Layer 2 Switch Command Line Interface Reference Manual

DES-3226L

Layer 2 Switch

Command Line Interface

Reference Manual

Third Edition (January 2005)

651S3226L045

Printed In China

RECYCLABLE

Trademarks

Copyright ?2005 D-Link Corporation.

Contents subject to change without prior notice.

D-Link is a registered trademark of D-Link Corporation/D-Link

Systems, Inc. All other trademarks belong to their respective

proprietors.

Copyright Statement

No part of this publication may be reproduced in any form or by any

means or used to make any derivative such as translation,

transformation, or adaptation without permission from D-Link

Corporation/D-Link Systems Inc., as stipulated by the United States

Copyright Act of 1976.

i

Table of Contents

Introduction ............................................................................1

Using the Console CLI .............................................................6

Command Syntax.................................................................. 14

Basic Switch Commands....................................................... 19

Switch Port Commands ......................................................... 38

Network Management Commands ......................................... 43

Utility Commands ................................................................. 76

Network Monitoring Commands ............................................ 81

Spanning Tree Commands .................................................. 105

Layer 2 Forwarding Database Commands ........................... 115

Broadcast Storm Control Commands .................................. 119

QOS Commands ................................................................. 122

Port Mirroring Commands................................................... 131

VLAN Commands ................................................................ 138

Link Aggregation Commands............................................... 152

IP Interface Commands ....................................................... 160

ii

IGMP Snooping Commands................................................. 163

Routing Table Commands ................................................... 176

802.1X Commands ............................................................. 180

SSH Commands .................................................................. 208

Port Segmentation Commands ............................................ 219

Command History List ........................................................ 221

Technical Specifications ...................................................... 226

iii

DES-3226L Layer 2 Fast Ethernet Switch User¡¯s Guide

1

I NTRODUCTION

The Switch can be managed through the Switch¡¯s serial port,

Telnet, or the Web-based management agent. The Command

Line Interface (CLI) can be used to configure and manage the

Switch via the serial port or Telnet interfaces.

This manual provides a reference for all of the commands

contained in the CLI. Configuration and management of the

Switch via the Web-based management agent is discussed in

the User¡¯s Guide.

Accessing the Switch via the Serial Port

The Switch¡¯s serial port¡¯s default settings are as follows:

?

9600 baud

?

no parity

?

8 data bits

?

1 stop bit

A computer running a terminal emulation program capable of

emulating a VT-100 terminal and a serial port configured as

above is then connected to the Switch¡¯s serial port via an RS232 DB-9 cable.

1

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download