JustAnswer
| |
| |
| |
[pic]
|1999 Acura CL V6-3.0L SOHC (VTEC) |
| Vehicle Level [pic] Brakes and Traction Control [pic] Antilock Brakes / Traction Control Systems [pic] Testing and |
|Inspection [pic] Reading and Clearing Diagnostic Trouble Codes [pic] Displaying & Reading Trouble Codes [pic] |
| |
|[pic] |
|Displaying & Reading Trouble Codes |
| |
| |
| |
|NOTE: This operation can also be done with the Honda PGM Tester. |
| |
|[pic] |
|[pic] |
| |
|[pic] |
| |
|Top of Form |
|[pic] |
|Bottom of Form[pic] |
|Top of Form |
|[pic] |
|Bottom of Form |
| |
| |
| |
| |
|Connect the SCS service connector to the service check connector (2P) located passenger's side under dash. |
|Turn the ignition switch ON (II) without the brake pedal depressed. NOTE: If the brake pedal is depressed when turning the ignition switch ON |
|(II), the system shifts to the DTC Erasure mode. |
|[pic][pic] |
| |
|[pic] |
| |
|Top of Form |
|[pic] |
|Bottom of Form[pic] |
|Top of Form |
|[pic] |
|Bottom of Form |
| |
| |
| |
| |
|[pic] |
|[pic] |
| |
|[pic] |
| |
|Top of Form |
|[pic] |
|Bottom of Form[pic] |
|Top of Form |
|[pic] |
|Bottom of Form |
| |
| |
| |
| |
|The blinking frequency indicates the DTC. NOTE: If the DTC is not memorized, the ABS indicator will go off for 3.6 seconds, and then come back |
|on. |
|Turn the ignition switch OFF, and remove the SCS service connector. NOTE: The Malfunction Indicator Lamp (MIL) will stay on after the engine is |
|started if the SCS service connector is connected. |
|CONDITIONS FOR DTC INDICATION |
|Vehicle speed is 6 mph (10 km/h) or less. |
|The SCS service connector is connected before the ignition switch is turned ON (II). |
|The brake pedal is released. |
| |
|[pic] |
| |
| |
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.