Community.hpe.com
HP Integrity BL870c/880c/890c i2 Server Blade - How to Reset the ILO/MP and LoginIssueUnable to access the MP on a BL890c i2 blade server as the password is not functioning or was forgotten.SolutionOn the new BL8x0c i2 blades the default login and password is not Admin/Admin any more, so there are some new steps to reset the ILO/MP login.On these servers we need to use the Physical Presence Button, the button is in a pin hole so a pin is required to press it.This picture shows the button location:Sl NoDescription10Physical presence buttonThis summarizes the button functions:ILO soft resetPress Physical Presence Button for less than 4 seconds Press PhysicalA soft reset can be performed using the MP>CM>XD command or the ILO GUI.TPM (Trust Platform Module for HPUX systems) resetPress Physical Presence Button for greater than 4 seconds and less than 8.MP/ILO login resetPress Physical Presence Button for greater than 8 sec and less than 12 to reset the iLO login. On a BL870c i2 or a BL890c i2 the button on the first blade to the left(monarch blade) needs to be pressed.Once the MP is reset there will be no prompt asking for a login to access the MP, all that is required is to get access to the MP through the ILO IP address or a local serial console or laptop using the SUV serial port.There will be no prompt to access the ILO/MP and this message will show up:请从串口登陆ilo卡(mp卡)后,用大头针之类的东西按住10号位置的小孔10秒钟后松手会出现以下提示,此时敲2次回车或者使用默认密码可以登陆mp************************************************************************* ALERT! MP SECURITY OVERRIDE IS SET Security enforcement is disabled. This mode will timeout in 15 minutes or less. To manually exit this mode, see the SO command. ************************************************************************* MP ACCESS IS NOT SECURE Default MP users are currently configured and remote access is enabled. Modify default users' passwords or delete default users (see UC command) OR Disable all types of remote access (see SA command)*************************************************************************按一下步骤可以修改administrator密码[luda-1] MP:CM> uc UC This command allows you to modify the user configuration. User Configuration Menu: L - List current users N - Add a New user C - Change a current user D - Delete a current user Enter menu item or [Q] to Quit: cc Current User Configuration: Login ID User Name Access Rights Enabled -------------------------------------------------------------------------- 1 - Admin Default Admin C, P, M, U, V Yes 2 - Oper Default Operator C, V Yes Select User to modify by number, or [Q] to Quit: 1(此处选择administrator或者admin 给管理用户修改自定义的密码)1Current User Parameters: L - User Login ID : Admin P - User Password : ************ U - User Name : Default Admin W - User Workgroup : R - User Access Rights : Console access, Power control, MP configuration, User administration, Virtual Media - - User Operating Mode : Multiple - - User Enabled/Disabled : Enabled Enter parameter(s) to change, A to modify All, or [Q] to Quit: pp For each parameter, enter: New value, or <CR> to retain the current value, or Q to Quit User Password: 6-24 characters <CR> to retain current password Enter New Password: Enter New Password for confirmation: -> Password will be updated New User Parameters (* modified values): L - User Login ID : Admin * P - User Password : ************ U - User Name : Default Admin W - User Workgroup : R - User Access Rights : Console access, Power control, MP configuration, User administration, Virtual Media - - User Operating Mode : Multiple - - User Enabled/Disabled : Enabled Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: qq User Configuration Menu: L - List current users N - Add a New user C - Change a current user D - Delete a current user Enter menu item or [Q] to Quit: qq Thanks &Best Regards如果您对于此case还有相关问题需要解决,可以通过回复邮件或者拨打8008107000电话提供服务ID转接到我。欢迎您对本次服务提出意见或建议。-------------------------------------------------------陈明惠普远程诊断工程师GSD Customer Solution Center DalianTechnology Services, Enterprise GroupTel: 8008107000(座机) or 4008107000(手机)Email: 134@------------------------------------------------------- 发件人: Chen, Ming (GSD CSC Dalian) 发送时间: 2014年6月2日 12:33收件人: 'jun_hong@.cn'主题: 4729328674 北京汽车股份有限公司 尊敬的客户,您好:感谢您致电惠普服务热线,我是为您提供服务的工程师陈明,本次的服务单号为: 4729328674 BL890ci2 ilo密码忘记后重置文档如下: HP Integrity BL870c/880c/890c i2 Server Blade - How to Reset the ILO/MP and Login Solution忘记密码需要用尖锐物品 例如笔尖 按住10号位置小孔10秒后松手,此时登陆不需要密码,Sl NoDescription10Physical presence buttonMP/ILO login resetPress Physical Presence Button for greater than 8 sec and less than 12 to reset the iLO login. On a BL870c i2 or a BL890c i2 the button on the first blade to the left(monarch blade) needs to be pressed.Once the MP is reset there will be no prompt asking for a login to access the MP, all that is required is to get access to the MP through the ILO IP address or a local serial console or laptop using the SUV serial port.There will be no prompt to access the ILO/MP and this message will show up:然后根据一下步骤操作即可。************************************************************************* ALERT! MP SECURITY OVERRIDE IS SET Security enforcement is disabled. This mode will timeout in 15 minutes or less. To manually exit this mode, see the SO command. *************************************************************************There will be a prompt change:SEC! hpiLONow the system will provide 15 min to modify the accounts password or create a new one.Once a new password or account is set in order to get the MP to normal mode before the 15 min the SO command can be used.MP main menuCO: Console VFP: Virtual Front Panel CM: Command Menu CL: Console Log SL: Show Event Logs HE: Main Help Menu SEC! hpiLO-> cm SEC! CM:hpiLO-> soSO = This command allows us to modify the security options.For User Configuration see the UC command.For SSH enable/disable see the SA command.Security Options Menu:O - Security OptionsL - SSL CertificateH - SSH Key PairsEnter menu item or [Q] to Quit: o o Current Security Options: L - Login Timeout in minutes : 1 N - Number of Password Faults allowed : 3 S - Security Override Mode : Enabled Enter parameter(s) to change, A to modify All, or [Q] to Quit: s s For each parameter, enter: New value, or to retain the current value, or DEFAULT to set the default value, or Q to Quit Security Override Mode Configuration: D - Disabled (default) Current -> - - Enabled Enter new value, or Q to Quit: d d -> Security will be enabled. New Security Options (* modified values): L - Login Timeout in minutes : 1 N - Number of Password Faults allowed : 3 * S - Security Override Mode : Disabled Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: y y -> Security Options have been updated. Security Options Menu: O - Security Options L - SSL Certificate H - SSH Key Pairs Enter menu item or [Q] to Quit: q q The "SEC!" will no longer show on the prompt. CM:hpiLO->The MP login should now work normally. ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- getroman com reviews
- acurafinancialservices.com account management
- acurafinancialservices.com account ma
- getroman.com tv
- http cashier.95516.com bing
- http cashier.95516.com bingprivacy notice.pdf
- connected mcgraw hill com lausd
- education.com games play
- rushmorelm.com one time payment
- autotrader.com used cars
- b com 2nd year syllabus
- gmail.com sign in