Inventoryscience.com



Generic Scanner Settings for Honeywell 1250G barcode ScannerBase SettingsScan Barcodes 1, 2 and 3 before configuring the scanner1This will erase any previous scanner settings.2This will activate the factory default settings3Turns off the scanner good-read beep so that you only hear a beep when the ScanShark accepts the scan data.UPC-A (12-digit) Additional configuration barcodes begin on page 6-35 of the barcode scanner manual4Default UPC-A settings: Include first number (leaddigit)Include last number (checkdigit)5UPC-A Number System Off. The first number of the UPC-A barcode (lead-digit) will NOT be transmitted.6UPC-A Check-Digit OFF. The last number of a UPC-A barcode (checkdigit) will NOT be transmitted.UPC-E (8-digit) Additional configuration barcodes begin on page 6-41 of the barcode scanner manual7Default UPC-E settings: Include first number (leaddigit)Do NOT send last number (checkdigit)Do NOT expand to UPC-A (12Digit format)8UPC-E include the Check-digit9Converts short (8-digit barcodes) to the 12 digitUPC barcode10UPC-E Number System OFF. Do NOT send first number (leaddigit)Add Prefix This example will add a single zero to the beginning of the barcode data. For extra leading zeros, repeat scanning barcodes 14 and 15 before scanning the SaveBarcode (Barcode Number: 16)11Sets scanner to include a prefix (leading digits) to the barcode12This and next barcode let the scanner know that all barcodes will have the prefix added13Continued...14This and the next barcode will add a single Zero to the beginning of each scan15Continued….16This will save your settings.Generic Scanner Settings for 1250G Revised: April 12, 2017? Copyright 2017 Inventory Science Systems, LLC, Concrete, WA 98237 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download