Www.obd-outlets.com
Techstream V13 for WIN 7 8.1 10 32/64BitHardware: HYPERLINK "; \t "; MINI-VCI J2534 Interface Firmware V1.patible OS:?Windows XP (32/64bit), Vista (32/64bit), 7 (32/64bit), Win 8, Win 8.1, Win 10Latest Version of Java Runtime Environment (JRE) (Included with Software)1.?Begin by installing the Techstream software by clicking on?"Toyota Techstream_10.10.018"?from the main software folder. Type in any User and Company name, then click?NEXT?and?INSTALL. When the installation is complete, click?FINISH. DO NOT LAUNCH THE APPLICATION YET.2.?Now we'll activate it the software. Copy the?"IT3System.ini"?file from the software folder over into "C:\Program Files (x86)\Toyota Diagnostics\Techstream\Env\". When prompted, overwrite the preexisting file with the new one you are copying over.For Techstream to recognize the MINI-VCI Interface under Windows x64, the Registry has to be modified. From the software folder, right click on the?"mvci-x64.reg"?file and click?"merge"?(You will be get a Windows confirmation).3.?Now we need to install the FTDI drivers for the MINI-VCI Interface. From the software folder, run the?"CDM21216_Setup". This Driver Setup will automatically install the correct drivers for your version of Windows.4.?Plug in the USB cable. Windows will detect the interface and install the 2 FTDI drivers that we installed prior. This may take a few minutes to finish. When it's complete, you should receive 2 notifications on the bottom right stating the?USB Serial Port?and?USB Serial Converter?are ready to use.Check:?You can check if it was installed correctly by going to Control Panel> Device Manager and locating:"USB Serial Port (COMX)"?in the?"Ports (COM & LPT)"?root menu AND?"USB Serial Converter"?in the?"Universal Serial Bus controllers"?root menu5.?From the software folder, we will copy the complete folder?"XHorse Electronics"?and paste it to folder?"C:\Program Files (x86)"?When you're done, you'll have a copy of the?"XHorse Electronics"?folder and its contents within?"C:\Program Files (x86)"?directory.6.?Run the?"FirmwareUpdateTool.exe"?from the?"C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS". Click“Device Info”.NOTE:?The firware tool may not work on Windows 8/8.1/10 (not required. only for checking)If you see all of the device information and the status is "Connected", then it's ready to go.IMPORTANT:?The Firmware Update Tool should?NOT?be used for anything, but checking that the device is connected and working properly. The firmware on this device cannot be updated and attempting to will damage it.?Start Techstream from the Desktop shortcut. Chose your region, enter the dealer information (you can enter anything). Go to?Setup | VIM Select?menu and select the?“XHorse - MVCI”. Connect USB Interface cable to your car’s OBDII interface, turn ignition on, then click?“Connect to Vehicle”?in Techstream. It will take a few moments to connect and you can proceed with selecting your vehicle. are no products in this category。After sales support-- HYPERLINK "mailto:799024614@" 799024614@ or 3257504446@ ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- https www municipalonlinepayments
- fashion outlets of las vegas
- fashion outlets of niagara falls
- rosemont outlets chicago
- cannabis outlets near me
- bathroom vanity outlets near me
- starbucks outlets of little rock
- prime outlets niagara falls ny
- designer outlets in las vegas
- 240 volt outlets and plugs
- 220 volt outlets and plugs
- gfci outlets at lowes