ARCAT

 SECTION 07 91 26 - Joint FillersJOINT SEALANTSDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2013 - 2015 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** Franklin International Inc. - Titebond; joint sealants, construction adhesives..This section is based on the products of Franklin International Inc. - Titebond, which is located at:2020 Bruck St.Columbus, OH 43207Toll Free Tel: 800-877-4583Tel: 614-443-0241Fax: 614-445-1813Email: request info (BeeMiller@ )Web: [ Click Here ] for additional information.For more than 75 years, Franklin International has been the industry leader in bonding wood and wood products. Our history of innovation started in 1935 with Liquid Hide Glue, a ready-to-use formula that revolutionized the woodworking industry. Since that time, we have continued to earn our reputation as a company with a strong commitment to solving problems, and doing it first. From wood glues to construction adhesives to caulks and sealants, the Titebond brand sets the standard for product excellence.Our history as a leader in construction adhesives began back in the early 1970s with the introduction of Titebond Construction Adhesive, one of the first adhesives to pass the American Plywood Association's AFG-01 specification. Twenty years later, we developed the industry's first solvent free construction adhesive to also exceed the performance requirements of this specification. Today, Franklin continues to set the standard by offering a complete line of adhesives for every construction, remodeling and repair project. Through more than 40 years of innovative research and development, the Titebond brand of caulks and sealants meet stringent VOC and indoor air quality regulations, without compromising superior product and quality performance. Among our many accomplishments within this category include: the first comprehensive line of colored caulks; the first modified acrylic caulk to be applied at low temperatures; and the first advanced polymer technology caulks for the vinyl siding, fiber cement siding, metal roofing and overall building material industry. Titebond...The Professional's Choice!

GENERAL

SECTION INCLUDES

Joint sealants.

RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

Section - .

Section 09 60 02 - Flooring Adhesives.

REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

AAMA 808.3 - Specification for Exterior Perimeter Sealing Compound.

ASTM International (ASTM):

ASTM C 510 - Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants.

ASTM C 661 - Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer.

ASTM C 679 - Standard Test Method for Tack-Free Time of Elastomeric Sealants.

ASTM C 719 - Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle).

ASTM C 794 - Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants.

ASTM C 834 - Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants.

ASTM C 920 - Standard Specification for Elastomeric Joint Sealants.

ASTM C1382 - Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints.

ASTM D 412 - Standard Test Methods for Vulcanized Rubber and Thermoplastic ElastomersTension.

ASTM D 6511 - Standard Test Methods for Solvent Bearing Bituminous Compounds.

ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.

ASTM E 90 - Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements.

ASTM E 162 - Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.

ASTM E 662 - Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials.

ASTM G 155 - Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials.

CAN/CGSB-19. 13-M87 - Sealing Compound, One-Component, Elastomeric, Chemical Curing.

FDA regulation 21-CFR-177.2600 - Rubber Articles Intended For Repeated Use.

Federal specification TT-S-00230C - Sealing Compound: Elastomeric Type, Single Component (For Calking, Sealing, And Glazing In Buildings And Other Structures).

GreenSeal GS-36 Specifications - Standard For Adhesives For Commercial Use.

National Science Foundation (NSF) 51 - Food Equipment Materials.

South Coast Air Quality Management District (SCAQMD) Rule #1168 - Adhesive And Sealant Applications.

Underwriters Laboratory (UL) 723 - Test for Surface Burning Characteristics of Building Materials.

SUBMITTALS

Submit under provisions of Section 01 30 00 - Administrative Requirements.

Product Data: Manufacturer's data sheets on each product to be used, including:

Preparation instructions and recommendations.

Storage and handling requirements and recommendations.

Installation methods.

QUALITY ASSURANCE

Manufacturer Qualifications: Firm engaged in manufacture of construction sealants, with minimum 10 years experience.

Installer Qualifications: Experienced installer with a successful track record of five years or more, or a member of Sealant Waterproofing and Restoration Institute.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

Finish areas designated by Architect.

Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

Refinish mock-up area as required to produce acceptable work.

DELIVERY, STORAGE, AND HANDLING

Store products in manufacturer's unopened packaging until ready for installation.

PROJECT CONDITIONS

Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

PRODUCTS

MANUFACTURERS

Acceptable Manufacturer: Franklin International Inc. - Titebond, which is located at: 2020 Bruck St.; Columbus, OH 43207; Toll Free Tel: 800-877-4583; Tel: 614-443-0241; Fax: 614-445-1813; Email: request info (BeeMiller@ ); Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

Substitutions: Not permitted.

Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

SEALANTS

Multi-Purpose Sealant:

** NOTE TO SPECIFIER ** Titebond? WeatherMaster? Sealant has been specifically formulated to outperform all other sealant technologies, including silicones, tripolymers and urethanes. This superior polymer formula provides the best possible performance on siding, windows, doors and vents. In addition to offering permanent flexibility, it provides unbeatable adhesion to wood, masonry, PVC, fiber cement, siding/trim and most common building materials.

Product: Titebond WeatherMaster Sealant as manufactured by Franklin International Inc.

Type: A one-component, moisture cure, non-priming, premium grade, low VOC advanced MS polymer sealant.

Titebond WeatherMaster Translucent is an advanced neutral cure silicone and is not paintable.

** NOTE TO SPECIFIER ** Delete class test not required.

Class: ASTM C920 Type S Grade NS Class 25 Use NT, M (when primed), G and A.

Class: CAN/CGSB-19. 13-M87 Classification MCG-2-25-A-N (white, colors and crystal clear).

Exceeds the requirements of ASTM D412, ASTM C510, ASTM C661, ASTM C679 and ASTM C719.

Exceeds requirements of Federal specification TT-S-00230C Type II Class A (white, colors and crystal clear).

USDA approved for use in meat and poultry areas (white, colors and crystal clear).

Reactive VOC: 9 g/L (less than 2 percent wt) white and colors, 11 g/L (less than 2 percent wt) crystal clear, 3 g/L (less than 0.3 percent wt) translucent.

Solids 98 percent.

** NOTE TO SPECIFIER ** Titebond? WeatherMaster? ULTIMATE MP Sealant is specifically formulated to outperform all other sealant technologies, including VOC solvent, silicones, tripolymers, and urethanes. It offers unbeatable adhesion to aluminum, painted metal, PVC, concrete, wood, masonry, vinyl, glass, plastic, steel, asphalt roofing and most common building materials such as wall panels, siding, flashing, and sheet metal including Kynar? and Hylar? 5000 coated metal panels. Titebond? WeatherMaster ULTIMATE MP Sealant adheres well to damp surfaces and provides a weather-tight seal against water, wind, dust and dirt. This sealant is ideal for use on a variety of roofing applications, gutters, metal and vinyl siding, windows, doors, and air vents. It will form a flexible seal that is perfect for use on recreational vehicles, tractor trailers and buses.

Product: Titebond WeatherMaster ULTIMATE MP Sealant as manufactured by Franklin International Inc.

Type: A one-component, moisture cure, non-priming, premium grade, low VOC advanced MS polymer sealant.

Titebond WeatherMaster ULTIMATE MP Translucent is an advanced neutral cure silicone and is not paintable.

Exceeds the requirements of ASTM C920 Type S Grade NS Class 50. Use NT, T, G, A and M.

Titebond WeatherMaster ULTIMATE MP Translucent is Class 25.

Federal Specification TT-S-00230C, Type II, Class A.

Tested in accordance with ASTM C1382 for use in EIFS systems (white & colors).

Meets the requirements of AAMA 808.3-92 (translucent).

Reactive VOC: 9 g/L (less than 2 percent wt) white and colors, 11 g/L (less than 2 percent wt) crystal clear, 3 g/L (less than 0.3 percent wt) translucent.

** NOTE TO SPECIFIER ** Titebond? 100 percent Silicone Sealant is a versatile 100 percent silicone formula that is ideal for both interior and exterior applications. It offers excellent adhesion to many common construction materials, including vinyl, aluminum, glass and painted surfaces. It also provides a strong, flexible seal that offers excellent water-resistance.

Product: Titebond 100 percent Silicone Sealant as manufactured by Franklin International Inc.

Type: Silicone.

Solids 85 percent.

Non-reactive VOC 30 g/L (less than3 percent wt.).

Meets the performance requirements of Federal Specification TT-S-001543A and TT-S-00230C.

Meets the performance requirements of ASTM C920.

Meets requirements of FDA regulation 21-CFR-177.2600 for indirect food contact.

NSF 51 Certified for direct food contact.

** NOTE TO SPECIFIER ** Titebond? UA 920 is a urethane acrylic elastomeric formula that does it all. It has excellent adhesion and flexibility, making it the professional's ideal choice for all interior and exterior construction, home remodeling and repair projects. It is mildew resistant, non-yellowing and reduces dirt pickup. UA 920 forms an airtight, water resistant seal on most common building materials, including concrete, fiber cement, metal, wood and vinyl siding and trim. It offers a quick grab, is easy to tool and finish and remains permanently flexible.

Product: Titebond UA 920 as manufactured by Franklin International Inc.

Type: Urethane / Modified Acrylic Blend (Siliconized).

Exceeds requirements of ASTM C920 Grade NS Class 25 and ASTM C834 Type OP for white and colors (Type C for Clear) Grade -18 degrees CC

Exceeds requirements of Federal specification TT-S-00230C Type II Class A

No failures when tested in accordance with ASTM C1382 when used per ASTM C920 Class 25

Meets the performance requirements of AAMA 808.3

Solids 70 percent white & colors, 65 percent clear.

Non-reactive VOC 18g/L (less than1.5 percent) white & colors, 11 g/L (less than1.5 percent) clear.

Metal Roof and Siding Sealant:

** NOTE TO SPECIFIER ** Titebond? WeatherMaster? Metal Roof Sealant is specifically formulated to outperform all other sealant technologies, including VOC solvent, silicones, tripolymers and urethanes. This superior polymer formula provides a weather-tight seal against water, wind, dust and dirt. It offers exceptional adhesion to Kynar? coated metal materials, along with standard metal, aluminum, steel, galvanized bonderized surfaces, plastics and glass. The product is ideal for use on a wide variety of roofing applications, metal roof, trim, architectural metal siding, aluminum, galvanized steel, galvanized gutters, flashing and downspouts. It also provides unbeatable adhesion to wood, masonry, PVC and most common building materials.

Product: Titebond WeatherMaster Metal Roof Sealant as manufactured by Franklin International Inc.

Type: A one-component, moisture cure, non-priming, premium grade, low VOC advanced MS polymer sealant.

Titebond WeatherMaster Metal Roof Translucent is an advanced neutral cure silicone and is not paintable.

** NOTE TO SPECIFIER ** Delete class test not required.

Exceeds the requirements of ASTM C920 Type S Grade NS Class 50 Use NT, T, G, A and O.

Titebond WeatherMaster Metal Roof Translucent is Class 25.

Meets the requirements of CAN/CGSB-19 13-M87, Classification MCG-2-40-A-N.

Titebond WeatherMaster Metal Roof Translucent is Classification MCG-2-25-A-N.

Federal Specification TT-S-00230C, Type II, Class A.

Meets the requirements of ASTM G155, Surface Flame Spread ASTM E162, and Smoke Generation ASTM E662 (white & colors).

USDA approved for use in meat and poultry areas (white & colors).

Meets the requirements of AAMA 808.3-92 (translucent).

Gutter and Seam Sealant:

** NOTE TO SPECIFIER ** Titebond? WeatherMaster? Gutter & Seam Sealant provides a highly weather-resistant seal against water, wind, dust and dirt. This long-lasting advanced polymer sealant retains resiliency and flexibility for years.Gutter & Seam Sealant was formulated specifically for sealing aluminum, galvanized and vinyl clad gutters and downspouts. This sealant has excellent adhesion to wood, metal, aluminum, steel, plastics, masonry and glass. It expands and contracts with the change of weather and will not crack.

Product: Titebond WeatherMaster Gutter & Seam Sealant as manufactured by Franklin International Inc.

Type: A one-component, moisture cure, non-priming, premium grade, low VOC advanced MS polymer sealant.

** NOTE TO SPECIFIER ** Delete class test not required.

Class: ASTM C920 Type S Grade NS Class 25 Use NT, M (when primed), G and A.

Reactive VOC: 9 g/L (less than 2 percent wt).

Acoustical Smoke & Sound Sealant:

** NOTE TO SPECIFIER ** Titebond GREENchoice Professional Acoustical Smoke & Sound Sealant is a non-flammable, latex-based product designed specifically for the reduction of sound transmission in wall partition systems. Its primary function is to achieve and maintain the specific STC (Sound Transmission Class) value of the system designed.

Product: Titebond GREENchoice Acoustical Smoke & Sound Sealant as manufactured by Franklin International Inc.

Type: Acrylic polymer (non-reactive) Medium-viscosity caulk.

Mold & mildew resistant.

Exceeds the requirements of ASTM C661, ASTM C834, ASTM D217 and ASTM D412.

UL Tested and classified. Tested in accordance with ASTM E84 and ASTM E90.

Complies with UL 723.

Meets NFPA Class A fire rating.

Meets GreenSeal GS-36 specifications.

Siding Sealant:

** NOTE TO SPECIFIER ** Titebond? All Siding Sealant is a unique, premium grade elastomeric sealant formula that offers superior adhesion on all common construction materials. It is ideal for sealing doors, windows, soffits and awnings around vinyl, aluminum, stucco, wood, brick and glass.

Product: Titebond All Siding Sealant as manufactured by Franklin International Inc.

Type: Acrylic.

Meets ASTM C920 Type S Grade NS Class 25, ASTM C834 Type OP Grade -18 degrees CC.

Meets Federal Specification TT-S-00230C Type II Class A.

ASTM C661: Indentation Hardness (Shore A): 16.

ASTM C794: Adhesion in Peel:

Glass - 16.7 pli 100 percent cohesive failure.

Aluminum - 16.5 pli 100 percent cohesive failure.

Cement- 9pli 50 percent cohesive failure 50 percent Substrate failure.

Solids 78 percent.

Non-reactive VOC 25 g/L (less than1.5 percent wt.).

Blacktop Repair Sealant:

** NOTE TO SPECIFIER ** Titebond? Blacktop Repair is a durable, acrylic-latex formula for the repair of cracks in asphalt driveways, playgrounds, pavement and parking lots. It offers excellent adhesion and flexibility, which are superior to traditional tar or asphalt repair products. In addition, it will not chip, peel or pull away from the surface.

Product: Titebond Blacktop Repair Sealant as manufactured by Franklin International Inc.

Type: Acrylic latex.

Meets ASTM C834 Type OP Grade -18 degrees CC.

Solids 87 percent.

Non-reactive VOC 21 g/L (less than1.5 percent wt.).

Self Leveling Concrete Joint Sealant:

** NOTE TO SPECIFIER ** Titebond? Concrete Joint SL Sealant is a one-component, self-leveling, premium grade, high performance advanced polymer sealant which is specifically engineered for contraction/expansion joints and cracks in concrete decks and floors.

Product: Titebond Concrete Joint SL Sealant as manufactured by Franklin International Inc.

Type: One-component, self-leveling, premium grade, high performance advanced MS polymer sealant.

ASTM C920 Type S Grade P Class 25, Use T and M.

CAN/CGSB-19.13-M87 Class C-1-40-B-N & C-1-25-B-N.

Federal Specification TT-S-00230C Type I Class A.

VOC-compliant.

Solids 99 percent.

Non-reactive VOC 9 g/L (less than 0.15 percent wt.).

** NOTE TO SPECIFIER ** Titebond? Concrete Repair is a durable, acrylic latex formula for the repair of cracks in concrete, masonry and stucco surfaces. It is ideal for sidewalks, patios, basements, driveways, steps, mortar joints and house structures. In addition, it develops a strong, flexible bond that will not chip, peel or pull away from the surface.

Product: Titebond Concrete Repair Sealant as manufactured by Franklin International Inc.

Type: Acrylic latex.

Meets specification ASTM C834 Type OP Grade -18 degrees CC.

Solids 87 percent.

Non-reactive VOC 21 g/L (less than1.5 percent).

Kitchen & Bath Sealant:

** NOTE TO SPECIFIER ** Titebond? Kitchen & Bath Sealant is a modified acrylic formula specifically designed to permanently seal high-moisture areas found in kitchens and baths. It is ideal for sealing around tubs, showers, sinks and countertops and offers excellent adhesion to many common materials including vinyl, ceramic tile, aluminum, glass, marble, brick, wood, porcelain, plastic and painted surfaces.

Product: Titebond Kitchen & Bath Sealant as manufactured by Franklin International Inc.

Type: Modified acrylic.

Color White, almond and clear.

Meets ASTM C834 Type OP Grade 0 degrees CC (Type C Grade NF for clear).

Complies with FDA 21-CFR-177.2600.

Painters Caulk:

** NOTE TO SPECIFIER ** Titebond? Painter's Caulk is an economical, easy-to-use caulk that is formulated for interior and exterior pre-paint preparation. It offers good weather-resistance and provides a strong bond to most common building materials, including wood, metal, glass, masonry, aluminum and brick. It can be used for sealing joints, repairing cracks and back-filling gaps.

Product: Titebond Painters Caulk as manufactured by Franklin International Inc.

Type: Latex, White.

Solids 82 percent.

Non-reactive VOC 23 g/L (less than1.5 percent).

Meets ASTM C-834 Type OP Grade -18 degrees CC.

** NOTE TO SPECIFIER ** Titebond? Painter's Plus is a high-quality, versatile siliconized acrylic caulk that is designed for both interior and exterior applications. It offers an excellent flexible, air-tight, water-resistant seal and provides a strong bond to most common building materials, including wood, metal, glass, masonry, aluminum and brick. It is ideal for sealing joints, repairing cracks and back-filling gaps.

Product: Titebond Painters Plus Caulk as manufactured by Franklin International Inc.

Type: Siliconized acrylic.

White and colors exceed the requirements of ASTM C834 Type OP Grade -18 degrees CC.

Clear exceeds the requirements of ASTM C834 Type C Grade 0 degrees CC.

Solids 82 percent white, 60 percent clear, 87 percent colors,

Non-reactive VOC 23 g/L (less than1.5 percent) white, 5 g/L (less than1.5 percent) clear, 21 g/L (less than1.5 percent) colors.

Radon Sealant:

** NOTE TO SPECIFIER ** Titebond? Professional Radon Sealant is specifically designed to reduce the entry of radon. It should be used on foundation cracks, joints and penetrations, around foundation coatings normally used for damp proofing, and membranes surrounding the foundation. It is an extremely flexible and durable product which allows for extension and compression of at least 25 percent. The mold and mildew resistant formula dries quickly and can be painted within 2-4 hours of application.

Product: Titebond Radon Sealant as manufactured by Franklin International Inc.

Type: Acrylic.

Mold & mildew resistant.

Paintable.

Water cleanup.

VOC-compliant formula containing no added ozone-depleting chemicals, making it safer for you and the environment. It is nonflammable, emits no harmful fumes and cleans up with water.

Exceeds the requirements of ASTM C920 Grade NS Class 25, ASTM C834 Type OP Grade -18 degrees CC and Federal Specification TT-S-00230C Type II Class A.

Solids 77 percent.

Non-reactive VOC 19 g/L (less than1.3 percent wt.).

Roof Cement Sealant:

** NOTE TO SPECIFIER ** Titebond? Roof Cement is an all-weather, asphalt based patching compound specifically designed and formulated to repair cracks, seams, gaps and holes in roofing materials. This sealant is ideal for repair and new-construction roofing applications.

Product: Titebond Roof Cement Sealant as manufactured by Franklin International Inc.

Type: Asphalt (reactive) based patching compound.

Formulated to meet Federal Specification SS-C-153C Type I.

Complies to ASTM D6511, SCAQMD Rule #1168.

Solids 73 percent.

Non-reactive VOC 300 g/L.

EXECUTION

EXAMINATION

Clean surfaces thoroughly prior to installation. Surfaces must be cleaned down to the original substrate and free of any material or contaminant that may prevent or deter Examine joints to receive sealants. Notify Project Manager or Architect if conditions are not acceptable. Do not begin surface preparation or application until unacceptable conditions have been corrected.

PREPARATION

Clean surfaces thoroughly prior to installation. Surfaces must be cleaned down to the original substrate and free of any material or contaminant that may prevent or deter adhesion. Such contaminates include, but are not limited to: dirt, frost, loose particles, existing sealants, grease, oils, rust, and similar items.

INSTALLATION

Backer rod or bond breaker tape - The depth of the sealant must be controlled by using a suitable sealant backing material. The backing material must also function as a bond breaker to eliminate three sided adhesion and allow the sealant to expand and contract properly as designed.

Application: For best results, sealant should be applied when joint is at midpoint of its designed dynamic expansion and contraction. Always apply sealant in bead form. After joints have been completely filled, they should be neatly tooled to eliminate air pockets or voids, and to ensure good substrate wetting for optimum adhesion. Dry tooling is recommended and use of solvents or soapy water as tooling agents is discouraged. Do not smear, feather or wipe sealant to a thin consistency or film outside of joint area unless the area has been masked with tape or if it will be painted. Once sealant is dry to touch and does not transfer, remove masking tape.

Cleanup: Uncured sealant may be cleaned with isopropyl alcohol. After curing, excess sealant must be cut or scraped away. Follow solvent vendor's precautions when using solvents.

Titebond WeatherMaster Translucent (#44011), Titebond WeatherMaster Metal Roof Translucent (#61111) and Titebond WeatherMaster Ultimate MP Translucent (#71111) can be cleaned with mineral spirits or similar solvent before cured.

PROTECTION

Protect sealants in joints from damage until fully cured.

Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download