CLAMPING UNIT HSK-B - Haas Automation
PRODUCT INFORMATION
CLAMPING UNIT
HSK-B
HSK-B_PE_2017-04 // ENGLISH OTT-JAKOB Spanntechnik GmbH // Industriestra?e 3?7 // D-87663 Lengenwang
+49 83 64 / 98 21 -0 // +49 83 64 / 98 21 -10 // info@ott-jakob.de // ott-jakob.de
PRODUCT INFORMATION
CLAMPING UNIT HSK-B
TABLE OF CONTENTS
1 1.1 1.2 1.3 1.4 1.5 1.5.1 1.5.2 1.5.3 1.5.4 1.6 1.6.1 1.6.2 1.6.3 1.6.4 1.6.5 1.6.6 1.7 1.7.1 1.7.2
2 2.1 2.1.1
3 3.1 3.2 3.3 3.4 3.5
PRODUCT DESCRIPTION..........................................................................................................4 STANDARD................................................................................................................................4 MEDIUM TRANSFER.................................................................................................................5 CEILING SPEED.........................................................................................................................6 TRANSFERABLE TORQUE........................................................................................................6 FORCES AT THE HSK-CLAMPING UNIT..................................................................................7 Clamped position.......................................................................................................................7 Unclamped position..................................................................................................................7 Diagram.....................................................................................................................................8 Table..........................................................................................................................................8 DIMENSION...............................................................................................................................9 Clamping Unit............................................................................................................................9 Drawbar...................................................................................................................................10 Spindle inside contour HSK form A........................................................................................11 Spindle inside contour HSK form B........................................................................................13 Spindle inside contour HSK form E........................................................................................15 Spindle inside contour HSK form F........................................................................................17 ORDER NUMBER.....................................................................................................................19 Assembly tool for HSK clamping unit.....................................................................................19 Dismounting tool for the spacer HSK B.................................................................................19
ASSEMBLY...............................................................................................................................20 CLAMPING UNIT HSK-B.........................................................................................................20 Check after approx. 100 strokes.............................................................................................22
OPERATION.............................................................................................................................23 TOOL INSERTING....................................................................................................................23 OPERATING CONDITIONS......................................................................................................24 INTERN COOLING SUPPLY.....................................................................................................24 COOLANT.................................................................................................................................25 GENERAL.................................................................................................................................25
HSK-B_PE_2017-04
Subject to modification due to technical advance!
// 2
PRODUCT INFORMATION
CLAMPING UNIT HSK-B
4
MAINTENANCE.......................................................................................................................26
4.1
MAINTENANCE INTERVALS...................................................................................................26
4.2
REGREASE CLAMPING UNIT..................................................................................................27
4.3
DISASSEMBLE CLAMPING UNIT HSK...................................................................................27
4.4
EXCHANGE OF THE LIP SEAL................................................................................................28
4.5
BREAK OF A GRIPPER SEGMENT..........................................................................................28
4.6
WEARING PART LIST..............................................................................................................29
4.7
SPARE PARTS..........................................................................................................................30
4.8
REPAIR CLAMPING UNIT HSK B-E........................................................................................31
4.9
TROUBLE SHOOTING HSK......................................................................................................33
symbol explanation:
keep attention dangerous!
keep attention malfunction!
HSK-B_PE_2017-04
Subject to modification due to technical advance!
// 3
PRODUCT INFORMATION
CLAMPING UNIT HSK-B
1 PRODUCT DESCRIPTION
1.1 STANDARD hollow shaft taper ISO / CD 12164-1; form A
features: central, axial coolant supply with KSM-tube keyways at the taper end
application: Bearbeitungszentren, Fr?smaschinen
Hohlschaftkegel DIN 69893-2; Form B
features: decentralized coolant supply over the flange or central coolant supply through coolant tube enlarged flange keyways at the flange
hollow shaft taper DIN 69893-5; form E
application: machining centers, heavy milling machines
features: rotational symmetry without keyways
application: HSC-spindles
hollow shaft taper DIN 69893-6; form F
features: enlarged flange
application: HSC-spindles e. g. machining of wood and plastic
HSK-B_PE_2017-04
Subject to modification due to technical advance!
// 4
PRODUCT INFORMATION
CLAMPING UNIT HSK-B
1.2 MEDIUM TRANSFER
1 without transfer
2
axial transfer for open HSK-tool
cleaning air for closed HSK-tool
HSK-B_PE_2017-04
Subject to modification due to technical advance!
// 5
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- news release ceo succession and appointment of deputy chairman
- chmp position statement on creutzfeldt jakob disease and plasma derived
- creutzfeldt jakob disease surveillance and diagnosis
- creutzfeldt jakob disease cjd and other human prion diseases oregon
- synthetic emeralds grown by richard nacken in the mid 1920s properties
- jakob nacken interview
- jacob koller english bio
- jakob the liar it is clear that jakob is considered credible by some
- railing kit jakob usa
- creutzfeldt jakob disease case report california