Light My Bricks LEGO Ninjago City Gardens 71741 Light Kit ...
NINJAGO CITY GARDENS 71741 LIGHT KIT INSTALLATION GUIDE - PART 1
Light My Bricks
INSTALLATION GUIDE
1
LEGO? Ninjago City Gardens 71741 Light Kit Installation Guide Part 1
Hi There, we're Light My Bricks!
We're here to help you get started on part 1 of the LEGO? Ninjago City Gardens (71741) Lighting Kit.
To access part 2 of the installation guide please visit our instructions portal to find the download link.
This PDF details the instructions for the LED light kit only. If you are wishing to purchase this LED Lighting Kit , please click here to view the product page.
Before you begin, please check that you have all the correct quantities of components as per the package contents listing.
Have fun and enjoy!
NINJAGO CITY GARDENS 71741 LIGHT KIT INSTALLATION GUIDE - PART 1
PACKAGE CONTENTS: 14 x White Strip Lights * 13 x Blue 30cm Bit Lights * 10 x White 15cm Bit Lights * 1 x White 30cm Bit Lights 8 x Pink 30cm Bit Lights 3 x Green 30cm Bit Lights 5 x Cool White 15cm Bit Lights 5 x Cool White 30cm Bit Lights 1 x Flashing White 30cm Bit Light 2 x Yellow 15cm Bit Lights
8 x 6-Port Expansion Board 4 x 8-Port Expansion Board * 1 x 12-Port Expansion Board 1 x Flicker Effects Board
10 x 5cm Connecting Cables * 13 x 15cm Connecting Cables * 3 x 30cm Connecting Cables
1 x USB Power Cable (Power Source not included - sold separately)
INSTALLATION GUIDE
PACKAGE CONTENTS
2
LEGO PIECES:
8 ? Plate 1x6 (Any Colour) 8 ? Black 1?1 Modified Plate Rounded w Handle * 15 ? Black Round Plate 1x1 w Open Stud * 3 x Black Arm Skeleton, Bent w Clips (Horizontal
Grip) 5 ? Black Tile 1x1 w Clip 2 ? White Round Plate 1x1 w Open Stud 5 ? Trans Clear 2x2 Plate w Rounded Bottom 1 ? Black Plate 1?2 modified w Handle on End 1 ? Black Plate 1?2 modified w stud jumper 1 ? Black Plate 1x6 5 ? Trans Clear Round Plate 1x1 1 ? Trans Red Round Plate 1x1
* Indicates 1 extra component has been included just in case!
NINJAGO CITY GARDENS 71741 LIGHT KIT INSTALLATION GUIDE - PART 1
Contents
INSTALLATION GUIDE
CONTENTS
3
4.
Before You Begin
7.
Part 1.
35. Troubleshooting
40. Contact
PDF.62. Part 2.
NINJAGO CITY GARDENS 71741 LIGHT KIT INSTALLATION GUIDE - PART 1
Before You Begin
LAYING CABLES IN BETWEEN AND UNDERNEATH BRICKS Cables can fit in between and underneath LEGO? bricks, plates, and tiles providing they are laid correctly between the LEGO? studs. Do NOT forcefully join LEGO? together around cables; instead ensure they are laying comfortably in between each stud. CAUTION: Forcing LEGO? to connect over a cable can result in damaging the cable and light.
INSTALLATION GUIDE
BEFORE YOU BEGIN
4
CONNECTING CABLE
CONNECTORS TO EXPANSION
BOARDS
Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be inserted only one way. With the expansion board facing up, look for the soldered "=" symbol on the left side of the port. The connector side with the wires exposed should be facing toward the soldered "=" symbol as you insert into the port. If a plug won't fit easily into a port connector, do not force it.
Incorrectly inserting the connector can can result in bent pins inside the port or possible overheating of the expansion board when connected.
NINJAGO CITY GARDENS 71741 LIGHT KIT INSTALLATION GUIDE - PART 1
Before You Begin
CONNECTING CABLE CONNECTORS TO STRIP LIGHTS Take extra care when inserting connectors to ports on the Strip Lights. Connectors can be inserted only one way. With the Strip Light facing up, ensure the side of the connector with the wires exposed is facing down. If a plug won't fit easily into a port connector, don't force it. Doing so will damage the plug and the connector.
INSTALLATION GUIDE
BEFORE YOU BEGIN
5
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the micro connectors to micro ports of Micro Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is similar to connecting lights and cables to Strip Lights. With the expansion board facing up, ensure the side of the connector with the wires exposed is facing down. If a plug won't fit easily into a port connector, do not force it. Use your fingernail to push the plastic part of the connector to the micro port.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- movie director interview
- light my bricks lego ninjago city gardens 71741 light kit
- the new 2014 complete guide to lego city my city
- 60052 lego
- 2018 review of chinese clone brands
- media
- grant proposals template with samples new mexico state
- brickseparator
- my xl world lego education
- masterclass executive program