ARCAT, Inc.
SECTION 16730WIRELESS NETWORK COMMUNICATIONS EQUIPMENTDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2017 - 2017 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** Ventev Innovations; WIFI systems and enclosures products..This section is based on the products of Ventev Innovations, which is located at:10999 McCormick Rd.Hunt Valley, MD 21031Toll Free Tel: 800-759-9996Tel: 717-770-2317Email: request info (info@)Web: [ Click Here ] for additional information.The future of innovation begins with Ventev and its focus on designing, engineering, and developing intelligent and exciting products that cover the wireless spectrum. Whether producing new accessories to complement the latest mobile device technologies, or introducing complex, first-to-market battery backup systems, Ventev is changing the way customers think of wireless.Ventev Wireless Infrastructure? designs and manufactures components and complete, turnkey solutions that deploy, protect, power, and improve the performance of every type of wireless network. Offering an extensive line of products such as antennas, enclosures, cable, and solar-powered base stations that support these networks, Ventev Wireless Infrastructure is helping organizations worldwide to build, use, and maintain their wireless networks in both indoor and outdoor applications.[Note to manufacturer: Use this section to tell some more about the uses and advantages of your products.]
GENERAL
SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
WI-Fi Antennas
Raised Access Floor Antennas
Suspended Ceiling Tile Enclosures
WiFi NEMA Enclosures
Access Point Mounting
RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
Section 16050 - Basic Electrical Materials and Methods.
REFERENCES
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
UL50 - Enclosures for Electrical Equipment, Non-Environmental Considerations.
UL508 - Industrial Control Equipment.
UL508A - Standard for Industrial Control Panels.
UL94 - Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.
NEMA Enclosure Types.
SUBMITTALS
Submit under provisions of Section 01300.
Product Data: Manufacturer's data sheets on each product to be used, including:
Preparation instructions and recommendations.
Storage and handling requirements and recommendations.
Installation methods.
Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
Manufacturer's Certificates: Certify products meet or exceed specified requirements.
Closeout Submittals: Provide manufacturer's maintenance instructions that include recommendations for periodic cleaning and maintenance.
QUALITY ASSURANCE
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
Finish areas designated by Architect.
Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
Refinish mock-up area as required to produce acceptable work.
DELIVERY, STORAGE, AND HANDLING
Store products in manufacturer's unopened packaging until ready for installation.
Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.
PROJECT CONDITIONS
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
WARRANTY
Manufacturer's standard Two Year limited Warranty against defects in materials or workmanship.
PRODUCTS
MANUFACTURERS
Acceptable Manufacturer: Ventev Innovations, which is located at: 10999 McCormick Rd.; Hunt Valley, MD 21031; Toll Free Tel: 800-759-9996; Tel: 717-770-2317; Email: request info (info@); Web:
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
Substitutions: Not permitted.
Requests for substitutions will be considered in accordance with provisions of Section 01600.
** NOTE TO SPECIFIER ** Edit the following paragraphs as required and applicable to project requirements. Delete the paragraphs that are not applicable.
WIFI ANTENNAS
** NOTE TO SPECIFIER ** Select the antenna part number/size(s) required from the following paragraphs and delete those not required.
Part Number: M602025O1D43602RA; 2.4/5GHz MIMO Antenna designed to operate with any demanding wireless communication system.
Frequency Range: 2400~2500 / 5150~5850 MHz
Gain: 2 dBi / 2.5 dBi
VSWR: <=2.0 / <=2.5
Polarization: Vertical
Horizontal Beamwidth: 360 degrees
Vertical Beamwidth: 90 degrees / 160 degrees
Max Power: 2W
Connector: RA RPTNC Plug with 36 inches Cable
Dimensions: 5.4 inches by 2.5 inches by 1.2 inches
Operating Temperature Range: Minus 40 degrees F to plus 140 degrees F
Part Number: M6025040O3D402MW; 2.4/5 GHz Micro Omni Antenna optimized for small form factor/aesthetic and mobile Wi-Fi applications.
Frequency Range: 2400-2500 MHz
Bandwidth: 100 MHz
Gain: 2.5 dBi
VSWR: <=2
Frequency Range: 4900 - 5850 MHz
Bandwidth: 950 MHz
Gain: 4 dBi
VSWR: <=2
Impedance: 50 ohms
Polarization: Vertical
Power: 50 watts
Connector: RPTNC male
Port number: 4
Size: 3.54 inches by 1.57 inches
Weight: 4.4 oz
Operating Temperature: minus 40 degrees F to plus 158 degrees F
Mounting Method: Surface Mount
Part Number: M6040060O2D1802R; TerraWave 2.4/5GHz 4/6 dBi Mini Quad Ceiling Antenna with Four RA RPTNC Plugs and 18 inch Pigtails.
Frequency Range: 2400 ~ 2500 MHz / 5150 ~ 5850 MHz
Bandwidth: 100 MHz / 700 MHz
Gain: 4 dBi / 6 dBi
Vertical Beamwidth: 60 degrees / 70 degrees
Horizontal Beamwidth: 360 degrees
VSWR: <= 2.0 / <= 2.5
Nominal Impedance: 50 Ohms
Polarization: Vertical
Max Power: 2 Watts
Connector: RA RPTNC Plug with 18 inch Pigtail
Dimensions: 5.4 inches by 2.9 inches by 1 inch
Weight: 0.44 lbs
Operating Temperature Range: minus 40 degrees F to plus 158 degrees F
Mounting Style: Center Thread Screw
Part Number: M6050060D37202WSX; TerraWave 2.4/5 GHz Junction Box Wi-Fi Antenna with 4-Lead MIMO radios functioning in the 802.11n wireless protocol band.
Frequency Range: 2400 2484 MHz / 4900 5885 MHz
Gain: 5dBi / 6dBi
Polarization: 2 x Horizontal; 2 x Vertical
Horizontal Beamwidth: 75 degrees plus or minus 15 degrees
Vertical Beamwidth: 75 degrees plus or minus 15 degrees
Front to Back Ratio: 9 dB / 12 dB
VSWR/Impedance: 2:1
IsolationCross Polarized Ports: 12 dB / 20 dB
Input Power: 20 W
Dimensions (L x W x H):
Gang Box Only: 6 inches by 3.7 inches by 3.6 inches
With Cover: 6.75 inches by 3.85 inches by 4.88 inches
Connector type: 4 x RPTNC Plug
Pigtail Length: 72 inches
Mounting Options: Wall Mount
Application Environment: Inside Drywall Installation
Construction: Three Gang Electrical Box
Tilt Option: 0 - 45 degrees
Radome Color: White
Part Number: M6060060D3D3602TM; WiFi Micro Patch with Mount
Frequency Range: 2400~2500 / 4900~5900 MHz
Gain: 6 dBi
Bandwidth: 100 / 985 MHz
VSWR: 2:1 Nominal / 2:1 Nominal
Polarization: 2 x Horizontal, 2 x Vertical
Front-to-Back Ratio: 9 dBi / 15 dBi
Impedance: 50 Ohms
Horizontal Beamwidth: 80 degrees plus or minus 10 degrees
Vertical Beamwidth: 90 degrees plus or minus 10 degrees
Power: 20 W
Connector: 4 x RPTNC Plug with 3 foot Pigtails
Mounting Options: Ceiling / Pole / Wall Mount
Application Environment: IP54
Dimensions: 4.7 inches by 4.7 inches by 1.0 inch
Construction: UV Resistant PC
Color: White
Compatible with Cisco 2602e, 2702e, 3602e, 3702e, and 1850e access points.
Part Number: M6060060M1D43602M; 2.4/5Ghz Small Form Omni antenna with 4x RPTNC Plug Connectors with enterprise class 802.11n/ac MIMO access points.
Frequency Range: 2400~2500 / 4900~5850 MHz
Bandwidth: 100 / 985 MHz
Gain: 6 dBi
Vertical Beamwidth: 50 degrees/30 degrees
Horizontal Beamwidth: 360 degrees/360 degrees
VSWR: <=2.0 / <=2.0
Nominal Impedance: 50 Ohms
Polarization: Vertical
Max Power Rating: 10W
Dimensions: 6 inches (H) by 4 inches (W)
Weight: 3 lbs
Connector: 4 x RPTNC Plug
Number/Length/Type Pigtails: 4 x 3 foot Pigtails / RG58
Operating Temperature: minus 40 degrees F to plus 158 degrees F
Part Number: M040030D33620WS; 2.4/5 GHz Junction Box WiFi Antenna.
Frequency Range:
2400 2484 MHz, Gain 5dBi
4900 5885 MHz, Gain 6dBi
Polarization: 2 x Horizontal, 2 x Vertical
Horizontal Beamwidth: 75 degrees plus or minus 15 degrees
Vertical Beamwidth: 75 degrees plus or minus 15 degrees
Front to Back Ratio:
9 dB at 2400 2484 MHz
12 dB at 4900 5885 MHz
VSWR/Impedance: 2:1
IsolationCross Polarized Ports:
12 dB at 2400 2484 MHz
20 dB at 4900 5885 MHz
Input Power: 20 W
Dimensions (L x W x H);
Gang Box Only: 6 inches by 3.7 inches by 3.6 inches
Gang Box With Cover: 6.75 inches by 3.85 inches by 4.88 inches
Connector type: 4 x RPSMA Plug
Pigtail Length: 72 inches
Mounting Options: Wall Mount
Application Environment: Inside Drywall Installation
Construction: Three Gang Electrical Box:
Tilt Option: 0 degrees - 45 degrees
Radome Color: White
Part Number: M6030040O1D1820MP; 2.4/5GHz Mini 3 Pack multiple-output (MIMO) omnidirectional antenna.
Frequency Range: 2400 ~ 2483 / 5150 ~ 5850 MHz
Bandwidth: 83 / 700 MHz
Gain: 3 / 4 dBi
Vertical Beamwidth: 90 degrees / 160 degrees
Horizontal Beamwidth: 360 degrees
VSWR: <= 2.0
Nominal Impedance: 50 Ohms
Polarization: Vertical
Max Power: 2 Watts
Connector: RPSMA Plug
Pigtail Length: 18" Plenum
Dimensions: 5.9 inches by 2.9 inches by 1.0 inch
Weight: 1.55 lbs
Operating Temperature Range: minus 40 degrees F to plus158 degrees F
Lightning Protection: DC Ground
Hole Required to Mount Antenna: 1 inch
Part Number: M6030040O1D3620DP; 2.4/5GHz Mini 2Pack multiple-output (MIMO) omnidirectional antenna with RPSMA Plug Connectors, Dual Band Leads.
Frequency Range: 2400~2500 / 5150~5850 MHz
Bandwidth: 100 / 700 MHz
Gain: 3 dBi / 4 dBi
Vertical Beamwidth: 100 degrees / 100 degrees
Horizontal Beamwidth: 360 degrees
VSWR: <= 2.0
Polarization: Vertical
Max Power: 2W
Lightning Protection: DC Grounded
Connector: RPSMA Plug with 36 inches Cable
Dimensions: 2.9 inches by 5.4 inches by 1.0 inch
Weight: .39 lbs
Operating Temperature Range: minus 40 degrees F to plus158 degrees F
Part Number: M6060060M1D43620M; 2.4/5GHz Small Form Omni antenna 4x RPSMA Plug Connectors.
Frequency Range: 2400~2500 / 4900~5850 MHz
Bandwidth: 100 / 985 MHz
Gain: 6 dBi
Vertical Beamwidth: 50 degrees/30 degrees
Horizontal Beamwidth: 360 degrees/360 degrees
VSWR: <=2.0 / <=2.0
Nominal Impedance: 50 Ohms
Polarization: Vertical
Max Power Rating: 10W
Dimensions: 6 inches (H) by 4 inches (W)
Weight: 3 lbs
Connector: 4 x RPSMA Plug
Number/Length/Type Pigtails: 4 x 3 foot Pigtails / RG58
Operating Temperature: minus 40 degrees F to plus 158 degrees F
RAISED ACCESS FLOOR ANTENNAS
** NOTE TO SPECIFIER ** Select the raised floor antenna part number/size(s) required from the following paragraphs and delete those not required.
Part Number: M6030030O42402TA Floor Wi-Fi Antenna; Raised Access Floor Wi-Fi Antenna Specifications (Antenna installed in Haworth TecCrete 1250 24 inch by 24 inch Floor Tile)
Frequency Ranges: 2.4-2.5 GHz
Gain: <= 3 dBi
Frequency Ranges: 5.150-5.850 GHz
Gain: <= 6 dBi
Vertical Beamwidth (Antenna Length Axis): 55/40
Vertical Beamwidth (Antenna Width Axis): 45/25
Hortizontal Beamwidth: 360
Front-to-Back Ratio: NA
VSWR:<= 2.5 dBi. The VSWR readings assume carpet is covering the Panel.
Passive Inter-Modulation: NA
Polarization: Vertical
Operating Temperature: 0 degrees F to 140 degrees F
Max Power Rating: 10W
Connector and Leads: 4x RPTNC Plug Connectors and 4 by 36 inch Plenum Leads
Dimensions: Length: 13.78 inches; Width: 9 inches; Height: 0.11 inches.
Part Number: M6030030O42402TA2; Raised Access Floor Wi-Fi Antenna -1500 (Antenna installed in Haworth TecCrete 1500 Tile)
Frequency Ranges: 2.4-2.5 GHz / 5.150-5.850 GHz
Gain: <= 3 dBi / <= 6 dBi
Vertical Beamwidth (Antenna Length Axis): 55/40
Vertical Beamwidth (Antenna Width Axis): 45/25
Horizontal Beamwidth: 360
Front-to-Back Ratio: NA
VSWR: <= 2.5 dBi / <= 2.5 dBi. VSWR readings assume carpet is covering the Panel.
Passive Inter-Modulation: NA
Polarization: Vertical
Operating Temperature
0 degrees F to 140 degrees F
Max Power Rating: 10W
Connector and Leads: 4x RPTNC Plug Connectors and 4 x 36 inch Plenum Leads. All leads same color.
Dimensions: Length: 13.78 inches; Width: inches; Height: 0.11 inches.
SUSPENDED CEILING TILE ENCLOSURES
** NOTE TO SPECIFIER ** Select the antenna enclosure part number/size(s) required from the following paragraphs and delete those not required.
Part Number: TW-CTEN-2X2-205B; 2 foot by 2 foot Bevel Ceiling Tile Enclosure Ceiling Tile Enclosure CTEN for AP205
Size: 2 foot by 2 foot by 4 inch dimensions that easily fit into any 2 foot by 2 foot or 2 foot by 4 foot ceiling tile grid
Constructed of powder-coated aluminum
No moving parts significantly reduces failure rates
Meets NEC300-22 and 300-23 standards, making it safe for plenum/air handling installations
Includes key lock for additional security
Designed to allow AP to be serviced without removing enclosure from ceiling tile grid
Meets common building code requirements by including integrated holes for securing enclosure to permanent fixture or structure
Weight: 4 lbs. without AP / 5.5 lbs. with AP
Designed specifically for Aruba 205 only
Includes cord grip
Part Number: TW-CTEN-2X2-205U; 2 foot by 2 foot Flush Ceiling Tile Enclosure CTEN for AP205
Size: 2 foot by 2 foot by 4 inch that easily fit into any 2 foot by 2 foot or 2 foot by 4 foot ceiling tile grid
Constructed of powder-coated aluminum
Includes key lock for additional security
Weight: 4 lbs. without AP / 5.5 lbs. with AP
Includes cord grip
Meets NEC300-22 and 300-23 standards, for plenum/air handling installations
Meets common building code requirements with integrated holes for securing enclosure to permanent fixture or structure
Part Number: TW-CTEN-2X2-215U; 23.75x23.75x1.5 Aruba AP 215 Universal Ceiling Tile Enclosure
Size: 2 foot by 2 foot by 4 inch that easily fit into any 2 foot by 2 foot or 2 foot by 4 foot ceiling tile grid
Constructed of powder-coated aluminum
Includes key lock for additional security
Weight: 4 lbs. without AP / 5.5 lbs. with AP
Includes cord grip
Meets NEC300-22 and 300-23 standards, for plenum/air handling installations
Meets common building code requirements with integrated holes for securing enclosure to permanent fixture or structure
Part Number: TW-CTEN-2X2-225B; 23.75x23.75x1.5 Aruba 225 Bevel Ceiling Tile Enclosure CTEN
Size: 2 foot by 2 foot by 4 inch that easily fit into any 2 foot by 2 foot or 2 foot by 4 foot ceiling tile grid
Constructed of powder-coated aluminum
Includes key lock for additional security
Weight: 4 lbs. without AP / 5.5 lbs. with AP
Includes cord grip
Meets NEC300-22 and 300-23 standards, for plenum/air handling installations
Meets common building code requirements with integrated holes for securing enclosure to permanent fixture or structure
Part Number: TW-CTEN-2X2-225U; 23.75x23.75x1.5 Aruba 225 CTEN Universal Ceiling Tile Enclosure
Size: 2 foot by 2 foot by 4 inch that easily fit into any 2 foot by 2 foot or 2 foot by 4 foot ceiling tile grid
Constructed of powder-coated aluminum
Includes key lock for additional security
Weight: 4 lbs. without AP / 5.5 lbs. with AP
Includes cord grip
Meets NEC300-22 and 300-23 standards, for plenum/air handling installations
Meets common building code requirements with integrated holes for securing enclosure to permanent fixture or structure
Part Number: TW-HD-MOUNTARUBA; T-Bar Co-Lo Mount, Co-Locating Mount for RPSMA Access Points and Co-Located Antennas.
Dimensions: 9.63 inch by 10.07 inch by 5.48 inch
Weight: 2 lbs
Material: Aluminum
Operating Temperature Range: minus 4 degrees F to plus 131 degrees F
Compatible with TerraWave 501621, 527504, 572251, 568911, 333918, 393218, 544625, and 500885 antennas
Mount hosts all Aruba 100, 200, and 300 series indoor access points, Aerohive's 121, 230, 330, and 390 access points, and Samsung's 303e and 403e access points
Part Number: CTEN-2X2-11113F-W; 2 foot by 2 foot by 4 inch Ceiling Tile Enclosure with White Bubble.
Powder-coated aluminum
Includes Universal T-Bar Back Plate to accommodate most access points
Meets NEC300-22 and 300-23 standards for plenum/air handling installations
Includes key lock for security
Designed to allow AP to be serviced without removing enclosure from ceiling tile grid
Meets common building code requirements by including integrated holes for securing enclosure to permanent fixture or structure
Part Number: CTEN-2X2-ID11113W; 2 foot by 2 foot by 4 inch Ceiling Tile WiFi Bubble (W) Ceiling Tile Enclosure CTEN w/Interchangeable Door.
Powder-coated aluminum
Includes key lock for security
Includes cord grip
Meets NEC300-22 and 300-23 standards for plenum/air handling installations
Meets common building code requirements by including integrated mounting tabs to assist in securing enclosure to permanent fixture or structure
Back box design.
Compatible Access Points: Aerohive 130; Aruba 205, 215, 225, 325; Cisco 3502i, 3602i, 2602i, 3702i, 2702i; Meru/Fortinet 1010i, 1020i, 322i, 332i, 822i, 832i; Samsung 302i 303i. 403i; 412i
Part Number: CTEN-2X2-ID-AP325; 2 foot by 2 foot by 4 inch Ceiling Tile AP325 WiFi Ceiling Tile Enclosure CTEN W/Interchangeable Door
Powder-coated aluminum
Includes key lock for security
Includes cord grip
Meets NEC300-22 and 300-23 standards for plenum/air handling installations
Meets common building code requirements by including integrated mounting tabs to assist in securing enclosure to permanent fixture or structure
Durable back box design
Compatible with the Aruba AP325 access point and it ts into both standard or Tegular suspended ceilings.
Part Number: CTEN-2X2-ID-CISCO; 2 foot by 2 foot by 4 inch Ceiling Tile WiFi Cisco Ceiling Tile Enclosure CTEN w/Interchangeable Door.
Powder-coated aluminum
Includes key lock for security
Includes cord grip
Meets NEC300-22 and 300-23 standards for plenum/air handling installations
Meets common building code requirements by including integrated mounting tabs to assist in securing enclosure to permanent fixture or structure
Durable back box design
Compatible with Cisco 2602i, 3602i, 2702i, and 3702i access points and fits into both standard or Tegular suspended ceilings
Part Number: CTEN-2X2-ID-HALO; 2 foot by 2 foot by 4 inch Ceiling Tile WiFi Halo Ceiling Tile Enclosure CTEN w/Interchangeable Door
Powder-coated aluminum
Includes key lock for security
Includes cord grip
Meets NEC300-22 and 300-23 standards for plenum/air handling installations
Meets common building code requirements by including integrated mounting tabs to assist in securing enclosure to permanent fixture or structure
Durable back box design
Integrates with Cisco Aironet 3700 and 3600 Series wireless access points
Part Number: CTEN-2X2-ID-MR34; 2 foot by 2 foot by 4 inch Ceiling Tile MR34 WiFi Ceiling Tile Enclosure CTEN W/Interchangeable Door
Powder-coated aluminum
Includes key lock for security
Includes cord grip
Meets NEC300-22 and 300-23 standards, making it safe for plenum/air handling installations
Meets common building code requirements by including integrated mounting tabs to assist in securing enclosure to permanent fixture or structure
Durable back box design
Compatible with the MR32, MR34, and MR42 access point and fits into both standard or Tegular suspended ceilings.
Ceiling Tile Enclosures: Two year Warranty
Part Number: TW-CTEN-2X2-1142B; 23.75 inches by 23.75 inches by 1.5" 1142/3500i Beveled Ceiling Tile Enclosure CTEN
Size: 24 inches by 24 inches by 1.5 inches
Weight: 3.5 pounds without AP installed, 5.5 pounds with AP installed
Designed to meet NEC300-22 and 300-23 to mount the Cisco AP 1142, Cisco AP 3500 series and Cisco AP 3600 series in plenum/air handling areas
Enclosure fits into a tegular style 2 foot by 2 foot suspended ceiling tile grid
Constructed of powder-coated aluminum
Includes CAT60 key lock for security
No moving parts
No modification of the ceiling tile is required (for standard 2 foot by 2 foot ceiling tile grids)
Servicing the AP can be completed without removing the enclosure from the ceiling tile grid
Includes integrated holes for securing the enclosure to permanent fixture or ceiling structure
Includes cord grip
Part Number: TW-CTEN-2X2-1142U; 23.75 inches by 23.75 inches by 1.5 inches 1142/3500i CTEN. Universal Ceiling Tile Enclosure
Size: 24 inches by 24 inches by 1.5 inches
Weight: 3.5 pounds without AP installed, 5.5 pounds with AP installed
Designed to meet NEC300-22 and 300-23 to mount the Cisco AP 1142, AP 1602i, AP 2602i, AP 3502i, AP 3602i and AP 3702i in plenum/air handling areas
Enclosure fits into a standard or tegular 2 foot by 2 foot suspended ceiling tile grid
Constructed of powder-coated aluminum
Includes CAT60 key lock for security
No moving parts
No modification of the ceiling tile is required (for standard 2 foot by 2 foot ceiling tile grids)
Servicing the AP can be completed without removing the enclosure from the ceiling tile grid
Includes integrated holes for securing the enclosure to permanent fixture or ceiling structure
Includes cord grip
Part Number: TW-CTEN-2X2-3802U; 23.75x23.75x1.5 3802 Ceiling Tile Enclosure CTEN
Size: 23.75 inches by 23.75 inches by 4 inches. Easily fits into any 2 foot by 2 foot or 2 foot by 4 foot ceiling tile grid
Designed to meet Cisco 3802i and 2802i access points.
Constructed of powder-coated aluminum, making it one of the lightest enclosures on the market
Includes key lock for additional security
Sleek form factor allows for simple installation no
modification of existing ceiling tile grid required
Includes cord grip
Meets NEC300-22 and 300-23 standards, making it safe for plenum/air handling installations
Meets common building code requirements by including integrated mounting tabs to assist in securing enclosure to permanent xture or structure
Durable back box design
Part Number: TW-CTEN-P; 12 inches by 24 inches Universal Plastic Ceiling Tile Enclosure.
Size: 12 inches by 24 inches by 7 inches (24 inches by 24 inches by 7 inches with insert)
Weight: 7.5 pounds (9 pounds with insert)
Constructed of light-weight, fire retardant acrylontitrile-butadiene styrene (ABS) plastic
Comprised of UL 94 V0-rated raw materials
Designed to meet National Electric Code (NEC) 300-22 and 300-23 for plenum installations
Servicing the AP can be completed without removing the enclosure from the ceiling tile grid
Adjustable backplate pre-drilled for Cisco APs with self-tapping screws to accommodate other manufacturer's APs
With a 1 foot by 2 foot insert to fit either a 1 foot by 2 foot or 2 foot by 2 foot ceiling tile grid
Two Quarter Turn Locks
Clear window and vented door inserts
Includes hardware to secure the enclosure to permanent fixture or ceiling structure.
Part Number: TW-HC-1142A; 18 inches by 18 inches by 1.5 inches AP 1142/3500i Hard Cap Ceiling Enclosure.
Size: 18 inches by 18 inches by 1.5 inches
Weight: 2.5 pounds without AP installed, 4.5 pounds with AP installed
Designed to meet NEC300-22 and 300-23 to mount the Cisco AP 1142, Cisco AP 3502i and Cisco AP 3602i in plenum/air handling areas
Enclosure fits into standard ceiling or wall construction (minimum clearance between studs is 13 inches)
Constructed of powder-coated aluminum
Includes CAT60 key lock for security, 1 cord grip, 4 wood screws and 4 toggle bolts
No moving parts
Part Number: CTEN-2X2-11113B-C; 2 foot by 2 foot or 2 by 4 inch Bevel Ceiling Tile Enclosure with Clear Bubble
Size: 24 inch by 24 inch by 4 inch that slides easily into any 2 foot by 2 foot or 2 by 4 foot ceiling tile grid.
Constructed of powder-coated aluminum
Includes universal T-Bar back plate.
No moving parts significantly reduces failure rates
Meets NEC300-22 and NEC300-23 standards for plenum/air handling installations.
Includes key lock.
Includes integrated holes for securing enclosure to permanent fixture or structure.
Weight: 4 lbs. without AP / 5.5 lbs. with AP
Includes cord grip.
Part Number: CTEN-2X2-11113B-W; 2 foot by 2 foot or 2 by 4 inch Bevel Ceiling Tile Enclosure with White Bubble
Size: 24 inch by 24 inch by 4 inch that slides easily into any 2 by 2 foot or 2 by 4 foot; ceiling tile grid.
Constructed of powder-coated aluminum
Includes universal T-Bar back plate.
No moving parts significantly reduces failure rates
Meets NEC300-22 and NEC300-23 standards for plenum/air handling installations.
Includes key lock.
Includes integrated holes for securing enclosure to permanent fixture or structure.
Weight: 4 lbs. without AP / 5.5 lbs. with AP
Includes cord grip.
Part Number: CTEN-2X2-11113F-C; 2 foot by 2 foot or 2 by 4 inch Ceiling Tile Enclosure with Clear Bubble
Size: 24 inch by 24 inch by 4 inch that slides easily into any 2 by 2 foot or 2 by 4 foot ceiling tile grid.
Constructed of powder-coated aluminum
Includes universal T-Bar back plate.
No moving parts significantly reduces failure rates
Meets NEC300-22 and NEC300-23 standards for plenum/air handling installations.
Includes key lock.
Includes integrated holes for securing enclosure to permanent fixture or structure.
Weight: 4 lbs. without AP / 5.5 lbs. with AP
Includes cord grip.
Part Number: CTEN-2X2-ID11113C; 2 foot by 2 foot or 2 foot by 4 foot WiFi Bubble(C) Ceiling Tile Enclosure CTEN with Interchangeable Door
Size: 23.75 inch by 23.75 inch by 4 inch. Easily fits into any 2 foot by 2 foot or 2 foot by 4 foot ceiling tile grid
Constructed of powder-coated aluminum, making it one of the lightest enclosures on the market
Includes key lock for additional security
Includes cord grip
Meets NEC300-22 and 300-23 standards, making it safe for plenum/air handling installations
Meets common building code requirements by including integrated mounting tabs to assist in securing enclosure to permanent fixture or structure
Durable back box design
WIFI NEMA ENCLOSURES
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104KC-4.5; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure. Clear Door/Key Lock
Part Number: CV12106KC-4.5; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Clear Door/Key Lock
Part Number: CV14126KC-4.5; 14 inch by 12 inch by 6 inch Polycarbonate Enclosure. Clear Door/Key Locks
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Clear
Locking Mechanism:
CAT60 Lock
Bulkhead Antenna Holes
4 Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104KC-BASIC; 12 inch by 10 inch by 4 inch Cisco Backplate Polycarbonate Enclosure; Clear Door/Key Lock
Part Number: CV12104KC-BASIC; 12 inch by 10 inch by 4 inch Cisco Backplate Polycarbonate Enclosure. Clear Door/Key Lock
Part Number: CV14126KC-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key Locks
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Clear
Locking Mechanism:
CAT60 Lock
Bulkhead Antenna Holes
Basic
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104KC-NH 12 inch by 10 inch by 4 inch Polycarbonate Enclosure. Clear Door/Key Lock
Part Number: CV12106KC-NH 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Clear Door/Key Lock
Part Number: CV14126KC-NH14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key Locks
Part Number: CV12106KC-ODO4T 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Clear Door/Key, 4T ODO
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Clear
Locking Mechanism: CAT60 Lock
Bulkhead Antenna Holes
No Holes
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104KO-4.5 12 inch by 10 inch by 4 inch Polycarbonate Enclosure. Solid Door/Key Lock
Part Number: CV12106KO-4.5 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Solid Door/Key Lock
Part Number: CV14126KO-4.514 inch by 12 inch by 6 inch Enclosure. Solid Door/Key Lock
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Solid
Locking Mechanism:
CAT60 Lock
Bulkhead Antenna Holes
4 Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104KO-BASIC; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure. Solid Door/Key Lock
Part Number: CV12106KO-BASIC; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Solid Door/Key Lock
Part Number: CV14126KO-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key Lock
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Solid
Locking Mechanism:
CAT60 Lock
Bulkhead Antenna Holes
Basic
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104KO-NH; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure. Solid Door/Key Lock
Part Number: CV12106KO-NH; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Solid Door/Key Lock
Part Number: CV12106KO-ODO4T; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Solid Door/Key. Integrated Omni-Directional Antenna with 4 RPTNC Plug Connectors.
Part Number: CV14126KO-NH; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key Lock
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Solid
Locking Mechanism:
CAT60 Lock
Bulkhead Antenna Holes
4 Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104LC-4.5; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure; Clear Door/Latch Locks
Part Number: CV12106LC-4.5; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Clear Door/Latch Locks
Part Number: CV14126LC-4.5; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch Locks
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Clear
Locking Mechanism:
Locking Latches
Bulkhead Antenna Holes
4 Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104LC-BASIC; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure. Clear Door/Latch Locks
Part Number: CV12106LC-BASIC; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Clear Door/Latch Locks
Part Number: CV14126LC-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch Locks
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Clear
Locking Mechanism:
Locking Latches
Bulkhead Antenna Holes
Basic
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104LC-NH; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure. Clear Door/Latch Locks
Part Number: CV12106LC-NH; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Clear Door/Latch Locks
Part Number: CV12106LC-ODO4T; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Clear Door/Latch. Integrated Omni-Directional Antenna with 4 RPTNC Plug Connectors.
Part Number: CV14126LC-NH; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch Locks
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Clear
Locking Mechanism: Locking Latches
Bulkhead Antenna Holes
No Holes
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104LO-4.5; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure. Solid Door/Latch Locks
Part Number: CV12106LO-4.5; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Solid Door/Latch Locks
Part Number: CV14126LO-4.5; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Latch Locks
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Solid
Locking Mechanism:
Locking Latches
Bulkhead Antenna Holes
4 Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104LO-BASIC; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure. Solid Door/Latch Locks
Part Number: CV12106LO-BASIC; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Solid Door/Latch Locks
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Solid
Locking Mechanism:
Locking Latches
Bulkhead Antenna Holes
Basic
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12104LO-NH; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure. Solid Door/Latch Locks
Part Number: CV12106LO-NH; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure. Solid Door/Latch Locks
Part Number: CV14126LO-NH; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Latch Locks
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door: Solid
Locking Mechanism:
Locking Latches
Bulkhead Antenna Holes
No Holes
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: CV12106LO-ODP4T-W; 12 inch by 10 inch by 6 inch White Polycarbonate Enclosure with Integrated Patch Antenna
Features:
Includes aluminum back plate with pre-drilled holes to support wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
Polycarbonate UL F1 Rated for Outdoor UV Exposure
Color is white with a gloss finish
Door: Solid
Locking Mechanism: Locking Latches
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: UV12104KC-BASIC; 12 inch by 10 inch by 4 inch Universal Backplate Enclosure. Clear Door/Key Lock
Part Number: UV12104KC-NH; 12 inch by 10 inch by 4 inch Enclosure. Clear Door/Key Lock
Part Number: UV12106KC-BASIC; 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Key Lock
Part Number: UV12106KC-NH; 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Key Lock
Part Number: UV12104LO-NH; 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Key Lock
Part Number: UV12106KC-ODO3S; 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Key, 3S ODO
Part Number: UV12106KC-ODO4S; 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Key, 4S ODO
Part Number: UV12106KC-ODO4T; 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Key, 4T ODO
Part Number: UV12106KC-ODO6S; 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Key, 6S ODO
Part Number: UV14126KC-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key Lock
Part Number: UV14126KC-NH; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key Lock
Part Number: UV14126KC-ODO3S; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key, 3S ODO
Part Number: UV14126KC-ODO4S; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key, 4S ODO
Part Number: UV14126KC-ODO4T; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key, 4T ODO
Part Number: UV14126KC-ODO6S; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key, 6S ODO
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Enclosure Construction: Thermoplastic material UL F1 Rated for Outdoor UV Exposure
Finish: Color is light gray with a gloss finish
Color is light gray with a gloss finish
Door:
Clear
Locking Mechanism:
CAT60 Lock
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete those not required.
Bulkhead Antenna Holes
Basic
No Holes
3 Holes
4 Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
1/4 inch (RPSMA)
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: UV12104KO-BASIC; 12 inch by 10 inch by 4 inch Universal Backplate Enclosure. Solid Door/Key Lock
Part Number: UV12104KO-NH; 12 inch by 10 inch by 4 inch Enclosure. Solid Door/Key Lock
Part Number: UV12106KO-BASIC; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Key Lock
Part Number: UV12106KO-NH; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Key Lock
Part Number: UV12106KO-ODO3S; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Key, 3S ODO
Part Number: UV12106KO-ODO4S; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Key, 4S ODO
Part Number: UV12106KO-ODO4T; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Key, 4T ODO
Part Number: UV12106KO-ODO6S; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Key, 6S ODO
Part Number: UV14126KO-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key Lock
Part Number: UV14126KO-NH; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key Lock
Part Number: UV14126KO-ODO3S; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key; 3T ODO
Part Number: UV14126KO-ODO4S; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key; 4S ODO
Part Number: UV14126KO-ODO4S; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key; 6S ODO
Part Number: UV14126KO-ODO4T; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key; 4T ODO
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Enclosure Construction: Thermoplastic material UL F1 Rated for Outdoor UV Exposure
Finish: Color is light gray with a gloss finish
Color is light gray with a gloss finish
Door:
Solid
Locking Mechanism:
CAT60 Lock
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete those not required.
Bulkhead Antenna Holes
Basic
No Holes
3 Holes
4 Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
1/4" (RPSMA)
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: UV12104LC-BASIC, 12 inch by 10 inch by 4 inch Universal Backplate Enclosure. Clear Door/Latch Lock
Part Number: UV12104LC-NH, 12 inch by 10 inch by 4 inch Enclosure. Clear Door/Latch Lock
Part Number: UV12106LC-BASIC, 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Latch Locks
Part Number: UV12106LC-NH, 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Latch Locks
Part Number: UV12106LC-ODO3S, 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Latch, 3S ODO
Part Number: UV12106LC-ODO4S, 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Latch, 4S ODO
Part Number: UV12106LC-ODO4T, 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Latch, 4T ODO
Part Number: UV12106LC-ODO6S, 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Latch, 6S ODO
Part Number: UV14126LC-BASIC14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch Locks
Part Number: UV14126LC-NH14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch Locks
Part Number: UV14126LC-ODO3S14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch, 3S ODO
Part Number: UV14126LC-ODO4S14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch, 4S ODO
Part Number: UV14126LC-ODO4T14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch, 4T ODO
Part Number: UV14126LC-ODO6S14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch, 6S ODO
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Enclosure Construction: Thermoplastic material UL F1 Rated for Outdoor UV Exposure
Finish: Color is light gray with a gloss finish
Door:
Clear
Locking Mechanism:
Locking Latches
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete those not required.
Bulkhead Antenna Holes
Basic
No Holes
3 Holes
4 Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
1/4" (RPSMA)
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number/Size:
** NOTE TO SPECIFIER ** Select the part number/size(s) required from the following paragraphs and delete those not required.
Part Number: UV12106LO-NH; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Latch Locks
Part Number: UV12106LO-ODO3S; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Latch, 3S ODO
Part Number: UV12106LO-ODO4S; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Latch, 4S ODO
Part Number: UV12106LO-ODO4T; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Latch, 4T ODO
Part Number: UV12106LO-ODO6S; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Latch, 6S ODO
Part Number: UV14126LO-NH; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Latch Locks
Part Number: UV14126LO-ODO3S; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Latch, 3S ODO
Part Number: UV14126LO-ODO4S; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Latch, 4S ODO
Part Number: UV14126LO-ODO4T; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Latch, 4T ODO
Part Number: UV14126LO-ODO6S; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Latch, 6S ODO
Features:
Includes mounting plate with pre-drilled holes to support Cisco wireless access points
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws
RoHS compliant
Enclosure Construction: Thermoplastic material UL F1 Rated for Outdoor UV Exposure
Color is light gray with a gloss finish
Door:
Solid
Locking Mechanism:
Locking Latches
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete those not required.
Bulkhead Antenna Holes
Basic
No Holes
3 Holes
4 Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
1/4 inch (RPSMA)
Accessories:
** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those not required.
Pole Mount Kit
Wall Mount Kit
Custom Jumpers
NEMA Plug
Lightning Protection
Replacement Keys
Part Number: UV12104LO-BASIC; 12 inch by 10 inch by 4 inch Enclosure. Solid Door/Latch
Protect RF equipment from elements, theft and tampering
Includes universal mounting plate to support all major wireless vendors, such as Motorola, Aruba, Meru, Juniper and others
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws and grounding hardware
All TerraWave polycarbonate enclosures are RoHS compliant
Enclosure Construction: Constructed of thermoplastic material
UL F1 Rated for Outdoor UV Exposure
Finish: Color is light gray with a gloss finish
Options
Door: Solid
Locking Mechanism: Locking Latches
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete those not required.
Bulkhead Antenna Holes
Basic
3 Holes
4 Hoes
No Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
1/4 inch (RPSMA)
Part Number: UV12106LO-BASIC; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Latch Locks
Protect RF equipment from elements, theft and tampering
Includes universal mounting plate to support all major wireless vendors, such as Motorola, Aruba, Meru, Juniper and others
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws and grounding hardware
All TerraWave polycarbonate enclosures are RoHS compliant
Enclosure Construction: Constructed of thermoplastic material
UL F1 Rated for Outdoor UV Exposure
Finish: Color is light gray with a gloss finish
Options
Door: Solid
Locking Mechanism: Locking Latches
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete those not required.
Bulkhead Antenna Holes
Basic
3 Holes
4 Hoes
No Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
1/4 inch (RPSMA)
Part Number: UV14126LO-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Latch Locks Non-metallic enclosures are commonly used in harsh environments or to protect wireless LAN equipment from damage caused by tampering.
Protect RF equipment from elements, theft and tampering
Includes universal mounting plate to support all major wireless vendors, such as Motorola, Aruba, Meru, Juniper and others
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws and grounding hardware
All TerraWave polycarbonate enclosures are RoHS compliant
Enclosure Construction: Constructed of thermoplastic material
UL F1 Rated for Outdoor UV Exposure
Finish: Color is light gray with a gloss finish
Options
Door: Solid
Locking Mechanism: Locking Latches
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete those not required.
Bulkhead Antenna Holes
Basic
3 Holes
4 Hoes
No Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
1/4 inch (RPSMA)
Part Number: V14126LC-4.25H; 14 inch by 12 inch by 6 inch Heat Enclosure. Clear Door/Latch
Includes universal mounting plate to support all major wireless vendors, such as Motorola, Aruba, Meru, Juniper and others
Operating temperature range: minus 40 degrees F to plus 265 degrees F
Can be mounted indoors or outdoors to provide NEMA 4X protection
Furnished hardware kit includes panel mounting screws and grounding hardware
All TerraWave polycarbonate enclosures are RoHS compliant
Enclosure Construction: Constructed of thermoplastic material
UL F1 Rated for Outdoor UV Exposure
Finish: Color is light gray with a gloss finish
Options
Door: Clear
Locking Mechanism: Locking Latches
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete those not required.
Bulkhead Antenna Holes
Basic
3 Holes
4 Hoes
No Holes
Bulkhead Antenna Hole Sizes
1/2 inch (RPTNC)
1/4 inch (RPSMA)
ACCESS POINT MOUNTING
** NOTE TO SPECIFIER ** Select the mount part number/size(s) required from the following paragraphs and delete those not required.
Part Number: TW-HD-MOUNT502; Cisco Co-Locating Mount for Access Point and Antenna is designed to simplify deployments and conceal an access point and external cables.
Dimensions:
9.53 inch by 9.98 inch by 4.57 inch
Weight: 2 lbs
Material: Aluminum
Operating Temperature Range: minus 4 degrees F to plus 131 degrees F
Part Number: TW-HWM-C-CVR; Compact Horizontal Wall Mount with Cover
Small form factor, lightweight and low profile design
Offers mounting solution for most Wireless Access Points
Rigid base design for improved durability
Able to secure directly to single Gang electrical box
Designed with cover that swings down for easy access to AP and cables
Designed with cover to conceal cabling and data outlet
Compatible with most manufacturers' APs
Part Number: TW-HWM-C-NC; Compact Horizontal Wall Mount - No Cover
Small form factor, lightweight and low profile design
Offers mounting solution for most Wireless Access Points
Rigid base design for improved durability
Able to secure directly to single Gang electrical box
Compatible with most manufacturers' APs
Part Number: TW-HD-MOUNTARUBA; T-Bar Co-Lo Mount, Co-Locating Mount for RPSMA Access Points and Co-Located Antennas.
Dimensions: 9.63 inch by 10.07 inch by 5.48 inch
Weight: 2 lbs
Material: Aluminum
Operating Temperature Range: minus 4 degrees F to plus 131 degrees F
Compatible with TerraWave 501621, 527504, 572251, 568911, 333918, 393218, 544625, and 500885 antennas
Mount hosts all Aruba 100, 200, and 300 series indoor access points, Aerohive's 121, 230, 330, and 390 access points, and Samsung's 303e and 403e access points
Part Number: TW-IBEAM-MNT-AP; IBeam Mounting Solution (AP) Low Profile I-Beam Warehouse Mounting Solution designed to allow mounting of an AP or AP and bubble enclosure to an I-Beam.
Can be used Indoor or Outdoor
Constructed of Corrosion Resistant 5052 Aluminum (Marine Grade)
Includes I-Beam Clamps
Can accommodate I-Beams from 3 inch-10 inch width
Can be mounted vertically or horizontally
4 slots to accommodate wire/cable to secure the bracket to the I-beam should the I-Beam clamps fail
Can accommodate bubble enclosures, all paint can antennas, all patch antennas that can use UNIV-ART-MOUNTT, and all screw mount omni antennas
Includes hole pattern to accommodate Cisco Access Points
Includes T-Bar to accommodate most other Access Points
Pressed in corrosion resistant Stainless Steel Threaded Inserts for easy installation of accessories
Part Number: TW-IBEAM-MNT-ENCL; IBeam Mounting Solution for enclosures is designed to allow mounting of a 12 inch by 10 inch by 4 inch, 12 inch by 10 inch by 6 inch, or a 14 inch by 12 inch by 6 inch polycarbonate enclosure to an I-Beam.
Can be used Indoor or Outdoor
Constructed of Corrosion Resistant 5052 Aluminum (Marine
Grade)
Includes I-Beam Clamps
Can accommodate I-Beams from 3 inch-10 inch width
Can be mounted vertically or horizontally
4 slots to accommodate wire/cable to secure the bracket to the I-beam should the I-Beam clamps fail
Can accommodate any 12 inch by 10 inch by 4, 12 inch by 10 inch by 6, and 14 inch by 12 inch by 6 Polycarbonate Enclosures (Indoor or Outdoor), all paint can antennas (Indoor or Outdoor), all patch antennas that can use UNIV-ART-MOUNTT (Indoor or Outdoor), and all screw mount omni antennas (Indoor Only)
Pressed in corrosion resistant Stainless Steel Threaded Inserts for easy installation of accessories
Part Number: V-HWM-11113H-W; Horizontal Wall Mount With White Bubble Enclosure and hinged T-bar backplate is designed to provide optimal Wi-Fi coverage in high-ceiling structures.
Size: 24 inch by 24 inch by 4 inch that slides easily into any 2 by 2 foot or 2 by 4 foot ceiling tile grid.
Constructed of powder-coated aluminum
No moving parts significantly reduces failure rates
AP mounted to enclosure back plate for additional security
Fits most indoor APs with integrated antennas
Weight: 4.5 lbs. without AP / 6 lbs. with AP
4 Keyholes for wall mounting
Cutout for 1 gang Ethernet outlet
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete those not required.
Bubble:
Clear
White
Compatible Access Points
Cisco APs
Aruba APs
Meru APs
Part Number/Size: V-HWM-11113H-C; 12 inch by 8 inch by 4 inch Horizontal Wall Mount with Bubble Enclosure
Constructed of powder-coated aluminum
No moving parts
AP mounted to enclosure back plate
Fits most indoor APs with integrated antennas
Weight: 4.5 lbs. without AP / 6 lbs. with AP
4 Keyholes for wall mounting
Cutout for 1 gang Ethernet outlet
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete those not required.
Enclosure Type
Clear
White
MIrror
Compatible Access Points
Cisco APs
Aruba APs
Meru APs
EXECUTION
EXAMINATION
Do not begin installation until substrates have been properly prepared.
If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
PREPARATION
Clean surfaces thoroughly prior to installation.
Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
INSTALLATION
Install in accordance with manufacturer's instructions and in proper relationship with adjacent materials. Test units for proper operation.
PROTECTION
Protect installed products until completion of project.
Touch-up, repair or replace damaged products before Substantial Completion.
SCHEDULES
** NOTE TO SPECIFIER ** Retain Paragraph below if required to suit project requirements. Identify products by name on the Drawings or use this paragraph to define the location of each type of material to be used. Edit as required to suit project or delete and identify products on the Drawings.
:
:
END OF SECTION ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.