Rev
INDUSTRIAL MAINTENANCE TECHNOLOGY
Trimester Cost Sheet
1ST Trimester
Maintenance/Tech & Activity Fees $1,185.00
Tools with Meter* (Approx.) 259.00
Industrial Maintenance TB* 220.63
Industrial Maintenance WB* 74.38
Safety Glasses 3.00
Total $1,742.01
*denotes books/supplies needed for 1st day of class
** Additional set-up fee first trimester for uniforms $35.00.
2nd Trimester
Maintenance/Tech & Activity Fees $1,185.00
Books 345.00
Tools (Approx.) 548.00
Total $2,078.00
3rd and 4th Trimester
Maintenance/Tech & Activity Fees $1,185.00
Total $2,370.00
Total Program Cost (Approximately) $6,190.01
Note: Additional tools may be required depending on options chosen.
This list of fees covers the period from September 1, 2015 to August 31, 2016. All book, tool, and supply costs are approximate and are subject to change. The actual time for completion may vary from student to student.
TCAT-Harriman is an AA/EEO employer and does not discriminate on the basis of race, color, national origin, sex, disability or age in its programs or activities. TCAT-Harriman is a TBR/EEO/AA/ADA Institution.
Tennessee College of Applied Technology at Harriman
1745 Harriman Hwy
Harriman, TN 37748
865-882-6703 or toll-free 1-800-599-9426
tcatharriman.edu
Tennessee College of Applied Technology at Harriman
Industrial Maintenance Technology
Course Outline
Average Hours (clock) of completion Term 1-Mechanical Maintenance
12 Orientation and Safety
30 Technology Foundations
30 Tolerance and Measurement
120 MECHANICAL POWER
30 Lubrication techniques
30 Bearing installation
30 Gears, gear motors, chains and rollers
30 V-belts, flat belts, and brakes
180 FLUID POWER
30 Pumps
60 Pipe bending, measurement, and threading
30 Couplings and alignment
60 Hydraulics
60 Pneumatics
432 hours Mechanical Maintenance Helper Certificate
Average Hours (clock) of completion Term 2-Industrial Maintenance
30 Related math
150 AC/DC Circuits
30 Wiring schematics
72 Soldering, Switches, Resistors, Capacitors
60 3 Phase
90 Motor controls
864 hours Maintenance Technician Apprentice Certificate
Terms 3 and 4 will conclude with the average student completing 864 hours of Electives in order to graduate with an Industrial Maintenance Technician Diploma
12 HVAC safety
18 Tools, Equip. & Fasteners
30 Heat, Pressure & Refrigeration
42 Tubing/ Piping
84 System Evacuation, Charging, & Instrument Calibration
42 Automatic Controls
78 Installation
18 EPA 608
58 Advanced controls
60 Gas furnaces
432 Heating and Air Conditioning Mechanic Helper Certificate
OR
18 Welding safety
30 Brazing
60 Introduction to welding
60 Cutting processes
156 Shielded Metal Arc
324 Tack Welder Certificate
OR
60 Blue print reading
30 Basic Machining
126 Introduction to Lathes and Milling machines
64 Bench work
50 Grinders
102 Intermediate lathes
432 Production Machine Tender Certificate
OR
216 PLC’s
156 Advanced PLC’s
60 Robotics
432 PLC certificate
INDUSTRIAL MAINTENANCE TECHNOLOGY
Suggested Tool List
Electrical/Mechanical
High-Leverage Side Cutting Lineman’s Pliers
5 pc. Cushion Grip Screwdriver set (Electrical)
Long Nose All-Purpose Tool (Crimps, cuts, strips)
18” Canvas Tool Bag with Leather Bottom
Ideal Cable Ripper
12’ x 5/8 Steel Tape Measure
8” Long Nose Pliers with Journeyman Handles
10” Tongue & Groove Pliers
TX-30 Calculator
Safety Glasses
AC Clamp on Meter
Hammer
Nut driver set with bits
Small level
Adjustable wrenches
Allen Wrenches and Hex Key Set
Pliers
¼ - 7/8 Open ended wrenches
Utility knife
Vice grips
INDUSTRIAL MAINTENANCE TECHNOLOGY
Suggested Tool List
HVAC
Crescent chrome Adjustable Wrench 8" cushion grip.
Blackhawk 3/8" dr. quick release Ratchet.
Klen 4-in-1 multi socket Driver.
Yellow Jacket 41 Series 2-valve Manifold with Hoses.
Yellow Jacket Ratchet Wrench.
C & D Valve Core removal Tool.
13 pc. SAE Hex Key Set.
10" tongue & groove Pliers.
Analog Pocket Thermometer.
Oblong Inspection Mirror.
Proto Tubing Cutter 1/8" - 1-1/8"
Snap-On/Williams IMPORT Socket
3/8'' Drive -- 13 Pieces --1/4 to 1" -- 6 Points
PROGRAM STRUCTURE
INDUSTRIAL MAINTENANCE TECHNOLOGY
STANDARDIZED CURRICULUM
COURSE LENGTH: 1,728 HOURS
Mandatory “Core” Modules
Along with core modules, complete any two modules below for a Diploma.
-----------------------
TENNESSEE TECHNOLOGY CENTERS
Mechanical & Fluid Power
Systems Maintenance
Core Module
432 Hours
Industrial Electricity
Core Module
423 Hours
Welding Technology
Elective Module
432 Hours
Programmable Logic Controllers
Elective Module
432 Hours
Heating, Ventilation, & Air Conditioning
Elective Module
432 Hours
Machine Tool Technology
Elective Module
432 Hours
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.