Autodesk
Bracket Tutorial Part 2: Analyze the bracket for strengthTip: In a real world scenario, you would need the dimensions, weight, and Center of Gravity of the cab to do a free-body diagram. This exercise does not cover this procedure.Task 1: Simulate the static weight of the cab:Apply a Fixed constraint to the bottom face of the mounting bracket. Apply a Bearing Load to the inner face of the tube in the negative Z direction (assuming Z is up.) The magnitude of the Bearing Load depends on the weight of the cab (assume 4000 lbs). The Bearing Load would be ? of that or 1000 lbs. (This exercise assumes the cab weight is evenly distributed to all four cab mounting brackets).Task 2: Simulate the Loader driving over rough terrain:Add a horizontal force to one of the end faces of the tube. Use a rough guess of 500 lbs. ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- autodesk inventor pdf
- autodesk inventor student download 2019
- autodesk inventor 2019 download
- autodesk inventor tutorials free
- autodesk inventor pdf manual
- autodesk inventor free download
- autodesk inventor software
- autodesk inventor pro 2017
- autodesk inventor professional 2017 free
- autodesk student download
- autodesk inventor 2017 student free
- autodesk inventor pro 2017 download