BAR 2.1 DEEP BASS - JBL
[Pages:14]BAR 2.1 DEEP BASS
JBL_SB_Bar 2.1_OM_V3.indd 1
OWNER'S MANUAL
7/4/2019 3:26:40 PM
IMPORTANT SAFETY INSTRUCTIONS
Verify Line Voltage Before Use The JBL Bar 2.1 Deep Bass (soundbar and subwoofer) has been designed for use with 100-240 volt, 50/60 Hz AC current. Connection to a line voltage other than that for which your product is intended can create a safety and fire hazard and may damage the unit. If you have any questions about the voltage requirements for your specific model or about the line voltage in your area, contact your retailer or customer service representative before plugging the unit into a wall outlet.
Do Not Use Extension Cords To avoid safety hazards, use only the power cord supplied with your unit. We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets, or place heavy objects on them. Damaged power cords should be replaced immediately by an authorized service center with a cord that meets factory specifications.
Handle the AC Power Cord Gently When disconnecting the power cord from an AC outlet, always pull the plug; never pull the cord. If you do not intend to use this speaker for any considerable length of time, disconnect the plug from the AC outlet.
Do Not Open the Cabinet There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your warranty. If water accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service center.
2
JBL_SB_Bar 2.1_OM_V3.indd 2
7/4/2019 3:26:40 PM
English
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
2
9 SOFTWARE UPDATE
11
1 INTRODUCTION
4
10 RE-CONNECT THE SUBWOOFER
11
2 WHAT'S IN THE BOX
4
11 PRODUCT SPECIFICATIONS
12
3 PRODUCT OVERVIEW
3.1 SOUNDBAR 3.2 SUBWOOFER 3.3 REMOTE CONTROL
4 PLACE
4.1 DESKTOP PLACEMENT 4.2 WALL-MOUNTING
5
12 TROUBLESHOOTING
12
5
5
13 TRADEMARKS
13
6
6
14 OPEN SOURCE LICENSE NOTICE
14
6
7
5 CONNECT
7
5.1 TV CONNECTION
7
5.2 DIGITAL DEVICE CONNECTION
8
5.3 BLUETOOTH CONNECTION
8
6 PLAY
9
6.1 POWER-ON/AUTO STANDBY/AUTO WAKEUP
9
6.2 PLAY FROM THE TV SOURCE
9
6.3 PLAY FROM THE HDMI IN SOURCE
10
6.4 PLAY FROM THE BLUETOOTH SOURCE
10
7 SOUND SETTINGS
10
8 RESTORE FACTORY SETTINGS
11
3
JBL_SB_Bar 2.1_OM_V3.indd 3
7/4/2019 3:26:40 PM
1 INTRODUCTION
Thank you for purchasing the JBL Bar 2.1 Deep Bass (soundbar and subwoofer) which is designed to bring an extraordinary sound experience to your home entertainment system. We encourage you to take a few minutes to read through this manual, which describes the product and includes step-by-step instructions for setting up and getting started.
To make the most of product features and support, you may need to update the product software through the USB connector in the future. Refer to the software update section in this manual to ensure that your product has the latest software.
Designs and specifications are subject to change without notice. If you have any questions about the soundbar, installation or operation, please contact your retailer or customer service representative, or visit our website: .
2 WHAT'S IN THE BOX
Unpack the box carefully and ensure that the following parts are included. If any part is damaged or missing, do not use it and contact your retailer or customer service representative.
Soundbar
Power cord*
x 2
* Power cord and plug type vary region. HDMI cable
Wall-mounting kit
Subwoofer
Product information quantity & wall-mounting template
Remote control (with 2 AAA batteries)
4
JBL_SB_Bar 2.1_OM_V3.indd 4
7/4/2019 3:26:40 PM
English
3 PRODUCT OVERVIEW
3.1 Soundbar
Controls
1 23
3.2 Subwoofer
4
1. (Power) ? Switch on or to standby
2. -/+ (Volume) ? Decrease or increase the volume ? Press and hold to decrease or increase the volume continuously ? Press the two buttons together to mute or unmute
3. (Source) ? Select a sound source: TV (default), Bluetooth or HDMI IN
4. Status display
Connectors
1 2345
1
2
1. ? Connection status indicator
Solid white Flashing white
Connected to the soundbar Pairing mode
Solid amber
Standby mode
2. POWER ? Connect to power
1. POWER ? Connect to power
2. OPTICAL ? Connect to the optical output on your TV or digital device
3. USB ? USB connector for software update ? Connect to a USB storage device for audio play (for US version only)
4. HDMI IN ? Connect to the HDMI output on your digital device
5. HDMI OUT (TV ARC) ? Connect to the HDMI ARC input on your TV
JBL_SB_Bar 2.1_OM_V3.indd 5
5
7/4/2019 3:26:40 PM
3.3 Remote control
1 2 3 4 5 6
7
4 PLACE
4.1 Desktop placement
Place the soundbar and subwoofer on a flat and stable surface. Make sure that the subwoofer is at least 3 ft (1 m) away from the soundbar, and 4" (10 cm) away from a wall.
> 10cm/4" 1m/3ft
1. ? Switch on or to standby
2. TV ? Select the TV source
3. (Bluetooth) ? Select the Bluetooth source ? Press and hold to connect another Bluetooth device
4. ? Select the bass level for subwoofer: low, middle, or high
5. HDMI ? Select the HDMI IN source
6. + / ? Increase or decrease the volume ? Press and hold to increase or decrease the volume continuously
7. (Mute) ? Mute/unmute
NOTES: -- The power cord shall be properly connected to power. -- Do not place any objects on the top of the soundbar or subwoofer. -- Make sure that the distance between the subwoofer and the soundbar
is less than 20 ft (6 m).
6
JBL_SB_Bar 2.1_OM_V3.indd 6
7/4/2019 3:26:41 PM
English
4.2 Wall-mounting
5 CONNECT
5.1 TV connection
Connect the soundbar with your TV through the supplied HDMI cable or an optical cable (sold separately).
Through the supplied HDMI cable An HDMI connection supports digital audio and video with a single connection. HDMI connectivity is the best option for your soundbar.
1
8 mm/ 0.31"
4mm/ 0.16"
30 mm/1.18"
2 3 4
1. Preparation:
a) With a minimum distance of 2" (50mm) from your TV, stick the supplied wall-mounting template to a wall by using adhesive tapes.
b) Use your ballpen tip to mark the screw holder location. Remove the template.
c) On the marked location, drill a 4 mm/0.16" hole. Refer to Figure 1 for the screw size.
2. Install the wall-mounting bracket.
3. Fasten the screw onto the back of the soundbar.
4. Mount the soundbar.
NOTES: -- Make sure that the wall can support the weight of the soundbar. -- Install on a vertical wall only. -- Avoid a location under high temperature or humidity. -- Before wall-mounting, make sure that cables can be properly
connected between the soundbar and external devices. -- Before wall-mounting, make sure that the soundbar is unplugged from
power. Otherwise, it may cause an electric shock.
HDMI OUT (TV ARC)
HDMI (ARC)
1. Connect the soundbar with your TV by using the supplied HDMI cable.
2. On your TV, check that HDMI-CEC and HDMI ARC have been enabled. Refer to the owner's manual of your TV for more information.
NOTES: -- Full compatibility with all HDMI-CEC devices is not guaranteed. -- Contact your TV manufacturer if you have problems with the HDMI-
CEC compatibility of your TV. Through an optical cable
OPTICAL
OPTICAL
? Connect the soundbar with your TV by using an optical cable (sold separately).
JBL_SB_Bar 2.1_OM_V3.indd 7
7
7/4/2019 3:26:41 PM
5.2 Digital device connection
1. Make sure that you have connected your TV to the soundbar through the HDMI ARC connection (See "Through the supplied HDMI cable" under "TV connection" in the "CONNECT" chapter).
2. Use an HDMI cable (V1.4 or later) to connect the soundbar with your digital device, such as a set-top box, DVD/Blu-ray player or game console.
3. On your digital device, check that HDMI-CEC has been enabled. Refer to the owner's manual of your digital device for more information.
HDMI IN
2. To select Bluetooth source, press on the soundbar or on the remote control. "BT PAIRING": Ready for BT pairing
3. On your Bluetooth device, enable Bluetooth and search for "JBL Bar 2.1" within three minutes. The device name is displayed if your device is named in English. A confirmation tone is heard.
To reconnect the last paired device
Your Bluetooth device is retained as a paired device when the soundbar goes to standby mode. Next time you switch to the Bluetooth source, the soundbar reconnects the last paired device automatically.
To connect to another Bluetooth device
HDMI OUT
3S
...
NOTES: -- Contact your digital device manufacturer if you have problems with the
HDMI-CEC compatibility of your digital device.
5.3 Bluetooth connection
Through Bluetooth, connect the soundbar with your Bluetooth device, such as a smartphone, tablet and laptop.
Settings Bluetooth
Bluetooth
DEVICES
JBL Bar 2.1
Now Discoverable
Connected
< 10 m / 33 ft
1. In the Bluetooth source, press and hold on the soundbar or on the remote control until "BT PAIRING" is displayed.
The previously paired device is cleared from the soundbar. The soundbar enters the Bluetooth pairing mode.
2. Follow the Step 3 under "Connect a Bluetooth device".
? If the device has ever been paired with the soundbar, first unpair "JBL Bar 2.1" on the device.
NOTES: -- The Bluetooth connection will be lost if the distance between the
soundbar and Bluetooth device exceeds 33 ft (10 m). -- Electronic devices may cause radio interference. Devices that generate
electromagnetic waves must be kept away from the Soundbar, such as microwaves and wireless LAN devices.
Connect a Bluetooth device 1. Press to switch on (See "Power-on/Auto standby/Auto
wakeup" in the "PLAY" chapter).
8
JBL_SB_Bar 2.1_OM_V3.indd 8
7/4/2019 3:26:41 PM
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- vsb200 user manual 071509 america s 1 lcd hdtv company
- quick start guide america s 1 lcd hdtv company vizio
- user u al manual america s 1 lcd hdtv company vizio
- hw t450 spec sheet
- hw q950t spec sheet
- catalog of stc and iic ratings for wall and floor ceiling
- sound transmission class guidance hud
- sound bar operating instructions gb sony
- user manual model sb2021n h6 america s 1 lcd hdtv company
- user manual v21 h8r eng america s 1 lcd hdtv company