ESF#3 Engineering and Public Works



<ENTER JURISDICTION NAME> EMERGENCY OPERATIONS PLANANNEX C — THE ENGINEERING AND PUBLIC WORKS FUNCTIONIntroductionEngineering and Public Works functions at the county, state and federal level are addressed in Emergency Support Function (ESF) #3 – Engineering and Public Works. The Engineering and Public Works Function at the local level address the following areas of concern during emergencies:Damage assessmentProvision of technical adviceDebris removalDemolition and stabilization projectsInspectionsEvaluationsContractingReconnaissanceEmergency repairsTemporary and permanent constructionSituationDisasters cause property damage to homes, public buildings and other facilities. Those structures may require reinforcement, demolition or isolation to ensure safety. Public utilities may be partially or fully inoperable following disasters. Equipment in the immediate disaster area may be damaged or inaccessible. Local government may have to deploy resources from outside the affected area in order to ensure a quick, effective response.AssumptionsThe Engineering and Public Works Function will prioritize local emergency missions by addressing life-safety issues first.There is no single local organization that has oversight over all varieties of public works/engineering assistance that may be required following a disaster.Rapid damage assessment of the disaster area will be necessary to determine the need for additional resources, assistance or local declaration of a disaster.Emergency environmental waivers and legal clearance will be needed for disposal of materials from debris clearance and demolition activities.Local agency requirements will relax. Consumer protection programs will be in place to protect citizens.The Engineering and Public Works Function support services for the disaster area will be provided, to some degree, by contractors from outside the disaster area.Deactivation of the Engineering and Public Works Function can be a long-term process, extending deep into the recovery phase since public works and engineering projects may require many months of activity. The Hamilton County Emergency Management & Homeland Security Agency (EMHSA) or the Cincinnati-Hamilton County Regional Operations Center (ROC), if activated, is available for assistance and support during emergencies. Engineering and Public Works needs can be met by contacting the Hamilton County EMHSA or the ROC. Concepts of OperationsOverviewIn general, the <NAME OF JURISDICTION> Engineer’s Office addresses most engineering concerns; therefore, they serve as the lead for this function. All support agencies may be required to report individually on their emergency missions when activated in the <NAME OF JURISDICTION> Emergency Operations Center or at the site of the disaster.<LIST DESIGNATED OFFICIAL’S TITLE> will notify elements of the Engineering and Public Works Function when public works and engineering capabilities are required for local damage assessment, response and recovery activities during emergencies. Personnel from the Engineering and Public Works Function agencies are prepared to staff and/or support the <NAME OF JURISDICTION> EOC on a twenty-four hour basis and provide personnel and equipment as applicable for emergency response and recovery activities at the disaster site.Additional public works and engineering services and equipment may be contracted for on an emergency basis when required for response and recovery operations.Close coordination is maintained between Engineering and Public Works Function organizations during emergencies to:Prioritize response and recovery missionsShare and update informationEnsure expedient response and recovery actionsAvoid redundant activitiesEnsure a unified effort when working with local, county, state, federal, and private organizationsProvide accurate intelligence to other organizations in the <NAME OF JURISDICTION> EOC and at the site of the emergencyEach Engineering and Public Works Function organization is responsible for providing logistical support to their personnel and for tracking and maintaining equipment and supplies.The Engineering and Public Works Function will coordinate with the Information and Planning Function and the Resource Support Function, when establishing staging areas for public works and engineering personnel, equipment and supplies. This will ensure that the best sites are identified and established and that site locations, contact numbers and capabilities are distributed to personnel needing this information.The Engineering and Public Works Function will coordinate with the Disaster Recovery Function, to support conducting damage assessments. More details about the damage assessment process are located in Annex N - The Disaster Recovery anization and Assignment of ResponsibilityOrganizationAll Engineering and Public Works Function organizations are responsible for the development of internal SOP/SOGs that support the Engineering and Public Works Function and EOC operations.Assignment of ResponsibilityThe <INSERT NAME OF DEPARTMENT WHO IS IDENTIFIED AS THE ORGANIZATION WHO WILL SERVE AS THE ENGINEERING AND PUBLIC WORKS FUNCTION REPRESENTATIVE (NOTE: LIST ORGANIZATION IDENTIFIED IN THE CHART OF THE BASIC PLAN)> is the organization who fill the role of the Engineering and Public Works Function Representative. The Engineering and Public Works Function Representative will:Provide support to Incident Command and/or other EOC Functions.Coordinate with support agencies including those listed below to maintain an accurate overview of engineering and public works activities.Coordinate with the County Emergency Support Function #3, if activated. <NAME OF JURISDICTION> Engineer’s Office will:Provide building inspectors as needed at the site of the emergency.Provide information to <NAME OF JURISDICTION> EOC personnel on industries affected by the disaster.Provide personnel and equipment for the following engineering emergency activities:Inspection of dikes, levies, dams and related structures.Debris removal.Damage assessment.Engineering reconnaissance.Demolition and/or emergency repairs or stabilization of unsafe public structures.Assist with emergency drainage problems.Ensure emergency access to all areas.Restore structural integrity of damaged public property as directed.Contact private organizations as necessary to support the Engineering and Public Works Function assessment, response, and recovery activities.<NAME OF JURISDICTION> Public Works Department will:Provide personnel and equipment for the following public works emergency activities.Debris removal.Damage assessmentAssist with emergency drainage problems.Providing intelligence on local water resources.Delivery of potable water.Provide technical recommendations as requested by the Engineering and Public Works Function organizations during emergencies.Provide equipment and personnel for the Engineering and Public Works Function operations.Local Public Utilities Companies will:Provide emergency coordination information to the <NAME OF JURISDICTION> EOC as needed during a disaster.Support evaluation and repair of public utilities systems following a disaster.The Hamilton County Emergency Management & Homeland Security Agency (EMHSA) / the Cincinnati-Hamilton County Regional Operations Center (ROC): Assist in the coordination of engineer and public works capabilities to fill unmet engineering and public works requirements Coordinate with the Ohio EMA/the State EOC for support, as needed.Resource Requirements for Public Works and Engineering.Engineering and Public Works Function organizations will maintain organizational SOPs, SOGs, MOUs, and Resource Listings that document equipment, supplies and services available to them during emergencies. Additional support needs during an emergency may be requested through the <NAME OF JURISDICTION> EOC to Resource Support Function. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download