4 x 5/8" screws (B) per plate. Be careful not to interfere with leg positions.
Ff (3)
Ff
Ff Ff
(1)
Ff Ff
(2)
View from underside
Sample cabinet shown View from rear of cabinet
Step 2.
B
Secure each of the legs into place with 2 x 5/8" screws (B). Ensure legs
are rotated as shown so that part of them is supporting the end panel.
Page 1
Step 3.
Secure cabinet to the wall using Space-Plugs (U). Use a stud finder to locate the studs on the wall, drill pilot holes through the back brace of the cabinet into the wall at the stud locations. Unwind the Space-Plugs (U) until they contact both surfaces, insert and tighten an appropriately sized screw through the back of the cabinet and the Space-Plugs (U) into the wall. (Use appropriate fixing for wall construction where a stud is not available) The 2 regular Space-Plugs (U) are to be used on the back of the larger cabinet and the XL Space-Plug (V) at the rear of the smaller cabinet in the assembly.
For Internal Use:FI.PK.FIT.002_50-WKIN0008_BASE2_LCNR_Rev5
Ff B
Ff B
XL Space-Plug ReguPlalur gSspace-
FITTING GUIDE
L CORNER BASE CABINET
Step 4.
Use 2 x Fixing Plates (Ff) with 4 x 5/8" screws (B) to attach the corner post to the door frontal.
Sample cabinet shown View from rear of cabinet
Step 5.
The remaining two fixing plates (Ff) are to be used to attach the loose shelf sections together.
Ff Ff Ff
Sample cabinet shown
H
Step 6.
Screw into any adjacent cabinets using 1 ?" screws (H) provided to
secure the cabinet. Screw just to the rear of the hinge plate and to the
rear of the cabinet at the top and bottom. Place cover caps on the screw
heads to conceal them.
Sample Hinge shown For Internal Use:FI.PK.FIT.002_50-WKIN0008_BASE2_LCNR_Rev5
Page 2
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- installation procedure for duraseal rpip 684 00 splices
- section s emj
- bill summary fiscal note department contact seattle
- south carolina department of health and environmental control
- news release
- international telecommunication union
- dipped radial capacitors farnell
- a precast concrete bridge bent designed to re center wa
- d155 d179 d206 d239 d268 d310 d358 dt239 jensales
- s 3 m nj 07430 p 201 684 0055 f 201 684
Related searches
- 6 1 or 2 684 684 1 0 0 0 1
- 6 1 or 3 684 684 1 0 0 0 1
- 192 168 1 or 2 684 684 1 0 0 0 1 1 username and password reset
- 192 168 1 or 3 684 684 1 0 0 0 1 1 username and password reset
- 6 1 or 2 684 684 1 0 0 0
- 6 1 or 2 684 684 1 0 0
- i e yahshua 5 7 7 0 2 9 0 0 6 yah shua
- 5 7 7 0 2 9 0 0 6
- 5 7 7 0 2 9 0 0 6 i e
- 5 7 7 0 2 9 0 0 6 i
- i e 5 7 7 0 2 9 0 0 6 i e
- i e 5 7 7 0 2 9 0 0 6