ARCAT, Inc.

 SECTION 06 41 20CABINET AND DRAWER HARDWAREDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2007 - 2015 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** Blum, Inc.; cabinet and drawer hardware..This section is based on the products of Blum, Inc., which is located at:7733 Old Plank Rd.Stanley, NC 28164Toll Free Tel: 800-438-6788Tel: 704-827-1345Fax: 704-827-0799Email: request info (sales.us@)Web: | dynamicspace.us [ Click Here ] for additional information.Blum, Inc. is a leading manufacturer of functional hardware for the cabinet and furniture industry specializing in concealed hinges and drawer runner systems. Blum's manufacturing and distribution complex in Stanley, North Carolina supplies the North American market through a network of 150 dependable distributors.

GENERAL

SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

Cabinet and drawer hardware of the following types:

Lift systems.

Concealed hinge systems.

Drawer runner systems.

Box systems.

Electronic opening systems.

RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

Section 06 41 13 - Wood-Veneer-Faced Architectural Cabinets.

Section 08 81 00 - Glass Glazing.

Section 12 32 16 - Manufactured Plastic-Laminate-Clad Casework.

Section 26 05 00 - Common Work Results for Electrical.

REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

ANSI/BHMA - Meets Grade 1 - drawer runner systems. Grade 2 - hinge systems. Requirements for cycle life, static load and self-closing performance.

SUBMITTALS

Submit under provisions of Section 01 30 00 - Administrative Requirements.

Product Data: Manufacturer's data sheets on each product to be used, including:

Preparation instructions and recommendations.

Storage and handling requirements and recommendations.

Installation methods.

Verification Samples: For each finish specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

QUALITY ASSURANCE

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and function.

Do not proceed with remaining work until mock-up is approved by Architect.

Remodel mock-up area as required to produce acceptable work.

DELIVERY, STORAGE, AND HANDLING

Store products in manufacturer's unopened packaging until ready for installation.

PROJECT CONDITIONS

Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

PRE-INSTALLATION MEETINGS

Convene minimum two weeks prior to starting work of this section.

SEQUENCING

Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

PRODUCTS

MANUFACTURERS

Acceptable Manufacturer: Blum, Inc., which is located at: 7733 Old Plank Rd.; Stanley, NC 28164; Toll Free Tel: 800-438-6788; Tel: 704-827-1345; Fax: 704-827-0799; Email: request info (sales.us@); Web: | dynamicspace.us

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

Substitutions: Not permitted.

Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Lifting cabinet doors up and out of the way. AVENTOS lift systems move doors up and out of the way, allowing complete access while not interfering with work in the kitchen. Link to literature: . Delete if not required.

LIFT SYSTEMS

** NOTE TO SPECIFIER ** With AVENTOS HF, bi-fold doors lift up and out of the way. Link to literature: . Delete if not required.

Approved Product: Blum AVENTOS HF bi-fold lift system

Cabinet Construction:

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Narrow aluminum frame door.

Lift type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Bi-fold lift mechanism

Bi-fold lift mechanism with SERVO-DRIVE: Electric opening of the door with just a light touch of the front.

Cabinet Height Range:

18-7/8 inches (479 mm) - 42 inches (1067 mm).

Cabinet Width Range:

15 inches (381 mm) - 72 inches (1828 mm).

Dampening System: Self-regulates the closing speed of the door.

Integrated.

Mounting:

Screw-on.

** NOTE TO SPECIFIER ** Delete items below not required for project.

Accessories:

Angle restriction clip: Part No. ________

SERVO-DRIVE: Electric opening of the door with just a light touch of the front.

** NOTE TO SPECIFIER ** AVENTOS HS lifts doors up and over the cabinet. Link to literature: . Delete if not required.

Approved Product: Blum AVENTOS HS up and over lift system.

Cabinet Construction:

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Narrow aluminum frame door.

Lift type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Up and over lift mechanism.

Up and over lift mechanism with SERVO-DRIVE: Electric opening of the door with just a light touch of the front.

Cabinet Height Range:

13-3/4 inches (350 mm) - 31-1/2 inches (800 mm).

Cabinet Width Range:

15 inches (381 mm) - 72 inches (1828 mm).

Dampening System: Self-regulates the closing speed of the door

Integrated.

Mounting:

Screw-on.

** NOTE TO SPECIFIER ** Delete if not required for project.

Accessories:

SERVO-DRIVE: Electric opening of the door with just a light touch of the front.

** NOTE TO SPECIFIER ** With AVENTOS HL, doors lift parallel to the cabinet. Link to literature: . Delete if not required.

Approved Product: Blum AVENTOS HL lift up lift system.

Cabinet Construction:

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Narrow aluminum frame door.

Lift Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Lift up lift mechanism.

Lift up lift mechanism with SERVO-DRIVE: Electric opening of the door with just a light touch of the front.

Cabinet Height Range:

** NOTE TO SPECIFIER ** Delete items below not required for project.

11-13/16 inches (300 mm) - 22-13/16 inches (580 mm).

Appliance garage application: 17-11/16 inches (450 mm) - 22-13/16 inches (580 mm)

Cabinet Width Range:

15 inches (381 mm) - 72 inches (1828 mm).

Dampening System: Self-regulates the closing speed of the door

Integrated.

Mounting:

Screw-on.

** NOTE TO SPECIFIER ** Delete if not required for project.

Accessories:

SERVO-DRIVE: Electric opening of the door with just a light touch of the front

** NOTE TO SPECIFIER ** AVENTOS HK stay lifts swing up and out of the way. Link to literature: . Delete if not required.

Approved Product: Blum AVENTOS HK stay lift system.

Cabinet Construction:

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Narrow aluminum frame door.

Lift Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Stay lift mechanism.

Stay lift mechanism with SERVO-DRIVE: Electric opening of the door with just a light touch of the front.

** NOTE TO SPECIFIER ** TIP-ON for AVENTOS. AVENTOS doors open with a light touch of the front thanks to the mechanical opening of TIP-ON for AVENTOS. Link to literature: . Delete if not required.

Stay lift mechanism with TIP-ON: Mechanical opening of the door with just a light touch of the front

Cabinet Height Range:

11-13/16 inches (300 mm) - 24 inches (610 mm).

Cabinet Width Range:

15 inches (381 mm) - 72 inches (1828 mm).

Dampening System: Self-regulates the closing speed of the door

Integrated.

Mounting:

Screw-on.

Accessories:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Angle restriction clip: Part No. ________

SERVO-DRIVE: Electric opening of the door with just a light touch of the front

** NOTE TO SPECIFIER ** TIP-ON for AVENTOS. AVENTOS doors open with a light touch of the front thanks to the mechanical opening of TIP-ON for AVENTOS. Link to literature: . Delete if not required.

TIP-ON: Mechanical opening of the door with just a light touch of the front

** NOTE TO SPECIFIER ** AVENTOS HK-S is ideal for smaller cabinetsLink to literature: . Delete if not required.

Approved Product: Blum AVENTOS HK-S stay lift system

Cabinet Construction:

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Narrow aluminum frame door.

Lift Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Stay lift mechanism.

** NOTE TO SPECIFIER ** TIP-ON for AVENTOS. AVENTOS doors open with a light touch of the front thanks to the mechanical opening of TIP-ON for AVENTOS. Link to literature: . Delete if not required.

Stay lift mechanism with TIP-ON: Mechanical opening of the door with just a light touch of the front.

Cabinet Height Range:

7-3/8 inches (186 mm) - 24 inches (610 mm).

Cabinet Width Range:

15 inches (381 mm) - 72 inches (1828 mm).

Dampening System: Self-regulates the closing speed of the door

Integrated.

Mounting:

Screw-on.

Accessories:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Angle restriction clip: Part No. ________

** NOTE TO SPECIFIER ** TIP-ON for AVENTOS. AVENTOS doors open with a light touch of the front thanks to the mechanical opening of TIP-ON for AVENTOS. Link to literature: . Delete if not required.

TIP-ON: Mechanical opening of the door with just a light touch of the front

** NOTE TO SPECIFIER ** AVENTOS HK-XS lifts the door up and out of the way for cabinets with small internal depths. Delete if not required.Link to literature:

Approved Product: Blum AVENTOS HK-XS smaller stay lift system

Cabinet Construction:

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Wood door.

Wide aluminum frame door.

Narrow aluminum frame door.

Lift Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Smaller stay lift mechanism.

** NOTE TO SPECIFIER ** TIP-ON for AVENTOS. AVENTOS doors open with a light touch of the front thanks to the mechanical opening of TIP-ON for AVENTOS. Link to literature: . Delete if not required.

Stay lift mechanism with TIP-ON: Mechanical opening of the door with just a light touch of the front

Cabinet Height Range:

9-3/8 inches (238 mm) - 24 inches (610 mm).

Cabinet Width Range:

9 inches (229 mm) - 72 inches (1828 mm).

Dampening System: Self-regulates the closing speed of the door

Integrated.

Mounting:

Screw-on.

Accessories:

Angle restriction clip: Part No. ________.

** NOTE TO SPECIFIER ** TIP-ON for AVENTOS. AVENTOS doors open with a light touch of the front thanks to the mechanical opening of TIP-ON for AVENTOS. Link to literature: . Delete if not required.

TIP-ON: Mechanical opening of the door with just a light touch of the front

** NOTE TO SPECIFIER ** With or without integrated soft closing, our concealed hinges cover a wide range of applications in face frame or panel cabinets. Delete if not required.

CONCEALED HINGE SYSTEMS

** NOTE TO SPECIFIER ** CLIP top hinges are easy to install, thanks to the CLIP technology. Link to literature: . Delete if not required.

Approved Product: Blum CLIP top Angled Hinges

Cabinet Construction:

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Partial overlay.

Corner merge.

Inset.

Mitered corner.

Hinge Type:

Angled hinge.

Angle:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Plus 15 degree.

Plus 20 degree.

Plus 30 degree II.

Plus 30 degree III.

Plus 45 degree I.

Plus 45 degree II.

Plus 45 degree III.

Minus 15 degree.

Minus 30 degree.

Minus 45 degree.

95 degree: Straight-arm.

95 degree: Half-cranked.

95 degree: Full-cranked.

Suitable for Door Type:

For 19 mm (3/4 inch) door thickness, material consist of wood, melamine, MDF or particleboard.

Closing:

Self-close.

Dampening System: Self-regulates the closing speed of the hinge

Approved Product: BLUMOTION 970A.

Mounting:

INSERTA, tool-free assembly.

Hinges per Door:

2 hinges for doors less than 36 inches (914 mm) high and less than 15 lb (7 kg).

3 hinges for doors less than 64 inches (1626 mm) high and less than 30 lb (14 kg).

4 hinges for doors less than 86 inches (2184 mm) high and less than 45 lb (20 kg).

5 hinges for doors less than 96 inches (2438 mm) high and less than 60 lb (27 kg).

The distance between the top and bottom hinge must be greater than the width of the door.

Cover Caps:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Nickel plated steel.

Nickel plated steel with Blum logo (embossed).

Nickel plated steel with custom logo (minimums apply).

** NOTE TO SPECIFIER ** Soft closing action is built into the hinge cup in these Euro hinges for face frame or panel cabinets. Link to literature: . Delete if not required.

Approved Product: Blum CLIP top BLUMOTION Angled Hinges.

Cabinet Construction:

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay

Partial overlay

Corner merge

Inset

Mitered corner

Hinge Type:

Angled hinge.

Angle:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Plus 15 degree.

Plus 20 degree.

Plus 30 degree II.

Plus 30 degree III.

Plus 45 degree I.

Plus 45 degree II.

Plus 45 degree III.

Minus 15 degree.

Minus 30 degree.

Minus 45 degree.

95 degree: Straight-arm.

95 degree: Half-cranked.

95 degree: Full-cranked.

Suitable for Door Type:

For 19 mm (3/4 inch) door thickness, material consist of wood, melamine, MDF or particleboard.

Closing:

Soft close.

Dampening System: Self-regulates the closing speed of the hinge

Integrated into hinge.

Mounting:

INSERTA, tool-free assembly.

Hinges per Door:

2 hinges for doors less than 36 inches (914 mm) high and less than 15 lb (7 kg).

3 hinges for doors less than 64 inches (1626 mm) high and less than 30 lb (14 kg).

4 hinges for doors less than 86 inches (2184 mm) high and less than 45 lb (20 kg).

5 hinges for doors less than 96 inches (2438 mm) high and less than 60 lb (27 kg).

The distance between the top and bottom hinge must be greater than the width of the door.

Cover Caps:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Nickel plated steel.

Nickel plated steel with Blum logo (embossed).

Nickel plated steel with custom logo (minimums apply).

** NOTE TO SPECIFIER ** Delete if not required.

Approved Product: Blum CLIP top Concealed Hinges.

Cabinet Construction:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Partial overlay.

Twin overlay.

Inset.

Inset and overlay corner.

Flush door.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Partial overlay.

Twin overlay.

Inset.

Inset and overlay corner.

Flush door.

Hinge Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Straight-arm.

Half-cranked.

Full-cranked.

Thick door.

Wide angled.

Zero protrusion.

Inset blind corner.

Overlay blind corner.

Aluminum door.

Diagonal 45 degree.

Mini.

Glass.

Bi-fold.

Angled.

Special applications.

Angle:

** NOTE TO SPECIFIER ** Delete items below not required for project.

107 degree.

110 degree.

110 plus degree.

120 degree.

120 plus degree.

95 degree thick door.

170 degree.

170 degree special applications.

155 degree zero protrusion.

155 degree special applications.

125 degree zero protrusion.

125 degree special applications.

95 degree inset blind corner.

95 degree overlay blind corner.

120 degree aluminum door for BLUMOTION.

120 degree aluminum door.

110 degree diagonal 45 degree.

95 degree mini.

95 degree glass door.

60 degree bi-fold.

95 degree / 110 degree angled.

Suitable for Door Type:

For door thickness range 16 mm to 30 mm, material consist of wood, melamine, MDF or particleboard.

Closing:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Self-close.

Free swing.

Dampening System: Self-regulates the closing speed of the hinge.

** NOTE TO SPECIFIER ** Delete items below not required for project.

Approved Product: BLUMOTION 973A.

Approved Product: BLUMOTION 971A.

Approved Product: BLUMOTION 970A.

Mounting:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Screw-on.

Press-in.

INSERTA, tool-free assembly.

EXPANDO.

Hinges per Door:

2 hinges for doors less than 36 inches (914 mm) high and less than 15 lb (7 kg).

3 hinges for doors less than 64 inches (1626 mm) high and less than 30 lb (14 kg).

4 hinges for doors less than 86 inches (2184 mm) high and less than 45 lb (20 kg).

5 hinges for doors less than 96 inches (2438 mm) high and less than 60 lb (27 kg).

The distance between the top and bottom hinge must be greater than the width of the door.

Cover Caps:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Nylon: Black.

Nylon: Black with custom logo (minimums apply).

Nylon: White.

Nylon: White with custom logo (minimums apply).

Nickel plated steel.

Nickel plated steel with Blum logo (embossed).

Nickel plated steel with custom logo (minimums apply).

** NOTE TO SPECIFIER ** Delete if not required.

Approved Product: Blum CLIP top BLUMOTION Hinges. Concealed hinges with integrated soft close.

Cabinet Construction:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Partial overlay.

Twin overlay.

Inset.

Inset and overlay corner.

Flush door.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Partial overlay.

Twin overlay.

Inset.

Inset and overlay corner.

Flush door.

Hinge Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Straight-arm.

Half-cranked.

Full-cranked.

Thick door.

Diagonal 45 degree.

Inset blind corner.

Overlay blind corner.

Narrow aluminum door.

Angled

Angle:

** NOTE TO SPECIFIER ** Delete items below not required for project.

110 degree.

110 plus degree.

95 degree thick door.

110 degree diagonal 45 degree.

95 degree inset blind corner.

95 degree overlay blind corner.

95 degree narrow aluminum door.

Suitable for Door Type:

For door thickness range 16 mm to 30 mm, material consist of wood, melamine, MDF or particleboard.

Closing:

Soft close.

Dampening System: Self-regulates the closing speed of the hinge

Integrated into hinge.

Mounting:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Screw-on.

Press-in.

INSERTA, tool-free assembly.

EXPANDO.

Hinges per Door:

2 hinges for doors less than 36 inches (914 mm) high and less than 15 lb (7 kg).

3 hinges for doors less than 64 inches (1626 mm) high and less than 30 lb (14 kg).

4 hinges for doors less than 86 inches (2184 mm) high and less than 45 lb (20 kg).

5 hinges for doors less than 96 inches (2438 mm) high and less than 60 lb (27 kg).

The distance between the top and bottom hinge must be greater than the width of the door

Cover Caps:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Nylon: Black.

Nylon: Black with custom logo (minimums apply).

Nylon: White.

Nylon: White with custom logo (minimums apply).

Nickel plated steel.

Nickel plated steel with Blum logo (embossed).

Nickel plated steel with custom logo (minimums apply).

** NOTE TO SPECIFIER ** Delete if not required.

Approved Product: Blum CLIP top Glass Door Hinges.

Cabinet Construction:

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Partial overlay.

Inset.

Hinge Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Straight-arm.

Half-cranked.

Full-cranked.

Angle:

** NOTE TO SPECIFIER ** Delete items below not required for project.

95 degree: Straight-arm.

95 degree: Half-cranked.

95 degree: Full-cranked.

Suitable for Door Type:

For glass thickness of 4.5 mm to 7 mm.

Closing:

Self-close.

Dampening System: Self-regulates the closing speed of the hinge

** NOTE TO SPECIFIER ** Delete items below not required for project.

Approved Product: BLUMOTION 971A.

Approved Product: BLUMOTION 970A.

Mounting: Screw-on.

Hinges per Door:

2 hinges for doors less than 36 inches (914 mm) high and less than 15 lb (7 kg).

3 hinges for doors less than 64 inches (1626 mm) high and less than 30 lb (14 kg).

4 hinges for doors less than 86 inches (2184 mm) high and less than 45 lb (20 kg).

5 hinges for doors less than 96 inches (2438 mm) high and less than 60 lb (27 kg).

The distance between the top and bottom hinge must be greater than the width of the door.

Cover Caps:

** NOTE TO SPECIFIER ** Delete items below not required for project.

D-shaped in polished chrome for door.

Round in polished chrome for door.

Round in black for door.

Nickel plated steel.

Nickel plated steel with Blum logo (embossed).

Nickel plated steel with custom logo (minimums apply).

** NOTE TO SPECIFIER ** Delete if not required.

Approved Product: Blum CLIP top 120 Degree Aluminum Door Hinges.

Cabinet Construction:

Frameless for the following application:

Full overlay

Hinge Type:

Straight-arm.

Angle:

95 degree: Straight-arm.

Suitable for Door Type:

For aluminum door thickness 18 mm to 22 mm

Closing:

Self-close.

Dampening System: Self-regulates the closing speed of the hinge.

Approved Product: BLUMOTION 973A.

Mounting:

Screw-on.

Hinges per Door:

2 hinges for doors less than 36 inches (914 mm) high and less than 15 lb (7 kg).

3 hinges for doors less than 64 inches (1626 mm) high and less than 30 lb (14 kg).

4 hinges for doors less than 86 inches (2184 mm) high and less than 45 lb (20 kg).

5 hinges for doors less than 96 inches (2438 mm) high and less than 60 lb (27 kg).

The distance between the top and bottom hinge must be greater than the width of the door.

Cover Caps:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Nylon: Black.

Nylon: Black with custom logo (minimums apply).

Nylon: White.

Nylon: White with custom logo (minimums apply).

Nickel plated steel.

Nickel plated steel with Blum logo (embossed).

Nickel plated steel with custom logo (minimums apply).

** NOTE TO SPECIFIER ** Delete if not required.

Approved Product: Blum CLIP Hinges

Cabinet Construction:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Partial overlay.

Twin overlay.

Inset

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Partial overlay.

Twin overlay.

Inset.

Hinge Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Straight-arm.

Half-cranked.

Full-cranked.

Angle:

** NOTE TO SPECIFIER ** Delete items below not required for project.

107 degree.

100 degree.

Suitable for Door Type:

For door thickness 16 mm to 24 mm, material consist of wood, melamine, MDF or particleboard.

Closing:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Self-close.

Free swing.

Dampening System: Self-regulates the closing speed of the hinge

** NOTE TO SPECIFIER ** Delete items below not required for project.

Approved Product: BLUMOTION 973A.

Approved Product: BLUMOTION 971A.

Approved Product: BLUMOTION 970A.

Mounting:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Screw-on.

Press-in.

INSERTA, tool-free assembly.

Hinges per Door:

2 hinges for doors less than 36 inches (914 mm) high and less than 15 lb (7 kg).

3 hinges for doors less than 64 inches (1626 mm) high and less than 30 lb (14 kg).

4 hinges for doors less than 86 inches (2184 mm) high and less than 45 lb (20 kg).

5 hinges for doors less than 96 inches (2438 mm) high and less than 60 lb (27 kg).

The distance between the top and bottom hinge must be greater than the width of the door.

Cover Caps:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Nylon: Black.

Nylon: Black with custom logo (minimums apply).

Nylon: White.

Nylon: White with custom logo (minimums apply).

Nickel plated steel.

Nickel plated steel with Blum logo (embossed).

Nickel plated steel with custom logo (minimums apply).

** NOTE TO SPECIFIER ** COMPACT hinges are the ideal solution for face frame cabinets. Link to literature: if not required.

Approved Product: Blum COMPACT Concealed Hinges.

Cabinet Construction:

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

1/4 inch (6.35 mm) overlay.

3/8 inch (9.5 mm) overlay.

1/2 inch (12.7 mm) overlay.

5/8 inch (15.9) overlay.

3/4 inch (19 mm) overlay.

1 inch (25.4 mm) overlay.

1-1/8 inches (27.6 mm) overlay.

1-1/4 inches (31.8 mm) overlay.

1-5/16 inches (33 mm) overlay.

1-3/8 inches (35 mm) overlay.

1-1/2 inches (38 mm) overlay.

1-9/16 inches (39.7 mm) overlay.

1-5/8 inches (41.2 mm) overlay.

1-3/8 inches (41.2 mm) plus overlay face mount.

Hinge Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

One piece.

Two piece.

Wraparound.

Edge mount.

Face mount.

Angle:

** NOTE TO SPECIFIER ** Delete items below not required for project.

105 degree.

107 degree.

110 degree.

Suitable for Door Type:

For door thickness 16 mm to 19 mm, material consist of wood, melamine, MDF or particleboard.

Closing:

Self-close.

Dampening System: Self-regulates the closing speed of the hinge

Approved Product: BLUMOTION 971A.

Mounting:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Screw-on.

Press-in.

Hinges per Door:

2 hinges for doors less than 36 inches (914 mm) high and less than 15 lb (7 kg).

3 hinges for doors less than 64 inches (1626 mm) high and less than 30 lb (14 kg).

4 hinges for doors less than 86 inches (2184 mm) high and less than 45 lb (20 kg).

5 hinges for doors less than 96 inches (2438 mm) high and less than 60 lb (27 kg).

The distance between the top and bottom hinge must be greater than the width of the door.

Cover Caps:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Nickel plated steel.

Nickel plated steel with Blum logo (embossed).

Nickel plated steel with custom logo (minimums apply).

** NOTE TO SPECIFIER ** Face frame hinges with soft closing action built into the hinge cupLink to literature: . Delete if not required.

Approved Product: Blum COMPACT BLUMOTION Concealed Hinges.

Cabinet Construction:

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

5/16 inch (7.9 mm) overlay.

3/8 inch (9.5 mm) overlay.

1/2 inch (12.7 mm) overlay.

5/8 inch (15.9) overlay.

3/4 inch (19 mm) overlay.

1 inch (25.4 mm) overlay.

1-1/4 inches (31.8 mm) overlay.

1-5/16 inches (33 mm) overlay.

1-3/8 inches (35 mm) overlay.

1-1/2 inches (38 mm) overlay.

1-9/16 inches (39.7 mm) overlay.

1-3/8 inches (41.2 mm) plus overlay face mount.

Hinge Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

One piece.

Wraparound.

Edge mount.

Face mount.

Angle:

** NOTE TO SPECIFIER ** Delete items below not required for project.

105 degree.

107 degree.

110 degree.

Suitable for Door Type:

For door thickness 16 mm to 19 mm, material consist of wood, melamine, MDF or particleboard.

Closing:

Soft close.

Dampening System: Self-regulates the closing speed of the hinge

Integrated into hinge.

Mounting:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Screw-on.

Press-in.

Hinges per Door:

2 hinges for doors less than 36 inches (914 mm) high and less than 15 lb (7 kg).

3 hinges for doors less than 64 inches (1626 mm) high and less than 30 lb (14 kg).

4 hinges for doors less than 86 inches (2184 mm) high and less than 45 lb (20 kg).

5 hinges for doors less than 96 inches (2438 mm) high and less than 60 lb (27 kg).

The distance between the top and bottom hinge must be greater than the width of the door.

Cover Caps:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Nickel plated steel.

Nickel plated steel with Blum logo (embossed).

Nickel plated steel with custom logo (minimums apply).

** NOTE TO SPECIFIER ** Delete if not required for project.

DRAWER RUNNER SYSTEMS

Approved Product: Blum TANDEM Concealed Runners for Wood Drawers.

Cabinet Construction:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Inset.

Narrow.

Interior roll-out/shelf/tray.

Bottom mount.

SPACE CORNER - 90 degree corner cabinet with drawers.

Deep.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Inset.

Narrow.

Interior roll-out/shelf/tray.

Bottom mount.

SPACE CORNER - 90 degree corner cabinet with drawers.

Deep.

Runner Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full extension.

Full extension with BLUMOTION.

Heavy duty full extension with BLUMOTION.

Bottom mount heavy duty with BLUMOTION.

Drawer Length:

** NOTE TO SPECIFIER ** Delete items below not required for project.

9 inches (229 mm).

12 inches (305 mm).

15 inches (381 mm).

18 inches (457 mm).

21 inches (533 mm).

24 inches (610 mm).

27 inches (686 mm).

30 inches (762 mm).

Drawer Side Thickness:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Up to 5/8 inch (16 mm).

Up to 3/4 inch (19 mm).

Drawer Weight Capacity:

** NOTE TO SPECIFIER ** Delete items below not required for project.

75 pounds dynamic/100 pounds static.

90 pounds dynamic/100 pounds static.

135 pounds dynamic/150 pounds static.

Locking Device: One right and one left required per drawer.

** NOTE TO SPECIFIER ** Delete items below not required for project.

With side-to-side adjustment:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Standard.

Vertical mount.

Depth adjustable.

Without side-to-side adjustment:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Standard.

Vertical mount.

Narrow drawer.

Materials/Finish:

Runners: Zinc-coated steel with nylon rollers

Rear brackets/sockets: Zinc-coated steel or nylon

Locking devices: Stamped steel, zinc die-cast or nylon

End caps: Nylon

Bottom/Back/Side spacers: Nylon

Closing:

Self-close.

Dampening System: Self-regulates the closing speed of the drawer.

Integrated into 563 & 569 drawer runners.

Mounting:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Screw-on: side mount or block out.

Screw-on: frame mount with rear bracket.

Screw-on: bottom mount.

Accessories:

** NOTE TO SPECIFIER ** Delete items below not required for project.

ORGA-LINE:

Flatware set: Part No. ________

Flatware tray: Part No. ________

Utensil set: Part No. ________

4.) Plate holder: Part No. ________

Spice trays: Part No.

Knife holder: Part No. ________

Deep drawer cross divider: Part No. ________

SERVO-DRIVE: Electric opening of the drawer with just a light touch of the front.

TIP-ON: Mechanical opening of the drawer with just a light touch of the front.

Approved Product: Blum STANDARD Drawer Runners for Wood Drawers.

Cabinet Construction:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Bottom mount.

Deep.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full overlay.

Bottom mount.

Deep.

Runner Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Partial extension.

Full extension.

Drawer Length:

** NOTE TO SPECIFIER ** Delete items below not required for project.

10 inches (250 mm).

12 inches (300 mm).

14 inches (350 mm).

16 inches (400 mm).

18 inches (450 mm).

20 inches (500 mm).

22 inches (550 mm).

24 inches (600 mm).

26 inches (650 mm).

28 inches (700 mm).

30 inches (753 mm).

32 inches (803 mm).

Drawer Weight Capacity:

75 pounds dynamic/100 pounds static.

Materials/Finish:

Cream epoxy coated steel.

Closing:

Self-close.

Mounting:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Screw-on: side mount or block out.

Screw-on: frame mount with rear bracket.

Screw-on: bottom mount.

** NOTE TO SPECIFIER ** Delete if not required for project.

BOX SYSTEMS

** NOTE TO SPECIFIER ** Our deluxe stainless steel drawer system with integrated soft close that opens the door to sleek design and organization options. Link to literature: . Delete if not required.

Approved Product: Blum LEGRABOX Premium Metal Drawer System

Cabinet Construction:

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Standard drawer.

Pantry.

Sink.

Deep drawer.

Runner Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full extension with BLUMOTION.

Heavy duty full extension with BLUMOTION.

Drawer Length:

** NOTE TO SPECIFIER ** Delete items below not required for project.

11 inches (270 mm).

14 inches (350 mm).

16 inches (400 mm).

18 inches (450 mm).

20 inches (500 mm).

22 inches (550 mm).

24 inches (600 mm).

Drawer Height:

** NOTE TO SPECIFIER ** Delete items below not required for project.

LEGRABOX M: 3-9/16 inches (90.5 mm).

LEGRABOX C: 7 inches (177 mm).

LEGRABOX F: 9-1/2 inches (241 mm).

Drawer Side Thickness:

1/2 inch (12.8 mm).

Drawer Weight Capacity:

** NOTE TO SPECIFIER ** Delete items below not required for project.

88 pounds dynamic/100 pounds static.

155 pounds dynamic/175 pounds static.

Materials/Finish:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Orion gray.

Brushed stainless steel.

Closing:

Self-close.

Dampening System: Self-regulates the closing speed of the drawer

Integrated.

** NOTE TO SPECIFIER ** Delete items below not required for project.

Accessories:

** NOTE TO SPECIFIER ** AMBIA-LINE for LEGRABOX drawers. AMBIA-LINE is stylish and practical, and storage goods are always organized and easy to find. Link to literature: . Delete if not required.

AMBIA-LINE

Flatware set: Part No. ________

Utensil set: Part No.

Plate holder: Part No. ________

Spice trays: Part No. ________

Knife holder: Part No. ________

Deep drawer frame: Part No. ________

Deep drawer adapter plate: Part No. ________

SERVO-DRIVE: Electric opening of the drawer with just a light touch of the front.

** NOTE TO SPECIFIER ** TIP-ON for drawers. Drawer that open with a light touch - it's possible with TIP-ON for TANDEM, TANDEMBOX and LEGRABOX.Link to TIP-ON for LEGRABOX:

TIP-ON: Mechanical opening of the drawer with just a light touch of the front

Cover Caps - outside:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Orion gray.

Nickel.

Cover Caps - inside:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Orion gray.

Nickel.

Lateral stabilizer set.

** NOTE TO SPECIFIER ** Our TANDEMBOX premium stainless steel drawer system with integrated soft close giving you complete access, endless design possibilities and a variety of organization options. Link to literature: . Delete if not required.

Approved Product: Blum TANDEMBOX Deluxe Metal Drawer System

Cabinet Construction:

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Standard drawer.

Pantry.

File.

Waste/recycle.

Sink.

SPACE CORNER - 90 degree corner cabinet with drawers 7.) Deep drawer.

Runner Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Full extension with BLUMOTION.

Heavy duty full extension with BLUMOTION.

Bottom mount heavy duty with BLUMOTION.

Drawer Length:

** NOTE TO SPECIFIER ** Delete items below not required for project.

11 inches (270 mm).

14 inches (350 mm).

16 inches (400 mm).

18 inches (450 mm).

20 inches (500 mm).

22 inches (550 mm).

24 inches (600 mm).

26 inches (650 mm).

Drawer Height:

** NOTE TO SPECIFIER ** Delete items below not required for project.

TANDEMBOX N: 2-11/16 inches (69 mm).

TANDEMBOX M: 3-5/16 inches (84 mm).

TANDEMBOX B: 5-3/4 inches (146 mm).

TANDEMBOX D: 8-1/8 inches (207 mm).

Drawer Side Thickness:

19/32 inch (15 mm).

Drawer Weight Capacity:

** NOTE TO SPECIFIER ** Delete items below not required for project.

75 pounds dynamic/100 pounds static.

150 pounds dynamic/175 pounds static.

Materials/Finish:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Gray.

Stainless steel.

Silk white (waste/recycle set only).

Closing:

Self-close.

Dampening System: Self-regulates the closing speed of the drawer

Integrated.

Accessories:

** NOTE TO SPECIFIER ** ORGA-LINE for TANDEM drawers. Keeping storage goods organized in a wood drawer is possible with ORGA-LINE for TANDEM. Link to literature: . Delete if not required.

ORGA-LINE:

Flatware set: Part No. ________

Flatware tray: Part No. ________

Utensil set: Part No. ________

Plate holder: Part No. ________

Spice trays: Part No. ________

Knife holder: Part No. ________

Deep drawer cross divider: Part No. ________

Deep drawer cross gallery rail: Part No. ________

SERVO-DRIVE: Electric opening of the drawer with just a light touch of the front

** NOTE TO SPECIFIER ** TIP-ON for drawers. Drawer that open with a light touch - it's possible with TIP-ON for TANDEM, TANDEMBOX and LEGRABOX. Link to TIP-ON for TANDEM:

TIP-ON: Mechanical opening of the drawer with just a light touch of the front

** NOTE TO SPECIFIER ** Our versatile, economical, METABOX steel drawer system with optional soft closing. Link to literature: . Delete if not required.

Approved Product: Blum METABOX Versatile Metal Drawer System

Cabinet Construction:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Face frame for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Standard drawer.

Pantry.

File.

Deep drawer.

Frameless for the following application:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Standard drawer.

Pantry.

File.

Deep drawer.

Runner Type:

** NOTE TO SPECIFIER ** Delete items below not required for project.

320 Series: 3/4 extension.

320 Series: 3/4 extension with BLUMOTION (add-on).

330 Series: Full extension with 3/4 inch (18 mm) over extension.

Drawer Length:

** NOTE TO SPECIFIER ** Delete items below not required for project.

11 inches (270 mm).

14 inches (350 mm).

16 inches (400 mm).

18 inches (450 mm).

20 inches (500 mm).

22 inches (550 mm).

Drawer Height:

** NOTE TO SPECIFIER ** Delete items below not required for project.

METABOX N: 2-1/8 inches (54 mm).

METABOX M: 3-3/8 inches (86 mm).

METABOX K: 4-5/8 inches (118 mm).

METABOX H: 5-7/8 inches (150 mm).

Drawer Side Thickness:

1/16 inch (1.5 mm).

Drawer Weight Capacity:

75 pounds dynamic/100 pounds static.

Materials/Finish:

White epoxy coated.

Closing:

Self-close.

Dampening System: Self-regulates the closing speed of the drawer

320 Series: BLUMOTION add-on Z70.0320.

** NOTE TO SPECIFIER ** Delete items below not required for project.

Accessories:

Organization:

INSERTA (tool free) gallery set: Part No. ________

BOXSIDE (2 required): Part No. ________

Cross gallery rail: Part No. ________

Cross gallery connectors (2 required): Part No. ________

File drawer set: Part No. ________

Cover Caps:

Nylon: White.

SERVO-DRIVE: Electric opening of the drawer with just a light touch of the front

** NOTE TO SPECIFIER ** TIP-ON for drawers. Drawer that open with a light touch - it's possible with TIP-ON for TANDEM, TANDEMBOX and LEGRABOX. Link to TIP-ON for TANDEM:

TIP-ON: Mechanical opening of the drawer with just a light touch of the front.

** NOTE TO SPECIFIER ** Delete if not required for project.

ELECTRONIC OPENING SYSTEMS

** NOTE TO SPECIFIER ** SERVO-DRIVE for drawers. A light touch is all that's needed to open drawers that use our SERVO-DRIVE electrical opening feature. Link to literature: . Delete if not required.

Approved Product: Blum vertical aluminum profile for TANDEM.

** NOTE TO SPECIFIER ** Delete items below not required for project.

Vertical Aluminum Profile:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: Z10T720AB - Profile with cable, length 28-3/8 inches (720 mm).

Part number: Z10T1170A - Profile without cable, length 46 inches (1170 mm).

Top And Bottom Adapter Set:

Part number: Z10D01E0.01 - For use with horizontal stretcher rail.

Back And Bottom Adapter Set:

Part number: Z10D01EA.01 - For use with back stretcher rail.

Drive Unit:

Part number: Z10A3000.02.

Distance Bumper:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: 933.0531 - 5 mm diameter bumper.

Part number: 933.1220 - Screw-on bumper.

Power Supply Set:

Part number: Z10NE02UG10.

Approved Product: Blum inset vertical aluminum profile for TANDEM.

** NOTE TO SPECIFIER ** Delete items below not required for project.

Inset Vertical Aluminum Profile:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: Z10T720AB - Profile with cable, length 28-3/8 inches (720 mm).

Part number: Z10T1170A - Profile without cable, length 46 inches (1170 mm).

Top And Bottom Adapter Set:

Part number: Z10D01E0.01 - For use with horizontal stretcher rail.

Drive Unit:

Part number: Z10A3000.02.

Locking Device With Integrated Distance Bumper (Both Required):

Part number: T51.1901.PS L.

Part number: T51.1901.PS R.

Power Supply Set:

Part number: Z10NE02UG10.

** NOTE TO SPECIFIER ** Delete if not required.

Approved Product: Blum horizontal aluminum profile for TANDEM.

Horizontal Aluminum Profile:

Part number: Z10T1143B - Profile length 45 inches (1143 mm).

Adapter Set:

Part number: Z10D5800.US.

Drive Unit:

Part number: Z10A3000.02.

Distance Bumper:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: 933.0531 - 5 mm diameter bumper.

Part number: 933.1220 - Screw-on bumper.

Power Supply Set:

Part number: Z10NE02UG10.

Approved Product: Blum inset horizontal aluminum profile for TANDEM.

Inset Horizontal Aluminum Profile:

Part number: Z10T1143B - Profile length 45 inches (1143 mm).

Adapter Set:

Part number: Z10D5800.US.

Drive Unit:

Part number: Z10A3000.02.

Locking Device With Integrated Distance Bumper (Both Required):

Part number: T51.1901.PS L.

Part number: T51.1901.PS R.

Power Supply Set:

Part number: Z10NE02UG10.

Approved Product: Blum top bracket for TANDEM.

Top Bracket With Adapter:

Part number: Z10D6252.

Drive Unit:

Part number: Z10A3000.02.

Distance Bumper:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: 933.0531 - 5 mm diameter bumper.

Part number: 933.1220 - Screw-on bumper.

Power Supply Set:

Part number: Z10NE02UG10.

Approved Product: Blum inset top bracket for TANDEM.

Top Bracket With Adapter:

Part number: Z10D6252.

Drive Unit:

Part number: Z10A3000.02.

Locking Device With Integrated Distance Bumper (Both Required):

Part number: T51.1901.PS L.

Part number: T51.1901.PS R.

Power Supply Set:

Part number: Z10NE02UG10.

Approved Product: Blum bottom bracket for TANDEM.

Bottom Bracket:

Part number: Z10D7201.01.

Drive Unit:

Part number: Z10A3000.02.

Distance Bumper:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: 933.0531 - 5 mm diameter bumper.

Part number: 933.1220 - Screw-on bumper.

Power Supply Set:

Part number: Z10NE02UG10.

Approved Product: Blum inset bottom bracket for TANDEM

Bottom Bracket:

Part number: Z10D7201.01.

Drive Unit:

Part number: Z10A3000.02.

Locking Device With Integrated Distance Bumper (Both Required):

Part number: T51.1901.PS L.

Part number: T51.1901.PS R.

Power Supply Set:

Part number: Z10NE02UG10

** NOTE TO SPECIFIER ** Waste/recycle sets. Premium solutions for TANDEM and TANDEMBOXwaste/recycle cabinets. Link to literature: Delete if not required.

Approved Product: Blum Waste/recycle set.

Part number: Z10NA20UGUS.

Approved Product: Blum vertical aluminum profile for TANDEMBOX

Vertical Aluminum Profile:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: Z10T720AB - Profile with cable, length 28-3/8 inches (720 mm).

Part number: Z10T1170A - Profile without cable, length 46 inches (1170 mm)

Top And Bottom Adapter Set:.

Part number: Z10D01E0.01 - For use with horizontal stretcher rail.

Back And Bottom Adapter Set:

Part number: Z10D01EA.01 - For use with back stretcher rail.

Drive Unit:

Part number: Z10A3000.02.

Distance Bumper:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: 933.0531 - 5 mm diameter bumper.

Part number: 933.1220 - Screw-on bumper.

Power Supply Set:

Part number: Z10NE02UG10.

Approved Product: Blum horizontal aluminum profile for TANDEMBOX.

Horizontal Aluminum Profile:

Part number: Z10T1143B - Profile length 45 inches (1143 mm).

Adapter Set:

Part number: Z10D5210.US.

Drive Unit:

Part number: Z10A3000.02.

Distance Bumper:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: 933.0531 - 5 mm diameter bumper.

Part number: 933.1220 - Screw-on bumper.

Power Supply Set:

Part number: Z10NE02UG10.

Approved Product: Blum top bracket for TANDEMBOX.

Top Bracket With Adapter:

Part number: Z10D6252.

Drive Unit:

Part number: Z10A3000.02.

Distance Bumper:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: 933.0531 - 5 mm diameter bumper.

Part number: 933.1220 - Screw-on bumper.

Power Supply Set:

Part number: Z10NE02UG10.

Approved Product: Blum bottom bracket for TANDEMBOX.

Bottom Bracket:

Part number: Z10D7201.01.

Drive Unit:

Part number: Z10A3000.02.

Distance Bumper:

** NOTE TO SPECIFIER ** Delete items below not required for project.

Part number: 933.0531 - 5 mm diameter bumper.

Part number: 933.1220 - Screw-on bumper.

Power Supply Set:

Part number: Z10NE02UG10.

EXECUTION

EXAMINATION

Do not begin installation until substrates have been properly prepared.

If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

PREPARATION

Clean surfaces thoroughly prior to installation.

Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

INSTALLATION

Install in accordance with manufacturer's instructions.

PROTECTION

Protect installed products until completion of project.

Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download