Sieve analysis – method for determining the grain size ...
G342 Sedimentation and Stratigraphy
Laboratory 2
Assoc. Prof. A Jay Kaufman
6 February 2006
Sieve analysis laboratory
A method for determining the grain size distribution of clastic particles typically between 1.0 mm and 0.062 mm (from coarse silt to coarse sand) – a relatively accurate method for determining depositional hydrology and for refining sedimentary environments.
Population dynamics – Random sample is critical to statistically evaluate the sample with respect to the whole population
Gaussian (or normal) distribution – frequency curve
Mean (() – the center or central tendency of the distribution
Standard deviation (() – the variation or dispersion of measurements around the mean
68% within one standard deviation; 95% within two standard deviations ergo, the larger the standard deviation, the less well sorted the sand, the lower the height of the normal frequency curve.
Grain size analyses typically plotted as histograms, cumulative curves or frequency curves
Average size: median, mode, mean. All of these values are a function of size range of available materials and amount of energy imparted to the sediments, which depends on current velocity or turbulence of the transporting medium.
Mean size – The arithmetic average value. A quick graphical definition is (P84+P16)/2
Median size – The P50 value, meaning the value directly in the middle of a grain-size distribution, or the value above and below which 50% of the data lie.
Mode – the most common value (defines distribution).
Standard Deviation – a measure of the dispersion around the mean. A quick graphical definition is (P84-P16)/2
Sorting – depends on size range of the material supplied to the environment, type of deposition, and current characteristics, and also time. Sorting is calculated by the following equation
So = Q1/Q3
Where Q1 and Q3 represent the grain size (in mm or phi size) of the 1st and 3rd quartiles of a grain-size distribution. The closer together those values, the closer sorting is to 1. The farther apart, the larger the value of So gets.
Skewness and kurtosis also important parameters that tell how closely the grain size distribution approaches the normal Gaussian probability curve
skewness – asymmetry of the distribution
kurtosis – peakedness of the distribution
excessively peaked (leptokurtic)
excessively flat (platykurtic)
The Phi scale
Grain-size hydraulics are a function of the diameter (d) squared. As such, a useful grain-size comparison involves log2 of the grain size. Krumbein (1936) used this information to developed the phi scale.
phi (() = - log2d (where d is the diameter in mm)
It is important to remember that as grain-size gets smaller, phi gets bigger.
mm |2 |1 |0.5 |0.25 |0.125 |0.064 |0.032 |0.016 |00.8 | |Phi (ф) |-1 |0 |1 |2 |3 |4 |5 |6 |7 | |
Grain Shape
Still very much terra incognita, grain shape has the potential to tell us volumes about sedimentary transport history, provenance, and depositional environments. There are several standard measures of grain shape.
Sphericity
This parameter defines how well a grain matches a sphere of equivalent volume. This turns out to be very tough to calculate. Zingg (1935) came up with a useful way of characterizing sphericity quickly by comparing the long, intermediate, and short axes of large grains. The ratios of these axes could be compared to each other on a simple plot (Zingg diagram).
[pic]
Roundness
Angularity and roundness are different than sphericity or obliquity. They are an attempt to characterize the roughness of a grain. The official definition compares the average radius of corners and edges vs. the radius of the maximum circumscribing sphere. This is also very tough to calculate. Powers (1953) came up with a quick and dirty visual classification still used today.
[pic]
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- practical 11 formation of anova table for completely
- sas project 2 31 3 pts 4 2 bonus due dec 8
- critical values for cointegration tests
- table of critical values for pearson s r
- critical values for pearson s correlation coefficient
- stata ci tests columbia university
- table a 8 critical values at 5 and 1 significance
- finding t critical values with your calculator
- table of critical values for the f distribution for use
- 9 2 critical values for statistical significance in
Related searches
- baking soda method for drug test meth
- best payment method for selling a car
- determining the level of significance
- race method for answering questions
- determining the theme worksheet
- chlorophyll analysis method sop
- formula for determining rent
- checklist for determining brain death
- correlation analysis method pdf
- determining the number of significant figures worksheet
- analysis method development
- increase the font size in file explorer