Aero-Duster - Miller-Stephenson Chemical



Epoxy Stripping Agent

For Cured Epoxy Resins-Most Organic Materials

MS-111 (Bulk Liquid)

MS-111 will readily soften and strip most organic systems, such as epoxies and polyurethanes. It will not attack any metal surfaces or valuable parts during the time necessary to remove polymers. Caution: It may darken stainless steel and aluminum.

ADVANTAGES:

• Nonflammable

• Low in viscosity

• Free rinsing in alcohol

• Available in quart and gallon container(s)

PHYSICAL PROPERTIES:

Color……………………...…….Light to dark amber

Boiling point………………………..….. 104ºF/40ºC

Vapor pressure……………340 mmHg @ 68ºF/20ºC

Density……………………....1.25g/cc @ 77ºF/25ºC

Form…………………………….……………Liquid

DIRECTIONS FOR USE:

Vent containers carefully to equalize pressure and pour material carefully at room temperature to avoid splashing and boiling.

Coatings: MS-111 may be applied with a brush containing only non-plastic bristles and handle. When film has lifted, either scrape or rinse with alcohol. A second application will occasionally prove necessary.

Castings: Place object to be stripped in tank, cover with liquid, and allow to stand until plastic has disintegrated or loosened. This will vary from minutes to days depending on casting thickness. Remove with a hook or basket. Flush with clean alcohol.

STORAGE:

MS-111 should be stored at or below room temperature in a glass or polyethylene container, which should be covered tightly to retard evaporation. MS-111 should be used as soon as practicable and not stored for prolonged periods in other than original container or glass. Keep tightly sealed.

Refer to Safety Data Sheet (SDS) before use. For industrial use only.

For technical support:

800-992-2424 (8-4 ET) in the U.S.

800-323-4621 (8-4 ET) in Canada.

e-mail: support@

miller-

1454-9J

-----------------------

miller-

product information

miller-stephenson

The recommendations made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.

CANADA

Miller-Stephenson Chemical Co.,Inc.

280 Belfield Road

Toronto, Ontario M9W 1H6 Canada

416 675-3204 Fax 416 674-2987

CONNECTICUT

Miller-Stephenson Chemical Co.,Inc.

55 Backus Avenue

Danbury, Connecticut 06810 U.S.A.

203 743-4447 Fax 203 791-8702

ILLINOIS

Miller-Stephenson Chemical Co.,Inc.

6348 Oakton Street

Morton Grove, Illinois 60053 U.S.A.

847 966-2022 Fax 847 966-8468

CALIFORNIA

Miller-Stephenson Chemical Co., Inc.

12261 Foothill Boulevard

Sylmar, California 91342 U. S. A.

818 896-4714 Fax 818 896-6086

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download