CoderDojo
CoderDojo – Building objects in MineCraft using JavaScript
Objective
Today we will learn how to create a MineCraft mod. A mod is code you write that allows you to modify MineCraft. A mod can be anything from a new type of block to build with in MineCraft, to a new game that is played in the MineCraft world.
For our mod, we will be creating a function that will build objects in our MineCraft world.
What are all the pieces we need?
• MineCraft: We need MineCraft installed on our laptops. We also need to have a MineCraft account in order to play the game.
• Java: We need to have the latest version of Java installed on your laptop. We use Java to run the MineCraft server.
• MineCraft Server: We need to run a MineCraft server. The server will be running ScriptCraft. ScriptCraft is an extension for MineCraft that allows us to write JavaScript mods. We already created a MineCraft server (called CanaryMod) that has ScriptCraft installed. All we need to do is copy the server to your laptop and run it.
• A code editor: A code editor allows us to type in and save our JavaScript mods. We can use any text editor to write JavaScript mods.
Acknowledgement
The MineCraft server plug-in we use is called ScriptCraft. The plug-in and a lot of the Drone documentation in this document was created by a guy called Walter Higgins. You can find out a lot more about Scriptcraft by following the link below.
Walter also has a book on the subject, available here:
Setup
[pic]
Getting Started Cheat Sheet
Drawing your first block
For more information, see the next section.
1. Run the Server
a. Start the Terminal
b. Type cd Desktop
c. Type cd Canarymod
d. Type ./start.sh
2. Give yourself op permissions
a. Go to the server console window
b. Type op yourminecraftname and press enter, where yourminecraftname is your MineCraft account name.
3. Start MineCraft and connect to the server
a. Run the MineCraft Launcher
b. Make sure your MineCraft profile is set to run MineCraft version 1.8.9. Ask a to help if you are not sure how to do it.
c. Once MineCraft has been launched Select Multiplayer
d. Select Direct Connect
e. Type localhost in the Server Address
f. Click Join Server
4. Build your first block
a. In MineCraft, type / to bring up the MineCraft Console
b. Continue typing /js box(blocks.iron,5,5,5) and press enter
The MineCraft Console
[pic]
Figure 1The MineCraft Console
This is the MineCraft Console. You can reach this by pressing / while in MineCraft. You can do the following things in the MineCraft Console:
- Run your mods by typing: /js mymodname()
- Reload your mods after making a change by typing /js refresh()
- Turn off the rain or snow by typing /toggledownfall
- Set the time of day by typing /time set 9000 (for early morning)
You can also run some of these commands (and others) in the server console window. See the next section to learn about the server consoler window.
Mod Ideas
Here are some ideas you can use for your mod, or come up with your own idea!
Simple House Use a box, a prism, some glass blocks and a door to make a simple house with a roof. (Use Sushi Card 1)
Pyramid Use boxes stacked on top of each other and getting smaller to make a pyramid. Make an entrance and hang some torches inside. (Use Sushi Card 2)
A-MAZE-ing Can you plan a maze on a piece of grid paper? Now can you write some JavaScript to build this maze in MineCraft? Now you can challenge your friends to solve your maze! (Use Sushi Card 3)
Skyscraper Build a house with a flat roof, and some stairs that run up to the flat roof. (Remember to make a hole in the roof where you want the stairs to come out!) Now use a JavaScript loop to stack 10 of these houses on top of each other, and you have your own skyscraper!
Tower Use the cylinder0 method to make a tower. You can give it a cone roof by adding 1 block thick cylinders with the radios decreasing down to 1. Or use a hemisphere for a domed roof!
Rocket! Can you convert your tower into a rocket? Try adding some fins by using the prism method.
Castle Can you take 4 towers and some walls to make a castle? Remember to make a hole in one of the walls if you want to walk into your castle.
Tree Use a cylinder made from wood and a sphere made from something green and create your own giant tree.
Caterpillar Can you use some spheres and make something that looks like a caterpillar?
Rainbow Use arc, and coloured stained glass blocks and make a giant rainbow!
Sushi 1 - Build a House
Planning Your House
B |
B |
B |
B |
B |
B |
B |
B |
B | |
B | | | | | | | |
B | |
B | | | | | | | |
B | |
B | | | | | | | |
B | |
B | | | | | | | |
B | |
B |
W |
W |
B |
D |
B |
W |
W |
B | |
Testing your mod
1. in the Minecraft console, type /js refresh()to reload the mod
2. Point your crosshairs at an empty spot on the ground and type /js house()
Remember: To look at the server console for any errors!
Step 1 – Open your mod file
1. Open the text editor: Sublime Text.
2. In the editor, open the file: Desktop\ CanaryMod\scriptcraft\plugins\coderdojo\house.js
Step 2 – Lay the carpet
1. Move your cursor below the line that says:
2. Move the drone up and add code for the carpet (9 wide, 1 high, 6 deep):
3. Save the file and test your mod:
Step 3 – Build the walls
1. Move your cursor below the last line you added
2. Create a checkpoint!
3. Add code for the brick walls (9 wide, 5 high, 6 deep):
4. Save the file and test your mod:
Step 4 – Put the roof up
1. Move your cursor below the last line you added
2. Move the drone up by 5 blocks and add the roof:
3. Save the file and test your mod:
Step 5 – Add some windows
1. Move your cursor below the last line you added
2. Move back to the checkpoint, move to the place for window 1, and place the window. Repeat for window 2.
3. Save the file and test your mod:
Step 6 – Add a door
1. Move your cursor below the last line you added
2. Move the drone to the checkpoint, go right and place the door
3. Save the file and test your mod:
Other things you can do
Can you change the blocks that the house is made from?
Can you add a back door? Or some extra windows at the back of the house?
Can you make the house bigger?
Sushi 2 - Pyramid
Planning your pyramid
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |4 | | | | | | | | | | | | | | |… | | | | | | | | | | | | | | |… | | | | | | | | | | | | | | |… | | | | | | | | | | | | | | |… | | | | | | | | | | | | | | |… | | | | | | | | | | | | | | |2,3 | | | | | |5 | | | | | | | | |1 | | | | | | |5 | | | | | | | | |
Testing your mod
1. in the Minecraft console, type /js refresh()to reload the mod
2. Point your crosshairs at an empty spot on the ground and type /js pyramid()
Remember: To look at the server console for any errors!
Step 1 – Open your mod file
1. Open the text editor: Sublime Text.
2. In the editor, open the file: Desktop\ CanaryMod\scriptcraft\plugins\coderdojo\pyramid.js
Step 2 – Place the first box
1. Move your cursor below the line that says:
2. Create a variable that says how big the pyramid will be:
3. Move the drone up by one, and create a checkpoint (so we can go back later):
4. Now place the first box:
5. Save the file and test your mod:
Step 3 – Do it again and again and again…
1. Move your cursor below the last line you added
2. Subtract 2 from size:
3. While size is still larger than 0
a. Move the drone up, right and forwards.
b. Place another box
c. Subtract 2 from size
4. Save the file and test your mod
Step 4 - Make a door
1. Move your cursor below the line that says:
2. Move the drone to the checkpoint we made previously:
3. Move the drone right until it is halfway along the pyramid:
4. Now let us make a big hole ine the side of the pyramid:
5. Save the file and test your mod
Other cool things to do
1. Use the following code to hang torches inside your pyaramid:
2. Can you make the pyramid bigger? Change size to 31 and see!
Sushi 3 – A-MAZE-ing
Planning the Maze
1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 | |1 | | | | | | | | | | | | |1 | |1 | |4 |4 |4 |4 |4 |4 |4 |4 |5 |4 | |1 | |1 | |4 | | | | | | |11 | |4 | |1 | |1 | |4 | |8 |8 |8 |8 | |11 | |4 | |1 | |1 | |4 | |10 |14! | | | |11 | |4 | |1 | |1 | |4 | |9 |9 |9 |9 |9 |11 | |4 | |1 | |1 | |4 | | | | | | |11 | |4 | |1 | |1 | |4 | |6 |6 | |12 | |11 | |4 |3 |1 | |1 | |4 | |6 |6 | |12 |13 |11 | |4 | |1 | |1 | |4 | | |7 | | | | | |4 | |1 | |1 | |4 |4 |4 |4 |4 |4 |4 |4 |4 |4 | |1 | |1 | | | | | | | | | | | | |1 | |1 |1 |1 |1 |1 |1 |2 |1 |1 |1 |1 |1 |1 |1 | |
Testing your mod
1. in the Minecraft console, type /js refresh()to reload the mod
2. Point your crosshairs at an empty spot on the ground and type /js mymaze()
Remember: To look at the server console for any errors!
How to do it
1. Open the text editor: Sublime Text.
2. In the editor, open the file: Desktop\ CanaryMod\scriptcraft\plugins\coderdojo\mymaze.js
3. Below is all the code for the maze. You can save and test after every step to make sure you haven’t made any mistakes.
var mazeblock = blocks.brick.red;
d.up();
d.chkpt('begin');
//step 1
d.box0(mazeblock, 28, 4, 28);
d.right().fwd();
d.box0(mazeblock, 26, 4, 26);
// step 2
d.move('begin');
d.right(12);
d.box(blocks.air, 2, 3, 2);
//step 3
d.move('begin');
d.right(24).fwd(10);
d.box(mazeblock, 2, 4, 2);
//step 4
d.move('begin');
d.right(4).fwd(4);
d.box0(mazeblock, 20, 4, 20);
d.fwd().right();
d.box0(mazeblock, 18, 4, 18);
//step 5
d.move('begin');
d.right(20).fwd(22);
d.box(blocks.air, 2, 3, 2);
//step 6
d.move('begin');
d.right(8).fwd(8);
d.box(mazeblock, 4, 4, 4);
//step 7
d.move('begin');
d.right(10).fwd(6);
d.box(mazeblock, 2, 4, 2);
//step 8
d.move('begin');
d.right(8).fwd(18);
d.box(mazeblock, 8, 4, 2);
//step 9
d.move('begin');
d.right(8).fwd(14);
d.box(mazeblock, 10, 4, 2);
//step 10
d.move('begin');
d.right(8).fwd(16);
d.box(mazeblock, 2, 4, 2);
//step 11
d.move('begin');
d.right(18).fwd(8);
d.box(mazeblock, 2, 4, 14);
//step 12
d.move('begin');
d.right(14).fwd(8);
d.box(mazeblock, 2, 4, 4);
//step 13
d.move('begin');
d.right(16).fwd(8);
d.box(mazeblock, 2, 4, 2);
//step 14
d.move('begin');
d.right(10).fwd(17);
d.turn(3).up();
d.hangtorch();
d.left();
d.hangtorch();
MineCraft Server Cheat Sheet
Starting the MineCraft Server
1. Open the Terminal
2. Type cd Desktop
3. Type cd Canarymod
4. Type ./start.sh
This will open a window. We call this the server console window. In the server console window, you will see the server starting. If there is a problem with the code for your mod, you will also it appear in the server console window.
[pic]
Figure 2The server console window
Connecting to the server
1. Run the MineCraft Launcher
2. Make sure your MineCraft profile is set to run MineCraft version 1.8.9. Ask a mentor to help if you are not sure how to do it.
3. Once MineCraft has been launched Select Multiplayer
4. Select Direct Connect
5. Type localhost in the Server Address
6. Click Join Server
Give yourself permission to run mods
You need the right permissions in the MineCraft server to do things like run a mod.
1. Go to the server console window
2. Type op yourminecraftname and press enter, where yourminecraftname is your MineCraft account name.
Where should I save my mods?
All MineCraft mods should be saved here:
\scriptcraft\plugins\coderdojo
Where canarymod folder is the folder where we copied the canarymod server. You will find a couple of mods in that folder already. Open one of them and have a look at how a mod is written.
All mods must have an extension of .js, this tells the server that the file contains a ScriptCraft mod.
Reloading your mod after you make a change
After you have made changes to your mod and saved it, you will want to tell the server to reload the mods so you can test it! To do this:
1. Go to the server console window
2. Type /js refresh() and press enter
Creating a new world when the one you are using gets too full
1. Go to the server console window
2. Stop the server by typing stop and press enter
3. Type ./reset.sh
4. Start the canarymod server again by typing ./start.sh
Stop the day/night cycle
You can use the following two commands in the server console window to help control the time of day:
/time set 6000 Sets the time to early morning
/gamerule doDaylightCycle false Turns off the day/night cycle
Stop the snow/rain
Use the following command in the server console window to stop it raining or snowing
/Toggledownfall
ScriptCraft Mod Cheat Sheet
What does a mod look like?
exports.mymod = function()
{
echo('Running my mod!');
var d = new Drone(self);
//YOUR CODE GOES BELOW
}
The Drone
The Drone is your personal invisible servant in the MineCraft world. Your code will tell the drone where to go, and what MineCraft blocks to put down.
Moving the Drone
Assuming your Drone is called d, you can you use the following code to move the Drone around:
d.up( numberOfBlocks ) moves the Drone Up. For example: up() will move the Drone 1 block up. You can tell it how many blocks to move if you want it to move more than one block.
d.down( numberOfBlocks ) moves the Drone Down.
d.left( numberOfBlocks ) moves the Drone Left.
d.right( numberOfBlocs ) moves the Drone Right.
d.fwd( numberOfBlocs ) moves the Drone Forward (away from the player).
d.back( numberOfBlocs ) moves the Drone Back (towards the player)
d.turn( numberOfTurns ) Turns the Drone Clock-wise (right). For example: turn() will make the Drone turn right 90 degrees. turn(2) will make the Drone turn twice so that it is facing in the opposite direction.
Checkpoints
If you want your Drone to remember a certain location in the MineCraft world, and want it to return to that location (for example if you want to return to the beginning), you use Checkpoints.
You give a Checkpoint a name, and then you can tell the drone to return to the Checkpoint whenever you want.
d.chkpt( name ) Creates a checkpoint at your Drone's current location so it can return there later. Think of it as giving a name to the place where your Drone is located. Use any name you want, but put them in single quotes, for example: d.chkpt('beginning')
d.move( name ) Moves your Drone to a location you named using chkpt() . It brings your Drone back to the place where you saved it. Put the name in single quotes, for example: d.move('beginning')
Basic Objects
It would take forever to build structures one block at a time. Thankfully ScriptCraft has several basic objects that we can build easily. Here are some of the ones we can use today!
1 - Drone.box() method
The box() method is a convenience method for building things.
parameters
• b - the block type - e.g. blocks.sapling.birch (See Block Type section below)
• w (optional - default 1) - the width of the structure
• h (optional - default 1) - the height of the structure
• d (optional - default 1) - the depth of the structure - NB this is not how deep underground the structure lies - this is how far away (depth of field) from the drone the structure will extend.
Example
To create a black structure 4 blocks wide, 9 blocks tall and 1 block long...
d.box(blocks.wool.black, 4, 9, 1);
2 - Drone.box0() method
Another convenience method - this one creates 4 walls with no floor or ceiling.
Parameters
• block - the block type, e.g. blocks.sapling.birch. (See the block type section below.)
• width (optional - default 1) - the width of the structure
• height (optional - default 1) - the height of the structure
• length (optional - default 1) - the length of the structure - how far away (depth of field) from the drone the structure will extend.
Example
To create a stone building with the insided hollowed out 7 wide by 3 tall by 6 long...
d.box0( blocks.stone, 7, 3, 6);
3 - Drone.cylinder() method
A convenience method for building cylinders. Building begins radius blocks to the right and forward.
Parameters
• block type - the block type - e.g. blocks.sapling.birch (See Block Type section below.)
• radius
• height
Example
To create a cylinder of Iron 7 blocks in radius and 1 block high...
d.cylinder(blocks.iron, 7 , 1);
4 - Drone.cylinder0() method
A version of cylinder that hollows out the middle.
Example
To create a hollow cylinder of Iron 7 blocks in radius and 1 block high...
d.cylinder0(blocks.iron, 7, 1);
5 - Drone.door() method
create a door - if a parameter is supplied an Iron door is created otherwise a wooden door is created.
Parameters
• doorType (optional - default wood) - If a parameter is provided then the door is Iron.
Example
To create a wooden door at the drone's location...
d.door();
To create an iron door...
d.door( blocks.door_iron );
6 - Drone.prism() method
Creates a prism. This is useful for roofs on houses.
Parameters
• block - the block type - e.g. blocks.sapling.birch (See Block Type section below.)
• width - the width of the prism
• length - the length of the prism (will be 2 time its height)
Example
d.prism(blocks.oak,3,12);
7 - Drone.prism0() method
A variation on prism which hollows out the inside of the prism. It uses the same parameters as prism.
8 - Drone.sphere() method
Creates a sphere.
Parameters
• block - The block type the sphere will be made of. (See the section on Block Type below.)
• radius - The radius of the sphere.
Example
To create a sphere of Iron with a radius of 10 blocks...
d.sphere( blocks.iron, 10);
9 - Drone.sphere0() method
Creates an empty sphere.
Parameters
• block - The block the sphere will be made of. (See the section on Block Type below.)
• radius - The radius of the sphere.
Example
To create a sphere of Iron with a radius of 10 blocks...
d.sphere0( blocks.iron, 10);
10 - Drone.hemisphere() method
Creates a hemisphere. Hemispheres can be either north or south.
Parameters
• block - the block the hemisphere will be made of. (See the section on Block Type below.)
• radius - the radius of the hemisphere
• northSouth - whether the hemisphere is 'north' or 'south'
Example
To create a wood 'north' hemisphere with a radius of 7 blocks...
d.hemisphere(blocks.oak, 7, 'north');
11 - Drone.hemisphere0() method
Creates a hollow hemisphere. Hemispheres can be either north or south.
Parameters
• block - the block the hemisphere will be made of. (See the section on Block Type below.)
• radius - the radius of the hemisphere
• northSouth - whether the hemisphere is 'north' or 'south'
Example
To create a glass 'north' hemisphere with a radius of 20 blocks...
d.hemisphere0(blocks.glass, 20, 'north');
12 - Drone.arc() method
The arc() method can be used to create 1 or more 90 degree arcs in the horizontal or vertical planes. This method is called by cylinder() and cylinder0() and the sphere() and sphere0() methods.
Parameters
arc() takes a single parameter - an object with the following named properties...
• radius - The radius of the arc.
• blockType - The type of block to use - this is the only (no meta, the bit before the : ). (See Block Type section below.)
• meta - The metadata value (the bit after the : ). (See Block Type section below.)
• orientation (default: 'horizontal' ) - the orientation of the arc - can be 'vertical' or 'horizontal'.
• stack (default: 1 ) - the height or length of the arc (depending on the orientation - if orientation is horizontal then this parameter refers to the height, if vertical then it refers to the length ).
• strokeWidth (default: 1 ) - the width of the stroke (how many blocks) - if drawing nested arcs it's usually a good idea to set strokeWidth to at least 2 so that there are no gaps between each arc.
• fill - If true (or present) then the arc will be filled in.
• quadrants (default: {topleft:true,topright:true,bottomleft:true,bottomright:true} - An object with 4 properties indicating which of the 4 quadrants of a circle to draw. If the quadrants property is absent then all 4 quadrants are drawn.
Examples
To draw a 1/4 circle (top right quadrant only) with a radius of 10 and stroke width of 2 blocks ...
d.arc({blockType: blocks.iron,
meta: 0,
radius: 10,
strokeWidth: 2,
quadrants: { topright: true },
orientation: 'vertical',
stack: 1,
fill: false
} );
13 - Drone.stairs() function
The stairs() function will build a flight of stairs
Parameters
• blockType - should be one of the following:
o blocks.stairs.oak
o blocks.stairs.cobblestone
o blocks.stairs.brick
o blocks.stairs.stone
o blocks.her
o blocks.stairs.sandstone
o blocks.stairs.spruce
o blocks.stairs.birch
o blocks.stairs.jungle
o blocks.stairs.quartz
• width - The width of the staircase - default is 1
• height - The height of the staircase - default is 1
Example
To build an oak staircase 3 blocks wide and 5 blocks tall:
d.stairs(blocks.stairs.oak, 3, 5)
Block Types
Here are some of the block types you can use. Where it ends in COLOUR you can use: white, orange, magenta, lightblue, yellow, lime, pink, gray, lightgray, cyan, purple, blue, brown, green, red, black
blocks.air blocks.stone
blocks.grass blocks.dirt
blocks.cobblestone blocks.oak
blocks.spruce blocks.birch
blocks.jungle blocks.sapling.oak
blocks.sapling.spruce blocks.sapling.birch
blocks.sapling.jungle blocks.bedrock
blocks.water blocks.water_still
blocks.lava blocks.lava_still
blocks.sand blocks.gravel
blocks.gold_ore blocks.iron_ore
blocks.coal_ore blocks.wood
blocks.leaves blocks.sponge
blocks.glass blocks.lapis_lazuli_ore
blocks.lapis_lazuli_block blocks.dispenser
blocks.sandstone blocks.note
blocks.bed blocks.powered_rail
blocks.detector_rail blocks.sticky_piston
blocks.cobweb blocks.grass_tall
blocks.dead_bush blocks.piston
blocks.piston_extn blocks.piston_head
blocks.wool.COLOUR blocks.piston_extended
blocks.dandelion blocks.rose
blocks.mushroom_brown blocks.mushroom_red
blocks.gold blocks.iron
blocks.double_slab.stone blocks.double_slab.sandstone
blocks.double_slab. Wooden blocks.double_slab.cobblestone
blocks.double_slab.brick blocks.double_slab.stonebrick
blocks.double_herbrick blocks.double_slab.quartz
blocks.double_slab.smooth_stone blocks.double_slab.smooth_sandstone
blocks.double_slab.ti le_quartz blocks.slab.sandstone
blocks.slab.wooden blocks.slab.cobblestone
blocks.slab.brick blocks.slab.stonebrick
blocks.herbrick blocks.slab.quartz
blocks.snow blocks.tnt
blocks.moss_stone blocks.obsidian
blocks.torch blocks.fire
blocks.chest blocks.diamond_ore
blocks.diamond blocks.ladder
blocks.rail blocks.sign
blocks.door_iron blocks.ice
blocks.snow blocks.cactus
blocks.jukebox blocks.fence
blocks.glowstone blocks.stained_glass.COLOUR
blocks.trapdoor blocks.brick.stone
blocks.brick.mossy blocks.brick.cracked
blocks.brick.chiseled blocks.brick.red
blocks.iron_bars blocks.glass_pane
blocks.fence_gate blocks.mycelium
blocks.lily_pad her
her_fence herwart
blocks.emerald blocks.redstone
blocks.stained_clay.COLOUR blocks.stained_glass_pane.COLOUR
blocks.trapdoor_iron blocks.prismarine
blocks.hay blocks.carpet.COLOUR
blocks.hardened_clay blocks.coal_block
blocks.packed_ice blocks.gate.spruce
blocks.gate.birch blocks.gate.jungle
blocks.gate.oak blocks.gate.acacia
blocks.fence.spruce blocks.fence.birch
blocks.fence.jungle blocks.fence.oak
blocks.fence.acacia
-----------------------
This tells the server we are creating a new mod called mymod. Feel free to change the name mymod to anything you want! It must be one word without spaces though.
This curly brace marks the beginning of the mod
This curly brace marks the end of the mod
This creates a new Drone. “self” means that the Drone is created beside your MineCraft character. The drone is called d.
This writes a message to the console window
The code for your Drone goes below this line. The // means that this iine is a comment and will be ignored by MineCraft.
This is where the drone will start creating the maze. We should put a checkpoint here so we can return here for each step. To make it easier to walk through the maze we will make all the walls and all the paths 2 blocks wide.
Our Maze Recipe
1. Draw 28x28 hollow box for the outside wall
2. Make a gap in the wall
3. Block the path on the right
4. Draw a 20x20 hollow box for the 1st inside wall
5. Make a hole in this wall
6. Place the 4x4 box
7. Block the path
8. Place a 8x2 wall
9. Place a 10x2 wall
10. Block the path
11. Place a 2x14 wall
12. Place a 2x4 wall
13. Block the path
14. Let us hang some torches here to let the player know they reached the end!
d.move('begin');
d.right(4);
d.fwd(4);
d.up(3);
d.turn(2);
var t = 0;
while (t < 4)
{
d.hangtorch();
d.left(3);
d.hangtorch();
d.left(3);
d.turn(3);
t = t + 1;
}
d.box(blocks.air,1,2,3);
d.right(7);
d.move('begin');
while (size > 0) {
d.up().right().fwd();
d.box0(blocks.sandstone,size,1,size);
size = size – 2;
}
d.right().up();
size = size – 2;
d.box0(blocks.sandstone,size,1,size);
d.up();
d. chkpt('begin');
1.
var size=15;
// Start below this line!!
This is where the drone will start creating the maze. We should put a checkpoint here so we can return here later to make the door.
Our Pyramid Recipe
2. Make a hollow box that is 15 blocks wide, 15 blocks long and 1 block high.
3. Move the drone up, forwards and right by 1 step.
4. Now make a box that is 2 blocks shorter and narrower than the last box you made.
5. Go back to step 2 and keep on making boxes until they become too small (smaller than 1)
6. Remember to make a hole to walk in!
d.move('begin');
d.right(4);
d.door();
d.move('begin');
d.right().up();
d.box(blocks.glass_pane, 2, 3, 1);
d.right(5);
d.box(blocks.glass_pane, 2, 3, 1);
d.up(5);
d.prism(blocks.wood,9,6);
d.box0(blocks.brick.red, 9, 5, 6);
d.chkpt('begin');
d.up();
d.box(blocks.carpet.red, 9, 1, 6);
// Start below this line!!
This is our starting block.
The windows will be 2 blocks wide and 3 blocks high, and start one block from the ground. First window is 1 block to the right of the starting block, and the second window is 5 blocks to the right of the first window.
The door will be in the middle of the house, i.e. 4 steps to the right of the starting block.
Top View of House
We will build a Brick wall for the house. The wall will be 9 blocks wide, 6 blocks deep and 5 blocks high. We should remember to put a carpet on the ground first, and to use a prism to put a roof on the house!
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.