Turn Signal Kit

2753 Michigan Road ? Madison, Indiana 47250 ? 855-743-3427

INSTALLATION INSTRUCTIONS

Turn Signal Kit: for Kawasaki Teryx4TM

Components may be installed in locations other than where shown. Always verify wire harness length.

Horn Kit (Bracket not used)

Hazard Light Switch

Horn Switch

Turn Signal Switch

Wire Ties 4x - LED Signal

Control Box Bracket

Need help with your installation?

sales@



1-855-743-3427

? 2019 ?. All Rights Reserved.

8:00am - 9:00pm EST M-Th 8:00am - 7:00pm EST Friday 9:00am - 2:00pm EST Saturday

Read instructions and view illustrations before beginning.

Thank You For Choosing

IN-TSK-K-TRX4-004 5/14/2019

to Fuse Box

Main Harness

Front Harness

to Horn to Left Signal

to Control Box

Always consult labels on Wiring Harnesses when making connections.

to Right Signal

Rear Harness to stock Rear Harness

use provided dielctric grease on all connections

to Right Rear

to Left Rear

to License Plate Light

IN-TSK-K-TRX4-004

2

remove Hood

- Use hardware shown and secure Control Box and Horn to Bracket.

M5 x 16mm 4 each M5 Nylock Nut

IN-TSK-K-TRX4-004

Nut is pre-installed on Horn. Remove and secure to Bracket

3

- Install Bracket to location shown. - Remove stock hardware and use provided.

(passenger)

2x - M6 x 16mm

(passenger)

IN-TSK-K-TRX4-004

front

4

Turn Signal Light:

- Drill a ?3/4" hole in body and install Turn Signal Light. Repeat for remaining Turn Signal Lights. - Connect Turn Signal Lights to approriate connections on Front Harness. - Secure all Wires as needed.

Turn Signal Lights

(passenger)

IN-TSK-K-TRX4-004

If Light is hard to insert separate as shown.

- Separate LED from Gasket. - Install Gasket into hole. - Install LED into Gasket.

Gasket

LED

5

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download