Ussvisandiego.org



USSVI San Diego Base Submarine FloatStyrofoam Repair Method531177545720CAUTION: Do not use fillers or adhesives with volatile chemicals.The safest repair is using a water based filler or water based glue. Using any other chemical must be tested on the sample block before applying to the float Styrofoam.Repair of a sail plane:1- Clear damaged area of loose material.2- If the damage is large, then create a wood spacer for strength.3- Add some White DAP Plastic Wood to the wood spacer for adhesion.4- Build up the repair in layers. Ensure dry before adding more filler.5- Sand excess filler to match contour of the sub.6- Paint repair area.Original float paint: Behr Premium Plus Ultra #UL240-1 Black Sapphire Flat Exterior-8890914402787650838204445635209169038100To fill a deep hole in the submarine hull, cut a dowel or piece of foam from the styrofoam test block. Insert into the hole, cut off excess, smooth over with wood filler, sand and paint. SubFloat Repair.docx. 12/14/19, DJKauppinen**Document is on ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download