SECTION {Insert Section number} - {Insert Section title}
Copyright 2017 by The American Institute of Architects (AIA)
This proprietary Product MasterSpec Section uses modified original MasterSpec text.
Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by, or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec Section by any end user. A qualified design professional should review and edit the document to suit project requirements.
For more information, contact Somfy Systems, 121 Herrod Blvd., Dayton, NJ 08810; Phone: (800) 227-6639 | (609) 395-1300; Fax: (609) 395-1776; Website: ; Email: commercial_solutions_na@.
For information about MasterSpec, contact ARCOM at (800) 424-5080 or visit .
SECTION 107113 - EXTERIOR SUN CONTROL DEVICES
TIPS:
To view non-printing Editor's Notes that provide guidance for editing, click on MasterWorks/Single-File Formatting/Toggle/Editor's Notes.
To read detailed research, technical information about products and materials, and coordination checklists, click on MasterWorks/Supporting Information.
Revise this Section by deleting and inserting text to meet Project-specific requirements.
1. RELATED DOCUMENTS
Retain or delete this article in all Sections of Project Manual.
A.
2. SUMMARY
A. Section Includes:
1. Motorized exterior roller-shade devices.
2. Motorized exterior rolling shutters.
3. Motorized exterior venetian blinds.
4. Sensors and controls.
B. Related Requirements:
Retain subparagraphs below to cross-reference requirements Contractor might expect to find in this Section but are specified in other Sections.
1.
2. [Section 061000 "Rough Carpentry"] [Section 061053 "Miscellaneous Rough Carpentry"] for blocking and support of window shade hardware
3. Section 079200 "Joint Sealants" for sealants for perimeters of installation.
4. Section 260519 "Low-Voltage Electrical Power Conductors and Cables" for power cables.
5. Section 260523 "Control-Voltage Electrical Power Cables" for balanced twisted pair cabling.
6. Section 262726 "Wiring Devices" for accessory electrical wiring devices.
3. DEFINITIONS
Retain terms that remain after this Section has been edited for a project.
A.
B. Autosun™: Solar/battery-powered motor-operator with plug-in option for exterior shade devices, and rolling shutters.
Somfy's "Sunea® CMO" advanced technology ensures that limit settings and programmed controls remain in the motor's memory.
C.
D. DCT: Dry Contact Technology; dry contact (mercury-free) input for basic low-voltage switches via data (communication) cable switching.
E. Exterior Roller-Shade Devices: Exterior, IP-rated, solar, thermal and blackout type shades that roll into a coil and unroll flat.
F. IP Rating: International (or Ingress) Protection Rating is defined by IEC 60529 and classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. The first digit classifies protection against solids (0 to 6) and the second digit (0 to 8) against liquids. The higher the number, the more protected.
G. RA: Rapid Adjustment motor head style. Ability to move between set heights quickly.
H. Radio Technology Tubular Motor: Motor equipped with built-in radio receiver and concealed inside roller tube with Three-wire drive unit inside roller, instantly reversible, and lifetime lubricated.
I. Rolling Shutter Motors: Electrically powered tubular motor integrated into a roll tube, around which the curtain is wound.
Radio Technology is Radio Technology Somfy® (RTS). Radio controls are the most commonly used controls for the exterior roller shades, rolling shutters, and venetian blinds market.
J.
K. SDN 2.0 is "Somfy" Digital Network version 2.0 of bus distribution devices.
Somfy Digital Network™ (SDN) is Somfy's intelligent wired shading network. An SDN system is comprised of bus distribution devices that create a network for user interfaces, motorized applications and sensors to be connected. SDN is scalable, and suitable for both small and large projects, and the same components are used whether an SDN system remains standalone, integrated into third-party automation systems, or with Somfy's "animeo® IP" automated total solar management system.
L.
M. Tubular Motor: Motor equipped with disconnect plug concealed in aluminum tube; and connected to drive shaft through a reduction box.
N. Venetian Blinds: External, retractable vertical blinds made from blades/slats that are held in place by side guides or stainless-steel wire guides. They reduce glare and reduce solar heat gain. The blades can be finely adjusted to provide privacy or filtered light as required and can also be fully retracted to allow maximum light to pass through.
O. WireFree™: A battery-powered motor-operator control with plug-in option for awnings, pergolas, exterior roller shades, rolling shutters, and venetian blinds.
P. WT: Wired Technology; control through standard ac (alternating current) or DC (direct current) via power or polarity switching.
For more ZigBee® information, see products/controls-integration/zigbee and .
Q.
For more Z-Wave® information, see products/controls-integration/z-wave and z-.
R.
4. PREINSTALLATION MEETINGS
Retain "Preinstallation Conference" Paragraph below if Work of this Section is extensive or complex enough to justify a conference. See Section 122509 "Window Treatment Control System" for additional preinstallation conference requirements for motors and controls.
A.
5. ACTION SUBMITTALS
A. Product Data: For each type of product.
1. Include construction details, material descriptions, dimensions of individual components and profiles, and manufacturer recommended installation procedures for exterior sun-control devices.
2. Include rated capacities, operating characteristics, electrical characteristics, and furnished specialties and accessories.
Sustainable design credits can be achieved when using exterior sun-control devices with networked automation controls that can contribute to sustainable design LEED 2009, LEED v4, Green Globes, IgCC or ASHRAE 189.1 credits during design and post construction using:
B.
1. Product Data: For interior or exterior lighting, submit data sheets for exterior [roller shades] [rolling shutters] [venetian blinds,] [and BMS interface and networked automation] controls, including [standalone] [and] [integrated] system operation documentation.
2. Overall [standalone] [and] [integrated] system operation description document, Sequence of Operations.
Simulation documentation is required for LEED credit accreditation.
3.
C. Shop Drawings: [For .]
1. Include plans, elevations, sections, and details showing profiles, angles, and spacing of blades, frames, and supports.
a. Show unit dimensions related to supporting and adjoining structures and construction. Indicate anchorage details and locations.
b. Show locations for blocking, reinforcement, and supplementary structural support.
2. Include details of equipment assemblies. Indicate dimensions, weights, loads, required clearances, method of field assembly, components, and location and size of each field connection.
3. Include diagrams for power, signal, wiring and [standard motors] [radio motors] [and] [networked motors].
4. Structural Calculations: Submit a comprehensive analysis of design loads and thermal movement. Identify moment and shear forces transferred to structure or supports through installation connections.
a. Provide structural calculations, stamped and signed by a qualified professional engineer.
5. Graphics: Show text message, font, character sizes, and other graphic forms; character, word, and line spacing; margin widths; position of copy; and other information related to graphic design.
D. Samples: For each type, provide the following:
1. One complete exterior sun-control device with required components, mounting and associated hardware, and instructions.
2. Fabricated parts indicating fabrication techniques, joinery, fasteners, and accessories.
3. Each different exposed finish color, factory applied on representative aluminum extrusion.
4. Include Samples of graphics[ on fabric] and accessories involving color or finish selection.
E. Product Schedule: For exterior [roller-shade devices,] [rolling shutters,] [venetian blinds,] motor operators, and controllers. Use same designations indicated on Drawings.
6. INFORMATIONAL SUBMITTALS
Coordinate "Qualification Data" Paragraph below with qualification requirements in Section 014000 "Quality Requirements" and as may be supplemented in "Quality Assurance" Article.
A.
Retain "Welding certificates" Paragraph below if retaining "Welding Qualifications" Paragraph in "Quality Assurance" Article and if exterior roller shades, rolling shutters, or venetian blind frame connections are welded.
B.
Retain "Product Certificates" Paragraph below to require submittal of "UL," "FCC," "c TUV us," "CCC," or "CE" product certificates from motor operator and control system manufacturer.
C.
Retain "ZigBee®" option in first subparagraph below for wired motors; delete for "WireFree™."
1.
2. Submit functional description for data points required by BMS system.
3. Submit documentation that line voltage components are UL listed or UL recognized.
4. Complies with FCC.
D. Sample Warranties: For special warranties.
7. CLOSEOUT SUBMITTALS
A. Operation and Maintenance Data: For exterior [roller-shade devices] [rolling shutters] [venetian blinds], motor operators, and control systems to include in operation and maintenance manuals.
B. Warranties: For motor-operator and control system manufacturer's executed warranty documentation.
8. QUALITY ASSURANCE
Somfy offers a variety of wired 120 V ac (alternating current) and 24 V dc (direct current) powered motor operators that are UL recognized or listed. DC powered motors offer high torque capability compared to their weight and size. AC motors have the advantage of not having brushes to maintain, but they are heaver and larger sized and require sophisticated controllers capable of inverting dc to ac at varying frequencies.
A.
1. ISO 9001 certified including in-house engineering and product design activities.
2. Controls manufacturer capable of supplying commissioning services for control systems.
3. Motor manufacturer capable of supplying a full range of wirefree (12-V dc - battery and solar powered) direct voltage dc (24-V dc), main or line-voltage (120-V ac) motor and control products.
B. Fabricator Qualifications: Shop that employs skilled workers who custom fabricate products similar to those required for this Project and whose products have a record of successful in-service performance.
The Industrial Fabrics Association International has a Master Fabric Craftsman certification program. For large or complex projects, consider including certification as a requirement. Verify availability of certified fabricators in Project's locale.
C.
Retain "Welding Qualifications" Paragraph below if shop or field welding is required. If retaining, also retain "Welding certificates" Paragraph in "Informational Submittals" Article.
D.
1. AWS D1.1/D1.1M, "Structural Welding Code - Steel."
2. AWS D1.2/D1.2M, "Structural Welding Code - Aluminum."
E. Certifications: Electric motor operators complying with UL. Provide copy of compliance on request.
F. Mockups: Build mockups of each type of shading assembly specified for evaluation of mounting, appearance, and accessories.
1. Install one complete exterior [roller-shade device] [rolling shutter] [venetian blind] assembly each product type at Project site. Location(s) as specified by Architect.
2. Obtain Architect's approval prior to proceeding with installation of remaining shading assemblies.
3. Approval of mockups does not constitute approval of deviations from the Contract Documents contained in mockups unless Architect specifically approves such deviations in writing.
Retain subparagraph below if the intention is to make an exception to the default requirement in Section 014000 "Quality Requirements" for demolishing and removing mockups.
4.
9. DELIVERY, STORAGE, AND HANDLING
A. Deliver shading assemblies when building is enclosed and construction, where assemblies will be installed, is substantially complete.
B. Deliver products in manufacturer's original, unopened, undamaged containers with identification labels intact.
C. Store products in accordance with manufacturer's written instructions, protecting materials and finishes from damage.
10. WARRANTY
When warranties are required, verify with Owner's counsel that warranties stated in this article are not less than remedies available to Owner under prevailing local laws.
A.
1. Failures include, but are not limited to hardware, metal finishes[, electronic controls, accessories, and motors].
Verify available warranties and warranty periods.
2.
a. Rack Arm Shading Assembly: Two years from date of Substantial Completion.
b. Exterior Venetian Blinds: Two years from date of Substantial Completion.
c. Motors and Controls: Five-year limited warranty.
Somfy motors have a life expectancy of 10 years or more. See Somfy's warranty information at about-us/warranty.
B.
Verify available warranties and warranty periods.
1.
PRODUCTS
Manufacturers and products listed in SpecAgent and MasterWorks Paragraph Builder are neither recommended nor endorsed by the AIA or ARCOM. Before inserting names, verify that manufacturers and products listed there comply with requirements retained or revised in descriptions and are both available and suitable for the intended applications. For definitions of terms and requirements for Contractor's product selection, see Section 016000 "Product Requirements."
1.
A. Manufacturers: For motorized exterior roller-shading systems.
Retain "Manufacturers" Subparagraph and list of manufacturers below to require products from manufacturers listed or a comparable product from other manufacturers.
1.
a. ABC Sun Control, Inc.
b. Accent Industries.
c. Awnings Unlimited/Sunair.
d. Corradi USA.
e. Craft-Bilt Mfg Co.
f. Durasol Systems.
g. Eclipse Awning Systems.
h. Futureguard Building Products.
i. High Velocity.
j. Phantom Mfg.(Intl) Ltd.
k. Progressive Screen Systems.
l. Rainier Industries Ltd.
m. Roll Tec Rolling Systems.
n. Sunesta Products.
o. Sunsetter Products LP.
p. Tri Vantage LLC, NC (Bill to Only).
q. ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- section insert section number insert section title
- instructor contact information lone star college
- the problem
- check capture and check processing appendix
- united nations expert group meeting on building inclusive
- module 1 enn
- optus mobile phones nbn home internet entertainment
- orbit reader 20 plus ht358 plus microsoft
Related searches
- frontline gold package insert pdf
- excel insert list box
- fluzone package insert 2019
- fluzone package insert 2019 20
- fluzone package insert pdf
- fluzone high dose package insert 2019
- title company license number lookup
- insert reference number in word
- pa title number by vin
- pa dmv title number lookup
- texas title number lookup
- title 42 section 1983 lawsuit