Ww2.justanswer.com
Top of Form
[pic]
[pic][pic]PATH: Drive Train > Manual Transmission > Adjustments > Clutch Interlock Switch
Clutch Interlock Switch
|[pic] |
|Adjustable type clutch interlock switch |
|Click to Enlarge |
|[pic] |
|Non-adjustable type clutch interlock switch |
|Click to Enlarge |
The clutch interlock switch is used on all truck models, however this switch is adjustable in some models up to 1991. On vehicles after 1991 the switch in non-adjustable. If the switch does not function it must be replaced.
1. Disconnect the negative battery cable.
2. If the adjusting clip is out of position on the rod, remove both halves of the clip.
3. Position both halves of the clip closer to the switch and snap the clips together on the rod.
4. Depress the clutch pedal to the floor to adjust the switch.
5. Connect the negative battery cable.
6. Check switch function by attempting to start the engine without depressing the clutch pedal, the engine should not start. The engine should start when the clutch pedal is depress.
|CAUTION |
|Make sure the transmission is in Neutral and the hand brake is applied when attempting to start the vehicle without the clutch |
|pedal depressed. |
Bottom of Form
[pic]
[pic]
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.