C3000Z-CenturyLink QSG VCZD001-4-16-002-0 Ed1 2017-4-25 Draft4

C3000Z

WiFi-N/AC 2.4G 3x3 /5G 4X4 VDSL2 4-port Bonding Combo WAN IAD

Version CZD001-4.16.002.0 Edition 1, 04/2017

Quick Start Guide

Quick Start Guide

Default Login Details

LAN IP Address



User Name

admin

Password

Check the device label



Copyright ? 2017 ZYXEL Communications Corporation

Device Panels

POWER RESET USB SLOT LAN/WAN

PORT

ETHERNET PORTS 1-4

DSL PORT

POWER DSL INTERNET WAN/LAN

ETHERNET 1-4 USB WIFI 2.4G WIFI 5G WPS BUTTON

2

Overview

The Device is a VDSL2 bonding integrated access device (IAD) with a four-port built-in Ethernet switch and IEEE 802.11ac wireless. The Device allows wired and wireless clients to safely access the Internet. Additionally, the Device includes a Gigabit Ethernet LAN port that can also serve as a WAN connection to support a dual WAN function. The USB port allows you to connect a USB memory stick or USB hard drive for storing or sharing files through the network.

Requirements

Make sure you have the following things before you start. ? Internet access - account information provided by your ISP, such as user name, password, and so on. ? Internet Explorer 8.0 and later versions, with JavaScript enabled, or Mozilla Firefox 14 and later versions.

3

Hardware Connections

4 3 2

1

4

1. Use a telephone cable to connect your Device's DSL port to a telephone jack (or the DSL or modem jack on a splitter if you have one).

2. ETHERNET: Use an Ethernet cable to connect a computer to a LAN port for initial configuration and/or Internet access.

3. USB: You can connect a USB memory stick or a USB hard drive for file sharing. The Device automatically detects the USB device. Alternatively, use a USB cable (not provided) to connect a USB printer to this port.

4. POWER: Use the provided power adaptor to connect the POWER socket to an appropriate power source. Make sure the power at the outlet is on. Look at the lights on the front panel.

? The POWER light blinks while your Device starts up and then stays solid green once it is ready.

? The DSL lights are solid green after your Device has a DSL connection.

? The INTERNET light turns on when the Device is able to access the Internet and blinks when the Device is sending or receiving data.

? The WAN/LAN light is on if the WAN/LAN port is properly connected and blinks when there is traffic.

? Each ETHERNET light is on if the corresponding LAN port is properly connected and blinks when there is traffic.

? The USB light turns on when there is a USB printer or memory device is connected to the Device and blinks when transmitting data.

? The WiFi 2.4G light is green when the wireless LAN is ready and blinks when there is traffic.

? The WiFi 5G light is green when the wireless LAN is ready and blinks when there is traffic.

? The WPS light is green when WPS is enabled and blinks amber while WPS is in process.

If the lights do not come on, check your connections and inspect your cables for damage. If the lights are still off, contact technical support.

5

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download