Armakleen.com



DATE SUBMITTED:      

CUSTOMER NAME:      

CUSTOMER NUMBER:      

SK REPRESENTATIVE:      

SK REPRESENTATIVE EMAIL:      

SK REPRESENTATIVE CELL #:      

SK BRANCH NAME:      

SK BRANCH PHONE NUMBER:      

SK BRANCH ADDRESS:      

CUSTOMER OBJECTIVE: (check all that apply. Please do not write in “clean the parts” as an objective)

Improve their cleaning performance Reduce their cleaning costs

Automate their cleaning process Eliminate hazardous chemicals/waste

Reduce rework and reject rate Recover scrap parts

Clean mixed metals together Reduce VOCs

Other (describe):      

MAXIMUM ALLOWABLE TIME TO CLEAN PART:

Up to 15 minutes 15 to 30 minutes 30 minutes to 1 hour 1 to 2 hours

2 to 4 hours 4 to 8 hours 8 to 24 hours More than 24 hours

(specify):      

SUBSTRATE: (check all that apply)

Steel/Iron Stainless Steel Aluminum Copper/Brass Glass Plastic

Other (describe):      

SOIL(S) TO BE REMOVED: (check all that apply)

NOTE: If multiple soils are used, please identify the part(s) with the type of soil in the Comments Section.

Shop Dirt Grime Drawing Lube Baked on Carbon

Oil Cutting Fluids Grease Rust/Oxides

Glue/Adhesive Silicone Wax Asphalt

Other Soil (describe):      

Epoxy E-Coat Paint Epoxy Powder Coat Paint Polyester Powder Coat Paint

Acrylic Powder Coat Paint Hybrid Powder Coat Paint Liquid Alkyd Paint

Liquid Polyester Paint Liquid Acrylic Paint Liquid Urethane Paint

Liquid Epoxy Paint Other Paint (describe):      

Flexographic Ink Lithographic Ink Soy-based Ink Gravure Ink

UV Ink Screen Ink Water-based Ink Other Ink (describe):      

SERVICE TYPE: TARGETTED WASHER TYPE: (check all that apply)

EAC Agitating Immersion (81.8 or equivalent)

COMS Spray Under Immersion

ArmaKleen Direct Spray Washer

Other Ultrasonic

Tech Center please choose the best machine for the job

Notes:      

DEGREE OF CLEANLINESS NEEDED:

General Maintenance (90 -95% clean) Machined Parts (90-99% clean) Precision Parts (95-99% clean)

Specialty Cleaning (>99% clean, discuss with ArmaKleen representative before sending)

SIZE AND SHAPE OF PARTS: (Check all that apply)

Small (nuts and bolts) Mid-sized (pistons) Large (engine block) Very Large (truck cab)

NUMBER OF PARTS CLEANED PER DAY:

1-5 5-50 50-200 200 or more

CURRENT PROCESS: (check all that apply)

Manual Manual Soak (like Model 91) Automated Soak

Automated Spray In-Line Spray Ultrasonic

Hand-Held Pressure Wash Steam Clean Vibratory Drum/Barrel

Burn-Off Oven Outside stripping service Scrap parts

Abrasive Blast (describe type):      

CURRENT CLEANING PROCESS STEPS:

| |Step 1 |Step 2 |Step 3 |Step 4 |

|Process Step |      |      |      |      |

|Product Used |      |      |      |      |

|Concentration |      |      |      |      |

|Temperature |      |      |      |      |

|Contact Time |      |      |      |      |

|Machine Type |      |      |      |      |

Example:

| |Step 1 |Step 2 |Step 3 |Step 4 |

|Process Step |Clean |Rinse |RP Rinse | |

|Product Used |ABC Co X50 |Fresh Water |ABC CO RP-3 | |

|Concentration |5% |Overflowing |3% | |

|Temperature |160F |Ambient |140F | |

|Contact Time |20 minutes |1 minute |1 minute | |

|Machine Type |Spray Washer |Dunk tank |Dunk tank | |

APPLICATION & MISCELLANEOUS INFORMATION: (Please describe any additional application information in this section. Include pH, VOC or other environmental restrictions. Include any special process requirements)

     

-----------------------

For Technical Center Use Only

TSR #_______________________

For Technical Center Use Only

TSR #_______________________

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download