Www.BobsPlans

[Pages:44]

6 Foot Home Bar

Home Bar Plans

Entertain your friends in style with this beautiful oak bar. The top is 6 ft. long and 24" deep. The overall height about 42". The classic design features solid oak armrest molding, solid brass foot rail, a convenient work shelf in the rear, three drawers, and two sliding wine racks. The cabinet is made of ?" oak veneered plywood. The trim and drawer fronts, from ?" solid oak.

The extensive use of pocket holes makes the assembly of this project easy and intuitive. If you have never used pocket holes in your woodworking projects, you'll wonder how you ever got by without them. Pocket hole joints are extremely strong and there is no measuring. You simply drill the pocket holes in one of the work pieces to be joined, (the exact location is not critical), clamp the pieces together and insert the screws. Since the screws remain in the joint, they serve as both a dowel and a permanent clamp.

Copyright ? 2005 by Robert E. Reedy All rights reserved

Home Bar Accessories & Supplies

Click any of these items for links to home bar accessories and supplies you may need.

6 Ft Brass Foot Rail Kit Click here for prices

Brass Railing Click here prices

Arm Rest Molding Click here prices

Drink Dispenser Click here for prices

Bar Tending Tools Click here prices

Drink Mixing Books Click here prices

Table of Contents

Part 1 - Dimensions

Materials List ? Cabinet ................................................................. 1 Front Panel .................................................................................... 2 Side Panel & Vertical Divider ...................................................... 3 Kick Panel, Shelf, & Cleats ........................................................... 4 Front Trim ...................................................................................... 5 Side Trim ....................................................................................... 6 Rear Trim ....................................................................................... 7 Rear Trim Arrangement ................................................................. 8 Materials List ? Brass Foot Rail .................................................... 9 Materials List ? Top & Arm Rest Dimensions ............................ 10 Bar Top .........................................................................................11 Bar Top Rear Trim.........................................................................12 Risers & Soffit ..............................................................................13 Materials List ? Drawers & Wine Racks ......................................14 Drawer Box Sides, Fronts, & Backs..............................................15 Drawer Fronts & Bottoms ............................................................16 Wine Racks ...................................................................................17

Table of Contents

Part 2 - Assembly Instructions

Attach Drawer Slides ................................................................... 18 Attach Wine Rack Slides - Assemble Bottom ........................... 19 Attach Vertical Dividers & Kick Panel ...................................... 20 Attach Side Panels and Work Shelf ..............................................21 Assemble Front & Side Panels .....................................................22 Attach Front and Side Trim ......................................................... 23 Install Upper Horizontal Trim ..................................................... 24 Arrangement of Rear Trim .......................................................... 25 Install Brackets & Measure Side Rail Length ............................. 26 Measure Front Rail Length - Assemble Rails .............................. 27 Assemble Armrest Molding ......................................................... 28 Drill Pocket Holes in the Top ...................................................... 29 Attach Rear Trim to the Top ........................................................ 30 Attach Risers to the Top .............................................................. 31 Attach Top to Molding & End Soffit ........................................... 32 Attach Center Soffit ..................................................................... 33 Assemble Drawers ....................................................................... 34 Assemble Wine Racks ................................................................. 35 Cutout Suggestions (1) .................................................................36 Cutout Suggestions (2) .................................................................37 Cutout Suggestions (3) .................................................................38

Classic Home Bar

Materials You Will Need

Two Sheets One Sheet One Sheet One fourth Sheet

Four One

2 1 1 2 5 2 2 5 3 Large Box About 50 1# Box 1# Box 7

Oak Veneer Plywood -See Cutout Suggestions (1) ?" Oak Veneer Plywood -See Cutout Suggestions (1) ?" Oak Veneer Plywood -See Cutout Suggestions (2) ?" Hardboard -See Cutout Suggestions (2) 5 ?" by 8' by ?" Oak Boards 6 ?" by 8' by ?" Oak Board 2 foot length of Oak Armrest Molding 6 foot length of Oak Arm Rest Molding 6 foot length of Polished Brass Foot Rail (2" diameter) 2 foot length of Polished Brass Foot Rail (2" diameter) Polished Brass Floor Brackets (2" diameter) Polished Brass Elbows (2" diameter) Polished Brass End Caps (2" diameter) Sets of 14" Drawer Slides Drawer Handles 1 ?" Pocket Hole Screws 1" Flathead Wood Screws 1" Finishing Nails 1 ?" Finishing Nails Small Angle Brackets

Click Here Click Here

Note: Be sure all the brass items are 2" diameter and polished brass.

You'll need to purchase one 8' length and one 2' length of arm rest molding. You can cut the 6' length & the second 2' length from the 8' piece.

You'll need two polished brass 90 degree elbows (2" diameter).

You'll need five polished brass floor brackets (2" diameter).

Click Here Click Here

You'll need one 8' length and one 2' length of polished brass foot rail (2" diameter). You can cut the 6' length & the second 2' length from the 8' piece.

You'll need two polished brass end caps (2" diameter).

Click Here

Cabinet Materials List

Page 1

Please Note! The dimensions given are based on using 3/4" thick plywood. However, much of the plywood on the market today is actually a metric size and is slightly less than 3/4" thick. This will not affect most of the dimensions, however, you will need to adjust the dimensions of the rear trim accordingly if your plywood is less than 3/4" thick.

Qty

Size

2 6 1/2" X 41 1/8" 1 41" X 41 1/8" 2 14" X 41 1/8"

2 14" X 23 1/2" 2 14" X 52 1/2" 1 5" X 52 1/2" 1 16" X 14" 15 14" X 2" 2 19" X 2"

2 2" X 55 1/2" 2 2 ?" X 36" 4 1 1/2" X 36" 2 3/4" X 36" 4 2" X 16 1/4" 2 1" X 26"

2 1" X 18" 1 2" X 51" 1 3 1/4" X 51" 2 1 1/2" X 21" 2 1 1/2" X 40" 2 1 1/2" X 14 1/2"

Material

3/4" Oak Plywood 3/4" Oak Plywood 3/4" Oak Plywood 3/4" Oak Plywood 3/4" Oak Plywood 3/4" Oak Plywood 3/4" Oak Plywood 3/4" Oak Plywood 3/4" Oak Plywood 3/4" Solid Oak 3/4" Solid Oak 3/4" Solid Oak 3/4" Solid Oak 3/4" Solid Oak 3/4" Solid Oak 3/4" Solid Oak 3/4" Solid Oak 3/4" Solid Oak 3/4" Solid Oak 3/4" Solid Oak 3/4" Solid Oak

Item Name

Left and Right Front Panels Center Front Panel Cabinet Sides Vertical Dividers Top Work Shelf and Bottom Kick Panel Small Shelf Cleats Front Cleats Top and Bottom Trim (Front) Fluted Trim (Front) Corner Trim Side Corner Trim (Front) Top and Bottom Trim (Side) Decorative Frame (Top and Bottom) Decorative Frame (Sides) Bottom Horizontal Trim (Back) Top Horizontal Trim (Back) Vertical Divider Trim (Back) Vertical Corner Trim (Back) Drawer Divider Trim (Back)

Copyright ? 2005 by Robert E Reedy, Vandalia, Ohio

Front Panel Dimensions

Page 2

Left Front Panel Right Front Panel

6 1/2" 6" 10"

10"

41"

Center Front Panel

10"

6 1/2" 41 1/8"

Drill pocket holes on the front sides of the center panel as shown above. These pocket holes are used to attach the three front panels together. The pocket holes will be covered with the trim later.

Copyright C 2005 by Robert E. Reedy, Vandalia, Ohio

Side Panel & Vertical Divider

Page 3

41 1/8"

Cabinet Sides

(2 Required)

14"

free picnic table plans

Dividers

23 1/2" (2 Required)

14"

Cut two side panels 14" wide and 41 1/2" high from 3/4 inch oak veneered plywood. Cut two vertical divider panels 14" wide and 23 1/2" high from the same material.

Workshelf/Bottom

14"

(2 Required)

52 1/2"

Cut two pieces of 3/4" oak veneered plywood 52 1/2" wide by 14" deep. One is for the cabinet bottom and the other for the main work shelf.

Copyright C 2005 by Robert E. Reedy, Vandalia, Ohio

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download