Req



Req. 4323

Item #8

Part Number: 205C    Category: 

SEARCH® Silver Nitrate Spray, 8 oz.

Description: Silver Latent Print Spray is an exceptional formula for developing latent prints on porous surfaces. This is a chloride-sensitive, non-aqueous solution that is particularly useful when processing documents or objects printed with water soluble inks or dyes (most inks will not dilute when treated with this solvent). The processing and development procedures are the same as stated for Silver Nitrate Spray. Use the Silver Nitrate Accelerator Lamp for developing prints rapidly

Item #9

Part Number: SCW100    Category: 

THE SEARCH® CYANOWAND™ KIT

Description: The CYANOWAND™ is incredibly simple to use. Simply attach a cyanoacrylate cartridge, ignite and begin fuming. Hold the CYANOWAND™ several inches away from the suspect surface and sweep the wand back and forth. Latent prints develop as they’re fumed. The CYANOWAND™ also offers superb fuming capabilities when used with SIRCHIE®’s fuming chambers. Includes all the necessary materials to process latent fingerprints with cyanoacrylate fuming. Instructions are also included.

Item #10

Part Number: SCW300    Category: 

MEGA-CARTRIDGES

Description: MEGA-CARTRIDGES—are extra-large, disposable, pre-loaded cyanoacrylate cartridges which emit vapor for approximately four minutes.

Item #11

Part Number: CNA2001    Category: 

THE FINDER™ Cyanoacrylate Packets, 20 ea.

Description: THE FINDER™ is a unique gel formulation sandwiched between two layers of aluminum foil. Place the packet horizontally or vertically in a fuming chamber—without dripping any glue.

Item #12

Part Number: CNA3024    Category: 

THE CYANO-SHOT™ LATENT PRINT DEVELOPING SYSTEM

Description: The CYANO-SHOT™ is one of the hottest new products to come along in the world of latent print development in quite some time. Utilizing the developmental properties of cyanoacrylate, this amazing product creates an abundant amount of heat, which decreases fuming time while providing quality ridge detail. The CYANO-SHOT™ is ideal for use with any of SIRCHIE®’s fuming chambers, especially the new FA100 Disposable Fuming Chamber Combination, the FR150 Insta-FumeTent™ and the FR175A and FR175FG Shake-N-Fume™ disposable fuming chambers.

Item #13

Part Number: CNA900    Category: 

CNA900 PORTABLE FUMING CHAMBER KIT

Description: The CNA990 portable fuming chamber is a cyanoacrylate development chamber designed with field use in mind. Constructed of shatter-resistant 1/4" Plexiglas™, the unit is made to disassemble into flat sheets and fit into a tough, nylon carrying case. Total portability means easy, at-thecrime- scene usage. The chamber is easily assembled in less than five minutes, no tools required. The chamber volume is approximately 16 gallons, sufficient for processing multiple items. Transparent walls mean easy monitoring of development. The chamber features an inlet compatible with the PUM1002 Portable Humidifier and SCW100 CYANO-WAND™, a removable inner shelf and multiple evidence hangers. The No. CNA900 portable fuming chamber kit includes a starter assortment of expendables, including THE FINDER™ cyanoacrylate packets, magnetic and regular latent print powders, a magnetic wand, and a Fiberglass brush.

Item #14

Part Number: BMA100    Category: 

BLUEMAXX™ Amalgam Master Kit

Description: SIRCHIE®’s new BLUEMAXX™ Amalgam breaks new ground in LED technology. This palm-sized marvel is a multi-purpose, focused beam instrument that permits use as a hand-held, headmounted, or table-mounted forensic light source. The BLUEMAXX™ Amalgam light source produces an excitation band at the frequency of 470nm—ideal for locating many forms of physical evidence. The six fullpowered LEDs are incredibly energy efficient due to a regulated power supply metering a constant light output. An electronic micro-switch provides seven operational modes: High, Medium and Low Power Brightness; Fast, Medium and Slow Strobe Effect, and Auto Shutoff. An internal power monitor permits estimating battery life and the instrument automatically shuts off when switches are held longer than 30 seconds. When maximum illumination is needed, the Hyper-Glo switch provides the ultimate level of brightness—ideal for evidence photography. An electronic memory circuit recalls the last setting. The BLUEMAXX™ Amalgam requires the use of any of the orange barrier filters provided by SIRCHIE®. It operates on only three AA batteries: Alkaline, Nickel Cadmium, Nickel Metal Hydride or Lithium cells, allowing universal utility. FEATURES: • 6 Powerful Light Emitting Diodes (LEDs) • 470nm light output • Regulated, State-of-the-art Power Supply • Hyper-Glo Mode, ideal for photo illumination source • 7 operation modes offer full versatility • Designed for long life and rugged use • Operates from 3-AA batteries • Up to 8-hours full output operation on High Mode • All electrical contacts are gold plated • Use as Headlamp, Hand-Held, Belt- Mounted or Table-Mounted • Indexing Head swivels a full 180° • Weight: 3.65 oz./103.6gms (without batteries) BMA100 CONTENTS: 1- BMA200 BLUEMAXX™ Amalgam Light w/headband and belt clip 1- BMS300 Orange Barrier Filter Goggles w/case 1- FAC401 FACII Brush w/FAC4011 REDESCENT™ Fluorescent Powder 1- DFS200P DFO Pump Spray, 100ml 1- 125L Standard Magnetic Applicator 1- LL601 REDCHARGE™ Magnetic Powder 1- LL602 ORANGECHARGE™ Magnetic Powder 1- LL605 YELLOWCHARGE™ Magnetic Powder 1- 123RWB WHOPPING Marabou Feather Duster 3- AA Alkaline Batteries 1- Molded Carrying Case, Dimensions: 12.25" x 9.125" x 4"; Weight: 3 lbs.

Item #15

Part Number: 122L    Category: 

"Standard Size Fiberglass Brush, 1/4" dia. x 4 1/4"L"

Description: "These are unquestionably the finest brushes available for developing latent fingerprints. Thousands of specially selected fiberglass filaments form a cloudlike, soft cluster that retains powder and eliminates the constant powder replenishment required for conventional brushes. They are produced on a perfectly balanced, machine-knurled, black anodized aluminum handle for the ultimate in control. The brush is supplied in a protective container and cap. Available in two sizes: Standard measures 4 1/4” long and Kit Size is 2 3/4” long. The reduced handle length makes the kit size brush an exact replacement for conventional brushes found in most fingerprint field kits now in use. "

Item #16

Part Number: RFF200    Category: 

Retractable Fiberglass Brush

Description: "This is an excellent brush that features a fiberglass cluster cloud. The cloud may be controlled and incrementally adjusted. Simply move the retracting shroud and adjust the flair. The shroud protects the fiberglass cluster and ensures unequalled protection from foreign particle contamination, moisture and rough usage."

Item #17 Part Number: 123LW    Category: 

Marabou Feather Duster, white

Description: "Tens of thousands of our standard Marabou Feather Dusters are in use by law enforcement agencies worldwide. Ideally suited for primary and secondary latent print development with any type of powder. Each brush comes with a transparent tube and cap for storage. Available in four colors. SPECIFICATIONS:• Handle and Ferrule Length: 4 5/8"• Feather Length: 4 1/2""

Item #18

Part Number: 125MD    Category: 

MEGAWAND™ MAGNETIC POWDER APPLICATOR

Description: The SEARCH MEGAWAND™ features an expanded coverage area designed especially for dusting a large surface area. The wand holds approximately three times as much powder as the standard wand and features a machined Delrin® housing with spring-loaded ejection. Weight: 1.6 oz.

Item #19

Part Number: M114L    Category: 

Regular Black , 1 oz. (30ml); Net Wt. 81gm

Description: SIRCHIE®’s magnetic latent print powders feature superior ferrous compounds thanks to a unique ballmilling process which ensures uniform, textured powders—every time. These powders are the finest available. Use on any nonferrous surface and with any of our magnetic applicators.

Item #20

Part Number: M116L    Category: 

White, 1 oz. (30ml); Net Wt. 72gm

Description: SIRCHIE®’s magnetic latent print powders feature superior ferrous compounds thanks to a unique ballmilling process which ensures uniform, textured powders—every time. These powders are the finest available. Use on any nonferrous surface and with any of our magnetic applicators.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download