Myosuploads3.banggood.com



Product Description

[pic] [pic]

[pic]

Key Functions

Power Key

·Long press to turn on

·Short press to breathing screen / bright screen function screen display when in state of the watch interface

·Short press to return to home page when in state of secondary menu and less one.

·Press and hold 2 seconds, in ON state, to enter interface of shutdown / restart / super power saving / recent task selection interface

·Press and hold the power button for 10 seconds to restart the system if watch crashes

Returen Key

·Short press once to return to the previous menu interface

·Open the watch cover, the watch will automatically enter the camera preview interface of the rear camera;

Close the watch cover, the watch will exit the camera preview interface and enter the watch system interface

SIM Card Installation

·Currently only NANO SIM Card is supported for this watch

·Please confirm the watch is turned off first. Use a special screwdriver to open the SIM cover. After installing the SIM card, please kindly replace the SIM card cover and tighten the screws to avoid damage to the watch due to liquid such as sweat and water entering the watch.

· Support Brand

GSM:B2/B3/B5/B8

WCDMA:B1/B2/B5/B8

TDS-CDMA:B34/39

TDD LTE:B1/B2/B3/B5/B7/B8/B12/B17/B20

FDD LTE:B38+B39+B40+B41(100MHz)

Charging the Watch

·Please charge the watch fully at first time. It is equipped with a magnetic charging interface. Please connect with the magnetic cable before connecting the power supply (It is recommended to use 5V 1A and above chargers).

[pic]

Operation Methods

Long press: When the watch is on the watch interface, long press for about 2 seconds you will enter the watch face setting mode. You can select or download any of the available.

Single Press: Select function or confirm function

Slide up: In the watch interface, sliding up to enter the step count chart of this week;

Slide down: In the watch interface, slide down to enter the basic information page (battery level, date and time, SIM card and network information, BT connection status)

Slide left: In the watch interface, slide left to enter the system main menu

Slide right: In the watch interface, slide right to enter the notification interface

* APK Download and BT Pairing

APK Download

Scan QR Code: mobile assistant -- connect mobile phone -- click the question mark icon at the top of the screen, scan QR code, download and install

Android Mobile: Search “Wiiwatch 2” in Google play store to download and install

IOS Mobile: Search "Wiiwatch2" in Apple App store to download and install

Note: Wiiwatch 2 app supports IOS 11.1 and above, Android 6.0 and above

BT pairing

1. First of all, please turn on BT for your watch and mobile phone

2.Open the Wiiwatch 2 on the mobile phone, scan the watch -- Mobile assistant -- connect the QR code in the mobile phone option for BT pairing; After the pairing is successful, the app interface will display “connected” (during BT pairing, the mobile terminal will pop up “authorization notice permission”, which needs to be allowed by clicking).

[pic][pic]

[pic]

3. After the connection is successful, functions such as music control, device searching and application reminder can be realized;

Main Functions

The basic applications included are: Contacts, Phone, Messaging, Setting, Browser, Downloads, Calendar, Clock, Gallery, Music, Sound Recorder, File Manager, Fitness, Weather, Voice Search, Play Store, Maps, Camera, Heart Rate Monitor and Mobile Assistant, Google Translation, APP Store. (The main function may add or remove based on the real requirement, all should refer to the actual watch)

Tips：

※ The charging line of the watch is the contact of the magnetic suction thimble. Please kindly make sure that the charger is normal to ensure good contact when charging, and the position of the magnetic suction contact is free of foreign matters and dirt. The battery of the watch cannot be disassembled. Due to the loss of the product itself, the product may not be started due to the battery power failure after being idle for more than one month. Please charge the battery regularly every week to ensure the normal operation of the device.

※ After the smart watch is placed for a long time, it will take more than 10 minutes to display the charging icon if the computer USB is used for charging. Please wait patiently. It is recommended to use a 5V 1A and above charger for charging.

※ A wrong use of the device could cause it to crash. Please keep pressing

the power button for at least 10 seconds to restart the watch.

※ The power consumption of the watch will be relatively large when using

the high-energy program such as mobile network, dial call, Internet, video,

etc., and the machine may be slightly hot, It is normall. If the machine

prompts a high temperature alarm, please reduce the use of such high power

applications.

[pic]

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download