7350 Win 7 driver installation procedure
7350 Win 7 driver installation procedure
1. Download -7350 V11 driver from:
2. Double click on -7350DriverV11 folder to unzip
3. Double click on -7350DriverV11 file folder to open
4. Double click on WIN2000(XP-7-Vista) folder
5. Double click on X64 file folder
6. Double click on PrnSetup64
7. After window pops up, click on “Extract all”
8. After “Destination” window pops up, click “Extract”
9. Double click on -7350DriverV11 folder
10. Double click on WIN2000(XP-7-Vista) folder
11. Don’t click on X64 this tim, but double click on “ Setup”
12. Click on “Run”
13. “Welcome to use Printers” window pops up. Click “Install”.
14. After message – “successfully installed on LPT1 printer port appears,
Click “OK”
15. Close any open windows.
(continued on pg 2)
(pg 2)
16. Click on Start button on desktop.
17. Select Devices and Printers. You should see -7350 listed as a printer.
18. Right click on the printer and select “Printer Properties”
19. Click on “ports” tab and check the appropriate port the computer is using for the printer.
20. Click apply
21. Click “general” tab
22. click on “print test page” to test printer.
23. Check printer for proper test printout.
-end of procedure
Notes:
Printer should be set to EPSON emulation in most cases
If using a USB to parallel cable, you may have to try each USB virtual port on the driver until the test page prints.
If using a print server, check appropriate IP settings to establish communication.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.