GPS102-B User Manual



GSM/GPRS/GPS TRACKER

MANUAL

[pic]

Preface

Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.

1. Summary

Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

|Content |Specs |

|Dim. |61mm x 21mm x 42mm |

|Weight |38g |

|Network |GSM/GPRS |

|Band |850/900/1800/1900Mhz |

|GSM chip |MT6261D |

|GPS chip |Ublox 7020 |

|GPS sensitivity |-159dBm |

|GPS accuracy |5m |

|Time To First Fix |Cold status 45s |

| |Warm status 35s |

| |Hot status 1s |

|Car charger |12—24V input |

| |5V  output |

|Wall charger |110－220V input |

| |5V  output |

|Battery |Chargeable changeable 3.7V 700mAh Li-ion battery |

|Storage Temp. |-40°C to +85°C |

|Operation Temp. |-20°C to +55°C |

|Humidity |5%--95% non-condensing |

2.Led indicator status

|LED INDICATOR STATUS |MEANING |

|RED LED continuously work |Charging |

|RED LED not lit |Fully charged |

|Green LED Flashing |Success get GSM singnal |

|Green LED continuously lit |Searching GSM signal |

3. the operation

Weclome use the device, the operation guide will guide you how do use.

Note :right way insert 2 GSM sim cards( can call. SMS and GPRS internet function, Have enough fee,Make sure that there is no call transfer and PIN code ,with call display and Can success call)

3.1 Open the back cover, Put the SIM card into the as picture shows.

1).open the back cover screws

2).Open on the left side of the USB plug

3). Open the back cover

4). Open the PCBA board screw ，Open the back board

5).  open the SIM card slot and inserted SIM card

6) refixed PCBA, fixed screw, Fixed back cover and USB plug, Then tighten the screws

3.2 inset battery, then charge the battery in time to keep it working normally

3.3 pls take the device to outdoor and the front of device towards sky ,move device to receive gps singnal. Beause indoor has no gps signal

3.4 Use mobile phone call the device, hang up and report a real-time Geo-info as below( if GPRS mode,device will not reply position after call):

[pic]

1): longitude and latitude coordinate

2): Speed:000.2 : This indicates the last known speed of the unit

3): T:07/01/16 01:48 : The date and time stamp when the unit last received a GPS signal for London time

4): Google Maps link:This is the link to the Google map showing the position of the tracker unit.When click the link, if a map is displayed, there is GPS information for the unit. If there is no may, there is no GPS information for the tracker.

Open google link,can see address of map

3.5 When GPS signals is weak,if in 10s,GPS can not location,will use LBS location,the replied SMS as below:

[pic]

Mean no gps signal Can't locate, answer Last Geo-info is last time position information. Now is LBS position information.

Get absolute street address LAC: Location Area Code

CID:Cell Identity

MCC:Mobile Country Code

MNC:Mobile Network Code

When the tracker device doesn’t received valid GPS signals, tracker will locate by LBS.

mand instruction

NOTE(Device default password:123456)

use of mobile phones send text messages to the device sim card about all set command

Use mobile phone call the device, hang up and get goole link address

| NAME |COMMAND |FOR EXAMPLE |reply |

|Initialization |begin+password |begin123456 |begin ok |

|change password |password+old pass+space+new pass |password123456 888888 |password ok |

|set authorized number |admin+password+space+phone umber |admin123456 13813813813 |admin ok |

|cancel authorized number |noadmin+password+space+phone umber |noadmin123456 13813813813 |noadmin OK |

|Set GMT time zone number |time zone+password+space+ local time zone |time zone123456 8 |time zone OK |

|route record |gpx+password |Gpx123456 |Gpx ok |

|(need tf card) |t001m***n+password |t001m***n123456 |tn ok |

|battery check |check+password |check123456 | |

|IMEI check |IMEI+password |IMEI123456 |IMEI number |

|Switch to the SMS mode |SMS+password |SMS123456 |SMS Ok |

|Switch to the GPRS mode |gprs+password |gprs123456 |GPRS OK |

If Set authorization number, other cell-phone Numbers to send command will not reply

SET ONLINE TRACKING

|NAME |COMMAND |FOR EXAMPLE |reply |

|Switch to the GPRS mode |gprs+password |gprs123456 |gprs ok |

|IP |adminip123456 ip port |adminip123456 47.90.72.45  12022 |APN ok |

|Set Upload the frequency|t002m***n+password |t002m***123456 |002m***n OK |

|APN |apn+password+space+apn content |apn123456 cmnet |APN ok |

NOTE: If set the front three COMMAND online, no need to set the APN.(the default no need to set the APN)

If platform off line, pls set apn command

START ONLINE TRACKING

Note: sim card Must turn on GPRS function

about Platform : or

Account: register by self

Registered video:



APPLICATIONS FOR ANDROID/IOS

Scan the QR code to install the applictions on your android mobile

[pic]

ANDROID download link:



IOS:search gps server in the Apple app store

click set button ,click server ---click custom server url ---- fill ok

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download