ARCAT, Inc.
SECTION 08 41 00ENTRANCES AND STOREFRONTSDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2010 - 2016 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** NanaWall Systems, Inc.; Opening glass walls, folding glass wall systems, sliding glass wall systems.This section is based on the products of NanaWall Systems, Inc., which is located at:100 Meadowcreek Drive, Suite #250Corte Madera, CA 94925Toll Free Tel: 800-873-5673Tel: 415-383-3148Fax: 415-383-0312Email: info@Web: .NanaWall redefined the category of opening glass wall systems. During our 30 years in business, we have earned the trust of architects, builders, design professionals, and homeowners as a solutions provider for re-imagining how buildings, people and the elements interact. By combining precision engineering and outstanding design options across more than 20 unique systems, we advance design possibilities beyond the conventional for almost any space.
GENERAL
SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
Opening glass walls, entrances and storefronts of the following types:
Wood-framed folding glass wall systems.
Aluminum-framed folding glass wall systems.
Wood-framed single track sliding glass wall systems.
Aluminum-framed single track sliding glass wall systems.
Monumental thermally broken aluminum framed folding glass wall systems
Exterior all-glass aluminum-framed window wall systems.
Interior all-glass aluminum-framed window wall systems.
RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
Section 07 90 00 - Joint Protection.
Section 08 81 13 - Decorative Glass Glazing.
SUBMITTALS
Submit under provisions of Section 01 30 00 - Administrative Requirements.
Product Data: Manufacturer's data sheets on each product to be used, including:
Preparation instructions and recommendations.
Storage and handling requirements and recommendations.
Independently tested data listing performance criteria and Owner's manual including installation instructions and methods.
Product Drawings: Indicate dimensioning, direction of swing, configuration, swing panels, typical head jamb, side jambs and sill details, type of glazing material and handle height.
Provide elevations indicating rough opening requirements and details for field applied components.
Contract Closeout Submittal: Submit Owner's Manual from manufacturer. Identify Owner's Manual with project name, location and completion date, type and size of unit installed.
** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
QUALITY ASSURANCE
Manufacturer: Provide complete, precision built, engineered, pre-fitted unit by a single source manufacturer with at least 15 years experience in providing folding/sliding door systems for large openings in the North American market.
The manufacturer must have a quality system registration per ISO 9001:2008.
The manufacturer must have a environmental management system registration per ISO 1401:2005.
Performance Requirements: Provide from manufacturer that has independently tested typical units. Testing results to include air infiltration in accordance with ASTM E 283, water penetration in accordance with ASTM E 547, structural loading in accordance with ASTM E 330, and forced entry in accordance with AAMA 1303/1304.
** NOTE TO SPECIFIER ** Not available with all model lines. Delete if not applicable to model selected in Part 2 of this section.
Thermal Performance: Unit to comply with the U value, rated, certified, labeled or simulated in accordance with NFRC 100, shown in manufacturer's latest published data for the glazing and sill specified.
** NOTE TO SPECIFIER ** Not available with all model lines. Delete if not applicable to model selected in Part 2 of this section.
Solar Heat Gain Coefficient: Unit to comply with the solar heat gain coefficient, rated, certified, labeled or simulated in accordance with NFRC 200, shown in manufacturer's latest published data for the glazing specified.
Installer Qualifications:
Installer experienced in the installation of manufacturer's products or other similar products for large openings.
Installer to provide reference list of at least 3 projects of similar scale and complexity successfully completed in the last 3 years.
Provide project names, locations, completion dates, names and telephone numbers of General Contractor and Owner's contact person.
** NOTE TO SPECIFIER ** Delete if longer warranty is not required.
Installer certified by manufacturer.
DELIVERY, STORAGE, AND HANDLING
Deliver materials to job site in sealed, unopened cartons or crates. Protect units from damage. Store material under cover, protected from weather and construction activities.
Store products in manufacturer's unopened packaging until ready for installation. Store flat in dry, well ventilated area out of direct sunlight.
** NOTE TO SPECIFIER ** Delete the following paragraph if specifying system with no wood components.
Condition wood components to average prevailing relative humidity before installation. Do not subject wood components to extreme nor rapid changes in heat or humidity.
PROJECT CONDITIONS
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
WARRANTY
Warranty: Provide manufacturer's standard warranty against defects in materials and workmanship and as follows:
Roller: Ten years.
Seal Failure of Insulated Glazing: Ten years.
Components (excluding rollers and seal of insulated glazing): One year from date of delivery by manufacturer.
** NOTE TO SPECIFIER ** Delete the following option unless specifying manufacturer certified installer in Article for Quality Assurance. When certified installer is used, two year warranty is available.
Components (excluding rollers and seal of insulated glazing): Two years from date of delivery by manufacturer.
PRODUCTS
MANUFACTURERS
Acceptable Manufacturer: NanaWall Systems , which is located at: 100 Meadowcreek Dr. Suite 250; Corte Madera, CA 94925; Toll Free Tel: 800-873-5673; Tel: 415-383-3148; Fax: 415-383-0312; Email: request info (khadija@); Web:
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
Substitutions: Not permitted.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
** NOTE TO SPECIFIER ** Delete article if not required.
WOOD FRAMED FOLDING GLASS WALL SYSTEMS
Wood Framed Glass Wall System Construction - General:
Construction: Wood panels to include close tolerance mortise and tenon, glued and pinned corners.
Frame and Panels: From manufacturer's standard profiles, provide head jamb, side jambs, and panels with dimensions shown on the Drawings.
Weatherstripping: Provide manufacturer's standard double layer EPDM or brush seals with a two layer polyamide fin at both the inner and outer edge of door panels or on frame for sealing between panels and between panel and frame.
Sizes and Configurations: Refer to the Drawings for selected custom dimensions within maximum frame sizes possible as indicated in manufacturer's literature. Refer to the Drawings for selected number of panels and configuration.
Sliding/Folding Hardware:
Provide manufacturer's standard combination sliding and folding hardware with top, bottom tracks and threshold.
All running carriages to be with sealed, self-lubrication, ball bearing multi-rollers.
** NOTE TO SPECIFIER ** Delete mounting position option not required.
Mounting Position: For each pair of folding panels, provide cardanic, independently suspended, four wheeled coated with fiberglass reinforced polyamide upper running carriage and lower guide carriage.
** NOTE TO SPECIFIER ** WD66/u and WA67/u unit configuration only. Delete if not required.
Mounting Position: For floor mounted system provide upper guide carriage and lower running carriage with four vertical stainless steel wheels and two horizontal wheels. The vertical wheels to ride on Type 304 stainless steel guide track covers over the full length of sill track. Carrying capacity of lower running carriage to be 440 lbs (200 kg).
** NOTE TO SPECIFIER ** Delete lite and mullion options not required.
Lites and Mullions: Panels with one lite configuration.
Lites and Mullions: Panels with horizontal mullions at specified heights from the bottom of the panel.
Lites and Mullions: Panels with simulated divided lites in pattern as shown on the Drawings.
** NOTE TO SPECIFIER ** Delete stile and rail width not required or delete all. Not available on WA 67.
Stile and Rail : 3-1/16 in (78 mm).
Stile and Rail Width: 3-3/4 in (95 mm).
Stile and Rail Width: 4-3/4 in (120 mm).
Stile and Rail Width: As selected by Architect from manufacturer's options.
Stile and Rail Width: As indicated on the Drawings.
** NOTE TO SPECIFIER ** The following option is only available for WD65 units without a swing panel. Delete if not required.
Stile and Rail Width: 2-5/8 in (66 mm).
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs with bottom rail and kickplate option not required.
Provide standard bottom rail.
Provide manufacturer's standard kickplate.
** NOTE TO SPECIFIER ** Delete kickplate height options not required.
Height: As selected by Architect from manufacturer's options.
Height: As indicated on the Drawings.
** NOTE TO SPECIFIER ** Fill in blank below with a value from 5 to 12 in (127 mm to 305 mm).
Height: ____.
Wood: Solid, three layer, cross-grained, kiln dried.
** NOTE TO SPECIFIER ** Delete wood species options not required.
Wood Species: Douglas fir.
Wood Species: European pine.
Wood Species: Meranti.
Wood Species: Western hemlock.
Wood Species: Spruce.
Wood Species: European oak.
Wood Species: Sapeli mahogany.
Wood Species; interior applications: Cherry.
Wood Species, interior applications: Maple.
Wood Species; interior applications: Beech.
Wood Species: As indicated on the Drawings.
Wood Species: As selected by Architect from manufacturer's options.
** NOTE TO SPECIFIER ** Before installation, the unit must be field finished with at least two coats for a final protected finish. Delete wood finish options not required.
Wood Finish: Finish to be water based, opened pored clear sand sealed for stain.
Wood Finish: Standard primed for paint.
Wood Finish: As indicated on the Drawings.
Wood Finish: As selected by Architect from manufacturer's options.
** NOTE TO SPECIFIER ** The following four wood finishes are for WA67 and interior applications only for WD65 and WD66. Delete if not required.
Wood Finish: Clear sand sealed and one additional clear coat.
Wood Finish: Pigmented No. 410 with one additional coat.
Wood Finish: Pigmented No. 510 with one additional coat.
Wood Finish: Selected from range of RAL finishes from manufacturer with one additional coat.
Wood Finish: As indicated on the Drawings.
Wood Finish: As selected from manufacturer's options.
Aluminum Extrusions:
Extrusions with nominal thickness of .078 in (2.0 mm).
Alloy specified as AIMgSi0.5 with strength rated as 6063-T5 or F-22 (European standard).
Anodized conforming to AAMA 611or powder coated conforming to AAMA 2603.02.
** NOTE TO SPECIFIER ** Delete if not required.
Model WD65: Wood framed glass wall systems as manufactured by Nanawall Systems, Inc.
Fabrication: Use solid, three layer, cross grained frame and panel profiles with hinges, sliding and folding hardware, locking hardware and handles, threshold and track, glass and glazing and weatherstripping as specified herein to make a folding glass wall. Factory pre-assembled as is standard for manufacturer and ship with all components and installation instructions.
** NOTE TO SPECIFIER ** Delete System operation option not required.
System Operation: Folding panel system.
System Operation: Paired panel system.
** NOTE TO SPECIFIER ** Delete panel operation options not required.
Panel Operation: Inward opening unit.
Panel Operation: Outward opening unit.
Panel Operation: Center pivoted unit.
Panel Operation: Inward/outward combination opening unit.
Panel Operation: FoldFlat, against wall, full 180 degrees movement of door panel stack
Panel Operation: As indicated on Drawings.
** NOTE TO SPECIFIER ** Delete swing/stack direction option not required.
Swing/Stacking Direction: On configurations with a pair of swing panels, looking from inside, primary swing panel on the left.
Swing/Stacking Direction: On configurations with a pair of swing panels, looking from inside, primary swing panel on the right.
** NOTE TO SPECIFIER ** Delete hinge options not required.
Hinges: Provide manufacturer's standard clear anodized aluminum hinges. Provide stainless steel hinge pins.
Hinges: Provide manufacturer's dark bronze anodized aluminum hinges. Provide stainless steel hinge pins.
Hinges: As indicated on the Drawings.
Hinges: As selected by Architect from manufacturer's full range of standard available options.
Adjustment: Provide folding/sliding hardware capable of specified amount of compensation and adjustments without needing to remove panels from tracks.
** NOTE TO SPECIFIER ** Delete aluminum threshold options not required.
Aluminum Thresholds: Clear anodized standard sill
Aluminum Thresholds: Dark bronze anodized standard sill.
Aluminum Thresholds: Clear anodized flush sill.
Aluminum Thresholds: Dark bronze anodized flush sill.
Aluminum Thresholds: Clear anodized low profile saddle sill.
Aluminum Thresholds: Dark bronze anodized low profile saddle sill.
Aluminum Thresholds: As indicated on the Drawings.
Aluminum Thresholds: As selected by Architect from manufacturer's options.
Glass: As selected by Architect from manufacturer's options.
** NOTE TO SPECIFIER ** Delete if not required.
Model WD66: Wood framed folding glass wall systems as manufactured by Nanawall Systems, Inc.
Fabrication: Use solid, three layer, cross grained frame and panel profiles with hinges, sliding and folding hardware, locking hardware and handles, threshold and track, glass and glazing and weatherstripping as specified herein to make a folding glass wall. Factory pre-assembled as is standard for manufacturer and ship with all components and installation instructions.
** NOTE TO SPECIFIER ** Delete panel operation options not required.
Panel Operation: Inward opening unit.
Panel Operation: Outward opening unit.
Panel Operation: As indicated on Drawings.
** NOTE TO SPECIFIER ** Delete swing/stack direction option not required.
Swing/Stacking Direction: On configurations with a pair of swing panels, looking from inside, primary swing panel on the left.
Swing/Stacking Direction: On configurations with a pair of swing panels, looking from inside, primary swing panel on the right.
Hinges: Provide manufacturer's aluminum hinges and spline on edge of panel. For structural strength, hinges to be connected to spline and not directly into wood. Provide stainless steel security hinge pins with set screws.
** NOTE TO SPECIFIER ** Delete finish options not required.
Finish: Standard clear anodized.
Finish: Dark bronze anodized.
Finish: As indicated on the Drawings.
Finish: As selected by Architect from manufacturer's options.
Adjustment: Provide folding/sliding hardware capable of specified amount of compensation and adjustments without needing to remove panels from tracks, in width, 1/8 in (3 mm) per hinge and in height, 1/4 in (6 mm) up and down.
** NOTE TO SPECIFIER ** Delete aluminum threshold options not required.
Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide clear anodized raised sill.
Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide dark bronze anodized raised sill.
Aluminum Thresholds: Clear anodized flush sill.
Aluminum Thresholds: Dark bronze anodized flush sill.
** NOTE TO SPECIFIER ** The following two options are not available with the floor mounted WD66/u Delete if not required.
Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide clear anodized low profile saddle sill.
Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide dark bronze anodized low profile saddle sill.
Aluminum Thresholds: As indicated on the Drawings.
Aluminum Thresholds: As selected by Architect from manufacturer's options.
Glass: As selected by Architect from manufacturer's options.
** NOTE TO SPECIFIER ** Aluminum Clad Wood Folding Glass Wall Systems. Delete if not required.
Model WA67: Aluminum clad wood folding glass wall systems as manufactured by Nanawall Systems, Inc.
Fabrication: Use solid, three layer, cross grained frame and panel profiles connected to exterior aluminum extrusion, hinges and splines, sliding and folding hardware, locking hardware and handles, threshold and track, glass and glazing and weatherstripping as specified herein to make a folding glass wall. Factory pre-assembled as is standard for manufacturer and ship with all components and installation instructions.
** NOTE TO SPECIFIER ** Delete panel operation options not required.
Panel Operation: Inward opening unit.
Panel Operation: Outward opening unit.
Panel Operation: As indicated on the Drawings.
** NOTE TO SPECIFIER ** Delete swing/stack direction option not required.
Swing/Stacking Direction: On configurations with a pair of swing panels or with even pair stacking to both sides, looking from inside, primary swing panel on the left.
Swing/Stacking Direction: On configurations with a pair of swing panels or with even pair stacking to both sides, looking from inside, primary swing panel on the right.
Hinges: Provide manufacturer's aluminum hinges and spline on edge of panel. For structural strength, hinges to be connected to spline and not directly into wood. Provide stainless steel security hinge pins with set screws.
** NOTE TO SPECIFIER ** Delete finish option for hinges not required.
Finish: Standard clear anodized.
Finish: Dark bronze anodized.
Finish: As indicated on the Drawings.
Finish: As selected by Architect from manufacturer's options.
Adjustment: Folding/sliding hardware capable of specified amount of compensation and adjustments without needing to remove panels from tracks, in width, 1/8 in (3 mm) per hinge and in height, 1/4 in (6 mm) up and down.
** NOTE TO SPECIFIER ** Before installation, the unit must be field finished with at least two coats for a final protected finish. Delete wood finish options not required.
Exterior Aluminum Extrusions: Attached to interior wood with manufacturer's thermal isolating polyamide connectors protecting and isolating wood from aluminum using the back ventilated, rain screen principle.
** NOTE TO SPECIFIER ** Delete aluminum finishes not required.
Aluminum Finish: Dark bronze anodized.
Aluminum Finish: Clear anodized.
Aluminum Finish: Powder coated, white RAL 9016.
Aluminum Finish: Powder coated, RAL high gloss finish, standard color as selected.
Aluminum Finish: Powder coated, RAL matte finish, standard color as selected.
Aluminum Finish: Custom finish as selected.
** NOTE TO SPECIFIER ** Delete aluminum threshold options not required.
Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide clear anodized raised sill.
Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide dark bronze anodized raised sill.
Aluminum Thresholds: Clear anodized flush sill.
Aluminum Thresholds: Dark bronze anodized flush sill.
** NOTE TO SPECIFIER ** The following two options are not available with the floor mounted WA67/u Delete if not required.
Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide clear anodized low profile saddle sill.
Aluminum Thresholds: Thermally broken with 3/4 in (19 mm) polyamide dark bronze anodized low profile saddle sill.
Aluminum Thresholds: As indicated on the Drawings.
Aluminum Thresholds: As selected by Architect from manufacturer's options.
Glass: As selected by Architect from manufacturer's options.
** NOTE TO SPECIFIER ** Delete if not required.
ALUMINUM-FRAMED FOLDING GLASS WALL SYSTEMS
** NOTE TO SPECIFIER ** Delete if not required.
Aluminum Construction:
Frame and Panels: From manufacturer's standard profiles, provide head jamb, side jambs, and panels with dimensions shown on the Drawings.
Weatherstripping: Provide manufacturer's standard double layer EPDM or brush seals with a two layer polyamide fin at both the inner and outer edge of door panels or on frame for sealing between panels and between panel and frame.
Fabrication: Use extruded aluminum frame and panel profiles with corner connectors and hinges, sliding and folding hardware, locking hardware and handles, glass and glazing and weatherstripping as specified herein to make a folding glass wall. Factory pre-assembled as is standard for manufacturer and ship with all components and installation instructions.
Adjustment: Provide system capable of specified amount of adjustments without removing panels from tracks.
** NOTE TO SPECIFIER ** Delete lite and mullion options not required.
Lite and Mullion: Panels with standard one lite configuration.
Lite and Mullion: Panels with horizontal mullions at specified heights from the bottom of the panel.
Lite and Mullion: Provide panels with simulated divided lites in pattern as shown on the Drawings.
** NOTE TO SPECIFIER ** Delete the bottom rail and kickplate option not required or keep both.
Provide standard bottom rail.
** NOTE TO SPECIFIER ** SL45 and SL70 only. Delete if option not required.
Provide manufacturer's standard kickplate.
** NOTE TO SPECIFIER ** Delete kickplate height options not required.
Kickplate Height: As selected by Architect from manufacturer's options.
Kickplate Height: As indicated on the Drawings.
** NOTE TO SPECIFIER ** If specifying kickplate option below, the height a value can be from 5 to 12 in (127 to 305 mm). Delete if not required.
Kickplate Height (in / mm): ______.
Glass: As selected by Architect from manufacturer's options.
** NOTE TO SPECIFIER ** Delete if not required.
Model SL45: Monumental aluminum wall systems as manufactured by Nanawall Systems, Inc.
** NOTE TO SPECIFIER ** Delete system operations not required.
System Operation: Folding panel system.
System Operation: Paired panel system.
** NOTE TO SPECIFIER ** Delete panel operations not required.
Panel Operation: Inward opening unit.
Panel Operation: Outward opening unit.
Panel Operation: Center pivoted unit.
Panel Operation: Inward and outward combination opening unit.
Panel Operation: Fold flat against wall, full 180 degrees movement of door panel stack
Panel Operation: As indicated on the Drawings.
** NOTE TO SPECIFIER ** Delete swing/stack direction option not required.
Swing/Stacking Direction: On configurations with a pair of swing panels, looking from inside, primary swing panel on the left.
Swing/Stacking Direction: On configurations with a pair of swing panels, looking from inside, primary swing panel on the right.
Aluminum Extrusions: .078 in (2.0 mm) nominal thickness.
Alloy specified as AIMgSi0.5 with strength rated as 6063-T5 or F-22 (European standard).
** NOTE TO SPECIFIER ** Delete aluminum finishes not required.
Aluminum Finish Standard, Anodizing: AAMA 611.
Aluminum Finish Standard, Powder Coating: AAMA 2603.
Aluminum Finish Standard, Powder Coating: AAMA 2604.
Aluminum Finish Standard, Powder Coating: AAMA 2605.
** NOTE TO SPECIFIER ** Delete aluminum finish options not required.
Aluminum Finish: Dark bronze anodized.
Aluminum Finish: Clear anodized.
Aluminum Finish: Powder coated, white RAL 9016.
Aluminum Finish: Powder coated, RAL high gloss finish, standard color as selected.
Aluminum Finish: Powder coated, RAL matte finish, standard color as selected.
Aluminum Finish: PVDF kynar finish, standard color as selected.
Aluminum Finish: Wood grain, standard pattern as selected.
Aluminum Finish: Custom finish as selected.
** NOTE TO SPECIFIER ** Delete hinge options not required.
Hinges: Manufacturer's standard zinc die cast powder coated hinges that are closest to match to finish of frame and panels.
Hinges: Stainless steel security hinge pins with set screws.
Hinges: Stainless steel hinges.
Hinges: As indicated on the Drawings.
Hinges: As selected by Architect from manufacturer's options.
Screws: Stainless steel, for connecting frame components.
** NOTE TO SPECIFIER ** Delete aluminum threshold options not required.
Aluminum Thresholds: Clear anodized standard sill.
Aluminum Thresholds: Dark bronze anodized standard sill.
Aluminum Thresholds: Clear anodized flush sill.
Aluminum Thresholds: Dark bronze anodized flush sill.
Aluminum Thresholds: Clear anodized low profile saddle sill.
Aluminum Thresholds: Dark bronze anodized low profile saddle sill.
Aluminum Thresholds: As indicated on the Drawings.
Aluminum Thresholds: As selected by Architect from manufacturer's options.
** NOTE TO SPECIFIER ** Delete if not required.
Model SL60: Aluminum folding glass wall systems as manufactured by Nanawall Systems, Inc.
** NOTE TO SPECIFIER ** Delete panel operation not required.
Single Panel Operation: Inward opening unit.
Single Panel Operation: Outward opening unit.
Single Panel Operation: As indicated on the Drawings.
Single Panel Operation: As indicated on Drawings.
** NOTE TO SPECIFIER ** Delete swing/stack direction option not required.
Swing/Stacking Direction: On configurations with a pair of swing panels, looking from inside, primary swing panel on the left.
Swing/Stacking Direction: On configurations with a pair of swing panels, looking from inside, primary swing panel on the right.
Aluminum Extrusions: 0.078 in (2.0 mm) nominal thickness.
Thermally broken with polyamide plastic reinforced with glass fibers.
Alloy specified as AIMgSi0.5 with strength rated as 6063-T5 or F-22 (European standard).
** NOTE TO SPECIFIER ** Delete aluminum finish standards not required.
Aluminum Finish Standard, Anodizing: AAMA 611.
Aluminum Finish Standard, Powder Coating: AAMA 2603.
Aluminum Finish Standard, Powder Coating: AAMA 2604.
Aluminum Finish Standard, Powder Coating: AAMA 2605.
** NOTE TO SPECIFIER ** Delete interior aluminum finishes not required.
Interior Aluminum Finish: Dark bronze anodized,
Interior Aluminum Finish: Clear anodized.
Interior Aluminum Finish: White powder coated, RAL 9016.
Interior Aluminum Finish: Dark brown powder coated, RAL 8077.
Interior Aluminum Finish: Silver Gray powder coated, RAL 9006.
Interior Aluminum Finish: Powder coated, RAL high gloss finish, standard color as selected.
Interior Aluminum Finish: Powder coated, RAL matte finish, standard color as selected.
Interior Aluminum Finish: Custom finish as selected.
** NOTE TO SPECIFIER ** Delete exterior aluminum finishes not required. Dual color options are only available with powder coated finishes.
Exterior Aluminum Finish: To match interior finish specified herein.
Exterior Aluminum Finish: White powder coated, RAL 9016.
Exterior Aluminum Finish: Dark brown powder coated, RAL 8077.
Exterior Aluminum Finish: Silver Gray powder coated, RAL 9006.
Exterior Aluminum Finish: Powder coated, RAL high gloss finish, standard color as selected.
Exterior Aluminum Finish: Powder coated, RAL matte finish, standard color as selected.
Exterior Aluminum Finish: Custom finish as selected.
Sliding and Folding System: Manufacturer's standard combination sliding and folding hardware with top, bottom tracks and threshold.
Running carriages: Sealed, self-lubrication, ball bearing multi-rollers.
Surface mounted hinges and running carriages will not be allowed.
Weight of panels borne by the bottom of the track will not be allowed.
** NOTE TO SPECIFIER ** Delete mounting not required.
Mounting: For top hung system SL60/o, provide cardanic, independently suspended, four wheeled coated with fiber glass reinforced polyamide upper running carriage and lower guide carriage. Running carriage to be adjustable in height, 1/4 in (6 mm) up and down.
Mounting: For floor mounted system SL60/u, provide upper guide carriage and lower running carriage with two vertical stainless steel wheels and two horizontal wheels. The vertical wheels to ride on Type 304 stainless steel guide track covers over the full length of sill track and lie above the water run-off level. Carrying capacity of lower running carriage to be 440 lbs (200 kg).
** NOTE TO SPECIFIER ** Corner connectors are only available in powder coated finishes. If anodized panel and frame finishes are selected, there may be aesthetic issues.
Corner Fittings: On all four corners of panels, thermally broken, die cast zinc multi-functional corner fittings with carriage connectors, hinges and hinge pins as required. Finish: Powder coated, closest match to finish of frame and panels.
Fasteners: Tapered pins or machine screws for connecting frame components.
** NOTE TO SPECIFIER ** Delete options not required.
Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm) polyamide raised sill in finish to match panel finish specified herein.
Aluminum Thresholds: Provide aluminum clear anodized flush sill.
Aluminum Thresholds: Provide aluminum dark bronze anodized flush sill.
Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm) polyamide clear anodized low profile saddle sill.
Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm) polyamide dark bronze anodized low profile saddle sill.
Aluminum Thresholds: As indicated on the Drawings.
Aluminum Thresholds: As selected by Architect from manufacturer's options.
** NOTE TO SPECIFIER ** Delete if not required.
Model SL70: Aluminum folding glass wall systems as manufactured by Nanawall Systems, Inc.
Adjustment: Provide folding/sliding hardware capable of specified amount of compensation and adjustments without needing to remove panels from tracks, in width, 1/16 in (1.5 mm) per hinge and in height, 1/16 in (2 mm) up and down.
** NOTE TO SPECIFIER ** Delete single panel operations not required.
Single Panel Operation: Inward opening unit.
Single Panel Operation: Outward opening unit.
Single Panel Operation: As indicated on the Drawings.
** NOTE TO SPECIFIER ** Delete swing/stack direction option not required.
Swing/Stacking Direction: On configurations with a pair of swing panels, looking from inside, primary swing panel on the left.
Swing/Stacking Direction: On configurations with a pair of swing panels, looking from inside, primary swing panel on the right.
Aluminum Extrusions: 0.078 in (2.0 mm) nominal thickness.
Thermally broken with a 3/4 to 15/16 in (20 to 24 mm) wide polyamide plastic reinforced with glass fibers.
Alloy specified as AIMgSi0.5 with strength rated as 6063-T5 or F-22 (European standard).
** NOTE TO SPECIFIER ** Delete aluminum finish standards not required.
Aluminum Finish Standard, Anodizing: AAMA 611.
Aluminum Finish Standard, Powder Coating: AAMA 2603.
Aluminum Finish Standard, Powder Coating: AAMA 2604.
Aluminum Finish Standard, Powder Coating: AAMA 2605.
** NOTE TO SPECIFIER ** Delete interior aluminum finishes not required.
Interior Aluminum Finish: Dark bronze anodized,
Interior Aluminum Finish: Clear anodized.
Interior Aluminum Finish: White powder coated, RAL 9016.
Interior Aluminum Finish: Powder coated, RAL high gloss finish, standard color as selected.
Interior Aluminum Finish: Powder coated, RAL matte finish, standard color as selected.
Interior Aluminum Finish: PVDF kynar finish, standard color as selected.
Interior Aluminum Finish: Wood grain, standard pattern as selected.
Interior Aluminum Finish: Custom finish as selected.
** NOTE TO SPECIFIER ** Delete exterior aluminum finishes not required. Note that dual color options are only available with powdercoated finishes.
Exterior Aluminum Finish: Match interior finish specified herein.
Exterior Aluminum Finish: White powder coated, RAL 9016.
Exterior Aluminum Finish: Powder coated, RAL high gloss finish, standard color as selected.
Exterior Aluminum Finish: Powder coated, RAL matte finish, standard color as selected.
Exterior Aluminum Finish: PVDF kynar finish, standard color as selected.
Exterior Aluminum Finish: Wood grain, standard pattern as selected.
Exterior Aluminum Finish: Custom finish as selected.
Sliding/Folding System: Manufacturer's standard combination sliding and folding hardware with top, bottom tracks and threshold.
Running carriages to be with sealed, self-lubrication, ball bearing multi-rollers.
Surface mounted hinges and running carriages will not be allowed.
Weight of panels borne by the bottom of the track will not be allowed.
Mounting: Provide upper guide carriage and lower running carriage with four vertical stainless steel wheels and two horizontal polyamide plastic wheels. The vertical wheels to ride on top of sill track and lie above the water run-off level. Carrying capacity of lower running carriage to be 440 lbs (200 kg).
** NOTE TO SPECIFIER ** Delete aluminum threshold options not required.
Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm) polyamide raised sill in finish to match panel finish specified herein.
Aluminum Thresholds: Provide aluminum clear anodized flush sill.
Aluminum Thresholds: Provide aluminum dark bronze anodized flush sill.
Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm) polyamide clear anodized low profile saddle sill.
Aluminum Thresholds: Provide aluminum thermally broken with 3/4 in (19 mm) polyamide dark bronze anodized low profile saddle sill.
Aluminum Thresholds: As indicated on the Drawings.
Aluminum Thresholds: As selected from manufacturer's full range of standard available options.
** NOTE TO SPECIFIER ** Delete hinge options not required.
Hinges: Zinc die cast with finish closest match to finish of frame and panels. Provide stainless steel security hinge pins with set screws.
Hinges: Stainless steel hinges. Provide stainless steel security hinge pins with set screws.
Hinges: As indicated on the Drawings.
Hinges: As selected by Architect from manufacturer's options.
Fasteners: Tapered pins or stainless screws for connecting frame components.
** NOTE TO SPECIFIER ** WD65, WD66, WA67, SL45, SL60 and SL70 models.
Folding Door Hardware:
** NOTE TO SPECIFIER ** Delete keying option not required.
Keying: For applications with multiple units, all keyed alike.
Keying: For applications with multiple units, all keyed independently.
** NOTE TO SPECIFIER ** Delete handle finish option for handles not required.
Handle Finish: Stainless steel handles in a titanium black finish.
Handle Finish: Stainless steel handles in a brushed satin finish.
** NOTE TO SPECIFIER ** Delete locking hardware and handles on main entry panels not required. Other compatible handle styles and finishes are available from other suppliers.Dummy handles on secondary swing panel not available for SL45.
Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel(s), provide manufacturer's standard lever handles on the inside and outside, a Schlage compatible lock set with lockable latch, multi-point locking with a dead bolt and rods at the top and bottom on primary panel only. Rods to be concealed and not edge mounted. Depression of handles withdraws latch. Lifting of handles engages rods and turn of key or thumb turn engages deadbolt and operates lock. On the secondary swing panel, provide dummy handles and concealed flush bolts that operate the rods at the top and the bottom for the secondary swing panel.
** NOTE TO SPECIFIER ** WD65, WD66, WA67, SL45 and SL70 only.
Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, provide manufacturer's push/pull handles with separate lock set and dead bolt.
** NOTE TO SPECIFIER ** Delete push-pull handles not required.
Push-Pull Handles: Brown nylon finish.
Push-Pull Handles: Gray nylon finish
** NOTE TO SPECIFIER ** White finish not available for WD65, WD6 and WA67. Delete if not required.
Push-Pull Handles: White nylon finish
** NOTE TO SPECIFIER ** WD65, WD66, WA67, SL45 and SL70 only. The following option is recommended with a door closer. In order to slide the swing panel, the door closer will need to be disengaged if the swing panel is not attached to a side jamb.
Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, no hardware or locking to be provided by the manufacturer, but with field installed panic device by others.
Locking Hardware and Handles, Main Entry Panels: On both entry panels for models with a pair of swing panels, no hardware or locking to be provided by the manufacturer, but with field installed panic devices on both panels by others.
Locking Hardware and Handles, Main Entry Panels: On main entry pair of panels on inswing models without a swing panel, provide manufacturer's standard handle on the inside and on the outside and lock set with profile cylinder. Operation of lock set is by turn of key from the outside and with a thumbturn from the inside with a two point locking hardware operated by 180 degree turn of the handle.
** NOTE TO SPECIFIER ** WD65, WD66, WA67, SL45, SL60. Key operation from the inside may not meet egress requirements.
Locking Hardware and Handles, Main Entry Panels: On main entry pair of panels on outswing models without a swing panel, provide manufacturer's standard handle on the inside and on the outside and a lock set with a profile cylinder. Operation of lock set is by turn of key from the outside and from the inside with a two point locking hardware operated by 180 degree turn of the handle.
** NOTE TO SPECIFIER ** SL70.
Locking Hardware and Handles, Main Entry Panels: On main entry pair of panels on outswing models without a swing panel, provide manufacturer's standard handle on the inside and on the outside and lock set with profile cylinder. Operation of lock set is by turn of key from the outside and with a thumbturn from the inside with a two point locking hardware operated by 180 degree turn of the handle.
** NOTE TO SPECIFIER ** With this option, the main entry panel is operable from inside only and that there is no latch.
Locking Hardware and Handles, Main Entry Panels: On main entry panel, provide manufacturer's standard handle on inside only with concealed two point locking hardware operated by 180 degree turn of handle.
** NOTE TO SPECIFIER ** Delete if not required.
Aluminum Locking Rods: Rods to have a stroke of 15/16 in (24 mm).
** NOTE TO SPECIFIER ** Delete end caps option not required.
End Caps: Fiber glass reinforced polyamide end caps on top and bottom.
End Caps: Fiberglass reinforced to meet structural loading requirements of application on top and bottom.
** NOTE TO SPECIFIER ** Delete locking hardware and handles on secondary panels not required.
Locking Hardware and Handles, Secondary Panels: On all other secondary panels, provide manufacturer's standard handles and concealed two point locking hardware operated by 180 degree turn of handle. Face applied flush bolt locking will not be allowed.
Locking Hardware and Handles, Secondary Panels: On all other secondary panels, provide manufacturer's removable custodial handles and concealed two point locking hardware operated by 180 degree turn of handle. Face applied flush bolt locking will not be allowed.
** NOTE TO SPECIFIER ** Delete handle height option not required. Fill in blank as required.
Handle Height: Centered at 41-3/8 in (1050 mm) from bottom of panel.
Handle Height (in / mm): Centered at _____ from bottom of panel.
** NOTE TO SPECIFIER ** Delete if not required.
MONUMENTAL THERMALLY BROKEN ALUMINUM FRAMED FOLDING GLASS WALL SYSTEMS
Design Criteria:
Sizes and Configurations: As indicated by the Drawings for selected number and size of panels, location of swing panels, and location of tracks and stacking bays.
** NOTE TO SPECIFIER ** SL 80 panel profile options only. Delete profile not required.
Panel Profile: Rounded (SL80).
Panel Profile: Square (SL81).
** NOTE TO SPECIFIER ** SL 82 available in inswing operation only. Delete unit operation not required.
Unit Operation: Inswing type.
Unit Operation: Outswing type.
Panel Type: Primary swing panel of paired swing panels as indicated.
Entry/Egress panel hinged to side jamb. Location as indicated on drawings.
** NOTE TO SPECIFIER ** SL 73 maximum panel sizes are 10 ft (3.048 m) high and 38 in (965 mm) wide with 27 in (686 mm) the minimum panel width. SL80 and SL81 maximum panel sizes are 10 ft (3.048 m) high and 38 in (965 mm) wide. SL 82 maximum panel sizes are 98 in (2.489 m) high and 39 in (1 m) wide and with a 31 in (787 mm) minimum width.
Panel Size (W x H): As indicated.
Panel Pairing Configuration: Number of panels ganged and attached to each jamb as indicated.
** NOTE TO SPECIFIER ** See manufacturer drawings for selected custom dimensions within maximum frame sizes possible as indicated in manufacturer's literature. See drawings for selected number of panels and configuration. Delete panel configurations not required.
Panel Configuration: Straight.
** NOTE TO SPECIFIER ** SL80, SL81 and SL82 only. Delete if not required.
Panel Configuration: Segmented curve.
** NOTE TO SPECIFIER ** SL80, SL81 and SL82 only. Delete if not required.
Panel Configuration: 90 degree angle turn.
** NOTE TO SPECIFIER ** SL80 , SL81 and SL82 only. Delete if not required.
Panel Configuration: 135 degree angle turn.
** NOTE TO SPECIFIER ** SL 82 only available in inside jamb stacking. Delete stack storage configuration not required.
Stack Storage Configuration: Inside jamb.
Stack Storage Configuration: Outside jamb.
** NOTE TO SPECIFIER ** Contact NanaWall for availability of many commercial glass and glazing types.
Vision Glass:
Safety Glazing: In compliance with ANSI Z97.1 and CPSC 16CFR 1201.
** NOTE TO SPECIFIER ** For storefront units requiring acoustic performance keep the following paragraph. Edit to suit project conditions. Acoustical ratings are for the glass only and not the full panel system but will most likely be within 2 dB of the glass STC rating when the frame is added. Delete if not required.
Acoustical Glass:
Glass Acoustical Performance (ASTM E413 and ASTM E1332): STC.
** NOTE TO SPECIFIER ** Delete if not required.
Model SL73: Aluminum folding glass wall systems as manufactured by Nanawall Systems, Inc.
Floor mounted track supported sliding-folding thermally broken aluminum-framed glass panel system.
Frame: 2-5/16 in (58 mm) wide narrow stile frame, bottom-supported system. Manufacturer's standard or post reinforced frame and panel profiles, with head track, side jambs and panels with dimensions as shown on Drawings.
** NOTE TO SPECIFIER ** Single lite is standard. Refer to manufacturer's size chart for glass panel sizes requiring the use of horizontal mullions.
Panels with single lite.
Rail Depth: 2-3/4 in (70 mm).
Head Width - Inward Opening: 3-15/16 in (101 mm).
Head Width - Outward Opening: 3-7/8 in (99 mm).
Head and Jamb Rail Width: 2-1/4 in (57 mm).
** NOTE TO SPECIFIER ** Delete bottom rail width not required.
Bottom Rail Width: 3-15/16 in (101 mm) overall with 2-1/4 (57 mm) rail for raised sill.
Bottom Rail Width: 2-5/16 in (58 mm) for low-profile saddle sill.
Bottom Rail Width: Manufacturer's standard kickplate.
** NOTE TO SPECIFIER ** Indicate kickplate height. Select height between 6 and 12 in (152 and 305 mm) high.
Kickplate Height (in / mm): ______.
** NOTE TO SPECIFIER ** Edit for weeps. It is expected that the installed system's performance would be not more than 2/3rds of the following certified laboratory test data in accordance with AAMA 503.** NOTE TO SPECIFIER ** Delete performance criteria options not required.
Performance Criteria (Lab Tested): Low Profile Saddle Sill - Inward Opening.
Air Infiltration (ASTM E283) Inward Opening: 0.10 cfm/ft2 (0.51 L/s/m2) at a static air pressure difference: of 1.57 psf (75 Pa).
** NOTE TO SPECIFIER ** Delete weep option not required.
Without Weeps: 0.26 cfm/ft2 (1.33 L/s/m2) at 6.24 psf (300 Pa).
With Weeps: 0.31 cfm/ft2 (1.59 L/s/m2) at 6.24 psf (300 Pa).
Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at a static (with weeps) test pressure of 5.25 psf (250 Pa).
Structural Load Deflection (TAS 202 / ASTM E330):
** NOTE TO SPECIFIER ** Delete design pressure not required.
Design Pressure: DP-40.
Design Pressure: DP-45.
Inward Opening (Standard Unit): Pass.
Design Pressure Positive: 70 psf (3350 Pa).
Design Pressure Negative: 70 psf (3350 Pa).
Windload Resistance: Pass; plus or minus 70 psf (3350 Pa).
Missile Impact & Cycling (TAS 201 and 203; ASTM E1886 and ASTM E1996) with 7/16 in single glazing or 1-1/8 in IGU Impact Glass:
Inward Opening (Standard Unit): Pass.
Design Pressure Positive: 90 psf (4300 Pa).
Design Pressure Negative: 90 psf (4300 Pa).
Performance Criteria (Lab Tested): Low Profile Saddle Sill - Outward Opening.
Air Infiltration (ASTM E283) Outward Opening: 0.11 cfm/ft2 (0.56 L/s/m2) at a static air pressure difference: of 1.57 psf (75 Pa).
** NOTE TO SPECIFIER ** Delete weep option not required.
Without Weeps: 0.29 cfm/ft2 (1.49 L/s/m2) at 6.24 psf (300 Pa).
With Weeps: 0.32 cfm/ft2 (1.64 L/s/m2) at 6.24 psf (300 Pa).
Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at a static (with weeps) test pressure of 6.00 psf (300 Pa).
Structural Loading (ASTM E330):
** NOTE TO SPECIFIER ** Delete design pressure not required.
Design Pressure: DP-40.
Design Pressure: DP-45.
Outward Opening Standard Unit: Pass.
Design Pressure Positive: 70 psf (3350 Pa).
Design Pressure Negative: 70 psf (3350 Pa).
Windload Resistance: Pass; +/- 70 psf (+/- 3350 Pa).
Missile Impact & Cycling (TAS 201 & 203; ASTM E1886/ ASTM E1996) with 7/16 in single glazing or 1-1/8 in IGU Impact Glass:
Outward Opening (Standard Unit): Pass:
Design Pressure Positive: 90 psf (4300 Pa).
Design Pressure Negative: 90 psf (4300 Pa).
Performance Criteria (Lab Tested): Higher Weather Performance Raised Sill - Inward Opening:
Air Infiltration (ASTM E283): 0.08 to 0.30 cfm/ft2 (0.41 to 1.54 L/s/m2) at a static air pressure difference of 1.57 psf (75 Pa).
0.20 to 0.30 cfm/ft2 (1.02 to 1.54 L/s/m2) at 6.24 psf (300 Pa).
Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at a static test pressure of 12 psf (715 Pa).
Dynamic Water Penetration (AAMA 520 / ASTM E2268): Performance Level 2 at 6-18 psf (300-860 Pa).
Structural Load Deflection (TAS 202 / ASTM E330):
** NOTE TO SPECIFIER ** Delete design pressure not required.
Design Pressure: DP-40.
Design Pressure: DP-45.
Inward Opening (Standard Unit): Pass.
Design Pressure Positive: 70 psf (3350 Pa).
Design Pressure Negative: 100 psf (4785 Pa).
Windload Resistance: Pass; +/- 100 psf (+/- 4785 Pa).
Missile Impact & Cycling (TAS 201 & 203; ASTM E1886/ ASTM E1996) with 7/16 in single glazing or 1-1/8 in IGU Impact Glass:
Inward Opening (Standard Unit): Pass:
Design Pressure Positive: 90 psf (4300 Pa).
Design Pressure Negative: 110 psf (5260 Pa).
Performance Criteria (Lab Tested): Higher Weather Performance Raised Sill - Outward Opening:
Air Infiltration (ASTM E283): 0.02 to 0.14 cfm/ft2 (0.10 to 0.72 L/s/m2) at a static air pressure difference: of 1.57 psf (75 Pa).
0.07 to 0.30 cfm/ft2 (0.36 to 1.54 L/s/m2) at 6.24 psf (300 Pa).
Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at a static test pressure of 12 psf (715 Pa).
Dynamic Water Penetration (AAMA 520 / ASTM E2268): Performance Level 1 at 5-15 psf (250-715 Pa).
Structural Load Deflection (TAS 202 / ASTM E330):
** NOTE TO SPECIFIER ** Delete design pressure not required.
Design Pressure: DP-40.
Design Pressure: DP-45.
Outward Opening (Standard Unit): Pass.
Design Pressure Positive: 70 psf (3350 Pa).
Design Pressure Negative: 70 psf (3350 Pa).
Windload Resistance: Pass; plus or minus 70 psf (3350 Pa).
Missile Impact & Cycling (TAS 201 & 203; ASTM E1886/ ASTM E1996) with 7/16 in (11 mm) single glazing or 1-1/8 in (29 mm) IGU Impact Glass:
Outward Opening (Standard Unit): Pass.
Design Pressure Positive: 90 psf (4300 Pa).
Design Pressure Negative: 90 psf (4300 Pa).
** NOTE TO SPECIFIER ** Items below are common to all sill types, except as noted.** NOTE TO SPECIFIER ** SL73 INSWING system with a raised or low profile saddle sill is approved with Miami-Dade County, Florida NOA No. 15-0226.06 with expiration date of 11th August 2020. SL73 OUTSWING system with a raised or low profile saddle sill is approved with Miami-Dade County, Florida NOA No. 15-0226.05 with expiration date of 11th August 20120. Miami Dade County, Florida approval is for any number of panels with any panel size up to a maximum of 3 ft (914 mm) wide increments and 8 ft (2.438 m) high. A unit with either a raised sill (with water rating) or low profile saddle sill (with no water rating) is approved. With panel sizes of 36 x 8 ft (0.914 x 2.438 m), SL73 inswing with raised sill has a DP rating of 70 to minus 100 psf (3.35 to minus 4.79 kPa), SL73 outswing with raised sill and SL73 inswing/outswing with saddle sill has DP ratings of plus or minus 70 psf (3.35 kPa). With smaller panel sizes and using comparative analysis, higher DP ratings of up to 80 to minus 110 psf (3.83 to minus 5.27 kPa) for inswing with raised sill and 80 to minus 90 psf (3.83 to minus 4.31 kPa) for outswing with raised sill and for inswing/outswing with saddle sill are possible.
Folding Glass Storefront Units tested to AAMA/WDMA/CSA 101/I.S.2/A440.
Forced Entry (TAS 202, AAMA 1304, ASTM F842): Meets requirements for F1.
Hurricane and Impact Rated (AAMA 506; AAMA/WDMA/CSA/I.S2/A440; ASTM E1886/ ASTM E1996): Missile Level D and Wind Zone 4 rated.
** NOTE TO SPECIFIER ** The NFRC 100, 200, 400 and 500 ratings of the SL73 Folding Glass Storefront System meet Prescriptive Method requirements for U-factor, SHGC, Air Leakage and CRF of California Title 24, Chapter 3, Building Envelope Requirements.
Thermal Performance (U-factor): NFRC 100 rated.
Solar Heat Gain Coefficient (SHGC) plus Visible Light Transmission (VT): NFRC 200 rated.
Air Leakage: NFRC 400 rated.
Condensation Resistance Factor (CRF): NFRC 500 rated.
** NOTE TO SPECIFIER ** Energy Star values for doors with greater than 50 percent glass can be achieved through the use of specific glass units: Refer to Nanawall Systems, Inc.
EPA Energy Star: Meets requirements.
** NOTE TO SPECIFIER ** Delete if not required.
Model SL80 and SL81: Aluminum folding glass wall systems as manufactured by Nanawall Systems, Inc.
Provide floor mounted track supported sliding-folding thermally broken aluminum-framed glass panel system.
Frame: Thermally Broken Aluminum Framed Folding Glass Storefront 4-1/8 in (105 mm) wide medium stile frame, floor track supported system. Manufacturer's standard thermally broken frame and panel profiles, with head track, side jambs and panels with dimensions as shown on Drawings.
** NOTE TO SPECIFIER ** Single lite is standard; other options may require an upcharge. Refer to manufacturer's size chart for glass panel sizes requiring the use of horizontal mullions.
Panels with single lite with simulated divided lites in pattern as shown on Drawings.
Rail Depth: 3-1/8 in (80 mm).
Head Rail Width: 3-13/16 in (97 mm).
** NOTE TO SPECIFIER ** 1-7/8 x 2, plus 3/8 in gasket equals 4-1/8 in (105 mm) vertical rail profile.
Jamb Rail Width: 1-7/8 in (48 mm).
** NOTE TO SPECIFIER ** Delete mullion rail if not required.
Mullion Depth: 2-7/8 in (73 mm).
Mullion Width: 2-13/16 in (71 mm).
** NOTE TO SPECIFIER ** Delete bottom rail not required.
Bottom Rail Width: 2-9/16 In (66 mm) for flush sill or low profile saddle sill.
Bottom Rail Width: 3-13/16 in (97 mm) for raised sill.
Bottom Rail Width: Manufacturer's standard kickplate.
** NOTE TO SPECIFIER ** Select height between 6 and 12 in (152 and 305 mm) high.
Kickplate Height (in / mm): ______.
** NOTE TO SPECIFIER ** Delete performance criteria options not required for Sill and Opening types, not chosen. Weeps, when provided, are to be drilled in the field by the installer to manufacturer's requirements. It is expected that the installed system's performance would be not more than 66.7 percent of the following certified laboratory test data in accordance with AAMA 503.
Performance Criteria (Lab Tested): Higher Weather Performance Raised Sill - Inward Opening:
Air Infiltration (EN 1026): Class 4.
0.03 cfm/ft2 (0.48 m3/h m2) at a static air pressure difference of 2.1 psf (100 Pa).
0.06 cfm/ft2 (1.00 m3/h m2) at 6.24 psf (300 Pa).
Water Penetration (EN 1027): Class 9A: No uncontrolled water leakage at a static test pressure of 12 psf (600 Pa).
Structural Load Deflection with Standard Locking Rods (EN 12211):
Deflection: Class C3; < 1/300 at +/- 25 psf (+/- 1200 Pa).
Breakage: None at +/- 36 psf (+/- 1800 Pa).
Performance Criteria (Lab Tested): Higher Weather Performance Raised Sill - Outward Opening:
Air Infiltration (EN 1026): Class 4.
0.04 cfm/ft2 (0.73 m3/h m2) at a static air pressure difference of 2.1 psf (100 Pa).
0.08 cfm/ft2 (1.40 m3/h m2) at 6.24 psf (300 Pa).
Water Penetration (EN 1027): Class 9A. No uncontrolled water leakage at a static test pressure of 12 psf (600 Pa).
Structural Load Deflection with Standard Locking Rods (EN 12211):
Deflection: Class B4; < 1/200 at +/- 25 psf (+/- 1200 Pa).
Breakage: None at +/- 36 psf (+/- 1800 Pa).
Performance Criteria (Lab Tested): Intermediate Sill - Inward Opening:
Air Infiltration (ASTM E283): Less than or equal to 0.03 cfm/ft2 (0.15 L/s/m2) at a static air pressure difference: of 1.57 psf (75 Pa).
Less than or equal to 0.09 cfm/ft2 (0.46 L/s/m2) at 6.24 psf (300 Pa).
Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at 7.5 psf (360 Pa).
Structural Loading (ASTM E330):
Design Pressure - Positive: 45 psf (2160 Pa).
Design Pressure - Negative: 50 psf (2400 Pa).
Performance Criteria (Lab Tested): Intermediate Sill - Outward Opening:
Air Infiltration (ASTM E283): Less than or equal to 0.08 cfm/ft2 (0.41 L/s/m2) at a static air pressure difference: of 1.57 psf (75 Pa):
Less than or equal to 0.10 cfm/ft2 (0.51 L/s/m2) at 6.24 psf (300 Pa).
Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at 8.35 psf (400 Pa).
Structural Loading (ASTM E330):
Design Pressure - Positive: 55 psf (2620 Pa).
Design Pressure - Negative: 45 psf (2160 Pa).
Performance Criteria (Lab Tested): Flush Sill - Inward and Outward Opening Units:
Air Infiltration (EN 1026): Class 4.
0.07 cfm/ft2 (1.33 m3/h m2) at a static air pressure difference of 2.1 psf (100 Pa).
0.14 cfm/ft2 (2.63 m3/h m2) at 6.24 psf (300 Pa).
Structural Load Deflection with Standard Locking Rods (EN 12211): Class C3.
Deflection: < 1/200 at +/- 25 psf (+/- 1200 Pa).
Breakage: None at +/- 36 psf (+/- 1800 Pa).
Performance Criteria (Lab Tested): Low Profile Saddle Sill - Inward and Outward Opening Units:
Air Infiltration (EN 1026): Class 4:
0.07 cfm/ft2 (1.33 m3/h m2) at a static air pressure difference of 2.1 psf (100 Pa).
0.14 cfm/ft2 (2.63 m3/h m2) at 6.24 psf (300 Pa).
Structural Load Deflection with Standard Locking Rods (EN 12211): Class C3.
Deflection: < 1/200 at +/- 25 psf (+/- 1200 Pa).
Breakage: None at +/- 36 psf (+/- 1800 Pa).
** NOTE TO SPECIFIER ** Items below are common for all sill types, except as noted.
System - Cycle Testing Performance (EN 1191): Class 3; 10,000 cycles.
** NOTE TO SPECIFIER ** Retain Burglary Resistance subparagraphs below when desired.
Unit Burglary Resistance: EN 1627-30, Class RC2/ RC2N (Resistance Class 2) certified.
Lockset Burglary Resistance: PAS 24 certified.
** NOTE TO SPECIFIER ** The NFRC 100, 200 and 500 ratings for the SL80 and SL81 Folding Glass Panel Systems meet Prescriptive Method requirements for U-factor, SHGC and CRF of California Title 24, Chapter 3, Building Envelope Requirements.
Thermal Performance (U-factor): NFRC 100 rated.
Solar Heat Gain Coefficient (SHGC) plus Visible Light Transmission (VT): NFRC 200 rated.
Air Leakage: NFRC 400 rated.
Condensation Resistance Factor (CRF): NFRC 500 rated.
** NOTE TO SPECIFIER ** Energy Star values for doors with greater than 50 percent glass can be achieved through the use of specific glass units. Refer to Nanawall Systems, Inc.
EPA Energy Star: Meets requirements.
** NOTE TO SPECIFIER ** Delete if not required.
Model SL82: Aluminum folding glass wall systems as manufactured by Nanawall Systems, Inc.
Floor mounted track supported sliding-folding thermally broken aluminum-framed glass panel system.
Frame: Thermally Broken Aluminum Framed Folding Glass Storefront Description: 3-1/8 in (80 mm) thick interior frame with a structurally glazed frameless exterior, floor track supported roller system with head guide rails, and designed for inswing opening straight glass walls. Manufacturer's standard thermally broken frame and panel profiles, with floor and head tracks, side jambs and panels with dimensions as shown on Drawings.
** NOTE TO SPECIFIER ** SL 82 not available with horizontal mullion divided lite or horizontal simulated divided lites. Single lite is standard;. Refer to manufacturer's size chart for glass panel sizes requiring the use of horizontal mullions.
Panels with single lite with simulated divided lites in pattern as shown on Drawings.
Rail Depth: 3-1/8 in (80 mm).
Head Rail Width: 4-1/2 in (115 mm).
** NOTE TO SPECIFIER ** 1-7/8 x 2, plus 3/8 in gasket equals 4-1/8 in (105 mm) vertical rail profile.
Jamb Rail Width: 1-7/8 in (48 mm).
** NOTE TO SPECIFIER ** Delete mullion rail depth and width if not required.
Mullion Depth: 2-7/8 in (73 mm).
Mullion Width: 2-13/16 in (71 mm).
** NOTE TO SPECIFIER ** SL 82 model not available. Delete bottom rail width not required.
Bottom Rail Width: 2-9/16 In (66 mm) for flush sill or low profile saddle sill
Bottom Rail Width: 3-13/16 in (97 mm) for raised sill.
** NOTE TO SPECIFIER ** SL 82 model. Delete bottom rail width not required.
Bottom Rail Width: 2-3/4 in (70 mm) for flush sill or saddle sill.
Bottom Rail Width: Manufacturer's standard.
** NOTE TO SPECIFIER ** Indicate kickplate height. Not available for SL 82. Select height between 6 and 12 in (152 and 305 mm) high.
Kickplate Height (in / mm): ______.
** NOTE TO SPECIFIER ** Delete performance criteria paragraph not required. Weeps, when provided, are to be drilled in the field by the installer to manufacturer's requirements.It is expected that the installed system's performance would be not more than 2/3rds of the following certified laboratory test data in accordance with AAMA 503.
Performance Criteria (Lab Tested): Weather Performance Raised Sill - Inward Opening:
Air Infiltration (ASTM E283 and NFRC 400):
Standard Unit: Plus A3.
Static Air Pressure Difference of 1.57 psf (75 Pa): 0.02 cfm/ft2 (0.10 L/s/m2)
Static Air Pressure Difference of 6.24 psf (300 Pa): 0.09 cfm/ft2 (0.46 L/s/m2) .
Unit with Additional Weepholes: Plus A3:
Static Air Pressure Difference of 1.57 psf (75 Pa): 0.13 cfm/ft2 (0.67 L/s/m2).
Static Air Pressure Difference of 6.24 psf (300 Pa): 0.27 cfm/ft2 (1.38 L/s/m2).
Water Penetration (ASTM E547 and ASTM E331):
Standard Unit: Plus B2.
Static Test Pressure of 6 psf (300 Pa): No uncontrolled water leakage.
Unit with Additional Weepholes: Plus B4.
Static Test Pressure of 12 psf (580 Pa): No uncontrolled water leakage at a
Structural Load Deflection with Standard Locking Rods (ASTM E330): Pass.
** NOTE TO SPECIFIER ** Higher structural performance is possible with reinforced locking rods. Contact NanaWall.
Design Pressure - Positive: 30 psf (1440 Pa).
Design Pressure - Negative: 40 psf (1920 Pa).
Windload Resistance: C1 rating (plus or minus 720 Pa).
Blow-out: C3 rating (2160 Pa, minus 2880 Pa).
Forced Entry (ASTM F842, AMMA 1304, CAWM 300): Meets Grade 40; Plus F2.
Performance Criteria (Lab Tested): Weather Performance Raised Sill & Flush Sill - Inward Opening:
Air Infiltration (EN 1026/12207) for Raised Sill Only: Category 3.
At 12 psf (600 Pa): 0.79 cfm/ft2 (6.75 L/s/m2).
Water Penetration (EN 1027/12208) for Raised Sill Only: Category 7A.
At a static test pressure of 6 psf (300 Pa): No uncontrolled water leakage.
Structural Load Deflection with Standard Locking Rods (EN 12211):
** NOTE TO SPECIFIER ** Higher structural performance is possible with reinforced locking rods. Contact NanaWall.
Deflection: Less than 1/150 at plus or minus 24 psf (1200 Pa).
Deflection: Less than 1/150 at plus or minus 36 psf (1800 Pa).
** NOTE TO SPECIFIER ** Items below are common to all sill types, except as noted.
System - Life Cycle Performance (DIN EN 1191/12400): 10,000 cycles.
** NOTE TO SPECIFIER ** Energy Star values for doors with greater than 50 percent glass can be achieved through the use of specific glass units. Refer to Nanawall Systems, Inc.
EPA Energy Star: Meets requirements.
Material:
Aluminum Extrusion: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).
Thickness: 0.078 in (2.0 mm) nominal.
Thermal Break: 3/4 to 15/16 in (20 to 24 mm) wide polyamide plastic reinforced with glass fibers. Thinner or poured and de-bridged type thermal breaks not acceptable.
Finish: Color as indicated or scheduled on drawings:
** NOTE TO SPECIFIER ** Delete finish design not required.
Provide single finish and color on inside and outside surfaces.
Provide two-tone finish and color for inside and outside surfaces.
** NOTE TO SPECIFIER ** Delete finish system not required.
Finish System: Anodized (AAMA 611).
Finish System: Powder Coat (AAMA 2604).
Finish System: PVDF Coat (AAMA 2605).
Locking Hardware and Handles:
** NOTE TO SPECIFIER ** Delete main entry panel options not required. Edit to suit project requirements.
Main Entry Panels for Models with Swing Panels:
Manufacturer's standard lever handles on the inside and outside.
Standard lockset with a lockable latch.
Multi-point locking with a dead bolt and rods at the top and bottom on primary panel.
Secondary panel hardware, hardware finish and keyed cylinder requirements as indicated or scheduled on drawings.
** NOTE TO SPECIFIER ** SL73 only. Delete if not required.
Main Entry Panel for Models with a Swing Panel:
Manufacturer's push/pull handles.
Separate lockset and dead bolt.
One point locking at the top and bottom consisting of locking rods operated by a 180 degree turn of flat handle on the inside.
Push-pull handles in a brushed stainless steel finish and stainless steel flat handles in finish scheduled on Drawings.
** NOTE TO SPECIFIER ** SL73 only. Delete if not required.
Main Entry Pair of Panels on Models without a Swing Panel:
Manufacturer's standard L-shaped handles on the inside and outside
Lockset with profile cylinder. Operation of lockset is by turn of key from outside and thumb turn inside.
Two-point locking hardware operated by 180 degree turn of the handle.
L-shaped handles. Finish as scheduled on Drawings.
** NOTE TO SPECIFIER ** With this option main entry panel is operable from inside only and there is no latch. Other compatible lever, L-shaped and push-pull handle styles and finishes are available from other suppliers.
Main Entry Panel:
Manufacturer's standard U/L-shaped handle on inside only
Concealed two point locking hardware operated by 180 degree turn of handle.
** NOTE TO SPECIFIER ** SL80 and SL81 only. Delete if not required.
Main Entry Panel for Models with a Swing Panel:
No hardware or locking provided by manufacturer.
Field installed panic device by Section 08 71 53 - Security Door Hardware.
Secondary Panels and Pairs of Folding Panels:
Manufacturer's standard handles or removable custodial handles as scheduled.
Concealed two-point locking hardware operated by 180 degree turn of handle between each pair.
Face applied flush bolt locking not acceptable.
Folding Panel Hardware:
Sliding-Folding Hardware: Manufacturer's standard combination sliding and folding hardware with top and bottom tracks and threshold. Running carriages to have sealed, self-lubricated, ball bearing multi-rollers. Surface mounted hinges and running carriages not acceptable.
Weatherstripping:
Manufacturer's double layer EPDM between panels.
EPDM gasket and Q-lon gasket.
Brush seal between panel and frame
Brush seals with a two-layer fiberglass reinforced polyamide fin for sealing between panels and between panel and frame
Attached at both inner and outer edge of bottom of door panels on recessed sill
Attached on frame.
** NOTE TO SPECIFIER ** Delete if not required.
SINGLE TRACK SLIDING GLASS WALL SYSTEMS
Design Criteria:
Standard top-hung, single-track, interlocking framed sliding glass storefront system that can be pocketed when open and have a swing door. Manufacturer's standard frame and panel profiles, with head track, stacking bays, side jambs, sliding panels, and swing panels with dimensions as shown on Drawings.
Sizes and Configurations: As indicated by Drawings for selected number and size of panels, location of swing panels, and location of tracks and stacking bays.
Unit Operation: Adjustable sliding and swing hardware with top and bottom track.
** NOTE TO SPECIFIER ** Delete panel type not required.
Panel Type: Multiple unattached with Entry/Egress panel hinged to side jamb.
Panel Type: Multiple unattached with Entry/Egress panel convertible to sliding panel.
** NOTE TO SPECIFIER ** HSW60 maximum W x H panel sizes up to 10 ft x 39 in (3.05 m x 1 m) for swing panels and 54 in (1.385 m) wide for sliding panels. Panels over 100 in (2.540 m) high require an intermediate horizontal mullion.
Panel Size (W x H): As indicated.
** NOTE TO SPECIFIER ** Single lite panel is standard. Refer to manufacturer's size chart for glass panel sizes requiring the use of horizontal mullions. Delete panel not required.
Panels: Single lite.
Panels: Multiple lites with horizontal mullions at heights indicated from the bottom of the panel.
Panels: Single lite with simulated divided lites in pattern indicated.
** NOTE TO SPECIFIER ** See manufacturer drawings for selected custom dimensions within maximum frame sizes possible as indicated in manufacturer's literature. See drawings for selected number of panels and configuration. Delete configurations not required
Panel Configuration: Straight.
Panel Configuration: Segmented curve.
Panel Configuration: 90 degree angle turn.
Panel Configuration: 135 degree angle turn.
Panel Configuration: Window/door combination.
** NOTE TO SPECIFIER ** Delete stack storage configuration not required.
Stack Storage Configuration: Remote pocket.
Stack Storage Configuration: Jamb wall.
Stack Storage Configuration: Behind swing door.
Stack Storage Configuration: Straight wall.
Stack Storage Configuration: Jamb wall pocket(s).
** NOTE TO SPECIFIER ** Contact NanaWall for availability of many commercial glass and glazing types.
Vision Glass: Safety Glazing per ANSI Z97.1 and CPSC 16CFR 1201.
** NOTE TO SPECIFIER ** For storefront units requiring acoustic performance keep the following paragraph.
Acoustical Glass: Per (ASTM E413 and ASTM E1332): STC.
Performance:
** NOTE TO SPECIFIER ** Specify Low Profile Saddle Sills for resistance against wind driven rain.Flush Sills and Surface Mounted Interior Sills have no rating against wind driven rain. Floor Sockets without a Sill do not have a water rating.Weeps are to be drilled in the field by the installer to manufacturer's requirements.It is expected that the installed system's performance would be not more than 66.7 percent of the following certified laboratory test data in accordance with AAMA 503.
Performance Criteria (Lab Tested): Low Profile Saddle Sill.
** NOTE TO SPECIFIER ** HSW60 aluminum only. Delete if not required.
Air Infiltration (ASTM E283): 0.3 cfm/ft2 (1.5 L/s/m2) at a static air pressure difference of 1.56 psf (75 Pa).
** NOTE TO SPECIFIER ** HSW66 wood only. Delete if not required.
Air Infiltration (ASTM E283): 0.12 cfm/ft2 (0.60 L/s/m2) at a static air pressure difference of 1.57 psf (75 Pa).
** NOTE TO SPECIFIER ** HSW66 wood only. Delete if not required.
Air Infiltration (ASTM E283): 0.30 cfm/ft2 (1.5 L/s/m2) at a static air pressure difference of 6.27 psf (300 Pa).
Water Penetration (ASTM E331, ASTM E547): No uncontrolled water leakage at a static test pressure in:
** NOTE TO SPECIFIER ** Both aluminum and wood. Delete if not required.
Units with Weepholes from Middle Channel: 2.92 psf (140 Pa).
** NOTE TO SPECIFIER ** HSW60 aluminum only. Delete if not required.
Units with Weepholes from Inner Channel: 6.0 psf (290 Pa).
** NOTE TO SPECIFIER ** HSW66 wood only. Delete if not required.
Units with Weepholes from Inner Channel: 5.0 psf (240 Pa).
Structural Loading (ASTM E330): Pass.
Load Structure: At 1.5 times design wind pressure with no glass breakage or permanent damage to fasteners or storefront components:
** NOTE TO SPECIFIER ** HSW60 aluminum only. Delete if not required.
Design Pressure Positive: 45 psf (2160 Pa).
** NOTE TO SPECIFIER ** HSW60 aluminum only. Delete if not required.
Design Pressure Negative: 45 psf (2160 Pa).
** NOTE TO SPECIFIER ** HSW66 wood only. Delete if not required.
Design Pressure Positive: 41 psf (2000 Pa).
** NOTE TO SPECIFIER ** HSW66 wood only. Delete if not required.
Design Pressure Negative: 41 psf (2000 Pa).
** NOTE TO SPECIFIER ** HSW60 aluminum only. Delete if not required.
Forced Entry (ASTM F842): Meets Type A - Grade 40.
** NOTE TO SPECIFIER ** HSW66 wood only. Delete if not required.
Forced Entry (AAMA 1304): Meets 300 lb. (1330 N) point load requirement.
** NOTE TO SPECIFIER ** HSW60 aluminum only. HSW60 Inswing and outswing systems are approved by the State of Florida. FL 17751.1 Delete if not required.
Florida Product Approval - Wind Loading per FL 17751.1: Units with panel sizes up to 43 in (1092 mm) wide x 10 ft (3.048 m) high subject to manufacturer size chart.
** NOTE TO SPECIFIER ** HSW60 aluminum only. Delete if not required.
Swing Panel - Operation and Cycling Performance (AAMA 920): 500,000 cycles.
Sliding Glass Storefront Units tested to AAMA/WDMA/CSA 101/I.S.2/A440.
Project Wind Loads (ASCE 7): System designed to withstand 20.0 psf (958 Pa) core required positive and negative pressure as minimum loads normal to the plane of the wall as required by authorities having jurisdiction.
** NOTE TO SPECIFIER ** The NFRC 100, 200, 400 and 500 ratings of the HSW60 Sliding Glass Storefront System meet Prescriptive Method requirements for U-factor, SHGC, Air Leakage and CRF of California Title 24, Chapter 3, Building Envelope Requirements.
Thermal Performance (U-factor): NFRC 100 rated.
Solar Heat Gain Coefficient (SHGC) plus Visible Light Transmission (VT): NFRC 200 rated.
Air Leakage: NFRC 400 rated.
Condensation Resistance Factor (CRF): NFRC 500 rated.
** NOTE TO SPECIFIER ** Energy Star values for doors with greater than 50 percent glass can be achieved through the use of specific glass units. Refer to Nanawall Systems, Inc.
EPA Energy Star: Meets requirements
Wood Construction:
Product: Model HSW66 as manufactured by Nanawall Systems, Inc.
Wood panels to include close tolerance mortise and tenon, glued and pinned corners.
Head Jamb, Tracks, Stacking Bays, and Sill: From manufacturer's standard profiles. Provide head tracks, stacking bays, and sill with dimensions shown on the Drawings.
** NOTE TO SPECIFIER ** Delete floor sills finishes not required.
Floor Sill Finish: Clear anodized flush sill.
Floor Sills Finish: Dark bronze anodized flush sill.
Floor Sills Finish: Clear anodized low profile saddle sill.
Floor Sills Finish: Dark bronze anodized low profile saddle sill.
Floor Sills Finish: Surface mounted interior sill.
Floor Sills Finish: No sill, units with adjustable floor sockets.
Floor Sills Finish: As indicated on the Drawings.
Floor Sills Finish: As selected from manufacturer's options.
Weatherstripping: Manufacturer's standard double layer APTK at both the inner and outer edge of door panels or on frame for vertical sealing between panels and between panels and frame. Provide brush seals with flexible plastic web for all horizontal sealing.
Sizes and Configurations: Refer to the Drawings for selected custom dimensions within the maximum frame sizes possible as indicated in manufacturer's literature. Refer to the Drawings for selected number of panels, location of swing panels, and location of tracks and stacking bays.
Aluminum Extrusions: Alloy specified as AlMgSi 0.5 with strength rated as 6063-T5 or F-22 (European standard).
Nominal Thickness: 0.078 in (2.0 mm).
Finish: Anodized conforming to AAMA 611 Clear.
Panels and Side Jambs: From manufacturer's standard profiles, provide panels and side jambs with dimensions shown on the Drawings or as needed for panel stability.
** NOTE TO SPECIFIER ** Delete lite and mullion options not required.
Lites and Mullions: Panels with standard one lite configuration.
Lites and Mullions: Panels with horizontal mullions at specified heights from the bottom of the panel.
Lites and Mullions: Panels with simulated divided lites in pattern as shown on the Drawings.
Head Rail (W x D): 2-3/4 x 3-3/4 in (70 x 95 mm).
Jamb Rail (W x D): 1-3/4 x 1-3/4 in (45 x 45 mm).
** NOTE TO SPECIFIER ** Delete bottom rail option not required.
Bottom Rail: Manufacturer's standard bottom rail. (2-3/4 x 3-3/4 in (70 x 95 mm).
Bottom Rail: High profile.
** NOTE TO SPECIFIER ** Delete height options not required.
Height: As selected by Architect from manufacturer's options.
Height: As indicated on the Drawings.
** NOTE TO SPECIFIER ** Height value ranges from 5 to 12 in (127 to 305 mm). Delete if not required.
Height: ____.
Wood: Solid, three layer, cross-grained, kiln dried with matching solid wood glazing stops.
** NOTE TO SPECIFIER ** Delete wood species options not required.
Wood Species: Douglas fir.
Wood Species: European pine.
Wood Species: Meranti.
Wood Species: Western hemlock.
Wood Species: Spruce.
Wood Species: European oak.
Wood Species: Sapeli mahogany.
Wood Species: As indicated on the Drawings.
Wood Species: As selected by Architect from manufacturer's options.
** NOTE TO SPECIFIER ** The following three wood species are for interior applications only. Delete if not required.
Wood Species: Cherry.
Wood Species: Maple.
Wood Species: Beech.
Before installation, all wood must have a field applied finish with at least two coats.
** NOTE TO SPECIFIER ** Delete wood sealing finish options not required.
Wood Sealing Finish: Water based, opened pored clear sand sealed for stain.
Wood Sealing Finish: Standard primer for paint.
Wood Sealing Finish: As indicated on the Drawings.
Wood Sealing Finish: As selected from manufacturer's options.
Sliding and Swinging Hardware:
Manufacturer's standard hardware.
For each sliding panel, provide 2 three wheeled, sintered bronze (oil impregnated) unidirectional sliding panel carriers with a one-wheeled, polyamide guide roller that is attached to the panels with stainless steel rods.
Carrying capacity of each carrier to be 330 lbs (150 kg).
** NOTE TO SPECIFIER ** Delete hinge options not required.
Hinges: Provide manufacturer's standard clear anodized aluminum hinges. Provide stainless steel hinge pins.
Hinges: Provide manufacturer's dark bronze anodized aluminum hinges. Provide stainless steel hinge pins.
Hinges: As indicated on the Drawings.
Hinges: As selected by Architect from manufacturer's full range of standard available options.
Provide machine screws for connecting frame components.
** NOTE TO SPECIFIER ** Delete if not required.
Aluminum Construction:
Product: Model HSW60 as manufactured by Nanawall Systems, Inc.
Weather Stripping: Manufacturer's standard double layer APTK at both the inner and outer edge of door panels or on frame for vertical sealing between panels and between panels and frame. Brush seals with flexible plastic web for all horizontal sealing.
Fabrication:
Use extruded aluminum frame and panel profiles, corner connectors and hinges, sliding and swinging hardware, locking hardware and handles, glass and glazing and weather stripping as specified herein to make a single track sliding glass wall.
Factory pre-assembled and ship with all components and installation instructions.
Sizes and Configurations: Refer to the Drawings for selected number and size of panels, location of swing panels, and location of tracks and stacking bays.
** NOTE TO SPECIFIER ** Delete lite/mullion options not required.
Lites and Mullions: Panels with standard one lite configuration.
Lites and Mullions: Panels with horizontal mullions at specified heights from the bottom of the panel.
Provide panels with simulated divided lites in pattern as shown on the Drawings.
Head Rail (W x D): 4-5/16 x 2-5/16 in (110 x 59 mm).
Jamb Rail (W x D): 5-1/4 x 2-5/16 in (134 x 59 mm).
** NOTE TO SPECIFIER ** Delete kickplate options not required.
Kickplate: Manufacturer's standard kickplate 2-3/8 in (60 mm) high.
Kickplate: As selected by Architect from manufacturer's options.
Kickplate: As indicated on the Drawings.
Aluminum Extrusion: Alloy specified as AIMgSi0.5 with strength rated as 6063-T5 or F-22 (European standard).
Nominal Thickness: 0.078 in (2.0 mm).
** NOTE TO SPECIFIER ** Delete finish not required. Refer to manufacturer's literature for powder coat colors available.
Finish: Powder coated conforming to AAMA 2604. Color as scheduled or indicated.
Finish: Anodized conforming to AAMA 611 - Clear.
Adjustment: Provide system capable of specified amount of adjustments without removing panels from tracks.
** NOTE TO SPECIFIER ** Delete aluminum threshold options not required.
Aluminum Threshold: Clear anodized standard flush sill.
Aluminum Threshold: Dark bronze anodized standard flush sill.
Aluminum Threshold: Clear anodized low profile saddle sill.
Aluminum Threshold: Dark bronze anodized low profile saddle sill.
Aluminum Threshold: No sill, units with adjustable floor sockets.
Aluminum Threshold: As indicated on the Drawings.
Aluminum Threshold: As selected from manufacturer's full range of sill options.
Sliding Door Hardware:
** NOTE TO SPECIFIER ** Delete keying option not required.
Keying: For applications with multiple units, all keyed alike.
Keying: For applications with multiple units, all keyed independently.
** NOTE TO SPECIFIER ** Delete handles not required.
Handles: Stainless steel levers, L shaped and flat handles in a titanium black finish.
Handles: Stainless steel levers, L shaped and flat handles in a brushed satin finish.
Handles: Oil rubbed bronze, L shaped and flat handles in solid brass
Handles: Satin nickel, L shaped and flat handles in solid brass
Handles: White, L shaped and flat handles in solid brass
Handles: As indicated on the Drawings.
Handles: As selected by Architect from manufacturer's full range of standard available options.
** NOTE TO SPECIFIER ** Delete options for locking hardware and handles on main entry panels not required. Note that other compatible lever handle styles and finishes are available from other suppliers.
Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, provide manufacturer's standard lever handles on the inside and outside, a Schlage compatible lock set with lockable latch, multi-point locking with a dead bolt and rods at the top and bottom on primary panel. Rods to be concealed and not edge mounted. Depression of handles withdraws latch. Lifting of handles engages rods and turn of key or thumb turn engages deadbolt and operates lock.
** NOTE TO SPECIFIER ** HSW50 only.
Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, provide manufacturer's standard lever handles on the inside and outside and a lock set with a one point lockable latch. Depression of handles withdraws latch. Turn of key or thumb turn engages deadbolt and operates lock. For heights above 7 ft (2137 mm) provide separate, additional deadbolts as necessary.
** NOTE TO SPECIFIER ** VSW35 only.
Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, provide manufacturer's standard L-shaped handles on the inside and outside, and a lock set with profile cylinder. Operation of lock set is by turn of key from the outside and with a thumbturn from the inside with a three point locking hardware operated by 180 degree turn of the handle.
** NOTE TO SPECIFIER ** Not available for VSW35. Delete if not required.
Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, provide manufacturer's push/pull handles with separate lock set and dead bolt.
** NOTE TO SPECIFIER ** Delete push-pull handle finishes not required.
Push-Pull Handle Finish: Brown nylon.
Push-Pull Handle Finish: Gray nylon.
Push-Pull Handle Finish: White nylon.
** NOTE TO SPECIFIER ** Not available for VSW35. This option is recommended with a door closer. Delete if not required.
Locking Hardware and Handles, Main Entry Panels: On the main entry panel for models with a swing panel, no hardware or locking to be provided by the manufacturer, but with field installed panic device by others.
Locking Hardware and Handles, Main Entry Panels: On the sliding panel to be opened first for models without a swing panel, provide manufacturer's standard L-shaped handle on the inside, flat handle on the outside and lock set with profile cylinder. Operation of lock set is by turn of key from the outside and with a thumbturn from the inside with a two point locking hardware operated by 180 degree turn of the handle.
Locking Hardware and Handles, Main Entry Panels: On the sliding panel to be opened first for models without a swing panel, provide manufacturer's standard flat handle on the inside and on the outside and a lock set with a profile cylinder. Operation of lock set is by turn of key from the outside and from the inside with a two point locking hardware operated by 180 degree turn of the handle.
** NOTE TO SPECIFIER ** Key operation from the inside may not meet egress requirements. Note that with the following options, the main entry panel is operable from inside only and that there is no latch. Delete if not required.
Locking Hardware and Handles, Main Entry Panels: on main entry panel, provide manufacturer's standard flat handle on inside only with concealed two point locking hardware operated by 180 degree turn of handle.
** NOTE TO SPECIFIER ** Delete if not required.
Aluminum Locking Rods: Rods to have a stroke of 15/16 in (24 mm).
** NOTE TO SPECIFIER ** Delete end caps option not required.
End Caps: Fiberglass end caps reinforced to meet structural loading requirements of application on top and bottom.
End Caps: Standard fiber glass reinforced polyamide end caps on top and bottom.
** NOTE TO SPECIFIER ** Delete locking hardware and handles, secondary panels option not required.
Locking Hardware and Handles, Secondary Panels: On all other secondary panels, provide manufacturer's standard flat handles and concealed two point locking hardware operated by 180 degree turn of handle. Face applied flush bolt locking will not be allowed.
Locking Hardware and Handles, Secondary Panels: On all other secondary panels, provide removable custodial handles and concealed two point locking hardware operated by 180 degree turn of handle. Face applied flush bolt locking will not be allowed.
** NOTE TO SPECIFIER ** Delete if not required.
For any incorporated swing panel in a sliding L frame panel, provide pull handle to convert swing panel to sliding L frame panel and vice versa.
Incorporated Swing Panel Pull Handles: Clear anodized only.
** NOTE TO SPECIFIER ** Delete handle height option not required.
Handle Height, Centered: 41-3/8 in (1050 mm) from bottom of panel.
Handle Height, Centered: _____ from bottom of panel.
Full Wall to Ceiling Glass Construction:
Product: Provide cero as manufactured by Nanawall Systems, Inc. Sliding and fixed, large-area glass panels in an extruded aluminum frame.
Performance Criteria:
Air Permeability (EN 12207 / EN 12211): Class 4.
Barrier-Free Accessibility (DIN 18040): Pass.
Driving Rain and Water Impermeability (EN 12208 / EN 1027): 12 psf (600 Pa)
Durability (DIN EN 1191): 2.
System - Life Cycle Performance (DIN EN 1191/12400):
cero III Triple-Glazed: 40,000 cycles
Wind Load Resistance, Unreinforced (EN 12210 / EN 1627):
cero II Double-Glazed: Class B4
cero III Triple-Glazed: Class B3
Burglary Protection (EN 1628, 1629, 1630 / EN 1627):
** NOTE TO SPECIFIER ** Besides a certified burglary resistant frame option, cero? can also be fitted with an electronic security option by others
cero II Double-Glazed: Class RC2 (WK2)
cero III Triple-Glazed: Class RC2 (WK2) and Class RC3 (WK3)
** NOTE TO SPECIFIER ** For the highest levels of insulation and energy efficiency, cero's profiles are thermally broken with glass fiber reinforced polyamide with thermal breaks aligned in the same plane.Thermal performance values vary depending on the glass, system, and configuration used in each individual application. U-Values as low as 0.26 and SHGC values as low as 0.16 are available to meet energy code requirements.Condensation may occur when system is installed in cold climates or in a facility with high indoor humidity. If condensation could be an issue for your application, NanaWall recommends taking appropriate measures during the design and construction phase to reduce or eliminate the possibility of condensation. There are many third party sources discussing the nature of condensation and ways to reduce or eliminate condensation, including publications by AAMA, WDMA and Efficient Windows Collaborative. Contact NanaWall for more information.
Thermal Performance (U-factor): NFRC 100
Solar Heat Gain Coefficient (SHGC) and Visible Light Transmission (VT): NFRC 200
Air Leakage: NFRC 400 pending
Condensation Resistance Factor (CRF): NFRC 500 pending
EPA Energy Star: Meet requirements.
** NOTE TO SPECIFIER ** Delete subparagraph if not required or delete any subsequent subparagraphs that are not relevant to the project.
Sustainability Characteristics:
LEED 2009 (v3)
MRc1.1: NanaWall exterior glass wall systems, not demolished in a renovation project, are reused in the same location.
MRc1.2: NanaWall interior glass wall systems, not demolished in a renovation project, are reused in the same location.
MRc2:NanaWall cardboard shipping crates are made of 60 percent recycled material and are 100 percent recyclable.
MRc3:NanaWall's components easily disassemble and reassemble to "Use as salvaged... or reused materials."
IEQc2:NanaWall systems provide natural ventilation in the open position, assisting in the 90 percent required natural ventilation of occupied spaces of ASHRAE 62.1.
** NOTE TO SPECIFIER ** 98 percent of the cero system allows daylight through glass with only 2 percent opaque metal frame.
EQc8.1: NanaWall glass wall assembly borrowed light brings daylight deeper into the floor plate.
EQc8.2: NanaWall glass wall assemblies provide direct outdoor lines of sight.
LEED v4 for Interior Design and Construction (ID&C)
MRc1:NanaWall can be easily disassembled for salvage and reuse.
** NOTE TO SPECIFIER ** 98 percent of the cero system allows daylight through glass with only 2 percent opaque metal frame.
EQc7:NanaWall glass wall assembly borrowed light brings daylight deeper into the floor plate.
EQc8:NanaWall glass wall assemblies provide direct outdoor lines of sight.
Design Criteria:
Sizes and Configurations: As indicated by the drawings
** NOTE TO SPECIFIER ** With cero's optional automation accessory by others, the large panels can be operated and securely locked with a simple touch of a button or through the use of a cell phone app. The automation feature provides effortless and quiet operation. Keypads can be located on the interior and/or exterior for convenience and peace of mind. Please contact NanaWall for details. To meet various design intents, matching fixed glass panels are available to complement the cero system.
Unit Operation: Sliding hardware with recessed head, floor tracks and side jamb;
** NOTE TO SPECIFIER ** Delete unit operations not required.
Fixed.
Fixed and manual operation.
Manual operation.
Fix and motorized electric drive operation.
Motorized electric drive operation.
** NOTE TO SPECIFIER ** cero is available in numerous configurations with combinations of sliding and fixed panels. Systems are available with up to 3 tracks and 6 panels with pocketed and open corner configurations possible. Please see products/cero/options for configuration option animations.
Panel Configuration:
** NOTE TO SPECIFIER ** Delete panel configurations not required.
Straight
90 degree angle corner
Fixed all-glass 90 degree angle corner
Stack Storage Configuration: Side stack in track as indicated.
Mounting Type: Floor track supported.
** NOTE TO SPECIFIER ** Delete sill type not required.
Sill Type: Thermally broken
Sill Type: Non-thermally broken
Sliding Glass Wall system: Sliding panels stainless steel carrier rollers with double-row deep groove ball-bearings and rolls on single or tandem stainless steel rail runner inserts in thermally broken or non-thermally broken flush sill floor track. Flat 2-point locking handle, gasket seals and brushes, a hidden integrated drainage offset duct system, and glazing rebate ventilation for controlled back-ventilation of the panel edge. Frame is thermally isolated with glass-fiber reinforced polyamide cross-pieces and has a minimal 1-5/16 in (34 mm) exposure that matches vertical stiles.
Linear panel system load transfer to structure at floor.
** NOTE TO SPECIFIER ** Widths up to 88-1/2 in (2248 mm) and heights up to 157 in (4988 mm). Contact NanaWall for possible larger sizes.
Panel Size (in / mm): ______.
** NOTE TO SPECIFIER **Delete panel weight not required.
Maximum Panel Weight: 1,300 lb. (600 kg) cero II double glazed.
Maximum Panel Weight: 2,200 lb. (1 000 kg) cero III triple glazed.
** NOTE TO SPECIFIER ** Delete rail depth not required.
Top & Bottom Rail Depth: 2-1/16 in (52 mm) cero II double glazed.
Top & Bottom Rail Depth: 2-13/16 in (72 mm) cero III triple glazed.
Top & Bottom Rail and Vertical Stile Exposed Face Width: 1-5/16 in (34 mm)
** NOTE TO SPECIFIER ** For installations requiring increased drainage due to exposure, a matching integrated drainage duct system by others is available. Contact NanaWall for more information.
Adjustable Floor Track:
System to be capable of 1/8 in (3 mm) plus height adjustments without removing panels from tracks.
Systems without adjustment capability not acceptable.
Factory fabricated hidden integrated drainage offset duct system.
** NOTE TO SPECIFIER ** Delete drainage type not required.
Drainage down.
Drainage out to the exterior face.
Purenit extension profile with adjustable base, 1-3/4 in (45 mm).
** NOTE TO SPECIFIER ** Delete subparagraph if thermally broken sills are not required.
Aluminum ADA higher weather performance sill inserts.
** NOTE TO SPECIFIER ** Delete the frame types and depths not required.
Fully Recessed Surround Frame Depth: 1-runner 2-15/16 in (75 mm) cero II double glazed.
Fully Recessed Surround Frame Depth: 1-runner 3-1/8 in (79 mm) cero III triple glazed.
Semi-recessed Surround Frame Depth: 1-runner 2-15/16 in (75 mm) cero II double glazed
Semi-recessed Surround Frame Depth: 1-runner 3-1/8 in (79 mm) cero III triple glazed
** NOTE TO SPECIFIER ** Surrounding frame exposure may be 0 to 3-1/8 in (0 to 79 mm), either fully-recessed, semi-recessed or fully exposed.
Surrounding Frame Exposure (in / mm): _____.
Aluminum Extrusions (EN AW-6060 T66 - F-22): AIMgSi0.5 alloy, 6063-T5
Thickness: 0.059 to 0.157 in (1.5 mm to 4 mm)
Thermal Break: Glass fiber reinforced polyamide cross pieces aligned in the same plane through the frame and panels. Offset thermal breaks not acceptable.
** NOTE TO SPECIFIER ** Delete Thickness not required.
Thickness for cero II: 5/8 in (16 mm) at frame; 15/16 in (24 mm) at panel.
Thickness for cero III: 1-3/8 in (34 mm) at frame; 1-1/32 in (26 mm) at panel.
Exposed Aluminum Frame and Track Finish:
** NOTE TO SPECIFIER ** Delete anodized finishes not required. Delete all anodized finishes if using powder coating finish.
Finish; Anodized (AAMA 611): Clear.
Finish; Anodized (AAMA 611): Dark bronze.
Finish; Anodized (AAMA 611): Metallic as chosen from manufacturer's eloxal tone DB finish chart.
** NOTE TO SPECIFIER ** Delete powder coat if not required.
Finish; Powder Coat (AAMA 2604):
** NOTE TO SPECIFIER ** Delete color if not required.
Color: As chosen from manufacturer's powder coating finish chart:
Color: As chosen from manufacturer's standard selection of 50 colors - matte.
Color: As chosen from manufacturer's full RAL selection; high gloss.
Color: As chosen from manufacturer's full RAL selection; matte.
** NOTE TO SPECIFIER ** Delete custom finish if not required.
Finish: ______.
Glass and Glazing:
Safety Glazing: In compliance with ASTM C1036 or ASTM C1048, and ANSI Z97.1 and CPSC 16CFR 1201.
** NOTE TO SPECIFIER ** Delete acoustical performance not required, or delete both if acoustical performance is not relevant.
Glass Acoustical Performance (DIN 52210-3,4): Rw (STC) 43 for cero II
Glass Acoustical Performance (DIN 52210-3,4): Rw (STC) 44 for cero III
** NOTE TO SPECIFIER **
Glazing Units: Double insulated dry glazed with glass stops on the inside.
Glazing Units: Triple insulated glazing units: Dry glazed with glass stops on the inside.
** NOTE TO SPECIFIER ** Delete glass lites not required.
Glass Lites: Standard reduced iron
Glass Lites: Tempered.
Glass Lites: Laminated.
** NOTE TO SPECIFIER ** Delete glass lite thicknesses not required.
Glass Lite Thicknesses in IGU: 1/4 in (6 mm)
Glass Lite Thicknesses in IGU: 5/16 in (8 mm)
Glass Lite Thicknesses in IGU: 3/8 in (10 mm)
** NOTE TO SPECIFIER ** Delete if not required.
Glazing Lite Thickness in IGU: ______.
Glazing rebate ventilation for controlled back ventilation of the panel edge.
** NOTE TO SPECIFIER ** Delete glass lite type not required.
Glass Lite Type: Reduced iron.
Glass Lite Type: Low iron.
Glass Lite Type: Solar bronze.
Glass Lite Type: Solar gray.
Glass Lite Type: Ornilux bird safe.
** NOTE TO SPECIFIER ** Delete if not required.
Alarmed Glazing: Connection wiring to alarm system, position monitoring, locking detection and notification systems such as glass-breakage sensors by others.
Sliding Hardware:
Carriers: Stainless steel carriers on encapsulated self-lubricating dual ball bearing rollers with 'gothic arch design' concealed in the sliding panel aluminum frame profile
** NOTE TO SPECIFIER ** Delete carriers subparagraph not required.
Carriers Attached to Each Sliding Panel: 2
Carriers Attached to Each Sliding Panel: 4
** NOTE TO SPECIFIER ** Delete rail runners not required.
Rail Runners: Single stainless steel rail runners inserted into the floor track for cero II
Rail Runners: Tandem stainless steel rail runners inserted into the floor track for cero III
** NOTE TO SPECIFIER ** Delete floor track not required.
Floor Track: Thermally broken sill floor track.
Floor Track: Non-thermally broken flush sill floor track.
Replaceable Brushes: Integrated on both ends and in front of panel lower rail to ensure clean, smooth wheel/roller operation.
** NOTE TO SPECIFIER ** Delete if not required.
Electrical Drive Assembly: By others.
Locking Systems: Concealed two-point locking mechanism as standard, with 1 in (25 mm) throw in top and bottom adjustable receivers.
** NOTE TO SPECIFIER ** Delete locking handles not required.
Flat 2-Point Locking Handle - Minimalistic: Brushed satin stainless steel.
Flat 2-Point Locking Handle - Contemporary: Brushed satin stainless steel.
Flat 2-Point Locking Handle - Contemporary: Black titanium stainless steel.
Latch Throw: 1 in (25 mm) locking latch in adjustable locking receivers.
Locking points adjustable by plus or minus 3/16 in (5 mm).
Pin locks not acceptable.
** NOTE TO SPECIFIER ** Delete forced entry not required.
Forced entry: Standard.
Forced Entry: Class RC2.
Force Entry: Class RC3.
Other Components:
Vertical Panel Interlock:
** NOTE TO SPECIFIER ** Delete if specifying cero II double glazed product.
Interlock Depth: Determined by structural requirements.
Provide quadruple polyethylene-reinforced Q-Lon seals for vertical panel interlock with no metal-to-metal contact.
Maximum Panel Deflection at Interlock: 1/4 in (7 mm).
Edge Seals: Provide gasket seals all around the frame, inside and outside, and reinforced brushes, both sides and to the front.
Dark bronze anodized, fiberglass reinforced, inserts within head track, sill and side jambs.
Fabrication:
Extruded aluminum frame and rail profiles, sliding hardware, locking hardware and handles, and glass to construct sliding glass wall assembly.
Flush joints.
Each unit factory pre-assembled and shipped KD with all components and installation instructions.
Exposed work to be carefully matched to produce continuity of line and design with all joints.
No raw edges visible at joints.
All-Glass Acoustic Sliding Partitions:
Product: Provide NanaWall PrivaSEE as manufactured by Nanawall Systems, Inc. All glass, top-hung, single track sliding system with glass and vertical and horizontal acoustic seals..
Performance Criteria:
** NOTE TO SPECIFIER ** Forced entry testing results are only applicable for the test unit type of locking. See manufacturer's latest published data regarding performance.
Acoustic Performance (ASTM E90): STC 36
Acoustic Performance (ASTM E1332): OITC 30
Forced Entry (DIN EN 1191): Pass
Single Action Panels with Offset Hinge - Operation / Cycling Performance (DIN EN ISO 12400): 100,000 cycles
** NOTE TO SPECIFIER ** Delete subparagraph if not required or delete any subsequent subparagraphs that are not relevant to the project.
Sustainability Characteristics:
LEED 2009 (v3)
MRc1.1: NanaWall exterior glass wall systems, not demolished in a renovation project, are reused in the same location.
MRc1.2: NanaWall interior glass wall systems, not demolished in a renovation project, are reused in the same location.
MRc2:NanaWall cardboard shipping crates are made of 60 percent recycled material and are 100 percent recyclable.
MRc3:NanaWall's components easily disassemble and reassemble to "Use as salvaged... or reused materials."
IEQc2:NanaWall systems provide natural ventilation in the open position, assisting in the 90 percent required natural ventilation of occupied spaces of ASHRAE 62.1.
EQc8.1: NanaWall glass wall assembly borrowed light brings daylight deeper into the floor plate.
EQc8.2: NanaWall glass wall assemblies provide direct outdoor lines of sight.
LEED v4 for Interior Design and Construction (ID&C)
MRc1:NanaWall can be easily disassembled for salvage and reuse.
EQc7:NanaWall glass wall assembly borrowed light brings daylight deeper into the floor plate.
EQc8:NanaWall glass wall assemblies provide direct outdoor lines of sight.
Design Criteria
Sizes and Configurations: As indicated by the drawings for selected number and size of panels, location of swing panels, and location of tracks and stacking bays.
** NOTE TO SPECIFIER ** Delete unit operation not required.
Unit Operation: Adjustable sliding hardware with top track; sliding type.
Unit Operation: Adjustable sliding hardware with top track; end single action type.
Mounting Type: Top-hung
Panel Configuration: Straight
** NOTE TO SPECIFIER ** Delete stack storage options not required.
Stack Storage Configuration: Perpendicular to wall.
Stack Storage Configuration: Parallel to wall.
Stack Storage Configuration: Remote.
Stack Storage Configuration: Pocket wall.
** NOTE TO SPECIFIER ** Delete if acoustic performance is not required.
Glass Acoustical Performance (ASTM E413 and ASTM E1332):
** NOTE TO SPECIFIER ** Ratings listed are for glass only. The full panel system but will most likely be 7 to 8 dB lower than the glass rating due to sound gasketing.
STC: 34; 3/8 in (10 mm) single, tempered glass.
STC: 36; 3/8 in (10 mm) single, laminated glass.
STC: 35; 1/2 in (12 mm) single, tempered glass.
STC: 38; 1/2 in (12 mm) single, laminated glass.
STC: 36; 9/16 in (15 mm) single, tempered glass.
STC: 40; 9/16 in (15 mm) single, laminated glass.
STC: 41; 3/4 in (19 mm) single, laminated glass.
STC: 42; 13/16 in (21 mm) single, laminated glass.
STC: 45; 1 in (25 mm) single, laminated glass.
Sliding Partition System: Manufacturer's standard top and bottom rail profiles, with head track, stacking bays, side jambs, with dimensions as shown on Drawings.
Provide aluminum head track, side jambs, hinges, and face and edges of top and bottom rails.
** NOTE TO SPECIFIER ** Finishes may be mixed and matched. I.E. tracks can be white with all other aluminum extrusions clear anodized. User must identify and which items get each chosen finish. Delete finishes not required. Delete all anodized finishes if using powder coating finish.
Finish; Anodized (AAMA 611): Clear.
Finish, Anodized (AAMA 611): Dark bronze.
Finish; Anodized (AAMA 611): Black.
Finish; Anodized (AAMA 611): Brushed.
Finish; Anodized (AAMA 611): Post assembly clear coated.
** NOTE TO SPECIFIER ** Specify post assembly clear coat for greater corrosion resistance.
Finish; Powder Coat (AAMA 2604):
** NOTE TO SPECIFIER ** Delete color if not required.
Color: As chosen from manufacturer's full RAL selection; high gloss.
Color: As chosen from manufacturer's full RAL selection; matte.
** NOTE TO SPECIFIER ** Delete custom finish if not required.
Finish: ______.
** NOTE TO SPECIFIER ** Sliding Panel Size (W x H): Up to 49 x 126 in (1.245 x 3.200 m) maximum. Single Action Panels Size (W x H): Up to 43 x 126 in (1.092 x 3.200 m) maximum. The maximum height is based on GANA recommendation for 1/2 in (12 mm) glass. Verify dimensions comply with authorities having jurisdiction.
Sliding Panel Size (W x H): As indicated.
Head Track (W x D): 2-7/8 x 2-3/4 in (73 x 70 mm)
** NOTE TO SPECIFIER ** Delete single action end panel width if not required.
Single Action End Panel Width: 43 in (1.092 m)
** NOTE TO SPECIFIER ** Single Action Non-Entry End Panels (W x H): Dimensions range between 20 in (508 mm) and 43 in (1092 mm). Insert dimension below to meet project requirements. Delete if not required.
Single Action Non-Entry End Panel Width: ______ meeting pocket dimension constraints.
Top & Bottom Rail Depth: 2-1/2 in (64 mm).
Top Rail Width: 4-1/8 in (104 mm)
Bottom Rail Width: 4-1/8 in (104 mm).
Rail End Cap: Male/female interlock.
Sill Type: Floor sockets with No floor track.
Aluminum Extrusions: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard). Thickness: 0.078 in (2.0 mm) nominal.
Glass and Glazing: Safety glazing per ANSI Z97.1, CPSC 16CFR 1201, and ASTM C1036.
Glass Lite: Single
Delete manufacturer's standards glass options not required.
Manufacturer's Standard Glass: 3/8 in (10 mm) single, tempered glass.
Manufacturer's Standard Glass: 3/8 in (10 mm) single, laminated glass, acoustically enhanced.
Manufacturer's Standard Glass: 1/2 in (12 mm) single, tempered glass.
Manufacturer's Standard Glass: 1/2 in (12 mm) single, laminated glass, acoustically enhanced.
Manufacturer's Standard Glass: 9/16 in (15 mm) single, tempered glass.
Manufacturer's Standard Glass: 9/16 in (15 mm) single, laminated glass, acoustically enhanced.
Manufacturer's Standard Glass: 3/4 in (19 mm) single, laminated glass, acoustically enhanced.
Manufacturer's Standard Glass: 13/16 in (21 mm) single, laminated glass, acoustically enhanced.
Manufacturer's Standard Glass: 1 in (25 mm) single, laminated glass.
Edges: Flat butt for all panels. Exposed edges to be flat polished and ground.
Factory Glazing:
Clamp installed for equal distribution of weight.
Glass Edge Top Rail Clearance: 1/8 in (3 mm) maximum, with 7/8 in (22 mm) minimum bite.
Glass installed with bolts only not acceptable.
Sliding Hardware:
Two unidirectional sliding panel carriers that are attached to each panel with a side adjustable stainless steel cast shoe and a stainless steel ball bearing axle.
Carriers: Glass fiber reinforced polyamide wheels with memory effect and polyamide bumpers preventing metal-on-metal contact between top track and carriers
Carrying Capacity: 330 lbs (150 kgs). Two carriers on a panel.
Operation: Single handed. Carriers and panels to be guided into the stacking bay without error and with single hand operation.
Adjustment: Provide specified amount of adjustments without removing panels from tracks.
Hardware for Single Action End Panels:
** NOTES TO SPECIFIER ** The first three subparagraphs are standard. Delete subparagraphs not required.
Offset hinged panel that can swing 170 degrees.
Foot activated floor bolt, with operation from inside only. ]
Overhead door closer with hold-open function. ]
Locking bolt with crank handle at the top rail.
** NOTE TO SPECIFIER ** The first subparagraph is standard. Delete options not required.
Push and pull handles on both sides in brushed stainless steel finish; 11-13/16 in (350 mm) long.
Push and pull handles on both sides in brushed stainless steel finish in custom sizes.
Pull handle with push plate set in brushed stainless steel finish with length of 11-13/16 in (350 mm).
Custom push/pull handles (by others).
No handles but with pull knob in brushed stainless steel finish. Provide template for holes and cut outs needed in glass.
No handles and no knob.
Quick release floor bolt with spring loaded security feature, with operation from inside only.
** NOTE TO SPECIFIER ** The first subparagraph is standard. Delete options not required.
Push and pull handles on both sides in brushed stainless steel finish; 11-13/16 in (350 mm) long.
Push and pull handles on both sides in brushed stainless steel finish in custom sizes.
Pull handle with push plate set in brushed stainless steel finish with length of 11-13/16 in (350 mm).
Custom push/pull handles (by others).
No handles but with pull knob in brushed stainless steel finish. Provide template for holes and cut outs needed in glass.
No handles and no knob.
Bottom rail locking on floor bolt with half mortise cylinder lock, with key operation from inside only.
** NOTE TO SPECIFIER ** The first subparagraph is standard. Delete options not required.
Standard lockset; 1-1/8 in mortise lockset, Yale cam with key on inside and chrome finish, as a temporary construction core.
Small Format Interchangeable Core (SFIC).
Large Format Interchangeable Core (LFIC).
Furnished by Section 08 71 00.
Tubo100 push/pull handles on both sides in brushed stainless steel finish with full mortise cylinder lock at handle height, with thumb turn operation from inside and key operation from outside.
**NOTE TO SPECIFIER ** Delete if not required.
Standard lockset; SFIC rim housing ICR7 as a temporary construction core.
Hardware for Single Action Non-Entry End Panels:
** NOTES TO SPECIFIER ** The first three subparagraphs are standard. Delete options not required.
Offset hinged panel that can swing 170 degrees.
Locking bolt with crank handle at the top rail.
Foot activated floor bolt, with operation from inside only.
Quick release floor bolt with spring loaded security feature, with operation from inside only.
Bottom rail locking on floor bolt with half mortise cylinder lock, with key operation from inside only.
** NOTE TO SPECIFIER ** The first subparagraph is standard. Delete options not required.
Standard lockset; 1-1/8 in mortise lockset, Yale cam with key on inside and chrome finish, as a temporary construction core.
Small Format Interchangeable Core (SFIC).
Large Format Interchangeable Core (LFIC).
Furnished by Section 08 71 00.
Panels with Push/Pull Handles or Knobs: Provide handle height centered at 41-3/8 in (105 cm) from bottom of the panel or as indicated otherwise.
Other Locking:
** NOTE TO SPECIFIER ** Self-activated automatic interlock and seal is a key feature triggered by simply moving one panel into another.
Between Sliding Panels: Self-activated automatic interlock for floor bolts.
Floor Bolts: 1-3/16 in (30 mm) deep, adjustable, eccentric floor sockets.
Other Components:
Horizontal Seals: At top and bottom rails, provide sealing brush with double fins on the inside and self-activated adjustable compression seal on the outside.
Transparent Vertical Edge Acoustical Seals: Between panels, provide UV resistant edge mounted gaskets.
Light Transmission (LT): 75 percent or higher per ASTM D1003.
Vertical Side Jamb Seals: Between side jambs and panels, provide double EPDM seals.
Fabrication
Extruded aluminum frame and rail profiles, sliding hardware, locking hardware and handles, and glass to construct sliding glass wall.
Each unit factory pre-assembled and shipped with all components and installation instructions.
Exposed work to be carefully matched to produce continuity of line and design with all joints.
No raw edges visible at joints.
Accessories: Sidelights with finish to match, as indicated. See Door Schedule.
** NOTE TO SPECIFIER ** Delete if not required.
EXTERIOR ALL GLASS ALUMINUM FRAMED WINDOW WALL SYSTEMS.
Design Criteria:
Sizes and Configurations: As indicated by the drawings for selected number and size of panels, location of swing panels, layout of head, jamb and sill, and location of tracks and stacking bays.
Unit Operation: Slide and pivot.
** NOTE TO SPECIFIER ** Delete configuration not required.
Configuration: Straight.
Configuration: Segmented angled curve.
Configuration: Full circle.
Configuration: 90 degree angle turn.
Configuration: 180 degree angle turn.
Configuration: With open corners.
Stack Storage Configuration: Stack at 90 degree against jamb wall.
** NOTE TO SPECIFIER ** Delete sill not required.
Sill: Standard.
Sill: Flush (recessed).
Maximum Panel (W x H): 31 x 108 in (787 x 2743 mm).
Maximum Panels per Stack: 12.
Maximum Gap Between Panels: 1/8 in (3 mm).
Mounting Type: Top-hung.
Track: Single track at head with adjustable compensating channel and floor.
** NOTE TO SPECIFIER ** Delete finishes not required..
Finish: Anodized (AAMA 611): Clear.
Finish: Anodized (AAMA 611): Dark Bronze.
Finish: Powder Coat (AAMA 2604): Manufacturer's 50 standard color selection.
Finish: Powder Coat (AAMA 2604): Manufacturer's full RAL selection.
Finish: Powder Coat (AAMA 2604): Custom finish.
** NOTE TO SPECIFIER ** Delete gloss - finish option not required.
Gloss - Finish: High Gloss.
Gloss - Finish: Matte.
Glass and Glazing:
Glass Lites: Single.
** NOTE TO SPECIFIER ** Delete glass thickness not required.
Glass Thickness: 1/4 in (6 mm).
Glass Thickness: 5/16 in (8 mm).
Glass Thickness: 3/8 in (10 mm).
Glass Thickness: 1/2 in (12 mm).
** NOTE TO SPECIFIER ** Delete glass type not required.
Glass Type: Tempered.
Glass Type: Laminated.
Glass Type: Bird Safe.
** NOTE TO SPECIFIER ** Contact NanaWall for availability of many other commercial glass and glazing types.
Glass Treatment: None.
** NOTE TO SPECIFIER ** Structural load testing results are only applicable for the test unit size and type of locking and rods. It is anticipated that the installed system's performance would be not more than 66.7 percent of the following certified laboratory test data in accordance with AAMA 503.
Performance Criteria (Lab Tested): Standard Sill.
Structural Loading (ASTM E330) with 1/2 in (12 mm) Tempered Glazing:
Load Structure: At 1.5 times design wind pressure with no glass breakage or permanent damage to fasteners or storefront components.
Reinforced Locking at Turn Panel and Top and Bottom Latches:
Design Pressure Positive: 40 psf (1900 Pa).
Design Pressure Negative: 45 psf (2150 Pa).
Standard Locking at Turn Panel and Top and Bottom Latches:
Design Pressure Positive: 25 psf (1190 Pa).
Design Pressure Negative: 45 psf (2150 Pa).
Water Penetration (ASTM E331) Water Spray Test for 15 Minutes at the Rate of 5 gal./f2/h (3.4 L/m2/min.):
3.1 fluid oz. (0.091 L) at 0 psf (0 Pa); (0.03 percent of total water sprayed).
14.6 fluid oz. (0.43 L) at 1.57 psf (75 Pa); (0.16 percent of total water sprayed).
144 fluid oz. (4.26 L) at 6.24 psf (300 Pa); (1.55 percent of total water sprayed).
Sliding-Pivot All-Glass Entrance and Storefront System: Head, jamb, height compensating profile above head jamb, side jambs, sill, sliding panels, and swing panels with dimensions as shown on Drawings. System without height compensating profile for installation not acceptable.
Provide Model SL25 as manufactured by Nanawall Systems, Inc.
Sliding and Turn Panels: Standard single glass lite with extruded aluminum top and bottom rails.
Top and Bottom Rail:
** NOTE TO SPECIFIER ** Delete rail size not required.
Rail Size - Standard Sill: 1-1/16 x 1-7/8 in (27 x 48 mm).
Rail Size - Recessed Sill: 1-1/16 x 1-11/16 in (27 x 43 mm).
Rail Size - XXL: 1-1/4 x 2-13/16 in (31 x 72 mm).
Swing Door Bottom Rail Size: 1-1/4 x 9-13/16 in (31 x 250 mm).
Aluminum Extrusion: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).
Thickness: 0.059 in (1.5 mm) nominal.
** NOTE TO SPECIFIER ** Choose Turn Panels or Swing Door below, deleting that not selected and edit to project requirements.
Locking Hardware on Turn Panel:
** NOTE TO SPECIFIER ** Select paragraph a. or b below, editing to suit project requirements and deleting that not selected.
Provide manufacturer's standard patented (US Patent No. 6,618,994) spring tensioned cable and concealed top and bottom latches made of high density plastic operated by
Pull of cable on the inside only for an inswing unit.
The turn of a knob on the inside only for an outswing unit.
** NOTE TO SPECIFIER ** Option below will not prevent unauthorized entry from the outside. Access from the outside will not be available if reinforced special locking is engaged.
Turn of knobs located on both sides.
Provide reinforced special locking.
** NOTE TO SPECIFIER ** Key operation from the inside will not meet egress requirements and testing results will not apply with this option. Turn Panel is not meant to be used as a regularly used swing panel, and is not burglar resistant.
Provide a center latch engaging into a strike plate mounted on the adjacent sliding panel operated by level handles on both sides and lockable with key cylinders from either side.
** NOTE TO SPECIFIER ** Delete if not required.
Light Commercial Swing Door: Furnished by Section 08 41 23 - Steel-Framed Entrances and Storefronts.
Hardware: Provide standard hardware as follows:
Door Closer: Floor Mounted Geze TS 500 NV.
Key Cylinder Lock: Bottom rail mounted; for cylinder core see Section 08 71 53 - Security Door Hardware.
Push-Pull Handles: Gray anodized aluminum.
Sliding Hardware: Provide manufacturer's standard hardware.
For each sliding panel, provide two wheeled unidirectional sliding panel carriers with running surface of glass fiber reinforced polyamide.
Each Carrier Minimum Carrying Capacity:
80 lbs. (36 kg) for Standard SL25 Panel.
143 lbs. (65 kg) for SL25XXL Panel.
Other Components:
Threshold - Standard Sill: Extruded aluminum.
** NOTE TO SPECIFIER ** Delete finish not required.
Finish: Clear anodized finish.
Finish: Bronze anodized finish.
Finish: Powder coat finish to match panels.
Threshold - Flush Sill (Recessed): Aluminum.
** NOTE TO SPECIFIER ** Delete finish not required.
Finish: Clear anodized finish.
Finish: Bronze anodized finish.
Weatherstripping: ATPK and brush seals between panels and between panel and frame.
Fasteners: Stainless steel machine screws.
** NOTE TO SPECIFIER ** Models HSW75, FSW75 and CSW75. Delete if not required.
INTERIOR ALL GLASS ALUMINUM FRAMED WINDOW WALL SYSTEMS.
All Glass Folding Partition: All glass, top-hung, single track hinged-panel folding system with no vertical profiles. Manufacturer's standard top and bottom channel frame and panel profiles, with head track, floor track, side jambs, folding-swing panels with dimensions as shown on Drawings.
Product: Model FSW75 as manufactured by Nanawall Systems, Inc.
** NOTE TO SPECIFIER ** Panels hinged off the side jamb are available with a minimum of 1 panel and a maximum of 6 panels from either the right and/or the left side of the opening. For even larger widths, optional unlimited floating panels are offered in 2 or 4 panel increments.
Sizes and Configurations: As indicated by the drawings for selected number and size of panels, and location of swing panels.
** NOTE TO SPECIFIER ** Delete unit operation not required.
Unit Operation: Folding type.
Unit Operation: Folding single action type.
** NOTE TO SPECIFIER ** Delete panel type not required.
Panel Type: Single
Panel Type: Paired
** NOTE TO SPECIFIER ** Delete panel configuration not required.
Panel Configuration: Straight
Panel Configuration: 90 degree angle turn/ open corner
Panel Configuration: Window/ door combination.
Sill Type: Floor track with anodized guide track.
** NOTE TO SPECIFIER ** Maximum W x H folding panel sizes up to 126 x 39 in (3.200 x 1.000 m). Max. W x H folding single/double action panel sizes up to 126 x 39 in (3.200 x 1.000 m). Max. W x H non-folding single/double action panel sizes up to 126 x 43 in (3.200 x 1.092 m).
Panel Size (W x H): As indicated.
Panels: Single lite.
Head Track (W x D): 2-7/8 x 2-3/4 in (73 x 70 mm).
Top & Bottom Rail Depth: 1-7/16 in (36 mm).
** NOTE TO SPECIFIER ** Delete top rail widths not required. First option below is standard.
Top Rail Width: 3-15/16 in (100 mm).
Top Rail Width: 5-1/4 in (133 mm).
** NOTE TO SPECIFIER ** Rail widths available in 3/16 in (5 mm) increments from 5-1/4 in (133 mm) to 7-13/16 in (198 mm).
Top Rail Width (in / mm): ______.
Top Rail Width: 7-13/16 in (198 mm).
Top Rail Width: 10 in (254 mm).
** NOTE TO SPECIFIER ** Delete bottom rail widths not required. First option below is standard.
Bottom Rail Width: 3-15/16 (100 mm).
Bottom Rail Width: ADA, chamfered door bottom rail, 4-5/8 in (117 mm).
Bottom Rail Width: 5-1/4 in (133 mm).
Bottom Rail Width: 7-13/16 in (198 mm).
Bottom Rail Width: ADA, 10 in (254 mm) kickplate.
Rail End Cap: Smooth with bumpers on one panel end mitered at corner panels.
Finish: Closest aluminum match to rail finish.
Edges: Flat mitered at corner panels.
Aluminum Extrusions: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).
Thickness: 0.078 in (2.0 mm) nominal.
All Glass Center Pivot Partition: All glass, top-hung, single track folding system with no vertical profiles. Manufacturer's standard top and bottom channel frame and panel profiles, with head track, floor sockets, side jambs, folding-swing panels with dimensions as shown on Drawings.
Product: Model CSW75 as manufactured by Nanawall Systems, Inc.
** NOTE TO SPECIFIER ** Panels hinged off the side jamb are available with a minimum of 1 panel and a maximum of 6 panels from either the right and/or the left side of the opening. For even larger widths, optional unlimited floating panels are offered in 2, 3 and/or 4 panel increments.
Sizes and Configurations: As indicated by the drawings for selected number and size of panels, and location of swing panels.
Unit Operation: Center pivot single action type.
** NOTE TO SPECIFIER ** Delete panel type not required.
Panel Type: Single
Panel Type: Paired
** NOTE TO SPECIFIER ** Delete panel configuration not required.
Panel Configuration: Straight.
Panel Configuration: 90 degree angle turn/ open corner.
Panel Configuration: Window/ door combination.
Sill Type: Floor sockets with No floor track or sill.
** NOTE TO SPECIFIER ** Maximum W x H center pivot panel sizes up to 126 x 39 in (3.200 x 1.000 m). Max. W x H folding single/double action panel sizes up to 126 in x 39 in (3.200 x 1.00 m). Max. W x H non-folding single/double action panel sizes up to 126 in by 44 in (3.200 m by 1.118 m).
Panel Size (W x H): As indicated.
Panels: Single lite.
Head Track (W x H): 2-7/8 x 2-3/4 in (73 x 70 mm)
Top & Bottom Rail Depth: 1-7/16 in (36 mm)
Top Rail Width: 3-15/16 (100 mm)
** NOTE TO SPECIFIER ** Option above is standard with options below. Delete rail width not required.
Top Rail Width: 5-1/4 in (133 mm).
** NOTE TO SPECIFIER ** Rail widths available in 3/16 in (5 mm) increments from 5-1/4 in (133 mm) to 7-13/16 in (198 mm).
Top Rail Width: 7-13/16 in (198 mm).
Top Rail Width: 10 in (254 mm).
** NOTE TO SPECIFIER ** Delete bottom rail widths not required. First option below is standard.
Bottom Rail Width: 3-15/16 (100 mm) kick plate.
Bottom Rail Width: ADA, chamfered door bottom rail, 4-5/8 in (117 mm).
Bottom Rail Width: 5-1/4 in (133 mm).
Bottom Rail Width: 7-13/16 in (198 mm).
Bottom Rail Width: ADA, 10 in (254 mm) kickplate.
Rail End Cap: Smooth with bumpers on one panel end mitered at corner panels.
Finish: Closest aluminum match to rail finish.
Edges: Flat mitered at corner panels.
Aluminum Extrusions: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).
Thickness: 0.078 in (2.0 mm) nominal.
Sliding Glass Partition: All glass, top-hung, single track sliding system with no vertical profiles, and a 2-in-1 release system allowing for a selected sliding panel to convert into a single/double action panel or vise versa. Manufacturer's standard top and bottom channel frame and panel profiles, with head track, stacking bays, side jambs, sliding-swing panels with dimensions as shown on Drawings.
Product: Model HSW75 as manufactured by Nanawall Systems, Inc.
Sizes and Configurations: As indicated by the drawings for selected number and size of panels, and location of swing panels.
** NOTE TO SPECIFIER ** Delete unit operation not required.
Unit Operation: Sliding type.
Unit Operation: Sliding single/double action type.
Unit Operation: End single/double action type.
** NOTE TO SPECIFIER ** Delete panel configuration not required.
Panel Configuration: Straight.
Panel Configuration: Segmented curve.
Panel Configuration: True curve.
Panel Configuration: 90 degree angle turn/ open corner.
Panel Configuration: 135 degree angle turn.
Panel Configuration: Window/ door combination.
** NOTE TO SPECIFIER ** Delete stack storage configuration not required.
Stack Storage Configuration: Parallel to jamb
Stack Storage Configuration: Parallel to wall
Stack Storage Configuration: Remote.
Stack Storage Configuration: Pocket wall.
Mounting Type: Top-hung.
Sill Type: Floor sockets with No floor track.
Maximum W x H sliding panel sizes up to 126 x 49 in (3.2 x 1.25 m). Max. W x H sliding single/double action panel sizes up to 126 x 39 in (3.200 x 1.000 m). Max. W x H non-sliding single/double action panel sizes up to 126 x 43 in (3.200 x 1.100 m).
Panel Size (W x H): As indicated.
Panels: Single lite.
Head Track (W x D): 2-7/8 x 2-3/4 in (73 x 70 mm)
Top & Bottom Rail Depth: 1-7/16 in (36 mm)
Top Rail Width: 3-15/16 (100 mm)
** NOTE TO SPECIFIER ** Option above is standard with options below. Delete rail width not required.
Top Rail Width: 5-1/4 in (133 mm).
** NOTE TO SPECIFIER ** Rail widths available in 3/16 in (5 mm) increments from 5-1/4 in (133 mm) to 7-13/16 in (198 mm).
Top Rail Width: 7-13/16 in (198 mm).
Top Rail Width: 10 in (254 mm).
Bottom Rail Width: 3-15/16 (100 mm).
** NOTE TO SPECIFIER ** Option above is standard with options below. Delete rail width not required.
Bottom Rail Width: ADA, chamfered door bottom rail, 4-5/8 in (117 mm).
Bottom Rail Width: 5-1/4 in (133 mm).
Bottom Rail Width: 7-13/16 in (198 mm).
Bottom Rail Width: ADA, 10 in (254 mm) kickplate.
Rail End Cap: Smooth with bumpers on one panel end mitered at corner panels.
Rail End Cap Finish: Closest aluminum match to rail finish.
Rail Edges: Flat mitered at corner panels.
Aluminum Extrusions: AIMgSi0.5 alloy, 6063-T5 (F-22 - European standard).
Thickness: 0.078 in (2.0 mm) nominal.
Finish: Aluminum head track, hinges/pivot points and face of top and bottom rails.
** NOTE TO SPECIFIER ** Delete anodized and powder coat finish options that are not required.
Anodized (AAMA 611): Clear
Anodized (AAMA 611): Dark bronze
Anodized (AAMA 611): Black
Anodized (AAMA 611): Brushed
Powder Coat (AAMA 2604): Color as chosen from manufacturer's powder coating finish chart from RAL selection.
Powder Coat (AAMA 2604): Custom finish as specified by the Architect.
** NOTE TO SPECIFIER ** Delete gloss option not required.
Gloss - Finish: High Gloss.
Gloss - Finish: Matte.
** NOTE TO SPECIFIER ** Specify post assembly clear coat for greater corrosion resistance.
Finish: Post assembly clear coated
** NOTE TO SPECIFIER ** Delete metal cladding options not required. First option below is for HSW75 and CSW75 only.
Metal Cladding: Aluminum Finish on Face of Top and Bottom Rails:
Metal Cladding: Brushed stainless steel
Metal Cladding: Polished stainless steel
Metal Cladding: Polished brass
Metal Cladding: Satin brass
Glass and Glazing:
** NOTE TO SPECIFIER ** FSW75 and CSW75 limited to 1/2 in glass. Delete glass for HSW75 not required.
Glass Thickness: 1/2 in (12 mm).
Glass Thickness: 3/8 in (10 mm).
Glass Thickness: 9/16 in (15 mm).
Glass Thickness: 3/4 in (19 mm).
Glass Thickness: 13/16 in (21 mm).
Glass Thickness: 1 in (25 mm).
** NOTE TO SPECIFIER ** Delete glass type not required. Contact NanaWall for availability of many other commercial glass and glazing types.
Glass Type: Tempered.
Glass Type: Laminated.
** NOTE TO SPECIFIER ** Delete if acoustic performance is not required..
Glass Acoustical Performance (ASTM E413 and ASTM E1332):
** NOTE TO SPECIFIER ** Acoustical ratings listed below are for the glass only and not the full panel system but will most likely be 7 to 8 dB lower than the glass STC rating when the sound gasketed framing is added. FSW75 and CSW75 limited to 1/2 in glass. Delete glass for HSW75 not required.
STC: 35; 1/2 in (13 mm) single, tempered glass.
STC: 38; 1/2 in (13 mm) single, laminated glass.
STC: 34; 3/8 in (10 mm) single, tempered glass
STC: 36; 3/8 in (10 mm) single, laminated glass
STC: 36; 9/16 in (15 mm) single, tempered glass
STC: 40; 9/16 in (15 mm) single, laminated glass
STC: 41; 3/4 in (19 mm) single, laminated glass
STC: 42; 13/16 in (21 mm) single, laminated glass
STC: 45; 1 in (25 mm) single, laminated glass
Hardware:
Performance Criteria (Lab Tested):
** NOTE TO SPECIFIER ** Forced entry testing results are only applicable for the test unit type of locking. See manufacturer's latest published data regarding performance.
Forced Entry (DIN EN 1191): Pass.
Single/Double Action Panels with Pivot Points - Operation / Cycling Performance (DIN EN ISO 12400): 100,000 cycles.
** NOTE TO SPECIFIER ** Refer to manufacturer's literature for hardware options.
Carrier Hardware: Manufacturer's standard.
Hinge Hardware: Manufacturer's standard.
Locking Hardware: As available from manufacturer selected by Architect.
Handles: As available from manufacturer selected by Architect.
Push/Pull Handles, Knobs, Rosettes, or Panic Devices: As available from manufacturer selected by Architect.
** NOTE TO SPECIFIER ** Delete if not required.
Accessory Components:
Edge Seals: Provide sealing brush for outside of top rail.
** NOTE TO SPECIFIER ** Bumpers prevent metal-to-metal or glass-to-glass contact.
Bumpers: Provide recessed soft polyamide bumpers on one end of sliding panel end caps at the top and bottom.
** NOTE TO SPECIFIER ** Gaskets help reduce glass-to-glass contact, sound transmission, and airflow.
Gaskets Between Panels: Clear UV resistant edge mounted gaskets.
** NOTE TO SPECIFIER ** Delete accessories not required.
ACCESSORlES
** NOTE TO SPECIFIER ** Screen ONE is ' non-pleated' while Screen Classic is ' pleated.' Select ' ONE' or 'Classic,' deleting option not chosen.
Insect Screen Panels: Fully retractable non-pleated screen made of ultra-strong, UV resistant fiberglass mesh housed in a single cartridge riding on a single track.
Basis of Design Product by Manufacturer: Screen ONE or an Architect acceptable equivalent subject to project requirements.
Finish - Aluminum Top Track, Side Jambs and Vertical Struts:
** NOTE TO SPECIFIER ** Delete finishes not required. Check with NanaWall regarding other available finishes,
White powder coated.
Clear anodized.
Black powder coated.
Classic bronze powder coated.
Insect Screen Panels: A series of top-hung collapsible pleated UV resistant fiberglass mesh screen panels riding on a single narrow ADA compliant 1/4 in (6 mm) floor track. Each 4 in (102 cm) wide vertical cassette can expand to 39 in (1 m) wide.
Product: Screen Classic as manufactured by Nanawall or an Architect acceptable equivalent subject to project requirements.
Finish - Aluminum Top Track, Side Jambs and Vertical Struts:
** NOTE TO SPECIFIER ** Delete finishes not required. Check with NanaWall regarding other available finishes,
White powder coated
Clear anodized
Dark bronze anodized
RN powder coated with color as selected by architect.
Screen Track Stacking: Within opening or extended beyond opening as indicated or required.
EXECUTION
EXAMINATION
Because of the large dimensions involved and the weight and movement of the panels, verify the structural integrity of the header such that the maximum deflection with both the live and dead loads is limited to be the lesser of L/720 of the span and 1/4 in (6 mm).
Examine surfaces of openings and verify dimensions. Verify rough openings are level, plumb, and square, with no unevenness, bowing, or bumps on floor. Do not begin installation until openings have been properly prepared.
PREPARATION
Prepare openings using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
INSTALLATION
Install frame in accordance with manufacturer's recommendations and installation instructions. Properly flash and waterproof around the perimeter of the opening.
** NOTE TO SPECIFIER ** Delete if not required.
Finishing: Field finish under Section 09 90 00 - Painting and Coating.
** NOTE TO SPECIFIER ** Delete if not required.
Accessories: Screens; install in accordance with screen manufacturer's recommendations and installation instructions.
PROTECTION
Protect installed products until completion of project.
END OF SECTION ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.