Division:
HARRISBURG AREA COMMUNITY COLLEGE
FORM 335
Course Form 335 must be updated at least every five years to qualify for state reimbursement.
1. Digital Description [§335.2]:
Credit hours: 2.0
Lecture hours: 1.0
Lab hours: 2.0
2. Catalog Description [§335.2]:
Provides the knowledge and skills to cut and weld metals commonly found at the construction site. Students set up and operate oxy-fuel torches to cut metal to shape and dimension. Students also use shielded metal arc welding equipment to fuse metal for fabrication.
Minimum Grade Required
3. Prerequisites: UBC 110 C
Corequisites:
Other:
4. Learning Outcomes [§335.2]
Upon successful completion of the course the student will be able to:
• Describe the safety precautions employed around welding equipment
• Explain the operation and application of the oxy-fuel system.
• Use the oxy-fuel system to cut metal to shape
• Explain the operation and application of shielded metal arc welding
• Identify the types and applications of shielded metal arc electrodes
• Set up and adjust shielded metal arc welding equipment for use
• Demonstrate proper arc striking techniques
• Weld metal parts using proper technique
• Perform a visual inspection of welds and determine quality
5. Planned Sequence of Learning Activities [§335.2]
The planned sequence of learning activities includes:
A. Safety training 3 hours
B. Oxy-fuel orientation 5 hours
C. Oxy-fuel cutting lab 5 hours
D. SMAW orientation 5 hours
E. SMAW electrodes and applications 3 hours
F. SMAW lab 20 hours
G. Inspect weldments for quality 4 hours
6. List of Texts, References, Selected Library Resources or other Learning Materials (code each item based on instructional use: C-lecture/lab, A-lecture, B-lab, I-internet, and V-videocourse) [§335.2
Textbook: Koel, Leonard. Carpentry, Fourth Edition. Homewood, IL: American Technical Publishers, Inc. 2004.
Workbook: Koel, Leonard. Carpentry Workbook, Fourth Edition. Homewood, IL: American Technical Publishers, Inc. 2004.
7. Prepared by Faculty Member: Edward Burns Date: 10/1/07
8. Approved by Dean: William R. Thompson Date: 10/1/07
This course meets all reimbursement requirements of Chapter 335, subchapters A / B.
This course was developed, approved, and offered in accordance with the policies, standards, guidelines, and practices established by the College. It is consistent with the college mission.
If the course described here is a transfer course, it is comparable to similar courses generally accepted for transfer to accredited four-year colleges and universities.
Whether transfer or career, this course is articulated with other courses so that it is an elective or a requirement of one of the college programs and it does not require students to have more than 30 credit hours of post secondary study prior to enrolling in the program.
9. VP, Academic Affairs and Enrollment Management: Ronald Young
Date: 11/05/07
10. Original Date of course approval by the college: 12/14/07
11. Date(s) of subsequent reviews:
12/1/04
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- craft and structure
- therapeutic garden design book list american society of
- winner of the 2009 cordon d or gold ribbon award goes to
- pneutek inc university of houston law center
- case 7 fema
- vendor list 449 vendors
- book glantz sa 2012 primer of biostatistics seventh
- mutual press release
- technical manual sec 6 ch 1 hospital investigations