Consolidated Tender Document
MIRPUR UNIVERSITY OF SCIENCE & TECHNOLOGY (MUST)CONSOLIDATED TENDER DOCUMENTFORIT Equipment, Lab Equipment and office Equipment (TENDER NO: TR/P&S/2942/2016)Last Date for Submission: 21 Jan. 2017 at 11:00 AM Bid Opening Date: 21 Jan. 2017 at 11:30 AM*Tender Fee (Rs: 2500- none refundable) in favor of Treasurer MUST Mirpur AJKPrepared and Issued By:Secretary Central Purchase CommitteeWebsites: must.edu.pkTel no. 05827-961046, Fax no. 05827-961039Email: dy.treasurer@must.edu.pkNOTICE INVITING TENDERS“DEFINITIONS”MUST: Mirpur University of Science & Technology.SLA: Service Level Agreement. The level of service which MUST purchases from vendor in respect of the serviceRFP: Request for Proposals. BOQ: Bill of Quantities.Warranty/Services of items/parts: On Site Warranty. All hardware, support, repair, replacement, backups, preventive maintenance, onsite service monthly , quarterly, batteries, power boards , Keypads , mouse , chargers , Lenses , electrification etc. and services of all software including its installation, configuration, updates, upgrades & principal online support. All patches upgrades, updates and OS images and its deployment as and when announced.Total Bid Value: Cost of Equipment (including optional equipment) Cost of Extended Warranty and Cost of services as per tender document including all AJK Govt. Taxes.Total Contract Value: Cost of Equipment, Warranty and Services as per the supply order by MUST at the time of Contract / Agreement / supply order.Prospective bidder: Bidder who intend to participate in the tender processBidder: Bidder who submit the proposal.Selected Bidder: Lowest Evaluated Bidder selected for the award of tender / contract.INTRODUCTION:Mirpur University of Science and Technology (MUST), Mirpur is chartered with Government of Azad Jammu and Kashmir through ordinance XVIII of 2008 on 15th day of August 2008. The objective laid down in ordinance is “To enhance facilities for higher education and research in the State of Azad Jammu & Kashmir”. MUST is committed to the development of human resource by imparting quality education to masses as well as inculcating in them human values of the highest level to promote a peaceful and harmonious society for a global fraternity capable of facing the future challenges. MUST aims at producing human resource capable of transforming the society into a technologically advanced nation.To nurture talent and create the environment conducive to higher learning.To produce hardworking, committed, dedicated and national professionals.To develop collaboration with other renowned local and foreign institutions/ research organizations.We are equipping our laboratories with modern apparatus so that we may be able to slake the thirst of our students. The MUST is determined to produce such material as to prove the grist to the mill of the nation and not the fake one at all. Enhancement of standard is our pivotal goal and we are doing our best to make the MUST worthy by all standards. It will touch the bliss of eminence in a short span of time.SCOPE OF WORK:The scope of the project is to supply and Installation of all IT equipment and components/Lab Equipment and other items requested in tender document at Mirpur University of Science & Technology (Mirpur/Bhimber Campus of the University. Following requirements define the scope of work of this tender.The Selected Bidder will be responsible for the supply, installation, Integration, testing, commissioning, maintenance and spare parts and Service provision for all equipment/entities at MUST designated sites.Selected Bidder must ensure that the supplied equipments are fully operational, new and perform properly and meet RFP's Technical Specifications.TENDER FEE:Rs: 2500/- is required as tender fee (nonrefundable), bank draft or deposit slip in account of treasurer MUST HBL main Branch Mirpur AJK.TENDER OPENING VENUE:Tenders will be opened by the central purchase Committee in the presence of bidders at Meeting Hall MUST ADMIN BLOCK, Sector B-3, Allama Iqbal Road Mirpur AJK, on the same date.DOWNLOADING TENDER DOCUMENT:The Tender Document will be available on University web site must.edu.pk within two days of the publication of tender notice.PRICE / RATE:Please quote unit price for each item on F.O.R basis MUST MIRPUR and bidder may also quote price on C&F basis with all terms and condition.DELIVERY PERIOD:Please mention the delivery time after placing the Purchase Order for each item.EXTENSION IN DELIVERY PERIOD:MUST shall not provide extension in delivery period in any case, unless any emergency occurs. Suppliers are advised to provide delivery period considering time required for custom clearance or any other factors. We may only provide extension on deduction of 2% of Purchase order as fine. PENALTY CLAUSE:If you fail to supply the material in the above specified period, MUST reserves the right to blacklist you for future business or forfeit the security money or may impose any other financial penalty as deemed fit.An affidavit is required to the effect that the firm has not been blacklisted by any Government/Semi Government organization for last five years. INSTALLATION / COMMISSIONING OF THE EQUIPMENT:Equipment will be installed / commissioned by the trained engineer (s) of supplier / contractor at Mirpur University of Science and Technology, Mirpur AJK, free of charge / are including in the cost and supplier/ contractor also provide training if required.TRAINING: Suppliers are responsible to provide operational training if required for any lab equipment. WARRANTY:Please indicate the warrantee period and terms & conditions of the warranty for each item clearly. We only accept onsite warranty.PROCUREMENT METHOD/ SUBMISSION OF BIDS:Single stage – one envelope procedure.-?Each bid shall comprise one single envelope containing, separately, financial and technical proposal for each department as divided in BOQ. All bids received shall be opened and evaluated in the manner prescribed in the bidding document. IMPORTANT INSTRUCTIONS: All bidders are advised to visit University website till last day of bid opening for any expected change or corrigendum in this tender notice or document.Financial/Commercial Offer: Bidders are directed to construct financial offer as per following Performa:Serial # as per Tender Document/ BOQItem NameCountry of OriginModel F.O.R. Rates C&F Rates12Optional Rates: We shall not allow bidder to quote optional Rates for any Item.Accessories or Optional Items: If Bidder found anything or part which is important and missing in specification settled in BOQ, in such case bidders are directed to add price of that part in final price. We shall not allow quoting optional accessories price separately. If anything is less important and its addition may enhance performance of equipment, such items may be quoted in technical offer with price only.Separate Bid: We required separate bids for each department as divided in BOQ below.Brand or Model: If this Tender Document contains any Model or Brand Name is just for a reference “Or Equivalent” word should be considered for such cases and any bidder may quote for that brand.Firms should quote with installation cost, university shall bear only civil work cost, and all other installation cost shall be included.Tender Fee: It should not be the part of Bid; we required it separately before bid submission time. BILL OF QUANTITIES WITH REQUIRED SPECIFICATIONS:I.T Equipment/ Hardware / Plant & Machinery (Separate quotation is required for this)Sr. No. ItemSpecificationsQtyNo.SpecsMarksWorst---best (Value)551.All In One Computer1Processor Type10Core i5 5th Generation / Higher / ivy or Equivalent2Processor Speed10Intel Core i5-6500 3.2G 6M 2133 4C CPU/Or/Quad Core, 6MB, 4T, 3.2GHz, 65W3Chipset Series with Manufacturer5Intel H110- Intel? Q87 or Higher4RAM with Type108GB RAM or Higher5RAM slots with Capacity58GB DDR4 2133 SoDIMM – 8GB DDR4-2133 DIMM (1x8GB) RAM6HDD with Type101 TB HDD or Higher7Cache Memory1032GB max, DDR4 2133, two 260-pin SO-DIMM sockets, dual-channel capable/or/2 SODIMM s(Memory Slots), Maximum 32GB /or/Equivalent8Card Reader5Media Card Reader/or/Optional9Video Graphics5Intel HD Graphics 510/530 in processor/or/Intel? HD Graphics 460010Audio5HD audio with Realtek ALC221VB/or/Any11CD/DVD RW5DVD Writer/or/Any12Ethernet5Integrated Realtek RTL8151GD Ethernet LAN 10/100/1000/or/Gigabit/or/Standard13Wifi/WLAN5WLAN 802.11a/g/n (2x2)/or/Standard/or/Equivalent14Bluetooth5Standard/or/Any15Webcam52.0 megapixel webcam/or/Higher16Display Screen Size1019 inches LED or Higher17I/O Ports52 x USB 3.0, 4 x USB 2.0, 1 x Serial (RS-232), 2 x PS/2 (1 for Keyboard & 1 for mouse), 2 x Video Ports (1 ?VGA 1 Display port with multistream), 2 x Audio Ports ( Headfon / mic, line in/out 3.5mm diameter), 1 x RJ-4518Keyboard and Mouse10USB Keyboard and Optical Mouse/or/Better19Supporting OS5Windows 10 and Linux/or/Higher20Warranty Period and Type5At least 3 year warranty with service /or/ 21Association with the brand (Partnership Level)5Manufacturer preferable/o/Authorized Partner22Battery?10120W built-in power supply/or/External Power Supply23Other feature?2. Desktop Computer1Processor Type10Core i5/i7 6th Gen Quad Core/or/Intel Core i5/i7/or/Equivalent 752Processor Speed104 Cores / 4 Threads, 3.30 GHz, up to 3.7 GHz/or/Higher3Chipset Series with Manufacturer10INTEL Q170/or/INTEL B150orIntegrated4RAM with Type108GB DDR4-2133 DIMM (1x8GB) RAM/or/DDR4/or/8 GB DDR4(2133)5RAM slots with Capacity10Up to 32 GB, 2 x DDR4 Slots/or/2 DIMM s(Memory Slots), Maximum 32GB/or/Higher6HDD with Type10HDD SATA III 1000GB 7.2k/or/1TB 7200 RPM SATA 6G 3.5 7Cache Memory106 MB total cache/or/Higher8Video Graphics10Intel HD Graphics 510/530 in processor/or/Intel? HD Graphics 46009Audio10HD audio with Realtek ALC221VB/or/Intel Integrated /or/Internal Speakers10CD/DVD RW109.5mm Slim Desktop SuperMulti DVDRW /or/DVD Writer11Ethernet10Realtek RTL8111HSH-CG GbE Ethernet Controller/or/10/100/1000 MBit/s Realtek RTL 8111G12Display Screen Size 1020-IN LED LCD Monitor/or/Equivalent13I/O Ports102 x USB 3.0 (Front), 2 x USB 3.0 (Rear), 4 x USB 2.0 (Rear), 1 x Serial (RS-232), 2 x PS/2 (1 for Keyboard & 1 for mouse), 2 x Video Ports (1 ?VGA 1 Display port with multistream), 2 x Audio Ports ( Headfon / mic (Front), line in/out 3.5mm diameter (Rear)), 1 x RJ-4514Keyboard and Mouse5USB Keyboard & Mouse15Supporting OS5Windows 10 and Linux/or/All Major OS Supported16Warranty 203 years +17Association with the brandManufacturer preferable/o/Authorized Partner3.Laptop Core i5/i7 or equivalentProfessional Book1Processor Type and Generation10Core i5 5th Generation/ ivy/i7 or Equivalent31+172Processor Speed103.30GHz and Higher3Chipset Series with Manufacturer5Intel Chipset Integrated4RAM with Type108 GB DDR3 and Higher5RAM slots with Capacity52 up to 32GB Supported6HDD with Type101TB 5400rpmAnd Higher7Cache Memory104MB and higher8Touch Pad5Standard9Battery104 Cells and Higher 10Card Reader511-in-1 or Multi Card Reader11Video Graphics5Intel HD Graphics 12Audio5HD audio with Realtek ALC221VB/or/Intel Integrated /or/Internal Speakers13CD/DVD ROM5DVD Writer14Ethernet5Integrated Realtek RTL8151GD Ethernet LAN 10/100/1000/or/Gigabit/or/Standard15Wifi/WLAN5WLAN 802.11a/g/n (2x2) , Dual Band/or/Standard/or/Equivalent16Bluetooth5Bluetooth ? 4.0 or Standard17Webcam52.0 megapixel webcamAnd Higher18Display Screen Size1014” LED and Higher19I/O Ports52 x USB 3.0, 4 x USB 2.0, 1 x Serial (RS-232), 2 x PS/2 (1 for Keyboard & 1 for mouse), 2 x Video Ports (1 ?VGA 1 Display port with multi stream), 2 x Audio Ports ( Head phone/ mic, line in/out 3.5mm diameter), 1 x RJ-4520Keyboard and Mouse5Standard21Supporting OS5Windows 10 and Linux/or/Higher22Carry Case Type n Part No.5Original Carry Case bearing company part number23Warranty period and Type5At least 3 year warranty with service 24Association with the brand/ Principal5Manufacturer preferable/or/Authorized Partner 4.Projector Screen1Size and type10Large, Motorized (Size: 8x6 or higher)165.Multimedia Projector with complete installation.1Product Name / Model104220 Projector/Sony VPL-VW300ES/BenQ W1070+/Sony VPL-VW520ES/Epson EH-LS10000 162Country of Origin / Made in5?US/China/Malaysia/Singapore/Japan or equivalent3Ceiling Kit?10Yes4VGA Cable5Yes5Lamp Life105000 hours or higher6Brightness51500 Lumens or Higher7Remote Control5Yes8No of Colors51.07 billion colors or higher9High Contrast52000:1 typical (Full On/Full Off)10Ports5Power:VGA INPUT:VGA OUTPUT:S-VIDEO INPUT:COMPOSITE VIDEO INPUT:HDMI INPUT:ANALOG AUDIO INPUT:VARIABLE AUDIO OUTPUT:USB PORT: RS232 PORT:RJ45 PORT:12V OUTPUT11Built in Speaker52x 5W speaker / 32 dB(A) Eco-Mode12Warranty Lamp51 Year Projector Bulb Warranty or Higher with service13Warranty Machine51 Year or Higher with service 14Resolution10NUMBER OF PIXELS1920 x 1080 or higherCONTRAST RATIO2000:1 typical (Full On/Full Off)DISPLAYABLE COLORS1.07 billion colors VIDEO COMPATIBILITYComposite Video/S-Video input: NTSC [J, M, 4.43)PAL (B, D, G, H, I, M, N, Nc, 60)SECAM (B, D, G, K, K1, L)Component Video via VGA input:480i/p, 576i/p, 720p, 1080iComponent Video via HDMI input:480i/p, 576i/p, 720p, 1080p15Other FeatureLCD technology16Carry Case?5Original Carry Case bearing company part number17Association with principal5?Manufacturer preferable/or/Authorized Partner6.Licensed SoftwareANSYSPRO-ELEAPSPSSMATLAB1Maintenance and Regular updates including updates to toolboxes must be included for three years 10001 Each7.DSLR (CMOS) Camera with Lens1Resolution1018 Mega Pixel --- 25 Mega Pixel012ISO 10Auto, 100-160003Screen102.5--3’’ Touchscreen with 170 deg wide angle viewing4Image stabilizerYes5Shutter speed1030s, 1/4000 ---- 1/80006Continuous ShootingYes7Self-timer52sec --- Custom8Video (with sound)10Full HD 1920x1080p (60fps)9Built in FlashYes10Wifi Connectivity5Yes --- No11Rechargeable Battery10400 Shots --- 600 Shots12LensFocal Length1055-125mm ---- 55-300mmMin to Max aperture10f/22-f/29 ----f/4.5-f/5.6FocusManual and Auto both13Warranty103 years ---- 5years8.Finger Print Reader1Virdi or equivalent with complete SDK50012Warranty503years --- 5 years9.WebcamLogitech or equivalent1Video Resolution50Full Hd 1920x1080p (video calling)012Picture Resolution3010 Mega pixel --- 18 Mega pixel3Microphone and Skype certifiedYes4Warranty6 months ---- 1year10.Digital Camcorder1Resolution10Full Hd 1920x1080p --- 4K Ultra HD 3840x21602Shutter speed101/25-1/8000 ---- 1/25-1/100003Aperture Range10f/1.8-f/3.6 ---f/1.8-f/2.84Focal Length103-75 ---2.8-1165Screen5Tilt able Touch Screen6Still Image Resolution101920 x 1080p --- 4992 x 2808p7Zoom (Optical, Digital)1520,60 ---- 40, 4008Wifi5No---Yes9Battery (Rechargeable) Life103 hrs ---- 10hrs10Built In Flash5No---Yes11Warranty103 years --- 5 years11.24 Port Layer 3 Manageable Switch124 port fast Ethernet, 2 or more gig or 2 combo ports0412.48 Port Layer 3 Manageable Switch148 port fast Ethernet, 2 or more gig or 2 combo ports0613.24 Port Layer 3 Manageable Switch124 port gig with 2 SFP (With and without POE)0114.8 Port Manageable Switch L2/L3With and without POE0515.Router wifi with wall-mount bracketRUKUS 600 or higher0216.Air Conditioner1Capacity4012000 BTU (1-ton)---- 24000 BTU (2-ton)332Installation Kit30No----- Yes3Make4Warranty30No----- Yes17.UPS1Capacity503KVA----5KVA052Input AC, Sine Wave220v-250v, 50H 3Make4Warranty50No---- Yes18.Batteries1Capacity40140 Amp---- 200 Amp122Type30Liquid---- Dry3Make4Warrantee306 Month--- 1 year19.Photo State Machine1Type10No----Digital/Printer072Speed1550cpm---100 cpm3Paper Capacity15500---2100 pages4Automatic Document feed10No--- Yes5Duplex15No---- yes6Network Printer15No---- Yes7Reduce/ Enlarge10No--- 40% to 500%8Make9Warranty/After Sales Service10No---- Yes20.Printers1Interface30USB---- Wireless262Type 20Ink Jet--- Laser3Resolution 201200X1200 dpi---- Higher4Make5Warranty30No--- Yes21.Water Cooler1Capacity3045 Gallon---- 65 Gallon202Thermostat20Manual--- Automatic3Body20Other--- Steel4Make5 Warranty30No--- Yes22.Water Dispenser1Capacity203L-----5L102Cold Water Capacity101------3 L3Hot Water Capacity101---- 2 L4Refrigerator20No---- Yes5Make6Condenser20Single ---- Double7Warranty20No---- Yes23.Fax Machine1Fax Resolution108 pels x 7.7 lines/mm---- Higher012Scanning Speed1010 sec./page ---- Less3Printing Method20Inkjet-----Thermal4Print Resolution10600X600dpi ---- Higher5Paper Capacity20100 Sheets--- Higher6Print Speed105 Page--- Higher7Make8Warranty20No---- Yes24.Electric Kettle1Body30Plastic---- Steel052Capacity301L----- 2L3Make4Warranty40No----- Yes25.Scanner (Color)1Scan Size30A4---Legal102Optical Resolution204800x4800---9600x96003Power10AC---USB4Light source10Multi-Color LED--- White LED5Scan Speed520s --- 40s at max resolution6PDF File Creation5No --- Yes7Automatic Document Feeder5No --- Yes8Software Included5No --- Yes9Warranty101year---3year26.Microwave1Capacity2017 L--- 30 L052Power Levels203 ----73Control Panel----Dial Only4Power10700W-900W5Warranty501year---3year27.Vacuum Cleaner (Cylinder)1Power20500W---2KW022Capacity202L----10L3Bag Full Indicator10No --- Yes4Power Cord Length205m --- 10m5Power Cord Storage10No --- Yes6Warranty201y --- 3y28.Blower1Warranty1001y --- 3y0529.Fridge1Capacity30200L---425L042Warranty703y --- 10y30.Sound System1Wall Speakers3030W---50W0621 Rostrum Mike and 1 Wireless (Hand held) MIC20---3Amplifier30200W---400W4Warranty201y---5y31.Telephone Exchange 100 Lines 1All wiring, Ethernet Support, IP Telephony, Wi-Fi Extension, Android and IOS SupportMust required012Warranty1001y---5y32.Telephone Exchange 300 LinesAll wiring, Ethernet Support, IP Telephony, Wi-Fi Extension, Android and IOS SupportMust required012Warranty1001y---5y33.Wall Bracket Fan14014inch---20inch172Power3060W---80W3Warranty301y---3y34Smart TV/ LED60”to 7o ” Original Samsung or Equivalent535.Grass Cutting Machine (Lawn Mower Manual)1Blade Width2030cm---45cm022Cutting Height (variable)4012mm---45mm3Grass Collector2020L----50L4Warranty201y---5y35Video Conferencing room renovation( Details in annexure-I)-36Data Centre Point and cable trays renovation-37Color Printer0238Network PrinterInterfaces: Network, USB, Wireless network, 1200x1200 dpi or higher0239NAS30 TB with RAID0140Unified Storage Area Networks (SAN)Storage must feature fiber channel. The architecture should allow modular upgrades of hardware and software for investment protection. Storage Array should be configured in a No-Single-Point-of-Failure Architecture.The storage should be supplied with 32 GB cache upgradable to 192 GB cache.Extreme Cache (EXC) Capacity 800GBCache should be mirrored between the Active-Active controllers (load balancing). The paths should be redundant (at least 2 paths) to prevent disruption if one path fails. Must support either Cache battery backup for a minimum of 36 hours or fully automatic de-stage of cache to disks or it should be non-volatile DIMM (NVDIMM) during power failure to prevent possible data loss.Array should capable to must support following functions.Data Block Guard, Data Encryption, Cache Protection, Disk Drive Patrol, Global Hot Spare, Dedicated Hot Spare, Fast Recovery, Storage Cluster, Eco-mode (MAID), Advanced Copy function, Remote Advanced Copy Function, Online Data Migration, Thin Provisioning Function, De-duplication, Data Compression, Automated Tiering (Flexible tier), Performance tuning, RAID migration, Logical Device Expansion(LDE), Quality of Service, Role based access control(Prevents use of corrupted data and improves data reliability of database)The Storage system should support minimum 8 x front-end ports (Mix of FC-8Gbps, 16Gbps, iSCSI-1&10Gbps, FCoE). Should be supplied with at least 4*1GB Ports per controller, out of which 1 port of 1GB iSCSI Port should be dedicated for ReplicationThe array should support 1000TB space and following spindles: 450GB, 600GB 900GB 1.2TB and 1.8TB or above; 10K/15K RPM 6G/12G SAS disks and 1TB, 2TB, 3TB and 7200 RPM, 6Gbps NL SAS. It should support SAS based SSD drives. Mix and match of different type of spindles should be supported behind the same pair of controllers. It should also support 2.5 inch drives.Entire system must be manageable from a web-based single, secure interface. Management system must include comprehensive online and remote monitoring abilities without third party hardware or software. Should provide centralized monitoring software for Storages and Servers. Provide detailed reporting software which provides the visibility to Performance, utilization, Health monitoring, SLA, forecasting and policies like an SRM Software.Firmware should be upgradeable for functionality improvement and enhancements. Must support non-disruptive upgrade of core software, BIOS, snapshot, clone, remote mirroring and management software without shutting down the storage system. All host-attached servers must remain fully operational during system level or maintenance upgrade procedures. Upgrade should be in terms of adding disk without replacing the proposed controllersThe array should be scalable to a minimum of 140 + disks and Max no of 24 drive enclosuresBoot from SAN - Allow diskless servers to share storage resources and boot from the SAN.The array should allow scalability to 2048 LUNS.Required 10TB RAW space of SAS (1.2TB 2.5" Hard Drive) support online expansion of volumes. Must be able to add additional disks on the fly to expand the RAID group capacity. The array should support online LUN migration (transparent movement of volumes within the array). The functionality should allow cross RAID migration and cross spindle migration (e.g. 600GB SAS to NL-SAS). Intelligently restripe data as disks are added to optimize performance.System should have capability to designate multiple global hot spares that can automatically be used to replace a failed drive anywhere in the system. Storage System to have separate Hot-spares for SAS and NL-SAS as per the system architecture requirement.Minimum 3 (Three) Years On-site comprehensive warranty back by manufacture.The SAN must support synchronous, asynchronous replication must support local and remote replication. Further, the replication must be bi-directional to support multiple replication options. Also Storage should support cascaded replication.Industry leading Operating System platforms including: Windows Server? 2003, Windows Server? 2008, Windows 2012, Sun Solaris?, HP-UX?, IBM-AIX?, Linux? 2.6 and above, RHEL-5?, VMware?, Hyper-V?.Must support various Hardware RAID levels such as 0, 1, 10, 5, 50 and 6 (Dual Parity Protection). Must support inter-mixing different RAID groups within one storage system. Different type of RAID levels should co-exist within the same array simultaneously to match different protection requirements of data.Total disc layout with quantity installed and RAID configuration must be clearly mentionedHardware principle support & hands on training for minimum three days.Security Equipment1IP Cameras3 Megapixel HD Dahua/Hikvision/CP Plus or equivalent122IP Cameras12 Megapixel Ultra HD Network Bullet Camera53IP Cameras5 Megapixel HD Dahua/Hikvision/CP Plus or equivalent204CamerasHD1265DVR16 Chanel Dahua/Hikvision/CP Plus or equivalent86Hard Drive2 TB Seagate Enterprise Hard Disk or equivalent97LED40 Inch Samsung or equivalent98Switch Cabinet6 U119Wiring CostWiring Cost 14 DVR & 126 Cameras12610UPS1.5 KVA with 150 x2 AMP Gel Battery Bank (APC or equivalent)1.5 KVA with 150 AMP Gel Battery Bank (APC or equivalent)1111NVR32 Ch. H.264 4K Super Network Video Recorder Up to 32 channel IP camera input Up to 12Mp resolution preview and playback Max 384Mbps incoming bandwidth Support 8 SATA HDDs up to 48TB, 4 USB(2 USB3.0), 1 eSATA port Support iSCSI to expand storage space 2 HDMI / 1 VGA simultaneous video output Support Multi-brand network cameras Support RAID 0/1/5/6/10/50/60 ONVIF Version 2.4 conformance Mobile Software: iCMOB, gCMOB, wCMOB 112LED Search LightLED search Lights for Cameras813HousingOutdoor housings for IP cameras3514Cameras PoleCamera Poles415AngleAngle for cameras Installation2016Optical FiberSingle mode 1 KM1000 m17Patch CordsSingle Mode( LC to LC = 4, LC to SC = 4)1018UTP Cat 6Cat 6 Molex, 3-M or equivalent419Hard Drive4 TB Hard drive for NVR8Attendance Management System1Biometric Attendance System (Finger, Face and Mifare card)Solution for 8 buildings with centralized management and reporting2Mifare card reader2Cards for Datacard CD 8001AJK DL Card, Customized Design?250002Color Ribbon, YMCK-K ?503DuraGard Holographic Lamination, 0.6 mil, Generic Design "Secure Globe" ???????504Durashield Holographic Lamination, Generic Design??????10Skype Video Conferencing Equipment1Cam and Mic (Logitech or equivalent)Conference cam and mic103Barrier1Vehicle Access Control System (VACS):ESTEE UHF Long Range RFID Reader ES-L-10Up to 12mtrs scanning range, RS232-485 interface with complete software integrated with Boom Barriers022ESTEE Electronic Boom Barrier (14 feet)with Remote Control and fitting charges053RF Tag stickers / RFID Card for Vehicle7004Signal Light (Red and Green) with pole and installation25ESTEE 5MP IR IP Camera ES-IP 705M Day / Night5Megapixels, 2536P Full HD, 0 Lux with 5 ports Network Switch, Wiring and Installation26Photo Sensor for Emergency stop and pull back27CAT-6 Network Cable, power cable, Ducting, Piping,Road Cut with back filling in same position, civil work, testing, commissioning, training and installation charges18Dell Core –i5 Branded Computer with 19” LED Display 104Sound SystemAuditorium (speakers complete set with training / key solution 6 Table Mic, 2 Cordless Mic)Classroom (2 Speakers complete set with turnkey solution)Classroom (4 Speakers complete set with turnkey solution)-05Lab. Equipment (Separate quotation is required for each department)ADepartment of Computer System Engineering for detail (Ph. No 05827960037)External Hard drives (Transcend or Equivalent)2 TB, Shock Proof03IiRJ-45 ConnectorCat 6 original AMP/ DLINK or equivalent500IiiCrimping Tool05IvCable Tester05BQuotation For Zoology DepartmentDepartment of Zoology for detail(05827961112, Email: zoologymust@)IMicropippet Gilson pippetman Gilson maximum possible Errors ISO-8655 Possible ErrorsModel: Ordering Reference: Volume : Systematic Error Random Error Systematic Error Random Err (?l) (?l) (?l) (?l) (?l) P2 F144801 0.2 ±0.024 ≤ 0.012 ±0.08 ≤ 0.04 0.5 ±0.025 ≤ 0.012 ±0.08 ≤ 0.04 2 ±0.030 ≤ 0.014 ±0.08 ≤ 0.04 P10 F144802 1 ±0.025 ≤ 0.012 ±0.12 ≤ 0.08 5 ±0.075 ≤ 0.030 ±0.12 ≤ 0.08 10 ±0.100 ≤ 0.040 ±0.12 ≤ 0.08 P20 F12360 2 ±0.10 ≤ 0.03 ±0.20 ≤ 0.10 5 ±0.10 ≤ 0.03 ±0.20 ≤ 0.10 10 ±0.10 ≤ 0.005 ±0.20 ≤ 0.10 20 ±0.20 ≤ 0.06 ±0.20 ≤ 0.10 P100 F123615 20 ±0.35 ≤ 0.10 ±0.80 ≤ 0.30 50 ±0.40 ≤ 0.12 ±0.80 ≤ 0.30 100 ±0.80 ≤ 0.15 ±0.80 ≤ 0.30 P200 F123601 50 ±0.50 ≤ 0.20 ±1.60 ≤ 0.60 100 ±0.80 ≤ 0.25 ±1.60 ≤ 0.60 200 ±1.60 ≤ 0.30 ±1.60 ≤ 0.60 P1000 F123602 200 ±3 ≤ 0.6 ±8 ≤ 3.0 500 ±4 ≤ 1.0 ±8 ≤ 3.0 1000 ±8 ≤ 1.5 ±8 ≤ 3.0 01IiControl Shaking IncubatorSpecificationMovement Type:OrbitalOrbit:20 mmMax. Shaking Weight:20 kgMotor Rating Input:82 WMotor Rating Output:24 WMax. ON Time:100 %Min. Speed:10 rpmSpeed Range:10 - 500 rpmSpeed Display:LEDTimer:YesTimer Display:7 segment LEDTime Setting Range:1 - 59940 minOperating Mode:Timer / ContinuousTouch Function:NoShaking Table Lock:NoMicroplate?Compatible:NoHeating Temp. Range:Room Temp. +5° - 80 °CHeat Output:1000 WTemp. Display:YesTemp. Stability:0.1 ±KTotal Volume:90 LHeight with Open Hood:875 mmDimensions:22.8 x? 29.5 x 20.7 in.(w x d x h)580 x 750 x 525 mmWeight:110 lbs / 50 kgPermissible Ambient Temp.:15 - 32 °CPermissible?Rel. Humidity:80 %Protection Class (DIN EN 60529):IP 30RS 232 Interface:YesVoltage:230 / 115 / 100 VFrequency:50/60 HzPower Input:1120 W01IiiScreen Master 3000, Biochemical SystemsMODEL Screen Master 3000, REAGENTS USED Liquid, POWER NEEDED, VAC (ENERGY) 120, 200, Watts (GENERATOR) 50, DIMENSIONS (HXWXD) CM, (IN) (DISPLAY) 40 x 40 x 17 (15.7 x 15.7 x 6.7), WEIGHT, kg (lb) (DISPLAY) 13 (28.7), TECHNIQUE Photometry, Incubator Yes, CONFIGURATION Integral 25°C to 37°C, Tube capacity (TEST CAPABILITY) 10, SAMPLE REQUIREMENTS, Whole blood, plasma, serum, Size/range, ??l (SAMPLE) From 501IvRefrigerated CentrifugeEppendorf Microcentrifuge 5418 R (Refrigerated), With Rooterincludes aerosol-tight QuickLock Rotor FA-45-18-11 and lid, 230 V/50 Hz01VZ338818?SIGMAMidi horizontal electrophoresis unitncludes base unit, safety lid, one standard casting tray for 13 × 15 cm gels, and two combs (1.0 mm × 12 sample wells and 1.0 mm × 16 sample wells).01ViSpectroquant? Pharo 100 For measurements in the VIS rangeSpectroquant? Spectrophotometer Pharo 100 320 –1100 nm 1.00706.000101ViiThe Vi-CELL? Cell Counter Beckman Coulter Life SciencesUNSPSC: 41116015, Analysis Time: <2.5min, Capacity: 12 position carousel via autoloader, Concentration Range: 5 x 10^4 to 1 x 10^7 cells/mL, Counting Accuracy: ± 6%, Depth: 41 cm (16 in), Digitilizing Resolution: 1394 x 1040, Height: 44.5 cm (17.5 in), Imaging Technology: Auto-focus CCD array, Firewire camera, Instrument Type: Video image through a quartz flow cell, Operating System: Windows 7, Overall Analysis Range: Size Range:?2 ?m - 70 ?m, Power Requirements: 100V, 120V, 220V, or 240V 50/60 Hz, 50 W (65 W max.), Sample Volume: 0.5 mL, Temperature: 10°C to 40°C (50°F to 104°F), Viability Range: 0 to 100%, Weight: 11.3 kg (25 lb), Width: 38 cm (15 in.01viiiDigital CameraNikon Model D520024 Megapixel24.1 Megapixel DX-format CMOS image sensor for exceptional image quality3.0-inch 921,000-dot Vari-angle LCD display that swivels to nearly any positionBuilt-in HDR (high dynamic range) and pro-quality special effects and filtersSerious video capabilities: Full HD (1080p) recording at 30p, 25p, 24p and 60i, plus an ultra-high quality built-in stereo microphoneWi-Fi photo sharing and camera control with the optional WU-1a Wireless Adapter01ixGPS DigitalGPS unit:?Garmin?GPS16 or Equivalent receiver (Navigation: )CPU: (OS: ), Flash: (external: )GPS: 12 channels, ( WAAS;EGNOS, yes )Display: , Connectivity:Internal: Batteries:01XThermal Cycler PCRSimpliAmp Tm Thermal Cycler Specification Block Format: 96-Well , .2 ml Veriflex blocks PCR VOL Range : 10-100 micro litterReaction Speed : . enable to run fast Chemistry .Controllableramp rateProgramfeatures: overwrite protection .Auto restart after power outages .Edit Programs during experiments .One Touch incubation Veriflex Tm Blocks . Sported 10 o C (5oC Zone to Zone) Settable 20 oC ( 10oC Zone to Zone) 3 veriflex ZoneTemperature Accuracy: + 0.25 oC ( 35 -99.9 0C)Veriflax Block ramp rate: 3.5oC Per Second)Veriflax sample ramp rate: 1.90oC Per Second Temperature Range: 0 -100 oC Temperature Uniformity: 0.5 oC 01CQuotation For Physics DepartmentDepartment of Physics for detail ( phone No. 05827961111 ) IUltrasonic Cleaning Bath with Lid (Model: E60H, Elma Made in Germany or Equivalent)Temperature-controlled ultrasonic operation: Splashwater-proof operating panel, Temperature setting between 30 C°, and 80C°, variable in 5 C°, steps. Automatic switch-off after 12 h operation to prevent unintended permanent operation.Technical Specifications: Tank max.(litre) = 5.75 ,Tank internal dimensions = 300x 151x 150mm,Ultrasound frequency (kHz) = 37 , Mains voltage variants (Vac) = 220 01IiVaccum PenVacuum Pen: SMT-150C (NEW)-EQ-SMT-150C MTI USA or Equivalent01IiiDiamond ScriberDiamond Scriber for Cutting Single Crystal Substrate - DS-01-LD MTI USA5.7" (145mm) long, provided with clip01IvUVO CleanerUVO Cleaner, Model: 342 or Equivalent, Tray dimmensions in inches: 6.75 x 6.5 x 4" 01VCorning EAGLE XGCorning EAGLE XG wafer 50.8mm dia x 0.5mm, 2 sp surface quality 60/40 : MTI USA25vi (a)Compact Hydraulic Pellet Press (YLJ-15 or Equivalent)Pressure: Approximately 15 metric ton, Pressure Guage is built in, Max Lifting Height of Bottom Cylinder: Approx 13 mm, Top support screw Audjstable height: Approx 205 mm, Protection Cover included, 01vi (b)Press Die: One set of 10 mm Diameter Dry Pellet Pressing Die (EQ-Die-10D or Equivalent) Height:- Steel Sleeve: 2" (50.8mm),Support Plates: 1/2" (12.7mm),Opened Steel Cylinder: 1 1/3" (33.87mm),Press Pole: 1 5/8" (15.88mm), Push Rods: 1 19/32" (40.48mm); 1/2" (12.7mm).Diameter:- Steel Sleeve: 1 15/32" (37.3mm), Support Plates: 1 1/2" (38.1mm), Opened Steel Cylinder: 1 1/32" (26.19mm), Press Pole: 13/16"; 13/32" (20.64mm; 10.32mm), Push Rods: 13/32" (10.32mm).01ViiLaser-Induced Breakdown Spectroscopy LIBS2500plus made in USA:The broadband, high-resolution instrument allows for spectral analysis from 200-980 nm, with resolution of ~0.01 nm (FWHM). Sensitivity has been reported to parts-per-billion and picogram levels. The LIBS 2500plus consists of 1 to 7 spectrometer channels and operates with any 32-bit, USB compatible Windows PC. 01viiiOptics CompartmentsBeam ExpenderBeam LifterRotational StageQuartz BeakerMagnetic Mount for Laser01IxVacuum SystemRotary Pump Diffusion Pump01XLaser Energy Meterwith sensor of different range01DQuotation For Botany DepartmentDepartment of Botany For detail Ph: 05828-920235 1Clinometers-12Range finder-13Soil testing kits-14Tree Calipers-15Tree corers-16Tree ring measuring table and software-17Hand magnifiers-18Ozone detector-19Vacuum pump Two –Stage diaphragm pump made from chemically resistant materials, High Suction capacity 1.7 m3/h. The vacuum pump should achieve an ultimate vacuum of 7 mbar. Suction capacity for up to 3 Rotary evaporators at the same time.1EQuotation For Mechanical Engineering DepartmentDepartment of Mechanical Engineering for detail (05827960036, E. info@must.edu.pk)AMechanics of Materials Lab.IPhoto-elastic Demonstration ApparatusDescription: Photo-elastic experiments with an overhead polariscopic.Polarizer and analyzer each comprising a polarization filter and quarter wave filter.Filter enclosed, with stress-free glazing. All filters rotatable in any direction on the horizontal plane.?Plane or circular polarized light possible.Green filter for monochromatic light.?Load application device with force gauge for compressive and tensile loading.8 different polycarbonate (PC) models suppliedBox to house the componentsGeneration of planar stress states in various models under load??* compressive load??* tensile loadInvestigation of distribution of stresses with plane or circular polarized light.Interpretation of photo elastic fringe patterns.??*distribution of stress??* stress concentration.01IiSet of strain gauges with calibrationsystemDescription: 1. Complete set of components for application of strain gauges.2. Strain gauges with single measuring grids, parallel measuring grids and measuring grids at 90° / 45° angle.3. Strain gauges for steel or aluminum components.4. All necessary tools, adhesives and other aids included in the set.5. Lockable carrying case.6. Learning package with text book, exercise script and video.7. Cable and connectors?to connect the applied strain gauges to the optional available?measurement amplifier.Experimental capabilitiesFundamentals of electrical?resistance strain gaugesPreparation of the measuring pointSelection of a suitable strain gaugeAttaching, wiring up and configuring strain gauges?on mechanically stressed components.Protection of the strain gauge measuring point?against external influences.Interpretation of measured values (theoretical)01BEngineering Statics Lab.ICentre of Gravity ApparatusDescription:The center of gravity of a shape of uniform thickness can easily be found by this method. It provides a simple technique for complicated shapes, far quicker than by using calculus for example, although not producing an accurate answer to the handling of a yacht, the calculation of the moments caused by the wind and water acting at the center of lateral area' of the sails and keel are still used as a starting point.A free standing backboard has a pin from which a selection of flat shapes can be hung. A simple pendulum suspended from the pin enables the line of action of the weight to be transferred to the lamina. The center of gravity is the position on the shape where two or more such lines intersect.To demonstrate how the center of gravity for different objects are measured.01ii.Apparatus for Statics experimentsDescription:The unit allows the fundamentals of Statics, such as equilibrium, force resolution, the principles of levers, and similar issues to be clearly demonstrated.The base unit is a freestanding mounting board. All the parts necessary for the experiment can be quickly attached to the rails that are attached to the edge of the boardExperiment bench top apparatus for demonstrating the fundamentals of simple planar systems of forces.To be supplied with vertical mounting panel and pen.To cover topics as follows: Equilibrium of forces, addition and resolution of forces with force parallelogram, principles of levers, moment and moment equilibrium, forces in supports.Two weights set suppliedIndividual components to be stored in portable caseAll spares and accessories suppliedComprehensive instruction manual.2 year warranty Addition and resolution of forces with force parallelogramForce equilibriumPrinciples of levers, moment and moment equilibriumForces in supports01CHeat & Mass Transfer LabIPlate Heat ExchangerDescription:Multiple brazed stainless steel plates arranged for multi-pass operation with passes in series give heat transfer. Four thermocouples measure hot and cold fluid entry and exit temperatures.Self-sealing quick release connections enable rapid connection to the?console?and conversion from parallel to counter-current flow. An extended version with intermediate measuring points and thermocouples is available as console.Demonstration of indirect heating or cooling by transfer of heat from one fluid stream to another when separated by a solid wall.Conducting an energy balance across plate exchanger and calculate the overall efficiency at different fluid flow rates.To demonstrate the differences between counter-current flow and co-current flows and the effect on heat transfer, temperature efficiencies and temperature profiles through a plate?heat exchanger.?To determine the overall heat transfer coefficient for a plate heat exchanger using the logarithmic mean temperature difference for counter-current and co-current flows.?To investigate the effect of changes in hot fluid and cold fluid flow rate on the temperature efficiencies and overall heat transfer coefficient.To investigate the effect of driving force (difference between hot stream and cold stream temperature) with counter-current and co-current flow.01IiThermal Conductivity meterDescription:Thermal conductivity, thermal diffusivity and specific heat capacity define a material’s ability to store and transfer heat. The precise and accurate measurement of these properties is critical for any process or material, which experiences a large or fast temperature gradient, or for which the tolerance for temperature change is exacting.Accurate values of these properties are essential for modeling and managing heat, whether the component of interest is called on to insulate, conduct, or simply withstand temperature changes. Information about these properties are routinely used in heat transfer models of all complexities. Thermo-physical property measurements also reflect important information about material composition, purity and structure, as well as secondary performance characteristics such as tolerance to thermal shock.This Instrument provides the most extensive and comprehensive range of instruments for the precise and accurate measurement of heat transfer properties of a wide range of material types and temperatures.Heat Flow Meters DTC Series and Fox Series provide the solution to a highly diverse set of testing needs for the direct measurement of thermal conductivity of low to medium conductivity materials.01IiiWeather Station UnitWeather station should measure and record the half hourly data of the following weather parameters,Ambient Temperature (°C)Relative Humidity ()Solar Radiation (W/m?)Wind Speed (m/s)It should record and display this data on a desktop through an interface.01DEngineering Dynamics Lab.IAcceleration ApparatusDescription:It demonstrates a force causes a mass to accelerate and hence verifies the relationship of acceleration and force. Determines the acceleration due to gravity and confirms Newton's Second Law of Motion.The unit consists of a trolley gliding on two rails attached to the base, trolley has removable masses. Acceleration is indicated by spark generator on an electro-sensitive paper strip. Weights and weight hanger provided.Instruction manual.1 Roll of spark sensitive paper.Tape measured supply.To show that a force causes a mass to accelerate, and that the acceleration is proportional to the force.To compare experimental and theoretical values of forces required to accelerate a given mass.To determine the acceleration due to gravity.0404IiConservation of Angular Momentum ApparatusDescription:Bench top apparatus for clearly demonstrating the basic concepts of conservation of angular momentum. To comprise of a bench mounted vertical board with a rotating arm, and two sliding weightsThe weights can be moved radially along the rotating arm by a cord. The arm is spun manuallyComprehensive technical manualUsed for demonstration only, no measurements are intended.Demonstrates basic concepts of conservation of angular momentum through visual observation.The experiment is designed to reinforce the general principle that the work done, particularly by a variable force, can be determined simply by measuring the area under the graph of force and distance moved.01IiiWork Done by a Variable Force (Tangential Effort) ApparatusDescription:Bench mountedReinforces concepts of work and energyDirect reading of tangential effortBack board with protractor for angular measurementPivoting lever with hanger and spring balance at one endSpring balance attached at 90° Instruction manual suppliedTo obtain the experimental relationship between effort and distance moved by effort, and to compare with a theoretical prediction.To show that the work done is the area under a graph of load against distance moved.This bench top unit gives excellent visual demonstration to the Coriolis force on a jet of water.A horizontal boom sits on top of the main base unit and rotates in a horizontal plane. Attached to the boom is a water tank which projects a jet of water in to the tank. The jet is directed towards the center of rotation of the boom.01IvCarioles Force ApparatusDescription:Coriolis force visually demonstrated.Water tank and jet rotated on boom.Deflection of jet observed for varying rotational speed of boom.Electronic control of boom via speed control knob.Speed of water jet displayed.Bench top base unit with adjustable feetProtective dome covers rotating parts.To observe the Carioles Force on a jet of water being rotated in a horizontal planeEffect of jet deflection as a function of boom, rotational speed and the direction.EMechanics of Machines LabIWorm and Wheel (30 : 1)Description:EFFORT hanger and LOAD' HangerWall mountedEffort pulleyLoad pulleyWorm and Wheel.To mount at certain height above floor level.Weights set Comprehensive instruction manual provided2 year warrantyExperimental determination of velocity ratio and comparison with calculated valueDetermination of EFFORT with variation of loadDetermination of friction with variation of loadDetermination of efficiency with variation of loadDetermination of limiting efficiency of the machine01IiAckermann SteeringApparatusDescription:Variable length track rodsProtractors for stub angle displacementKing pin spacing.Steering lock angle, scale graduations. Split track rod length adjustable.Steering rod made of aluminum and steel, prehensive instruction manual provided.2 year warranty.To demonstrate how the Ackerman angles are determined for a steering system.To determine variations in toe-out on turns caused by track mal-adjustment.To determine variations in toe-out on turns caused by accident damage.01IiiUniversal Drive ModuleDescriptive: load cellSpeed controllerAC MotorTachometer displayForce displayComprehensive instruction manual provided2 year warrantyIntroduction?to drive systemCalculations involving?torque, moment, speed and power01FWorkshop Practice & Manufacturing Process LabUniversal Wood Cutting MachineDescription:Description:Sliding table make easy Angular and Cross cut.Arbour tilt at different degree Saw blades of high quality.Heavy duty wood cutting machine with 5HP.Dust collector port.To demonstrate the different wood working operations.To cut the wood in different sizes for wood working joints.GTechnical Software CAD-II LabISoftwarePro E5.001IiSoftwareAnsys 16.201IiiSoftwareAuto CAD 2016 full version01IvSoftwareSolid Works 201601FQuotation For Department of Electrical Engineering (For detail Contact 05827-960099)IFire Extinguisher for labsDCP Type, 6 kg10IiRobotic Arm with Conveyer BeltTX90L01IiiLinear two state inverted Pendulum-01IvSpectrum Analyzer (Rohde & Schward)R&S fsw85 (Rohde & Schward)05VNetwork Analyzer (Rohde & Schward)R&S zva 24 (Rohde & Schward)02ViData Acquisition System /Data Logger32 channel, Inputs: Voltage, Current, Temperature, Humidity and Logic, Serial Sensor, PC connection: Ethernet & RS232, Data transfer: PCMICA Flash Card or direct to PC, Software: Software included01ViiUSRP N 210N 21003viiiRaspberry Pi (B+) kit, webcamNew Rasberry Pi Model B+ Texas Instruments10IxDSK (TMS320C6713), Webcam, HeadphonesTMS320C671310XFinger ScannerC500005XiSBR (Spectral Band Replication)14496-3:300905GQuotation For Department of Mirpur Institute of Technology (For detail Contact 05827-961062)01Power Clamp MeterUT 232, Digital Clamp watt meter, KW, KVA, KVAR, 1000 AMP.1002Digital Logic Trainer (CMOS) / Logic Trainer BoardOutput D.C Voltage: Fixed 5v, Variable 0 to ±18 V Output Current: 1 Amp Load Regulation: ±1% of the Highest Specified Output Voltage. (No Load to Full Load) Ripple and Noise : Less Than 2 Mv Variable Clock Frequency : 1 Hz to 1 Mhz by Three Frequency Range & Multiplier Logic Inputs : 16 Switches for High/Low Output Indicators : 16, 5 Mm Bright Red LEDs Seven Segment Display : 4 Digit Seven Segment Display with Decoder Driver Digital Voltmeter : Digital Dc Volta meter Range 0 - 20v Operating Conditions : 0 to 40°c and 95% R.h. at 40°c 0503Analog OscilloscopeModel: GOS 620 OR Equivalent0504AC Ampere Meter Multi Range AC /DCModel: MS-401 or Equivalent0505Digital AC/DC Clamp Meter (Auto Range)Model: MS 2101 or Equivalent0406Function GeneratorModel: MPF 2020 OR Equivalent0507Analog & Digital TrainerModel: M21-7000 or Equivalent05HQuotation For Department of Civil Engineering (For detail Contact 05827-961047) ACement and Concrete Testing Laboratory1Cylinder mould 6” diaLocal made from MS Pipe2023 gang mold for 40x40x160 mm mortar specimensLocal Mild steel corrosion resistant material groove cut on outer side plates for fitting filling guide103Temperature Controlled curing tankOrigin Western EuropeHeavy Plastic body with metal base specimen support grid. Thermostatic digital heating system. Plastic cover included. Capacity 650 liters robust design for efficient placing cylinders and cubes specimens034Concrete Mixer MachineLocalQuarter bag capacity Electric motorized for Laboratory use015Fork LiftDouble Mast capacity 1.5 Ton suitable for handling medium size beam and column specimens in lab016Manual Triple Beam BalanceOrigin Western Europe,USAHeavy Duty Triple Beam Balance Minimum 1g and max 100 kg fitted with wooden Box for safe operation along with calibration certificate027Tool BoxIncludes Different tools like Wrench set, Ratchet set, Spanner set, L keys set, Screw Driver set etc028First Aid BoxGeneral Purpose first aid box029Heavy Duty TrolleyLocal for carrying concrete samples open platform type. Dimension 2’×5’. Load carrying capacity 200kg. Fitted with rubber tyres mounted on bearings.0310Pan MixerEasily removable with trolly, Mixing pan with 1100 `mm diameter and 400 mm deep power supply 230 V , 1 ph 50 Hz 2 hp Weight 420 kgTrolly for fast and easy removal of the mixing pan of the multi flow mixerSecurity cabinet manufacture from steel sheet conforming to CE safety DirectivesPan capacity : 300 liters, Yield 220 lit/mix, motor power, 5.5 kW01BGeotechnical Engineering Laboratory1Apparatus for Measuring Suction Coefficient of Soils (ASTM D5298.31794)Aluminium cup dia 75x50 mm with cover. Set of 6Heavy plastic sample bag 40x70 cmElectronic analytical balance 210 g cap. 0,1 mg, sensitivity. 110-230V/50-60Hz/1Ph.Forced convection laboratory oven with digital, thermo-regulator and 2 shelves. 250 l capacity. 220-240V/50-60Hz/1PhLaboratory thermometer 0 + 50°CDesiccators 210 mm diaSilica gel with indicator. 1000 g8100111112Direct / Residual Shear Apparatus (ASTM D-3080/ AASHTO T236)Speed Range: adjustable from .00001 to 4.999999 mm/min; Max Shear Force: 5000 N, Max. Vertical Load 500 N / 5000 N (10:1) Liver Loading; Speed Drive Ratio: stepper motor 1/10,000; Horizontal Travel: up 19 mm; Digital Display to be operated via membrane keyboard. Dimensions: 953 x 387 x 1180 mm; weight 100-150 kg including all the accessories for loading and data processing.Shear Box Assembly square / circular Area Sq. 60 -100 Square mm ; Dia 60-100 mmLoading Pad, Retaining Plate , Porous Plate, Perforated Grid , Samplew cutter, Extrusion Dolly,60-100 sq mm and 60-100 mm dia Slotted Steel weights etc.Valve Pannel for Use with Deairing Tank1SetSet23Sample Pre5parator for Sand to be used in Triaxial TestingSample Preparotor for reconstituted soil / sand sample to be used in tri-axial test imported from M.S Control, ELE or equivalent manufacturer for Geotechnical Equipment.24Undisturbed Soil Samples from BoreholeThin Walled, Denison, Pitcher and piston samplers for soils 05 each.155TrainingForeign Training of two engineers from MUST at the source of Equipment Manufacturer.L.SCHighway Lab Equipment01Isomantle HeaterCompatible with controls laboratory mixer model for 16-B0075/B0102Water BathCapacity 28 liters compatible with standards, EN12697-34, ASTMD1559,D5581, AASHTO T2450103Flash and Fire pointOrigin Western Europe Automatic. Cleveland flash tester compatible with standards EN22592, ASTM D92, AASHTO T480104Melting Pot for heating Bitumen5 liters capacity. Suitable for heating bitumen in laboratory, environment friendly and safe in operation01DFluid Mechanics & Hydrology lab1ROTATIONAL VISCOMETER (Imported)01Model: NDJ-8SRotation Speed (RPM): 0.3,0.6,1.5,3,6,12,30,60Number of Spindle: 4types(#0 spindle is for option)Measurement Accuracy: ±1.0%(FS)Repeatability: ±0.5%Power: The adapter is the standard supply(input 220V±10%?50±1Hz)Rotor optional parts?(test range): 1~20002BASIC HYDROLOGY APPARATUS (Imported)01Tank: Stainless steel 100 cm wide x 200 cm long x 19 cm high.Inclination: 0-3%End compartments: 2 ea with stainless steel mesh partition.Wells: 2 ea with stainless steel mesh sleeve.Spray nozzles: 8 nozzles with separate shutoff valves.Pump: 0.37 kWFlow measurement:Rain water: Variable area flow meter, upto 35 lpm.Run off: Calibrated weir.Manometer: 20 tubes x 200 mm x 1 mm graduation.Upper walls: Clear acrylic.Accessories:Rectangular ringCircular ringConfined aquiferCylindrical pierPower supply: 220 V, 1 Ph, 50 Hz.3IMPACT OF A JET APPARARUS (Imported)01Target plates: Flat, 30o,45o & 120o inward cone, 180o hemisphere, 120o outward conesJet diameter: 5mm, 8mm & 10mmWeight: 8-10 kgAlong with all accessories (inflow, outflow pipes, different weights etc)4OSBORNE REYNOLD NUMBER APPARATUS (Imported)01Net (unpacked) shipping dimensions WxLxH : 36 x 35 x 120 cm Net weight : Approx. 10 kgLength of test pipe: Over 700 mm Glass Dye reservoir: 1 ea. Measuring cup: 1 ea.Floor standing apparatus to produce classic Osborne Reynolds' experiments.Fluid enters a vertically mounted test section through a carefully profiled bell mouth from a constant head tank.An easily cleaned dye injection system is incorporated.Fluid flow is controlled by a needle point globe valve.Supply includes stilling bed, hoses and dye.Clear acrylic tank covering observation tube.5Hydraulics Bench (Imported)01Mobile, floor standing service unit for fluid mechanics apparatusBase constructed from robust, corrosion resistant plastic moldingTop constructed from glass reinforced plasticSump tank capacity 250 litresVolumetric flow measurement via remote sight gauge Stepped tank for low and high flow rates. Capacities 0-6 and 0-40 litresOpen channel in bench top with quick release outlet fittingSelf Priming centrifugal circulating pump provides water at 21m head at no flow, and a maximum flow of 60 litres per minute6Hydraulics Bench (Imported)02Mobile, floor standing service unit for fluid mechanics apparatusBase constructed from robust, corrosion resistant plastic moldingTop constructed from glass reinforced plasticSump tank capacity 250 litresVolumetric flow measurement via remote sight gauge Stepped tank for low and high flow rates. Capacities 0-6 and 0-40 litresOpen channel in bench top with quick release outlet fittingPower Supply 0.5 KW7BERNOULLI’S THEOREM APPARATUS (Imported)01Venturi section machined from clear acrylicSeven static pressure tapings plus a total head measurementFlow control valveManometer board with eight tubesQuick release fitting for easy connection to hydraulics benchEducational Software available as an option8Pumping System (Imported)01Dimension Net 1420 x 550 x 1340mmPacked 1.05 meter cubicGross Weight 250kgSpeed range 0 - 3000 Rev. per minuteFlow rate 300 litre per minuteGENERAL TERMS AND CONDITION:Separate bids should be prepared major head/ department wise and name of department / head should be mentioned on each envelope in capital words.On Bid opening only Financial Rates, Model and Country of Origin will be announced.The bidder is required to submit Bid in Single package. ?The bids shall be submitted in a sealed package or packages in such?manner that the contents are fully enclosed and cannot be known until duly opened.?During opening of the tenders, the names of Bidders who have submitted their offers will be read out together with the final quoted total amount as it appears at the time of opening.Bidders may send their bids through courier at given address and at proper time but university takes no responsibility for delay, loss or non-receipt of tender at given address or any other case.Bidders shall submit a signed letter with Official stamp affixed on it as per the format given in Form I as a cover letter to the Bid/Proposal. Bids/Proposals submitted without this cover letter may not be accepted and bids will likely to be rejected straightaway.Bidders shall provide Company profile, Authorization & relationship with principal firm(s), location of branch offices, company experience in related field, technical staff details (branch-vise), project completed, major clients' list. NTN –GST and Registration under companies’ ordinance 1984 if applicable.Equipment's technical details (brochures, data sheets etc.) mentioning compliance and properly highlighting all the compliance specification as requested/ Exceeded using florescent highlighter of quoted hardware/equipment and material with their make, model, part number, etc.Bidders are required to fill and sign all pages of submitted proposal, and submit it as Financial Proposal. Bidders are required to submit their financial proposals in PAK Rupees (PKR) on FOR Basis and may also quote C&F prices with all clear terms and conditions.Each quoted item in bid will be labeled separately.Rates quoted in the Bid should be containing all the applicable taxes.University reserves the right to reject any or all tenders with recorded reason.University also reserves the right not to accept the lowest rates quoted by the tenders, university will evaluate and award contract or place purchase order at “whole life cost” bases.Bidders are requested to visit the site, if they feel it is necessary to do so.Bids submitted via email or fax will not be entertained.BID EVALUATION CRITERIA:All items included in tender document shall be evaluated individually but for departmental purchases preference will be given to those suppliers/firms who have submitted complete items for any department.All bids shall be evaluated on following criteria; 30% bids evaluate financially while 70% bids shall be evaluated on technical grounds. 70% weight will be given to technical specifications of the each product while remaining 30% weight will be given to suppliers technical skills, relevant experience, financial position and authorized certificates etc.Bidder is bound to provide GST & Income tax certificates with proof of “Filer”. Bidders also bound to Provide Company Registration Certificate if Claim being registered under Company ordinance/Act 1984.The bedding documents are and shall remain the exclusive property of the university without any right of the bidder to use them for any purpose except bidding and for use by successful bidder with reference to the work.The details as called for in the bidding documents shall be filled and completed by the bidders in all respect and shall be submitted with requisite information.All bids shall be written in English.The complete bid shall be signed by the bidder on each page.Bidders are strictly restricted to quote optional items.Bidders shall clearly indicate their legal constitution and the person signing the bid shall state his capacity as also the source of his ability to bind the bidder.Bids must be submitted by the time and date mentioned in schedule covered in the notice inviting tender.The bids shall be signed by a person legally authorized to enter into commitment on behalf of the bidder.In case of services delay or unsatisfactory service delivery /non-complying the terms & conditions CDR will be forfeited.BID ACCEPTANCE:All Bidders who submit their tenders shall also submit a letter confirming their having read all the conditions of the Tender Document and that they accept them in total. This letter shall be provided on the respective letter heads of the bidders along with their correct and complete address, the name of the signatory and his/ her designation in the organization.Bidders shall submit a signed letter with Official stamp affixed on it as per the format given in Form I as a cover letter to the Bid/Proposal. Bids/Proposals submitted without this cover letter may not be accepted and bids will likely to be rejected straightaway.BIDS REJECTION:Any bid not accompanied by an acceptable Bid Security shall be rejected by the MUST as non-responsive firm.If firm could not provide tender fee on time, firm will be declared non responsive.If firm could not submit bid in prescribed manner, bid should be rejected.Conditional bids shall also be rejected.If firm quoted optional items, all such bids shall be rejected.If firm is not registered with Sales and Income Tax Department.Bids are liable to be rejected if; they are not conforming the terms, conditions and specifications stipulated in this Tender Document.EARNEST MONEY/ BID SECURITY:A demand Draft/ CDR equals two 2% of the bid value is required as earnest money in favor of the “Treasurer MUST”.The bid securities of unsuccessful bidders will be returned upon award of contract to the successful bidder or on the expiry of validity of Bid Security whichever is earlier. The Bid Security of the successful bidder will be returned when the bidder after successful delivery of the contract/purchase order.The Bid Security may be forfeited: if bidder withdraws his bid during the period of bid validity; or in the case of a successful bidder, if he fails to delivery as per agreement/ contract/ purchase order.BID VALIDITY:Bid shall remain valid for acceptance for a period of 120 days from the last date of submission of the bid / revised bid any. The bidder shall not be entitled to modify, vary, and revoke his bid during said period; the validity of the bid shall be extended as and when required for the period as requested by the University in writing and agreed to by the bidder under rules.COST OF BIDDING:The bidder shall bear all direct and indirect cost associated with the preparation or delivery/ submission of their bid, participating in discussion etc. including costs and expenses related with visits to the site and university offices. University will in no case be responsible or liable for reimbursement of those costs and expenses regardless of the outcome of the bidding process.REPEAT PURCHASE ORDER:These Rates will be valid for the period whole financial year up to 30-06-2017 and the selected suppliers are bound to supply each repeat purchase order of required items on approved rates during Fiscal Year.PAYMENTS PROCEDURE:No payment shall be made in advance to selected bidder/vendor as mobilization advance.90 percent cost of items shall be payable to the Contractor within one month upon successful installation and inspection of supplied items, 10% withheld amount will be released after one year or completion of warranty period.Taxes will be deducted at source as per government rules at the time of payment irrespective of the date of invoicing.Quantity may be increased/ decreased at the time of agreement/supply order. LIQUIDATED DAMAGES:In case of delay, the Central Purchase Committee, of MUST reserves the right to suggest to Competent Authorities for imposing a penalty not exceeding 10% of the total amount of the contract at the rate of 1% of the bill for each week (cumulative) of delay.If the work is not executed according to the satisfaction of the Competent Authority reserves the right to reject it altogether or impose a penalty not exceeding 50% of the contract amount.In case of services delay or unsatisfactory service delivery /non-complying the terms & conditions CDR will be forfeited.RIGHT TO VARY QUANTITIES :MUST reserves the right at the time of award of Contract/Purchase Order to increase or decrease quantity of goods and services specified in the Schedule of Prices without any change in the unit price or other terms and conditions.CLARIFICATIONSQueries regarding this RFP shall be submitted in writing to: Email, postal address and Telephone of the under sign is given below:dy.treasurer@must.edu.pkProcurement@must.edu.pkMust Secretariat, Sector B-3, Allama Iqbal Road Mirpur AJK.Phone: 05827-961046/ 961040(ext.124)Form 1.PROPOSAL SUBMISSION FORMSecretary Purchase CommitteeMirpur University of Science & Technology, Sir,____________________________________________ We, the undersigned, offer to provide the Services for "Purchase of Items for MUST Office and in accordance with your Request for Proposal (Tender Document) dated _________ and our Proposal. We are hereby submitting our Financial Proposal along with Technical compliance, sealed in envelope.We understand you are not bound to accept any Proposal you receive and reserves the right to accept or reject any offer and to annul the bidding process and reject all proposals without assigning any reason or having to owe any explanation whatsoever.The decision of evaluating committee shall be final and cannot be challenged on any ground at any forum and the evaluating committee will not be liable for any loss or damage to any party acting in reliance thereon.We remain,Yours' sincerelyAuthorized Signature:Name and Title of Signatory: Name of Firm:Address:FORM 2:To be filled by the bidders1. Name of bidders: --------------------------------------------------------------------------------------2. Address: -------------------------------------------------------------------------------------------------3. Phone: ---------------------------------------- Mobile -------------------------------------------------4. Fax No. -------------------------------------- E-mail: --------------------------------------------------5. NIC Tax No. ----------------------------- Sales Tax No.: --------------------------------------------6. Branches (if any): i. ------------------------------------------------------------------------------------ii. ------------------------------------------------------------------------------------------------------------iii. -----------------------------------------------------------------------------------------------------------7. Type of Business: i. -----------------------------------------------------------------------------------ii. ------------------------------------------------------------------------------------------------------------iii. ------------------------------------------------------------------------------------------------------------8. Facilities: i. List of technical staff with qualification and experienceii. Authorization of distribution / dealership ----------------------------------------------------------iii. Any other: ---------------------------------------------------------------------------------------------9. Monthly Turn Over: -----------------------------------------------------------------------------------10. Previous Experience (name of organization where said or like equipment supplied/installed/Commissioned)i. --------------------------------------------------- ii. ------------------------------------------------------iii.-------------------------------------------------- iv.------------------------------------------------------v. --------------------------------------------------- vi. ----------------------------------------------------vii. -------------------------------------------------- viii. --------------------------------------------------Please enclose any supporting documentTotal Bid Value (Rs): _______________ Amount of CDR (Rs):______________________Name and signature: - ------------------------------------- Date: ---------------------------------------“THE END” ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- consolidated credit card payments calculation
- consolidated state performance report
- consolidated credit cards debt
- consolidated lead evaluation and reporting
- columbus consolidated government
- consolidated payment services
- consolidated report of condition instructions
- consolidated laws of new york
- columbus ga consolidated government center
- columbus georgia consolidated government
- consolidated debt
- consolidated loans for bad credit