ARCAT, Inc.
SECTION 01 56 00TEMPORARY JOBSITE PROTECTIONDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2017 - 2019 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** Ram Board?; temporary jobsite protection for walls, floors and counters.This section is based on the products of Ram Board located at:27460 Avenue ScottValencia, CA 91355Phone: 855-848-8678Fax: 818-848-0099Email:kevin.meister@Web: [Click Here] for additional information.Developed in 1999, Ram Board was originally designed to protect floors from the heavy demands of the movie industry. It was used on the sets of feature films such as Armageddon, The Hulk, Spider Man, and Pirates of the Caribbean. Word of Ram Board quickly spread to the construction industry where it was put to the test under the rigorous demands of contractors. Because of Ram Board's Flex-Fiber? technology, it rapidly became contractor's number one choice for floor protection. Ram Board is now sold through over 8,500 local lumber stores, national chains and big box retailers worldwide. Ram Board began in the studios of Hollywood, and now protects construction projects worldwide.
GENERAL
SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
Temporary jobsite protection including the following:
Temporary floor and wall protection.
Temporary stair protection.
Door jamb protection.
Small project floor and wall protection.
Seaming tape for floor protection.
Recyclable, portable jobsite trash containers.
Carpet Protection, adhesive carpet films.
Dust containment, temporary jobsite walls.
Specialty jobsite protection products.
Specialty jobsite adhesive tapes.
RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
Section 03 30 00 - Cast-in-Place Concrete.
Section 12 36 00 - Countertops.
Section 08 11 00 - Metal Doors and Frames.
Section 09 25 23 - Lime Based Plastering.
Section 09 60 00 - Flooring.
Section 09 30 00 - Tiling.
Section 09 70 00 - Wall Finishes.
Section 09 90 00 - Painting and Coating.
REFERENCES
Forest Stewardship Council (FSC).
SUBMITTALS
Submit under provisions of Section 01 30 00 - Administrative Requirements.
Product Data: Manufacturer's data sheets on each product to be used, including:
Preparation instructions and recommendations.
Storage and handling requirements and recommendations.
Installation methods.
QUALITY ASSURANCE
Manufacturer: Minimum 5 years experience manufacturing similar products.
DELIVERY, STORAGE, AND HANDLING
Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.
Handle materials to avoid damage.
** NOTE TO SPECIFIER ** Delete warranty if not required.
PRODUCTS
MANUFACTURERS
Acceptable Manufacturer: Ram Board, which is located at: 10457 163rd Place; Orland Park, IL 60467; Toll Free Tel: 800-754-9685; Tel: 708-226-9810; Fax: 708-226-9817; Email: request info (kmeister@); Web: |
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
Substitutions: Equivalent products as produced by Surface Shields Inc.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements0 - Product Requirements.
** NOTE TO SPECIFIER ** Delete article if not required.
TEMPORARY FLOOR AND WALL PROTECTION
** NOTE TO SPECIFIER ** Delete paragraphs not required.
Ram Board: Model # RB 38-100 Ram Board as manufactured by Ram Board. Heavy-duty temporary and reusable floor and wall protection.
Standards Compliance: FSC certified. Recycled and recyclable materials.
Wall Guard Feature: Fold lines allowing corner, horizontal and vertical wall protection.
Wall guard fold lines at 4 inches (101 mm), 8 inches (203 mm) and 12 inches (305 mm) from edge of board.
Flex-Fiber Technology: Provides unmatched protection from impact while remaining flexible.
Vapor-Cure Technology: Allows protected substrates and finishes to cure while being protected so work may continue.
Spill Guard Technology: Provides added protection against water, paint, mud, and more.
Material Thickness: 46 mils (1.17 mm).
Roll Dimensions (W x L): 38 in x 100 ft (965 mm x 30.5 m). 317 sq ft (29.5 sq m).
Rolls per Pallet: 16.
Ram Board Plus: Model # RB PLUS 38-100 Ram Board Plus as manufactured by Ram Board. Board is pre-taped for faster installs.
Standards Compliance: FSC certified. Recycled and recyclable materials.
Pre-Taped for Faster Installs saving up to 30% on installation of surface protection.
Wall Guard Feature: Fold lines allowing corner, horizontal and vertical wall protection.
Wall guard fold lines at 4 inches (101 mm), 8 inches (203 mm) and 12 inches (305 mm) from edge of board.
Flex-Fiber Technology: Provides unmatched protection from impact while remaining flexible.
Vapor-Cure Technology: Allows protected substrates and finishes to cure while being protected so work may continue.
Spill Guard Technology: Provides added protection against water, paint, mud, and more.
Material Thickness: 46 mils (1.17 mm).
Roll Dimensions (W x L): 38 in x 100 ft (965 mm x 30.5 m). 317 sq ft (29.5 sq m).
Rolls per Pallet: 16.
Ram Board: Model # RB 48-100 Ram Board as manufactured by Ram Board. Heavy-duty temporary and reusable floor and wall protection.
Standards Compliance: FSC certified. Recycled and recyclable materials.
Wall Guard Feature: Fold lines allowing corner, horizontal and vertical wall protection.
Wall guard fold lines at 4 inches (101 mm), 8 inches (203 mm) and 12 inches (305 mm) from edge of board.
Flex-Fiber Technology: Provides unmatched protection from impact while remaining flexible.
Vapor-Cure Technology: Allows protected substrates and finishes to cure while being protected so work may continue. Ram Board Plus tape isn't breathable.
Spill Guard Technology: Provides added protection against water, paint, mud, and more.
Material Thickness: 46 mils (1.17 mm).
Roll Dimensions (W x L): 48 in x 100 ft (1219 mm x 30.5 m). 400 sq ft (37.1 sq m).
Rolls per Pallet: 16.
Ram Board Home Edition: Model # RBHE 36-50 Ram Board Home Edition as manufactured by Ram Board. Re-usable protection for small projects.
Standards Compliance: FSC certified. Recycled and recyclable materials.
Wall Guard Feature: Fold lines allowing corner, horizontal and vertical wall protection.
Flex-Fiber Technology: Provides unmatched protection from impact while remaining flexible.
Vapor-Cure Technology: Allows protected substrates and finishes to cure while being protected so work may continue.
Spill Guard Technology: Provides added protection against water, paint, mud, and more.
Material Thickness: 36 mils (0.91 mm), 15% thinner than Ram Board.
Roll Dimensions (W x L): 36 in x 50 ft (914 mm x 15.24 m). 150 sq ft (13.9 sq m).
Rolls per Box: 9.
Ram Board Painter's Board: Model # 20RB 35-50 Ram Board Painter's Board as manufactured by Ram Board. Floor protection for painting projects.
Standards Compliance: FSC certified. Recycled and recyclable materials.
Flex-Fiber Technology: Provides unmatched protection from impact while remaining flexible.
Vapor-Cure Technology: Allows protected substrates and finishes to cure while being protected so work may continue.
Spill Guard Technology: Provides added protection against water, paint, mud, and more.
Stronger than red rosin papers
Material Thickness: 20 mils (0.91 mm)
Roll Dimensions (W x L): 35 in x 50 ft (89.9 cm x 15.24 m). 145.83 sq ft (13.54 sq m).
Plasti Shield:
Features:
Non-Toxic.
Strong and durable Impact resistant.
Cost effective.
Easy to convert.
100 percent recyclable.
Lightweight.
Reusable.
Hygienic.
Water resistant.
Applications:
Construction.
Remodeling.
Tuck Pointing.
Drywall.
Painting.
Temporary Protection.
Product Specifications
Thickness: 4 mm.
Material: Polypropylene.
Density (grams/sq. meter): 650.
Density (lbs./1000 sq. ft.): 133.
Surface Tension (Dyne Level): 42dyne/cm.
Tear Strength: 1700 gms.
Tensile Strength: 4000 lbs. / sq. inch.
Impact Dart Strength: 320 inches / lb.
Temperature (Ideal): 70 degrees F.
Humidity (Ideal): 50 percent.
Heat Def. Load: 174 degrees at 66 lbs. per sq. inch.
Chemical Name: Polypropylene Homopolymer.
Chemical Family: Copolymer Polypropylene.
Chemical Formula: Proprietary.
Trade Name: Plasti Shield.
Material Use: Surface Protection.
Available Sizes:
PLS4896W4 White 48 inches by 96 inches 4 lbs.
Handling and Storage
No special handling requirements. Keep away from flammable and combustible material. Paper products will not release hazardous chemicals under normal conditions of use.
Installation Instructions:
Flooring Installation: Before laying Plasti Shield, thoroughly sweep area to remove dust and debris. Lay out Plasti Shield to cover the whole area, cut Plasti Shield to length as needed. Seam Plasti Shield together with an appropriate adhesive tape. Replace any Plasti Shield that becomes damaged.
Wall Installation: Before attaching Plasti Shield, test tape against the wall, to ensure no negative interactions. Provide enough Plasti Shield to cover the whole area, and cut Plasti Shield to length. Seam Plasti Shield together with an appropriate adhesive tape i.e Arm Bar Tape by Surface Shields. Replace any Plasti Shield that becomes damaged.
Door Installation: Before attaching Plasti Shield, test tape against the door, to ensure no negative interactions. Provide enough Plasti Shield to cover the door, and cut Plasti Shield to length. Replace any Plasti Shield that becomes damaged.
Window Installation: Before attaching Plasti Shield, test tape against the window to ensure no negative interactions. Provide enough Plasti Shield to cover the whole area and cut Plasti Shield to length. Seam Plasti Shield together with an appropriate adhesive tape i.e Arm Bar Tape by Surface Shields. Replace any Plasti Shield that becomes damaged.
Plasti Shield FR:
Features:
Fire Resistant.
Strong and durable.
Impact resistant.
Cost effective.
Easy to convert.
100 percent recyclable.
Lightweight.
Reusable.
Hygenic.
Water resistant.
Applications:
Construction.
Remodeling.
Tuck Pointing.
Drywall.
Painting.
Temporary Protection.
Product Specifications
Thickness: 4 mm.
Material: Polypropylene.
Density (grams/sq. meter): 650.
Density (lbs./1000 sq. ft.): 133.
Surface Tension (Dyne Level): 42dyne/cm.
Tear Strength: 1700 gms.
Tensile Strength: 4000 lbs. / sq. inch.
Impact Dart Strength: 320 inches / lb.
Temperature (Ideal): 70 degrees F.
Humidity (Ideal): 50 percent.
Heat Def. Load: 174 degrees at 66 lbs. per sq. inch.
Chemical Name: Polypropylene Homopolymer.
Chemical Family: Copolymer Polypropylene.
Chemical Formula: Proprietary.
Trade Name: Plasti Shield Fire Resistant.
Material Use: Surface Protection.
Available Sizes:
PLS4896LBFR Blue 48 inches by 96 inches 4 lbs.
Handling and Storage
No special handling requirements. Keep away from flammable and combustible material. Paper products will not release hazardous chemicals under normal conditions of use.
Installation Instructions:
Flooring Installation: Before laying Plasti Shield, thoroughly sweep area to remove dust and debris. Lay out Plasti Shield to cover the whole area, cut Plasti Shield to length as needed. Seam Plasti Shield together with an appropriate adhesive tape. Replace any Plasti Shield that becomes damaged.
Wall Installation: Before attaching Plasti Shield, test tape against the wall, to ensure no negative interactions. Provide enough Plasti Shield to cover the whole area, and cut Plasti Shield to length. Seam Plasti Shield together with an appropriate adhesive tape i.e Arm Bar Tape by Surface Shields. Replace any Plasti Shield that becomes damaged.
Door Installation: Before attaching Plasti Shield, test tape against the door, to ensure no negative interactions. Provide enough Plasti Shield to cover the door, and cut Plasti Shield to length. Replace any Plasti Shield that becomes damaged.
** NOTE TO SPECIFIER ** Cover Shield provides heavy-duty fire retardant surface protection for a wide variety of industrial, medical, laboratory, nautical, military, and government applications. It rolls out quickly, easily, and is reusable. In many industries, Cover Shield can be used to replace costly alternatives like fire resistant plywood or door skins.
Cover Shield Flame Retardant Protection:
Features:
Premium and standard quality.
Protects: hotels, hospitals, power plants, commercial floors, ships, yachts.
Easy to install and remove.
Cost effective protection for any surface.
Lays flat, is conformable, tear resistant, durable, and dense.
Embossed fire rating NFPA701. No need for paperwork certification for inspectors.
** NOTE TO SPECIFIER ** Delete article if not required.
TEMPORARY STAIR PROTECTION
Stair Protection: Model # RBSA 36 Ram Board Stair Armor as manufactured by Ram Board. Heavy-duty temporary and reusable stair protection.
Reinforced bull nose guard.
Adjustable tread.
Spill Guard Technology: Provides added protection against water, paint, mud, and more.
Non-staining.
Stair Protector Size: 34 inches by 19 inches (864 x 483 mm).
Bundle Size: 6 stair protectors.
Case Size: 36 bundles.
** NOTE TO SPECIFIER ** Delete article if not required.
DOOR JAMB PROTECTION
Door Jamb Protection: Model # RBJP 60 or RBJP 36 Ram Jamb as manufactured by Ram Board. Heavy-duty flexible re-usable door jamb protection.
Materials: Recycled and recyclable materials.
Door Jamb Sizes: Fits 4 in - 9 in (102 mm - 229 mm).
Length: 36 in or 60 in (914 and 1524 mm).
Material Thickness: 65 mils (1.65 mm).
Units per Box: 50.
** NOTE TO SPECIFIER ** Delete article if not required.
SEAMING AND EDGE TAPES FOR FLOOR PROTECTION
** NOTE TO SPECIFIER ** Delete paragraphs not required.
Seaming Tape: Model # RT 3-164 as manufactured by Ram Board. Used to cover Ram Board seams.
Backing: Unique kraft backing tears easily and creates an extremely durable, smooth finish.
Recyclable: 100 percent.
Dimensions (W x L): 3 in x 164 ft (76 mm x 50m).
Rolls per Box: 16.
Vapor-Cure Tape: Model # RB VCT 3-108 as manufactured by Ram Board. Used to cover Ram Board seams which prevents tape lines.
Performance: Allows vapors and moisture to escape from concrete, glue down floors, stained floors, epoxy floors, refinished floors, vinyl composition tile, and most other floor types.
Dimensions (W x L): 3 in x 108 ft (76 mm x 32.9 m).
Rolls per Box: 16.
Edge Tape: Model #RB ET 2.5-180 as manufactured by Ram Board. Used to secure Ram Board Temporary Floor Protection edges to flooring or wall surfaces.
Performance: Easy Release, low tack tape for up to 14 days. Grips tightly to Ram Board while easy release on flooring surfaces up to 14 days.
Dimensions (W x L): 2.5 in x 180 ft (63.5 mm x 55 m)
Rolls per Box: 20.
** NOTE TO SPECIFIER ** Delete article if not required.
RECYCLABLE, PORTABLE JOBSITE TRASH CONTAINERS
Portable Jobsite Trash Containers: Model # RBTB 16-36 Trash Box as manufactured by Ram Board. Portable, reusable jobsite trash container.
Fits Trash Bags: 42 gal - 50 gal (159 to 189 L)
Recycled and Recyclable Materials: 100%.
Unique folds for easy storage.
Quick self-locking assembly, no tape required.
CARPET PROTECTION
** NOTE TO SPECIFIER ** Carpet Shield is a clear, self-adhering protective lm for most types of carpeting and with a special blend of polyethylene, is highly resistant to tears or punctures and won't shift once applied. Ideal during remodeling, painting and moving, it minimizes clean up and damage claims.
Carpet Shield:
Features:
Self-adhering film designed to protect carpeting.
Protects clients' carpeting from damage claims while building, remodeling or painting.
Ideal protection during inclement weather.
Highly resistant to tears and punctures.
Protects all types of carpeting for up to 30 days.
Applications:
Construction.
Moving.
Remodeling.
Model Homes.
Drywall.
Painting.
Temporary Protection.
Product Specifications
Thickness: 2.5 mil nominal.
Film: Low Density Polyethylene.
Adhesive Type: Formulated Acrylic.
Adhesion Level: 17-25 oz./in.
Tensile Strength: 3000 psi.
Temperature (Ideal): 70 degrees F.
Humidity (Ideal): 50 percent.
Elongation MD: 350 percent - 500 percent.
Chemical Name: Acrylic PSA Tapes.
Chemical Family: Acrylic PSA Polyethylene Film.
Chemical Formula: Proprietary.
Trade Name: Carpet Shield.
Material Use: Surface Protection.
Available Sizes
CS2130W Clear 21 inches by 30' 12 lbs. Shelf Display
CS2450W Clear 24 inches by 50 feet 18 lbs. Shelf Display
CS24200L Clear 24 inches by 200 feet 6 lbs. Reverse Wound
CS24500 Clear 24 inches by 500 feet 15 lbs. Reverse Wound
CS241000 Clear 24 inches by 1000 feet 30 lbs. Reverse Wound
CS30200 Clear 30 inches by 200 feet 7.5 lbs. Reverse Wound
CSR30200 Clear 30 inches by 200 feet 7.5 lbs. Regular Wound
CS36200 Clear 36 inches by 200 feet 9 lbs. Reverse Wound
CS36250 Clear 36 inches by 250 feet 11 lbs. Reverse Wound
CS36500 Clear 36 inches by 500 feet 23 lbs. Reverse Wound
CS361000 Clear 36 inches by 1000 feet 45 lbs. Reverse Wound
CS48500 Clear 48 inches by 500 feet 35 lbs. Reverse Wound
Handling and Storage:
Do not apply to hardwood floors or other hard surfaces. Always test Carpet Shield on a small portion of carpet that is in a non-exposed area. 72-hour test required for use over adhesive installations. Temporary protection for up to 30 days. Recommended for synthetic carpeting only. Apply only to dry carpet, do not use under damp conditions.
Application Instructions:
Before applying Carpet Shield, thoroughly clean and vacuum to remove dust and debris. Place on desired surface and unroll. Cut to length with utility knife. When finished, roll up Carpet Shield and discard. If Carpet Shield becomes damaged replace with new Carpet Shield. Replace Carpet Shield every 30 days. Do not apply Carpet Shield to wool based carpet. Follow all installation methods and instructions that come with Carpet Shield.
** NOTE TO SPECIFIER ** Carpet Mask is the durable, self-adhesive carpet protection lm you depend on. It is a clear, self- adhering protective lm for most types of carpeting and with a special blend of polyethylene, is highly resistant to tears or punctures and won't shift once applied. Carpet Mask is available in a variety of sizes in both tinted / clear option.
Carpet Mask:
Features:
Self-adhering film designed to protect carpeting.
Protects clients' carpeting from damage claims while building, remodeling or painting.
Ideal protection during inclement weather.
Highly resistant to tears and punctures.
Protects all types of carpeting for up to 30 days.
Applications:
Construction.
Moving.
Remodeling.
Model Homes.
Drywall.
Painting.
Temporary Protection.
Product Specifications
Thickness: 3 mil nominal
Film: Low Density Polyethylene
Adhesion Type: Solvent Acrylic.
Adhesion Level: 22 oz./in.
Tensile Strength: 2500 psi
Temperature (Ideal): 70 degrees F
Humidity (Ideal): 50 percent
Elongation MD: 300 percent - 500 percent
Chemical Name: Acrylic PSA Tapes
Chemical Family: Acrylic PSA Polyethylene Film
Chemical Formula: Proprietary
Trade Name: Carpet Mask
Material Use: Surface Protection
Available Sizes
CM230 21 inches by 200 feet, Tint, 3 mil
CMS230 Clear 21 inches by 200 feet, Clear, 3 mil
CM232 21 inches by 500 feet, Clear, 3 mil
CM235 21 inches by 1000 feet, Tint, 3 mil
CM335 Clear 24 inches by 200 feet, Clear, 3 m
CM340 Clear 24 inches by 200 feet, Clear, 3 mil
CMR341 24 inches by 200 feet (2in core), Clear, 1.8 mil
CM365 Clear 24 inches by 500 feet, Clear, 3 mi
CM375 Clear 24 inches by 1000 feet, Clear, 3 mil
CM410 Clear 30 inches by 200 feet, Clear, 3 mi
CM420 36 inches by 200 feet, Tint, 3 mil
CM425 Clear 36 inches by 200 feet, Clear, 3 mil
CM435 36 inches by 500 feet, Clear, 3 mil
CM440 Clear 36 inches by 500f feet, Clear, 3 mil
CM515 48 inches by 500 feet, Tint, 3 mil
CM520 Clear 48 inches by 500 feet, Clear, 3 mi
CM530 Clear 48 inches by 1000 feet, Clear, 3 mil
Handling and Storage:
Peel back edge of Carpet Mask and begin to unroll. Press down edge at beginning of area to be covered so Carpet Mask adheres. Continue rolling onto carpet, applying pressure and smoothing down the lm while doing so. Carefully cut end with a sharp edge. When finished, fold edge back against the roll to use at a later time. Removal: roll up Carpet Mask and discard.
Application Instructions:
Do not apply to hardwood floors or other hard surfaces. Always test Carpet Mask on a small portion of carpet that is in a non-exposed area. 72 hour test required for installations. Temporary protection for up to 30 days. Recommended for synthetic carpeting only. Apply only to dry carpet, do not use under damp conditions.
** NOTE TO SPECIFIER ** Carpet Mask? FR is a self-adhering protection fllm and features industry exclusive technology, making it perfect when flame retardant properties are needed on the job. It comes UL certified, passing IMO 5659 standards of safety, parts 2 and Annex 1. It also meets the United States Coast Guard Certificate of Approval.
Carpet Mask FR:
Features:
Specialty self-adhering film designed to protect carpeting when flame retardant properties are needed.
Protects clients' carpeting from damage claims while repairing and inspecting passenger and industrial ships.
Ideal protection during inclement weather.
Highly resistant to tears and punctures.
Protects all types of carpeting for up to 30 days.
Applications:
Marine.
Moving.
Remodeling.
Model Homes.
Drywall.
Painting.
Construction.
Temporary Protection.
Product Specifications
Thickness: 4 mil nominal
Film: Low Density Polyethylene with Fire Retardant
Adhesive Type: Solvent Acrylic.
Adhesion Level: 12 oz./in. nominal
Tensile Strength: 2500 psi
Temperature (Ideal): 70 degrees F
Humidity (Ideal): 50 percent
Elongation MD: 300 percent - 500 percent
Extinguish critical flux 30.9
Sustained burning heat 1.93
Available Sizes
CM625 Clear 36 inches by 300 feet, fire resistant.
CM627 48 inches by 300 feet, fire resistant.
Handling and Storage:
Peel back edge of Carpet Mask and begin to unroll. Press down edge at beginning of area to be covered so Carpet Mask adheres. Continue rolling onto carpet, applying pressure and smoothing down the lm while doing so. Carefully cut end with a sharp edge. When finished, fold edge of the lm back against the roll to use at a later time. Removal: roll up Carpet Mask and discard.
Application Instructions:
Do not apply to hardwood floors or other hard surfaces. Always test Carpet Mask on a small portion of carpet that is in a non-exposed area. 72 hour test required for installations. Temporary protection for up to 30 days. Recommended for synthetic carpeting only. Apply only to dry carpet, do not use under damp conditions.
DUST CONTAINMENT
** NOTE TO SPECIFIER ** Clean Mat is a polyethylene film mat with a tacky surface that prevents dust and dirt from spreading while building or remodeling. Each mat contains 30 sheets, which are tabbed for easy removal of each layer. Clean Mats are commonly placed outside of dust or lead containment areas, or used as a door mat when entering a building.
Tacky Surface Mat - CLEAN MAT:
Features:
Tacky surface mat to remove dust and dirt from footwear.
Mat contains 30 tabbed sheets for easy removal.
Prevents dust and dirt from spreading while building or remodeling.
Do not adhere to carpeted surfaces.
Applications:
Construction.
Remodeling.
Warehouse.
Drywall.
Industrial.
Temporary Protection.
Product Specifications:
Thickness: 2.0 mil nominal.
Film: Low Density Polyethylene.
Adhesive Type: Water Based Acrylic.
Adhesion Level: 14-18 oz./in.
Tensile Strength 150 lbs./in.
Temperature (Ideal) 70 degrees F.
Humidity (Ideal) 50 percent.
Elongation 250-300 percent.
Chemical Family: Polyethylene Film.
Chemical Formula: Proprietary.
Trade Name: Clean Mat.
Material Use: Surface Protection.
Available Sizes
CM1836B4: Blue 18 inches by 36 inches (4 pack) 7 lbs.
CM1836W4: White 18 inches by 36 inches (4 pack) 7 lbs.
CM1845B4: Blue 18 inches by 45 inches (4 pack) 8 lbs.
CM1845W4: White 18 inches by 45 inches (4 pack) 8 lbs.
CM2436B4: Blue 24 inches by 36 inches (4 pack) 9 lbs.
CM2436W4: White 24 inches by 36 inches (4 pack) 9 lbs.
CM2445B4: Blue 24 inches by 45 inches (4 pack) 11 lbs.
CM2445W4: White 24 inches by 45 inches (4 pack) 11 lbs.
CM3636B4: Blue 36 inches by 36 inches (4 pack) 13 lbs.
CM3636W4: White 36 inches by 36 inches (4 pack) 13 lbs.
CM3645B4: Blue 36 inches by 45 inches (4 pack) 16 lbs.
CM3645W4: White 36 inches by 45 inches (4 pack) 16 lbs.
Handling and Storage
Store at room temperature. Do not store in extreme conditions over 95 degrees F or below 40 degrees F.
Installation
Place Clean Mat at the entrance/exit of the jobsite to remove dust and debris before entering the jobsite. Replace tabbed sheet as needed. Do not apply Clean Mat on finished surfaces.
** NOTE TO SPECIFIER ** The ultimate film for duct protection. Duct Cover Shield is a self-adhering protective film for HVAC ducts. It has a very high adhesion, yet it won't leave a residue on metal after removal. This durable film is very resistant to tears and punctures. Duct Cover Shield also helps to meet SMACNA guidelines for providing temporary closures on open ductwork
Self-Adhesive Film - Duct Cover Shield:
Features:
Self-adhering protective film for HVAC ducts.
Very high adhesion for all types of ductwork.
Will not leave a residue on metal after removal.
Highly resistant to tears and punctures.
Applications:
Construction.
HVAC.
Remodeling.
Closures.
Mechanical.
Temporary Protection.
Product Specifications
Thickness: 3.0 mil nominal.
Film: Low Density Polyethylene.
Adhesive Type: Water Based Acrylic.
Adhesion Level: 12.7 oz./in.
Tensile Strength 2800 psi.
Temperature (Ideal) 70 degrees F.
Humidity (Ideal) 50 percent.
Elongation 525 percent.
Chemical Family: Polyethylene Film.
Chemical Formula: Proprietary.
Trade Name: Dust Cover Shield.
Material Use: Temporary closures.
Available Sizes
DCR318200B: Blue 18 inches by 200 inches 5 lbs.
DCR324200B: Blue 24 inches by 200 inches 6 lbs.
DCR24200: Clear 24 inches by 200 inches 6 lbs.
DCR336200B: Blue 36 inches by 200 inches 9 lbs.
DCR36200: Clear 36 inches by 200 inches 9 lbs.
DCR348200B: Blue 48 inches by 200 inches 12 lbs.
Handling and Storage
Store at room temperature. If Duct Cover Shield is stored in extreme conditions over 95 degrees F or below 40 degrees F allow product to return to room temperature prior to use.
Installation
Clean surface of ductwork before applying Duct Shield. Remove upon substantial completion of the jobsite, or when ductwork will be made inaccessible.
** NOTE TO SPECIFIER ** Dust Shield PRO, the state-of-the-art system that makes constructing temporary walls to control dust and heat loss, quick, simple and affordable! The locking head ensures that screening will not slip out and the dent resistant poles, crafted of heavy gauge aluminum, are designed to stand up to the toughest conditions. Once done, the Dust Shield PRO pole compacts for easy storage. Available in 10, 12 and 20 feet.
Extendable Containment Poles - DUST SHIELD PRO:
Features:
Makes constructing temporary walls quick and affordable.
Heavy gauge aluminum prevents dents.
Locking head ensures that poly sheeting will not slip out.
Adjustable poles are available in 10 foot, 12 foot and 20 foot.
360-degree swivel foot for use on floors and angled ceilings.
Custom printed bags available.
Micro adjust feature increases tension against the ceiling.
Applications:
Construction.
Remodeling.
Dust Containment.
Painting.
Temporary Protection.
Product Specifications:
Thickness: n.a.
Bulk Material: Aluminum.
Head/Foot Material: Plastic/Rubber.
Tensile Strength: n.a.
Temperature (Ideal): 70 degrees F.
Humidity (Ideal): 50 percent.
Elongation: n.a.
Chemical Name: n.a.
Chemical Family: n.a.
Chemical Formula: Proprietary.
Trade Name: Dust Shield PRO Poles.
Material Use: Surface Protection/Dust Containment.
Available Sizes
DSPRO2 Red Poles adjust up to 12 feet, 8 lbs.
DSPRO20 Red Poles adjust up to 20 feet, 12 lbs.
Handling and Storage
Store at room temperature.
Installation:
Construct Temporary Dust Containment barriers using Dust Shield Pro Poles and Zip N Close adhesive zippers. Use a jobsite approved poly sheeting. To ensure a tight seal use a Dust Shield Pro Pole every 4-6 feet.
Reusable Tacky Clean Mat - STEP N PEEL:
Features:
Protects floors from dirt, scuffs and heel marks.
Elastic closure.
Lightweight and breathable.
Cost effective protection for any surface.
Available in cloth and PE coated materials.
Applications:
Construction.
Laboratory.
Moving.
Temporary Protection.
Industrial.
Remodeling.
Warehouse.
Product Specifications:
Thickness: 2.0 mil nominal.
Film: Polyethylene.
Adhesive Type: Water-based Acrylic.
Adhesion Level: 14.0 - 18.0 oz./in.
Tensile Strength: 2000-3000 psi.
Temperature (Ideal): 70 degrees F.
Humidity (Ideal): 50 percent.
Elongation: 300-400 percent.
Chemical Name: Polyethylene / Acrylic.
Chemical Family: Polyethylene / Acrylic.
Chemical Formula: Proprietary.
Trade Name: Step N Peel.
Material Use: Surface Protection.
Available Sizes
DG30WM: White Frame 25.5 inches by 31.5 inches 30 Sheets 7 lbs.
DGRCM: Refill 24 inches by 30 inches 30 Sheets 2 lbs.
DG30W: White Frame 25.5 inches by 31.5 inches 30 Sheets 7 lbs.
DGRC: Refill 24 inches by 30 inches 30 Sheets 2 lbs.
DG60W: White Frame 25.5 inches by 31.5 inches 60 Sheets 10 lbs.
DGRC60 Refill 24 inches by 30 inches 60 Sheets 4.5 lbs.
DGC: Custom Print (min 12) 30 Sheets 7 lbs.
Handling and Storage
Store at room temperature. Do not store in extreme conditions over 95 degrees F or below 40 degrees F.
Installation
Place Step N Peel at the entrance/exit of the jobsite to remove dust and debris before entering the jobsite. Replace tabbed sheet as needed.
Self-Adhesive Film - Vent Mask:
Features:
Keeps dust and debris from entering floor or wall registers during construction or work.
Individual perforated sheets for easy application.
Medium tack / residue free.
Applications:
Construction.
Remodeling
Residential.
Drywall.
Painting.
Temporary Protection.
Product Specifications:
Thickness: n.a.
Film: Polyethylene.
Adhesive Type: Water-based Acrylic.
Adhesion Level: n.a.
Tensile Strength: n.a.
Temperature (Ideal): 70 degrees F.
Humidity (Ideal): 50 percent.
Elongation: n.a.
Chemical Name: Polyethylene.
Chemical Family: Polyethylene Film.
Chemical Formula: Proprietary.
Trade Name: Vent Mask.
Material Use: Surface Protection.
Available Sizes:
DG30WM: White Frame 25.5 inches by 31.5 inches 30 Sheets 7 lbs.
VMC12200P8: Clear 12 inches by 200 feet perforations every 8 inches 2 lbs.
VMB08185P4: Blue 8 inches by 185 feet perforations every 4 inches 1.5 lbs.
VMB13185P13: Blue 13 inches by 185 feet perforations every 13 inches 2 lbs.
Handling and Storage:
Store at room temperature. Avoid high humidity environments.
Installation:
Clean surface of Vent before applying Vent Shield. Remove upon substantial completion of the jobsite, when ductwork will be made inaccessible or during testing. Do Not Apply to Wooden vent covers
Self-Adhesive Zippers - Zip N Close Zippers:
Features:
Creates instant access to tarps or plastic enclosures.
Pressure sensitive adhesive backing.
Can be opened from either side.
Use 1 zipper for a flap or 2 for a wider opening.
2 zippers per package.
Applications:
Construction.
Dust Containment.
Remodeling.
Temporary Walls.
Drywall.
Painting.
Abatement.
Product Specifications:
Thickness: n.a.
Adhesion Level: n.a.
Density: n.a.
Tensile Strength: n.a.
Temp Resistance: n.a.
Elongation: n.a
Critical Temperature: n.a.
Cloth Material: Polyester - 300D.
Teeth Material: Polyester.
Teeth Size: 0.74 mm dia.
Head Material: Zinc Alloy.
Adhesive: Styrene Butadiene, Styrene Isoprene.
Trade Name: Zip N Close Zippers.
Material Use: Surface Protection.
Available Sizes:
ZA02 Red 1.5 inches by 7 feet, 10 oz.
ZC02 Blue 2.75 inches by 7 feet, 1 lb.
Handling and Storage:
Ensure good ventilation and exhaustion at the workplace. Keep respiratory protective devices available. Store in a cool location away from fire and heat. No special handling requirements.
Installation:
Construct Temporary Dust Containment barriers using Dust Shield Pro Poles and Zip N Close adhesive zippers. Use a jobsite approved poly sheeting. To ensure a tight seal use a Dust Shield Pro Pole every 4-6 feet.
SPECIALTY PRODUCTS
Window Shield Film:
Features:
Self-adhering protective film for windows and glass.
Protects against overspray, mortar stains and stucco.
No more scraping and cleaning damage to the glass.
Saves time, labor and money.
Applications:
Construction.
Remodeling.
Tuck Pointing.
Drywall.
Painting.
Temporary Protection.
Product Specifications
Thickness: 1.5 mil nominal (short term), 3.1 mil nominal (long term).
Film: Polyethylene w/UV Inhibitor (short term), PVC w/UV Inhibitor (long term).
Adhesive: Type Water-based Acrylic.
Adhesion: Level 8.5 oz./in. (short term), 48 oz./in. (long term).
Tensile Strength: 2-3000 psi (short term), 5100 psi (long term).
Temperature (Ideal): 70 degrees F.
Humidity (Ideal): 50 percent.
Elongation: 300-400 percent (short term), 260 percent (long term).
Chemical Name: Acrylic PSA Tapes.
Chemical Family: Acrylic PSA Polyethylene Film.
Chemical Formula: Proprietary.
Trade Name: Window Shield.
Material Use: Surface Protection.
Available Sizes:
W2B12600 Blue 12 inches by 600 feet (30-45 days, 2pk).
W2B24250 Blue 24 inches by 250 feet (30-45 days).
W2B24600 Blue 24 inches by 600 feet (30-45 days).
W2C24600 Clear 24 inches by 600 feet (30-45 days).
W2C36250 Clear 36 inches by 250 feet (30-45 days).
W3C24600 Clear 24 inches by 600 feet (90-180 days).
W4B24330 Blue 24 inches by 330 feet PVC Long term (6 months -1yr).
W4B36330 Blue 36 inches by 330 feet PVC Long term (6 months -1yr).
Handling and Storage
Store at room temperature and keep out of direct sunlight exposure. If Window Shield is stored in extreme conditions over 95 degrees F or below 40 degrees F allow product to return to room temperature prior to use.
Installation
Clean surface to remove any dust or debris. Place on desired surface and unroll. Cut to length with utility knife. When finished, roll up Window Shield and discard. If Window Shield becomes damaged replace with new Window Shield. Only leave Window Shield on glass per Window Shield model and instructions.
ADHESIVE TAPE
Danger Tape:
Description:
Danger tape is a necessity for construction sites with hazardous areas that require perimeter marking. It's made with a tough and tear resistant polyethylene plastic. Available in English and Spanish.
Product Specifications:
Available Colors: Red.
Tape Size: 3 inches.
Recyclable: Yes.
Reusable: Yes.
Breathable: No.
Adhesive: No.
Liquid Resistant: Yes.
Flame Retardant: No.
Drywall Mesh Tape:
Description:
Drywall mesh tape is a self-adhesive fiberglass tape. Seam drywall joints and mask for stucco application. Patch Pro tape is available in sizes ranging from 2 inches to 36 inches wide.
Product Specifications:
Available Colors: Blue, White, Yellow.
Recyclable: No.
Reusable: No.
Breathable: Yes.
Adhesive: Yes.
Liquid Resistant: No.
Flame Retardant: No.
Painters Grade Blue Tape:
Description:
A versatile, 5 mil tape that's easy to use and conforms to a variety of surfaces. It has a synthetic rubber adhesive that peels off easily.
Product Specifications:
Available Color: Blue.
Recyclable: No.
Reusable: No.
Breathable: No.
Adhesive: Yes.
Liquid Resistant: Yes.
Flame Retardant: No.
PE Tape, Armbar PE Tape, superior hold PE tape
Description:
Developed for superior hold to leading competitors and engineered with exclusive quick release. Armbar pro grade poly tape is ideal for stucco, surface protection and dust containment applications.
Product Specifications:
Available Color: Red.
Tape Size: 2 in.
Recyclable: No.
Reusable: No.
Breathable: No.
Adhesive: Yes.
Liquid Resistant: Yes.
Flame Retardant: No.
Flame Retardant: No.
Ultrastik All Purpose Tape:
Description:
Ultrastik is a double sided, scrim reinforced acrylic adhesive tape. It's ideal for applying base trim, mounting of vinyl, plastic and wooden molding. It's also non-toxic and bonds to most materials.
Product Specifications:
Available Color: Clear.
Recyclable: No.
Reusable: No.
Breathable: No.
Adhesive: Yes.
Liquid Resistant: No.
Flame Retardant: No.
EXECUTION
EXAMINATION
Examine substrates for compliance with requirements for installation. Proceed with installation or protection products only after unsatisfactory conditions have been corrected.
Do not begin protection installation until substrates have been properly prepared.
If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
INSTALLATION
Install protection products in accordance with manufacture's written instructions and approved submittals.
PROTECTION
Protection installed products may be left in place until completion of project or adjacent work.
END OF SECTION ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.