ARCAT, Inc.

 SECTION 09 80 00ACOUSTICAL TREAMENTDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2005 - 2015 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** Homasote Company; floor and wall sound barriers, acoustical treatment..This section is based on the products of Homasote Company, which is located at:932 Lower Ferry Rd.West Trenton, NJ 08628Toll Free Tel: 800-257-9491Tel: 609-883-3300Fax: 609-883-3497Email: request info (sales@)Web: [ Click Here ] for additional information.Homasote 440Sound Barrier is controlling sound through millions of square feet of floors, walls and ceilings. a special-density, structural board made from 98 percent environmental Homasote? cellulose fiber, a homogeneous composition manufactured with uniformly distributed protection against termites, rot and fungi and resistance to moisture. It also insulates, with twice the R-value of wood.An internationally known environmental icon, Homasote Company is the oldest manufacturer of building products made from recycled materials in the U.S., and the only manufacturer of its kind in the Americas. Each production day Homasote Company recycles (and keeps out of landfills) up to 250 tons of post-consumer paper. Every production year our unique manufacturing process helps conserve nearly 1.4 million trees and eliminates up to 65 million pounds of solid waste that otherwise would go into landfills.Homasote Company's environmental commitment extends beyond raw material recycling. It is the first manufacturer in the United States to recycle nearly all water used to manufacture its products. Process water, hundreds of thousands of gallons per day, is completely reused in a closed-loop system, a recycling feat recognized in 1956 by an award from the U.S. Army Corps of Engineers (precursor to the U.S. Environmental Protection Agency).A leader in green building years before the first Earth Day was celebrated, Homasote Company naturally is a proud member of the U.S. Green Building Council. From sound control for floors and walls, to tackable interior panels, to roofing products, Homasote Company has a broad range of products with up to 98 percent post-consumer content that can help contribute towards LEED credits in several categories.

GENERAL

SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

Acoustical treatment for the following applications:

Sound deadening material.

Floor decking material.

Roof decking material.

Concrete accessories.

RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

Section 06 10 00 - Rough Carpentry.

Section 07 50 00 - Membrane Roofing.

Section 09 25 23 - Lime Based Plastering.

Section 09 60 00 - Flooring.

REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

American Association of Textile Chemists and Colorists (AATCC) 16 - Colorfastness to light.

APA The Engineered Wood Association (APA): APA AFG-01 - Specification for field gluing subfloors.

American Society for Testing and Materials (ASTM):

ASTM C 209 - Test Methods for Cellulosic Fiber Insulating Board.

ASTM C 518 - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus.

ASTM D 1037 - Test Methods of Evaluating Properties of Wood-Base Fiber and Particle Panel Materials.

ASTM D 1751 - Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction Non-extruding and Resilient Bituminous Types.

ASTM D 2164 - Methods of Testing Structural Insulating Roof Deck.

ASTM E 72 - Standard Methods of Conducting Strength Tests of Panels for Building Construction.

ASTM E 84 - Test Method for Surface Burning Characteristics of Building Materials.

ASTM E 119 /UL 263 /NFPA 251, Fire Tests of Building Construction and Materials.

NFPA 701 - Standard Methods of Fire Tests for Flame Resistant Textiles and Films.

UL1897 Wind Up-Lift Classification: UL-135.

UL Test No. 214 - Standard Tests for Flame Propagation of Fabrics and Films.

SUBMITTALS

Submit under provisions of Section 01 30 00 - Administrative Requirements.

Product Data: Manufacturer's data sheets on each product to be used, including:

Preparation instructions and recommendations.

Storage and handling requirements and recommendations.

Installation methods.

QUALITY ASSURANCE

Manufacturer Qualifications: Minimum 10 years experience in producing sound-deadening boards.

DELIVERY, STORAGE, AND HANDLING

Store products in manufacturer's unopened packaging with labels intact until ready for installation.

Inspect the materials upon delivery to assure that specified products have been received. Report damaged material immediately to the delivering carrier and note such damage on the carrier's freight bill of lading.

Store materials in a dry place, indoors, or on raised platform protected from weather damage.

PROJECT CONDITIONS

Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

Acclimatize panels to existing moisture conditions and for not less than 24 hours before installation. Comply with manufacturer's recommendations for acclimatization.

PRODUCTS

MANUFACTURERS

Acceptable Manufacturer: Homasote Company, which is located at: 932 Lower Ferry Rd.; West Trenton, NJ 08628; Toll Free Tel: 800-257-9491; Tel: 609-883-3300; Fax: 609-883-3497; Email: request info (sales@); Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

Substitutions: Not permitted.

Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

Provide all acoustical wall panels from a single manufacturer.

** NOTE TO SPECIFIER ** Delete if not required.

SOUND DEADENING MATERlAL

** NOTE TO SPECIFIER ** Delete if not required.

Sound Deadening Acoustical Systems: Molded, recycled post-consumer paper, cellulose fiber structural panel; 440 SoundBarrier as manufactured by Homasote Company.

** NOTE TO SPECIFIER ** Delete thickness not required.

Thickness: 1/2 inch (13 mm).

Thickness: 5/8 inch (16 mm).

Thickness: 3/4 inch (19 mm).

Density: 26-28 pcf (416-448 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 450-700 psi (3,100-4,830 kPa).

Transverse: 750-1000 psi (5,171-6,894 kPa).

Hardness (Janka Ball): 230 lbs (104 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209 per ASTM C 518: 2 hour immersion, 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

** NOTE TO SPECIFIER ** Delete R value not required.

R-value: 1.2 for 1/2 inch (13 mm) thick board.

R-value: 1.33 for 5/8 inch (16 mm) thick board.

R-value: 1.4 for 3/4 inch (19 mm) thick board.

K-value: 0.512 Btu-in/ (h ft 2 degreesF).

Noise reduction coefficient (NRC): 0.20.

Flame Spread: 76 to 200 tested in accordance with ASTM E 84, Class III or C.

UL listed, File R16381.

Forest Stewardship Certification (FSC): CoC Cert no. 5682.

ICC-ES Report ESR-1374.

** NOTE TO SPECIFIER ** Delete if not required.

Tackable Sound Deadening Acoustical Systems: Molded, recycled post-consumer paper, cellulose fiber structural panel; PINnacle 440 SoundBarrier as manufactured by Homasote Company.

Thickness: 1/2 inch (13 mm).

Density: 26-28 pcf (416-448 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 450-700 psi (3,100-4,830 kPa).

Transverse: 750-1000 psi (5,171-6,894 kPa).

Hardness (Janka Ball): 230 lbs (104 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209 per ASTM C 518: 2 hour immersion, 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

R-value: 1.2 for 1/2 inch (13 mm) thick board.

K-value: 0.512 Btu-in/ (h ft 2 degreesF).

Noise reduction coefficient (NRC): 0.20.

Flame Spread: 76 to 200 tested in accordance with ASTM E 84, Class III or C.

UL listed, File R16381.

Forest Stewardship Certification (FSC): CoC Cert no. 5682.

ICC-ES Report ESR-1374.

** NOTE TO SPECIFIER ** Delete if not required.

Class "A" Tackable Sound Deadening Acoustical Systems: Molded, recycled post-consumer paper, cellulose fiber structural panel; PINnacleN.C.F.R. as manufactured by Homasote Company.

Thickness: 1/2 inch (13 mm).

Density: 34-40 pcf (545-641 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 400-700 psi (2,758-4,826 kPa).

Transverse: 600-950 psi (4,130-6,555 kPa).

Hardness (Janka Ball): 275 lbs (124 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209:

2 hour immersion: 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.30 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

R-value: 0.85 for 1/2 inch (13 mm) thick board.

K-value: 0.59 Btu-in/ (h sf degree F).

Noise reduction coefficient (NRC): 0.20.

Flame Spread: 25, smoke developed: 20, fuel contributed 0; tested in accordance with ASTM E 84; Class I or A.

UL listed, File R5268, UL Canada CR909.

Forest Stewardship Certification (FSC): CoC Cert no. 5682.

** NOTE TO SPECIFIER ** Delete if not required.

Cork Wall Panel: Class B fire-rated. Natural sustainable cork veneer over panel; a molded, recycled post-consumer paper, cellulose fiber structural panel; NovaCork as manufactured by Homasote Company.

Thickness: 1/2 inch (13 mm).

Substrate: Homasote 440 as manufactured by Homasote Company.

Density: 26-28 pcf (416-448 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 450-700 psi (3,100-4,830 kPa).

Transverse: 750-1000 psi (5.1171-6.894 kPa).

Hardness (Janka Ball): 230 lbs (104 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209:

2 hour immersion: 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

R-value: 1.2 for 1/2 inch (13 mm) thick board.

Noise reduction coefficient (NRC): 0.20.

Flame Spread: 26 to 75 tested in accordance with ASTM E 84, Class II or B.

Edge Detail: All edges are square.

Surface: Natural cork on one side only.

UL listed, File R16381.

Forest Stewardship Certification (FSC): CoC Cert no. 5682.

ICC-ES Report ESR-1374.

** NOTE TO SPECIFIER ** Delete if not required.

Burlap Wrapped Panel: Class C fire-rated. Natural sustainable heavyweight jute fabric over panel; a molded, recycled post-consumer paper, cellulose fiber structural panel; Homasote Burlap Panel as manufactured by Homasote Company.

Thickness: 1/2 inch (13 mm).

Substrate: Homasote 440 as manufactured by Homasote Company.

Edge Detail: Burlap fabric wrapped along long edges only. 4 feet (1219 mm) ends are unwrapped.

Density: 26-28 pcf (416-448 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 450-700 psi (3,100-4,830 kPa).

Transverse: 750-1000 psi (5.1171-6.894 kPa).

Hardness (Janka Ball): 230 lbs (104 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209:

2 hour immersion: 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

R-value: 1.2 for 1/2 inch (13 mm) thick board.

Noise reduction coefficient (NRC): 0.20.

Flame Spread: 76 to 200 tested in accordance with ASTM E 84, Class III or C.

UL listed, File R16381.

ICC-ES Report ESR-1374.

** NOTE TO SPECIFIER ** Delete if not required.

Fabric Wrapped Panel: Class C fire-rated substrate; a molded, recycled post-consumer paper, cellulose fiber structural panel; DesignWall440 as manufactured by Homasote Company.

Substrate: Homasote 440 as manufactured by Homasote Company.

Thickness: 1/2 inch (13 mm),

** NOTE TO SPECIFIER ** Delete size not required.

Size: 4 feet by 8 feet (1219 mm by 2438 mm).

Size: 4 feet by 10 feet (1219 mm by 3048 mm).

Edge Detail: Fabric wrapped along long edges only. 4 feet (1219 mm) edges are unwrapped. Fabric adhered to face of the substrate.

Density: 26-28 pcf (416-448 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 450-700 psi (3,100-4,830 kPa).

Transverse: 750-1000 psi (5,1171-6,894 kPa).

Hardness (Janka Ball): 230 lbs (104 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209:

2 hour immersion: 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

R-value: 1.2 for 1/2 inch (13 mm) thick board.

Noise reduction coefficient (NRC): 0.20.

Flame Spread: 76 to 200 tested in accordance with ASTM E 84, Class III or C.

Fabric: FR701 as manufactured by Guilford of Maine.

Content: 100% percent polyester.

Weight: 16.0 lb. +/- 0.5 lb. per linear yard (16 g/m).

Tensile strength: 150 lb (68 kg) minimum.

Tear Strength: 30 lb (14 kg) minimum.

Colorfastness to Light: No less than Grade 4 after 40 hours, per AATCC 16, Option A.

Colorfastness to Crocking: Class 4 minimum-dry; Class 4 minimum-wet.

Moisture Regain - .5% max.

ASTM E84: Class A.

NFPA-701 Passes.

UL Test No. 214: Passes.

FAA (Para.25.853B): Passes.

NY/NJ Port Authority (FMTS 191-5903): Passes.

Boston Fire Code BFD IX-1: Passes.

State of Massachusetts 527 CMR 21.00: Passes.

State of California Tech Bulletin 117 Section E (CS-191-53): Passes.

GSA-PBS: Passes.

** NOTE TO SPECIFIER ** Delete color not required.

Color: 380 Quartz.

Color: 401 Blue Neutral.

Color: 238 Grey Mix.

Color as selected by Architect from manufacturer's standard range.

** NOTE TO SPECIFIER ** Delete if not required.

Fabric Wrapped Panel: Class A fire-rated substrate; a molded, recycled post-consumer paper, cellulose fiber structural panel; DesignWall550 as manufactured by Homasote Company.

Substrate: N.C.F.R. Homasote as manufactured by Homasote Company.

Thickness: 1/2 inch (13 mm).

** NOTE TO SPECIFIER ** Delete size not required.

Size: 4 feet by 8 feet (1219 mm by 2438 mm).

Size: 4 feet by 10 feet (1219 mm by 3048 mm).

Edge Detail: Fabric wrapped along long edges only. 4 feet (1219 mm) edges are unwrapped. Fabric is adhered to face of the substrate.

Density: 34-40 pcf (544-640 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 400-700 psi (2,755-4,830 kPa).

Transverse: 600-900 psi (4,130-6,555 kPa).

Hardness (Janka Ball): 275 lb (124 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209:

2 hour immersion: 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.30 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

R-value: 0.85 for 1/2 inch (13 mm) thick board.

Noise Reduction Coefficient (NRC): 0.20.

Flame Spread: 0 to 25 tested in accordance with ASTM E 84, Class I or A.

Fabric: FR701 as manufactured by Guilford of Maine.

Content: 100% percent polyester.

Weight: 16.0 lb +/- 0.5 lb per linear yard (16 g/m).

Tensile Strength: 150 lb (68 kg) minimum.

Tear Strength: 30 lb (14 kg) minimum.

Colorfastness to light: No less than Grade 4 after 40 hours, per AATCC 16, Option A.

Colorfastness to Crocking: Class 4 min.-dry; Class 4 min.-wet.

Moisture Regain - .5% max.

ASTM E84: Class A.

NFPA-701 Passes.

UL Test No. 214: Passes.

FAA (Para.25.853B): Passes.

NY/NJ Port Authority (FMTS 191-5903): Passes.

Boston Fire Code BFD IX-1: Passes.

State of Massachusetts 527 CMR 21.00: Passes.

State of California Tech Bulletin 117 Section E (CS-191-53): Passes.

GSA-PBS: Passes.

** NOTE TO SPECIFIER ** Delete color not required.

Color: 380 Quartz.

Color: 401 Blue Neutral.

Color: 238 Grey Mix.

Color as selected by Architect from manufacturer's standard range.

** NOTE TO SPECIFIER ** Delete if not required.

Flooring Cushion Underlayment: Class C fire-rated. Molded, 98% recycled post-consumer paper, cellulose fiber structural panel available only in a 4 feet by 4 feet (1219 mm by 1219 mm) panel with kerfing on the underside; ComfortBase as manufactured by Homasote Company.

Thickness: 1/2 inch (13 mm).

Density: 26-28 pcf (416-448 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 450-700 psi (3,100-4,830 kPa).

Transverse: 750-1000 psi (5.1171-6.894 kPa).

Hardness (Janka Ball): 230 lbs (104 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209:

2 hour immersion: 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

R-value: 1.2 for 1/2 inch (13 mm) thick board.

K-value: 0.512 Btu-in/ (h sf degree F).

Noise Reduction Coefficient (NRC): 0.20.

Flame Spread: 76 to 200 tested in accordance with ASTM E 84, Class III or C.

UL listed, File R16381.

Forest Stewardship Certification (FSC): CoC Cert no. 5682.

ICC-ES Report ESR-1374.

Accessories:

** NOTE TO SPECIFIER ** Installation accessories are dependent on substrates and installation methods as recommended by the manufacturer; Delete items not required.

Adhesive: APA AFG-01 approved sub-floor adhesive.

Floor Panel Fasteners:

Nails, Wood Framing: Annular thread type of length required to penetrate not less than 3/4 inch (19 mm) into subfloor.

Screws: Coarse thread drywall type wood screw of length required to penetrate not less than 3/4 inch (19 mm) into sub-floor.

Metal Frame Clips: Manufacturer's standard clip for securing panels to framing.

Floor Panel Fasteners:

Nails, Wood Framing: annular thread type (ring shank) of length required to penetrate not less than 3/4 inch (19 mm) into subfloor.

Screws: Coarse thread drywall type wood screw of length required to penetrate not less than 3/4 inch (19 mm) into sub-floor.

Wall Panel Fasteners:

Nails: Color coordinated or decorative for paneling. Length required penetrating wood framing 3/4 inch (19 mm) minimum.

Annular threaded nails: Length as required to penetrate into wall studs 3/4 inch (19 mm) minimum.

Screws - General: 20 gage or heavier, self-tapping drywall type steel screw.

Screws - Wood Framing: Coarse thread drywall type wood screw, length as required to penetrate framing 3/4 inch (19 mm) minimum.

Screws - Metal Framing: 22-25 gage, drywall type steel screw.

Drywall fastener for decoupled wall installation.

#10 drywall screw or laminating screw.

** NOTE TO SPECIFIER ** Delete if not required.

FLOOR DECKING MATERlAL

Loading Information: Floor Deck shall adequately support uniform live loads up to 100 lb/square foot (15 kgf/sq. meter) based on a maximum deflection of 1/360 of the span.

Decking: Class C fire-rated. Made up of multiple plies of Homasote 440 structural panel. Made in a 4 feet by 8 feet (1219 mm by 2438 mm) panel size with the tongue and groove down the 8 feet (2438 mm) side; the 4 feet (1219 mm) ends are square edged: 4-Way Floor Deck as manufactured by Homasote Company.

** NOTE TO SPECIFIER ** Delete thickness not required.

Thickness: 1-11/32 inches (34 mm). Joist spacing at 16 inches (406 mm) on center.

Thickness: 1 3/4 inches (44 mm). Joist spacing at 24 inches (610 mm) on center.

Density: 26-28 pcf (416-448 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 450-700 psi (3,100-4,830 kPa).

Transverse: 750-1000 psi (5.1171-6.894 kPa).

Hardness (Janka Ball): 230 lbs (104 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209:

2 hour immersion: 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

** NOTE TO SPECIFIER ** Delete R value not required.

R-value: 3.27 for 1-11/32 inches (34 mm) thick board.

R-value: 4.46 for 1-3/4 inches (44 mm) thick board.

K-value: 0.512 Btu-in/ (h sf degree F).

Noise reduction coefficient (NRC): 0.20.

Flame Spread: 76 to 200 tested in accordance with ASTM E 84, Class III or C.

UL listed, R16381.

Forest Stewardship Council certification: FSC CoC Cert. no.5682.

Accessories:

Adhesive: APA AFG-01 specification sub-floor adhesive.

Wood Floor Joist Fasteners:

Nails: 20d annular threaded (ring shank) nails with 3/8 inch (9.5 mm) heads.

Screws: Flat head coarse thread wood screw of length required to penetrate not less than 1 inch (25 mm) into wood joist.

** NOTE TO SPECIFIER ** Delete if not required.

ROOF DECKING MATERlAL

** NOTE TO SPECIFIER ** Delete if not required.

Roof Deck: Class C fire-rated. Molded, recycled post-consumer paper, cellulose fiber structural panel made from 3 layers of structural board; EasyPly as manufactured by Homasote Company.

Thickness: 2-1/16 inches (52.4 mm).

Size: 2 feet by 8 feet (610 mm by 2438 mm).

Maximum Rafter Spacing for Live Loads of 50 psf (7.6 kgf/sq. meter) Maximum: 48 inches (1219 mm).

Spans are limited by 1/180 deflection expressed in lb per square foot of roof area projected on a horizontal plane and over two or more spans. 10 psf (1.5 kgf/sq. meter) dead load assumed.

** NOTE TO SPECIFIER ** Vapor Barrier: The white vinyl flitter interior finish will serve as a vapor barrier. The installation of additional vapor barriers will be determined by local codes and site conditions. Delete finish not required.

Interior Finish: White vinyl flitter interior finish.

Interior Finish: No finish.

Density: 26-28 pcf (416-448 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 450-700 psi (3,100-4,830 kPa).

Transverse: 750-1000 psi (5.1171-6.894 kPa).

Hardness (Janka Ball): 230 lb (104 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209:

2 hour immersion: 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

R-value: 5 for 2-1/16 inches (52.4 mm) thick board.

K-value: 0.512 Btu-in/ (h sf degree F).

Noise Reduction Coefficient (NRC): 0.20.

Flame Spread: 76 to 200 tested in accordance with ASTM E 84, Class III or C.

UL listed, File R16381.

** NOTE TO SPECIFIER ** Delete if not required.

Composite Roof Deck: Composed of two materials. The interior facing ply shall be composed of one layer of Class A, structural board and the exterior facing is composed of one or more plies; depending on overall thickness, of Class C structural board; Firestall Roof Deck as manufactured by Homasote Company.

Size: 2 feet by 8 feet (610 mm by 2438 mm).with the tongue and groove on the 8 feet (3048 mm) edge. The 2 feet (610 mm) is square edged.

Spans are limited by 1/180 deflection expressed in lb per square foot of roof area projected on a horizontal plane and over two or more spans. 10 psf (1.5 kgf/sq. meter) dead load assumed.

** NOTE TO SPECIFIER ** Consult manufacturer for specific recommendations of tested assembly constructions for required span rating. Delete thicknesses not required.

1 inch (25 mm) Panel Thickness: Maximum rafter spacing for live loads of 50 psf (7.6 kgf/sq. meter) shall be 24 inches (610 mm).

1-3/8 inches (35 mm) Panel Thickness: Maximum rafter spacing for live loads of 50 psf (7.6 kgf/sq. meter) shall be 32 inches (819 mm).

1-7/8 inches (48 mm) Panel Thickness: Maximum rafter spacing for live loads of 40 psf (6.1 kgf/sq. meter) shall be 48 inches (1219 mm).

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

** NOTE TO SPECIFIER ** Consult manufacturer for specific recommendations of tested assembly constructions for required R-values. Delete thicknesses not required.

R-value: 2.05 for 1 inch (25 mm) thick composite board.

R-value: 2.5 for 1-3/8 inches (35 mm) thick composite board.

R-value: 3.1 for 1-7/8 inches (48 mm) thick composite board.

K-value: 0.512 Btu-in/ (h sf degree F).

UL listed: TGIK.R16381.

UL1897 Wind Up-lift testing: UL-90 classification.

Exterior Facing Ply or Plies: Class C fire-rated. Molded, recycled post-consumer paper, cellulose fiber structural panel made from 440 Homasote structural board as manufactured by Homasote Company.

Thickness: 1/2 inches (13mm) plies as required.

Density: 26-28 pcf (416-448 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 450-700 psi (3,100-4,830 kPa).

Transverse: 750 to 1000 psi (5,1171 to 6,894 kPa).

Hardness (Janka Ball): 230 lbs (104 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209:

2 hour immersion: 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209.

Noise reduction coefficient (NRC): 0.20.

Flame Spread: 76 to 200 tested in accordance with ASTM E 84, Class III or C.

Interior Facing Ply: Class A fire-rated. Molded, recycled post-consumer paper, cellulose fiber structural panel made from N.C.F.R. structural board as manufactured by Homasote Company.

Thickness: 1/2 inch (13 mm).

Density: 34-40 pcf (544-640 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 400-700 psi (2,755-4,830 kPa).

Transverse: 600-900 psi (4,130-6,555 kPa).

Hardness (Janka Ball): 275 lbs (124 kg) tested in accordance with ASTM D 1037.

Water Absorption by Volume: When tested in accordance with ASTM C 209:

2 hour immersion: 7 percent maximum.

Expansion: 50 to 90 percent relative humidity, 0.30 percent in accordance with ASTM C 209.

Class I or A. Flame spread 25, fuel contributed 0, smoke developed 20 as per ASTM E 84.

** NOTE TO SPECIFIER ** Delete if not required.

CONCRETE ACCESSORIES

Concrete Expansion Joint Filler: Molded, recycled post-consumer paper with wax binder, cellulose fiber structural joint filler; Homex300 as manufactured by Homasote Company.

Thickness: 1/2 inch (13 mm).

Density: 26-28 pcf (416-448 kg/cu. m) tested in accordance with ASTM C 209.

Tensile Strength: When tested in accordance with ASTM C 209:

Parallel: 450-700 psi (3,100-4,830 kPa).

Transverse: 750-1000 psi (5.1171-6.894 kPa).

Hardness (Janka Ball): 230 lbs (104 kg) tested in accordance with ASTM D 1037.

Compression and Recovery: 70% tested in accordance with ASTM D 1751.

Extrusion: 0.086 inch (2.18 mm) tested in accordance with ASTM D 1751.

Weathering: No disintegration, tested in accordance with ASTM D 1751.

Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209.

Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518:

R-value: 1.2 for 1/2 inch (13 mm) thick board.

K-value: 0.512 Btu-in/ (h ft 2 degreesF).

Conforms to the performance requirements of AASHTO M213.

Conforms to the performance requirements of U.S. Federal Spec. HH-F-341e.

Conforms to the performance requirements of FAA Specification P-610-2.7.

UL listed, File R16381.

Forest Stewardship Certification (FSC): CoC Cert no. 5682.

ICC-ES Report ESR-1374.

Accessories:

Plastic edge caps (zip strips).

Expansion Joint Filler Sealers:

Cold applied sealers composed of: urethanes, silicones and polymers.

Hot applied sealers composed of: thermo-set rubbers, silicones, asphaltic and two-part epoxies.

EXECUTION

EXAMINATION

Examine substrates upon which work will be installed.

If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

Verify what environmental conditions are, and will continue to be maintained in accordance with manufacturer's recommendations.

Starting work by installer is acceptance of substrate and environmental conditions.

** NOTE TO SPECIFIER ** Delete if not required.

SOUND DEADENING MATERIAL INSTALLATION

Follow manufacturer's instructions by separating and allowing panels to be exposed to environmental temperature and humidity conditions for not less than 24 hours before start of installation.

Install in accordance with manufacturer's instructions.

** NOTE TO SPECIFIER ** PINnacle panels are to be installed in a clean, dry condition. Do not install wet panels.

Install only clean dry panels. Do not install wet panels.

Floor Panel Installation: Space panel joints 3/16 inch (5 mm) apart; 3/8 inch (10 mm) space at walls and partitions. Stagger joints.

Wall Panel Installation: Space panel joints 1/8 inch (3 mm) apart; 1/4 inch (6 mm) space at floors, ceilings, and window and door frames. Install gypsum wallboard or other wall finish panels first so that finish panel joints are staggered and do not coincide with panel joints. Install in accordance with finish panel manufacturer's installation recommendations.

Protection:

Protect installed products until completion of project.

Touch-up, repair, or replace damaged products before Substantial Completion.

Cleaning:

Comply with manufacturer's recommendations for repairing damaged panels.

Clean by light sanding by using 280-320 grit sandpaper.

** NOTE TO SPECIFIER ** Delete if not required.

FLOOR DECKING INSTALLATION

Examination:

Examine the framing upon which the decking will be installed.

Verify framing member spacing complies with manufacturer's requirements.

If framing installation is the responsibility of another installer, notify Architect of unsatisfactory installation before proceeding.

Verify that framing is clean, parallel, level and dry prior to installation.

Starting work by installer is acceptance of framing and environmental conditions.

Preparation:

Follow manufacturer's instructions regarding adhesives, fastening schedules, additional framing and installation procedures.

Installation:

Install in accordance with manufacturer's instructions.

Install only clean dry panels. Do not install wet panels.

Space panel joints at butt ends 1/8 inch (4 mm) apart. Stagger joints.

If partition wall parallels floor joists, adequate support framing must be installed under partition plate.

In projects using the "post and beam" construction technique (common in straw-bale home construction), provisions must be made for the weight bearing columns to rest on bulwarks, not the 4-Way deck to prevent point load compression in the deck.

Protection:

Protect installed products until completion of project.

Periodically remove excess dried mud, scrap, dropped fasteners, sawdust and other debris from surface during the construction process.

** NOTE TO SPECIFIER ** Delete if not required.

CONCRETE ACCESSORIES INSTALLATION

Install in accordance with manufacturer's instructions.

END OF SECTION ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download