ARCAT, Inc.
SECTION 09 67 00EPOXY FLOORINGDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2018 - 2018 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** Life Paint; epoxy flooring products.This section is based on the products of Life Paint, which is located at:12927 Sunshine Ave.Santa Fe Springs, CA 90670Tel: 562-944-6391Fax: 562-946-5921Email: request info (lifepaint@)Web: | [ Click Here ] for additional information.The Life Deck Epoxies are manufactured with the finest raw materials available. Staying on the leading edge of technology, Life paint produces water based and conventional 100% solids epoxies with outstanding chemical resistance and hot tire pick resistance for the demanding needs of today's consumer. From airplane hangers to warehouses and showrooms floors to your home garage, there is a Life Deck epoxy product for you.
GENERAL
SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
Epoxy pigmented floor system.
Broadcast chip epoxy floor system.
Quartz epoxy floor system.
RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
Section 03 30 00 - Cast-in-Place Concrete.
Section 03 01 30.61 - Resurfacing of Cast-in-Place Concrete.
Section 07 16 13 - Polymer Modified Cement Waterproofing.
REFERENCES
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
ASTM International (ASTM):
ASTM D 445 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity).
ASTM D 638 - Standard Test Method for Tensile Properties of Plastics.
ASTM D 648 - Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position.
ASTM D 790 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials.
ASTM D 1544 - Standard Test Method for Color of Transparent Liquids (Gardner Color Scale).
ASTM D 5178 - Standard Test Method for Mar Resistance of Organic Coatings.
ASTM D 2240 - Standard Test Method for Rubber PropertyDurometer Hardness.
ASTM D 3418 - Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry.
ASTM D 4541 - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers.
SUBMITTALS
Submit under provisions of Section 01 30 00 - Administrative Requirements.
Product Data: Manufacturer's data sheets on each product to be used, including:
Preparation instructions and recommendations.
Storage and handling requirements and recommendations.
Installation methods.
Shop Drawings:
** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square representing actual product, color, and patterns.
QUALITY ASSURANCE
Manufacturer Qualifications: Minimum 5 year experience manufacturing similar products.
Installer Qualifications: Minimum 2 year experience installing similar products.
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
Finish areas designated by Architect.
Do not proceed with remaining work until workmanship is approved by Architect.
Refinish mock-up area as required to produce acceptable work.
PRE-INSTALLATION MEETINGS
Convene minimum two weeks prior to starting work of this section.
DELIVERY, STORAGE, AND HANDLING
Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.
Handling: Handle materials to avoid damage.
PROJECT CONDITIONS
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
Do not apply system components in temperatures below 50 degree F (10 degrees C) or temperatures above 95 degree F (35 degrees C).
SEQUENCING
Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.
WARRANTY
Warranty: Provide manufacturer's standard limited warranty.
PRODUCTS
MANUFACTURERS
Acceptable Manufacturer: Life Paint, which is located at: 12927 Sunshine Ave.; Santa Fe Springs, CA 90670; Tel: 562-944-6391; Fax: 562-946-5921; Email: request info (lifepaint@); Web: |
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
Substitutions: Not permitted.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
** NOTE TO SPECIFIER ** Delete if not required.
EPOXY PIGMENTED FLOOR SYSTEM
System: LD3100 100% Solids Epoxy Floor System as manufactured by Life Paint Company.
** NOTE TO SPECIFIER ** Delete primer not required.
Primer: Life Deck 1200 primer at a rate of 300 square feet per gallon (7.2 square meter per liter).
Primer: Life Deck 25 series primer at a rate of 250 to 350 square feet per gallon (6 to 8.4 square meter per liter).
Primer: Life Deck 14 series primer at a rate of 600 to 800 square feet per gallon (14.4 to 19.2 square meter per liter).
Base Coat: LD3100 Pigmented coat at a rate of 200 square feet per gallon (4.8 square meter per liter).
** NOTE TO SPECIFIER ** Delete pigment color provision not required.
Pigment Color: As selected from manufacturer's standard colors.
Pigment Color: Custom color.
** NOTE TO SPECIFIER ** There are several choices for a Top Coat depending on gloss desired, chemical and abrasion resistance and desired look. Refer to manufacturer's literature.If application is interior, apply LD 31 Series Clear Epoxy. If application is exterior, apply LD CRU (Chemical Resistant Urethane). Delete top coat not required.
Top Coat: Clear Epoxy LD3100 at approximately 200 square feet per gallon (4.8 square meter per liter).
Top Coat: U.V. Protection Polyurethane CRU at approximately 200 square feet per gallon (4.8 square meter per liter).
** NOTE TO SPECIFIER ** Top with the LD2009 Polyurea for the ultimate in chemical and scratch resistance. Delete if not required.
Top Coat (Exterior): LD 2009 Polyurea at a rate of 200 to 250 square feet per gallon (4.8 to 6 square meter per liter). Apply 2 coats.
** NOTE TO SPECIFIER ** Decorative Broadcast Chip Floor.A designer floor that produces great looks and chemical resistance. Top with the LD2009 Polyurea for the ultimate in chemical and scratch resistance. Can be applied with either our Life Deck 100% solids or Life Deck water based epoxies. Delete if not required.
BROADCAST CHIP FLOOR SYSTEM
** NOTE TO SPECIFIER ** Liquid Granite is an epoxy concrete floor coating system with acrylic chip sprinkled into the pigmented base coat and sealed with clear epoxy or urethane top coat. Liquid Granite is designed to be used on showroom floors, restaurant floors, garage floors, recreation rooms, washrooms and kitchens. Liquid Granite is a decorative, durable and chemical resistant coating which makes it perfect for residential, commercial and industrial applications. Delete if not required.
System: Liquid Granite Floor as manufactured by Life Paint Company.
Primer: LD14 at approximately 600 to 800 square feet (55.7 to 74.3 square meters) per batch.
** NOTE TO SPECIFIER ** Delete base coat and chip color combination not required.
Base Coat Color and Color Paint Chip Combinations: LD 14 Travatan at the rate of 200 to 250 square feet per gallon (4.8 to 6 square meter per liter).
Chip Color: Taupe Tweed.
Chip Color: Sandstone.
Chip Color: Atascadero.
Chip Color: Niagra.
Chip Color: Granite.
Chip Color: Salt & Pepper.
Chip Color: Storm Cloud.
Base Coat Color and Color Paint Chip Combinations: LD 14 Base Coat: Cape Cod Gray at the rate of 200 to 250 square feet per gallon (4.8 to 6 square meter per liter).
Chip Color: Shadow.
Chip Color: Forest.
Chip Color: Dove Gray.
Base Coat Color and Color Paint Chip Combinations: LD 14 Base Coat: Deep Tan at the rate of 200 to 250 square feet per gallon (4.8 to 6 square meter per liter).
Chip Color: Autumn.
Chip Color: Mocha Tweed.
** NOTE TO SPECIFIER ** If application is interior, apply LD 31 Series Clear Epoxy. If application is exterior, apply LD CRU (Chemical Resistant Urethane). Delete top coat not required.
Top Coat: Clear Epoxy LD3196 at approximately 150 to 200 square feet per gallon (3.6 to 4.8 square meter per liter).
Top Coat: U.V. Protection Polyurethane CRU at approximately 200 square feet per gallon (4.8 square meter per liter).
** NOTE TO SPECIFIER ** Top with the LD2009 Polyurea for the ultimate in chemical and scratch resistance. Delete if not required.
Top Coat (Exterior): LD 2009 Polyurea at a rate of 200 to 250 square feet per gallon (4.8 to 6 square meter per liter). Apply 2 coats.
** NOTE TO SPECIFIER ** Colored Quartz Decorative Broadcast Quartz Floor.Life Deck Ceramic coated Colored Quartz is embedded into the epoxy clear coat forming a thick, chemical resistant, floor for high traffic areas. The quartz floor system is extremely resistant to heavy objects. Top with Life Deck epoxy LD-2009 Polyurea to make the coat a UV resistant floor sealer. The Colored Quartz Floor System is designed to be used on showroom floors, restaurant floors, garage floors, recreation rooms, washrooms and kitchens. It is a decorative, durable and chemical resistant coating which makes it perfect for residential, commercial and industrial applications. It is an epoxy floor coating system with ceramic coated colored quartz spread onto a clear base coat and sealed with a clear coat. Delete if not required.
QUARTZ FLOOR SYSTEM
System: Colored Quartz Floor as manufactured by Life Paint Company.
Primer: LD 1200 epoxy primer at the rate of 300 square feet per gallon (7.2 square meter per liter).
** NOTE TO SPECIFIER ** Delete base coat not required.
Base: 25-96 clear epoxy at the rate of 300 square feet per gallon (7.2 square meter per liter).
Second coat at the rate of 200 square feet per gallon (4.8 square meter per liter) and broadcast of colored quartz.
Base: LD 3100 pigmented epoxy base at the rate of 175 to 225 square feet per gallon (4.2 to 5.4 square meter per liter).
Color Chips: Quartz in premixed color as selected by Architect.
** NOTE TO SPECIFIER ** Delete top coat not required.
Top Coat (Interior): Interior: 25-96 at a rate of 200 to 250 square feet per gallon (4.8 to 6 square meter per liter). Apply 2 coats.
Top Coat (Interior): 25-96 at a rate of 200 to 250 square feet per gallon (4.8 to 6 square meter per liter). Apply 2 coats.
Top Coat (Interior): LD 3100 Epoxy at approximately 200 to 250 square feet per gallon (4.8 to 6 square meter per liter). 2 coats.
Top Coat (Exterior): UV Resistant Coating. 2010 at a rate of 200 to 250 square feet per gallon (4.8 to 6 square meter per liter). Apply 2 coats.
Top Coat (Exterior): LD 2003 CRU (Chemical Resistant Urethane) at approximately 200 to 250 square feet per gallon (4.8 to 6 square meter per liter). Apply 2 coats.
Top Coat (Exterior): LD 2009 Polyurea at a rate of 200 to 250 square feet per gallon (4.8 to 6 square meter per liter). Apply 2 coats.
** NOTE TO SPECIFIER ** Waterbased Epoxy: High Solids water based epoxy coatings. Longer pot life, water clean up, water thinnable, & chemical resistant. Forms a long lasting coating for use on garages, restaurants, architectural designs, commercial and industrial applications. Life Deck Specialty Coatings manufactures 3 different water based epoxies: Life Deck 14 Series, Life Deck 25 Series, and Life Deck 25-96 Series. The 14 Series has a 4:1 mix ratio. It's technology is a blend of water based material and 100% solids. It has a very high gloss and 100% solids application "feel" to it. The 14 Series can create a high build and is excellent for full broadcast chip systems. The 25 Series has a 2:1 mix ratio. It's technology is based completely on water based raw materials. The 25 Series has a pot life up to 4 hours and can be used as a primer. The 25 Series comes in stock colors and a tinting base system for a full range of colors in the Life Deck coloring system. The 25-96 Epoxy System is similar to the normal Life Deck 25 Series Epoxy System but is a 3:1 system. Delete if not required.
WATER BASED EPOXIES
** NOTE TO SPECIFIER ** The 14 Series exhibits 100% solids epoxy type characteristics with it's high build and ultra high gloss finish. It has a good working pot life and is excellent for garages, industrial shops, and warehouses. Delete if not required.
Life Deck 14 Series Water Based 4:1:
Physical Properties:
Type: 2 component water borne epoxy.
Pot Life: 30 minutes at 77 degree F (25 degree C).
Diluent: Water (Add to Part "A" only).
Flash Point: 140 degree F (60 degree C).
Mixture Solid Content: 56% by weight.
Maximum V.O.C.: 95 grams per liter.
Viscosity: 95 5 KREBS units at 77 degree F (25 degrees C).
Pencil Hardness: 2H.
Gloss White Stain Resistance.
Exposure Resistance:
Salt Water: Discoloration after 12 weeks.
10% NaOH: No attack.
10% H2SO4: Blistering after 10 weeks.
Xylene: No attack.
Performance:
Sheen: Gloss.
Chemical resistant.
High build.
Low VOC.
Excellent for paint chip application.
Self-priming.
** NOTE TO SPECIFIER ** The 25 Series is a very easy to use, water based epoxy with premium performance. It is available in stock colors as well as custom colors. Excellent for garages, industrial shops, and warehouses and has a long pot life. Delete if not required. Delete if not required.
Life Deck 25 Series Water Based 2:1:
Physical Properties:
Type: Two component water base epoxy.
Diluent: Water.
Solids Content: 53 to 57% by weight. 41 to 55% by volume.
Viscosity: 80-90 KREBS units.
Flash Point: > 150 degree F (66 degree C).
Maximum V.O.C.: 50 grams per liter.
Performance:
Chemical resistant.
4 hour pot life.
Quick dry.
Low VOC.
Self-priming.
** NOTE TO SPECIFIER ** 25-96 is a clear water based epoxy for sealing interior concrete floors and/or application over broadcast systems. Very easy to use exhibiting a long pot life and incredible clarity. The 25-96 is an excellent product to use for quartz broadcast to reduce labor times. Delete if not required.
Life Deck 25-96 Clear Water Based 3:1:
Physical Properties:
Type: Two component water base epoxy.
Diluent: Water.
Solids Content: 48 to 50% by weight. 45 to 47% by volume.
Viscosity: 80-90 KREBS units.
Flash Point: > 150 degree F (66 degrees C).
Maximum V.O.C.: 50 grams per liter.
Performance:
Pot Life, Hour: 4.
Quick Dry.
Low VOC.
** NOTE TO SPECIFIER ** Delete if not required.
100% SOLIDS EXPOXY
** NOTE TO SPECIFIER ** The 31 Series 100% solids epoxy is excellent for most any interior concrete floor application. It's been applied in areas such as garage floors to large arenas and hangars. It creates an excellent base for broadcasting colored paint chips. Delete if not required.
Life Deck LD31 100% Solids 2:1:
Physical Properties:
Viscosity (ASTM D-445-83, Brookfield. RVTD, Sprindle 4): 1030 cps.
Gel Time (Techne GT-4 Gelation Timer): 55 (150 mass/minute).
Tensile Strength (ASTM D-638-86). 7400 psi (51,021 kPa).
Tensile Elongation (ASTM D-638-86): 4.9 %
Heat Deflection at 264 psi (ASTM-D-648)*: 117 degrees F (47 degrees C).
Shore D Hardness (ASTM D-2240-86): 82.
Mar Resistance (ASTM D-5178-91): 1.35 kg.
Glass Transition Temperature (ASTM-D-3418-82): 124 degree F (51 degrees C).
Color (ASTM D-1544-80): > 1 Gardner.
Thin Film Set Times at 70 degree F (21 degrees C) (BK Drying Recorder): 4.5 hours.
Flexural Strength (ASTM D-790-88): 12200 psi (84,116 kPa).
Compressive Strength (ASTM 695-85): 11800 psi (81,358 kPa).
Compressive Modulus (ASTM 695-85): 326,000 psi (2,247,690 kPa).
*Properties determined after 7 days cure at 77 degrees F (25 degrees C).
Performance:
Chemical resistant.
High build.
0 VOC.
Excellent for decorative chip application.
** NOTE TO SPECIFIER ** LD3770 is a 100% Solids, multi-functional Novolac epoxy system. It is designed for strong chemical and solvent resistance and constant temperature exposure of greater than 225 degrees F (107 degrees C). The LD3770 can withstand a constant immersion of 70% Sulfuric Acid for 90+ days before failure and 50% Sodium Hydroxide immersion for 30 days. It is available pigmented or as a clear coat. Delete if not required.
Life Deck LD3770 Novalac:
Type: Coating. Minimum 300 sf per gallon.
Type: Mortar: Mix 2 to 5 parts of a washed and kiln dried aggregate, by volume, to 1 part of mixed LD 3770 and mix until uniform in consistency.
Primer: LD1200, or LD12Vapor Seal.
Performance:
Dry Time 5 Hrs @ 77 degrees F (25 degrees C).
Pencil Hardness: 3H.
Impact Resistance; Direct/Reverse 35/12 In-Lb.
Abrasion Resistance (1000 Cycle, Weight Loss Grams): 0.03.
Chemical Resistance:
Sulfuric Acid: 10% > 90 Days, 30% > 90 Days, 50% > 90 Days, 70% > 90 Days.
Hydrochloric: 10% 24 Hours.
Sodium Hydroxide: 50% 30 Days.
Phosphoric Acid: 10% 24 Hours, 30% 24 Hours.
Ammonia: 30% 30 Days.
Ethanol: 100% 3 Hours.
Methanol: 3 Hours.
Cellosolve: 24 Hours.
Acetone: 24 Hours.
MEK: < 3 Hours.
Trichloroethylene: 3 Days.
Toluene: 24 Hours.
JP-4 Jet Fuel: > 24 Hours.
Lactic Acid: 10% 7 Days.
Acetic Acid: 10% < 24 Hours.
** NOTE TO SPECIFIER ** A high quality 100% Solids epoxy system for commercial, industrial, and architectural use. Excellent flow for roller or squeegee application. High gloss and high build. Life Deck coatings epoxy offers two 100% solids primers for concrete floors. The Life Deck epoxy LD1200 and the Life Deck LD12VAPOR (Vapor Seal.) The Vapor Seal withstands much great vapor pressure when moisture is present in the concrete floor. The LD3100 top coat is available in our standard Life Deck Specialty Coatings colors and clear. It works great as a stand alone finish or you can apply colored chips, colored quartz, or metallics to create beautiful designs and floors. The Life Deck 100% solids epoxy product line provides a durable waterproof coat that will last for years. Delete if not required.
PRIMER
** NOTE TO SPECIFIER ** 100% Solids with excellent adhesion to concrete. High build to fill small cracks and create an even surface. A 4 hour quick dry product (LD1242FD) is available. Delete if not required.
Life Deck LD12 100% Solids 2:1:
Physical properties:
Chemical Composition: Modified Bisphenol, Modified Arnidoamine.
Viscosity (ASTM D-445-83, Brookfeild, RVTD, Spindle 4): 1600-1800 cps
Gel Time (Techne GT-4 Gelation Timer): 90 @77 degrees F (25 degrees C): 150 mass/minutes.
Tensile Strength (ASTM D-638-86): 8700psi (59,984 kPa).
Tensile Elongation (ASTM D-638-86): 8.6%.
Shore D Hardness (ASTM D-2240-86): 81.
Glass Transition Temperature (ASTM-D-3418-82): 126 degrees F (52 degrees C).
Thin Film Set Time (BK Drying Recorder): 7 hours @70 degrees F (21 degrees C).
Flexural Strength (ASTM D-790-88): 13,600 psi (93,769 kPa).
Compressive Modulus (ASTM D-695-85): 279,000 psi (1,923,637kPa).
Compressive Strength @ yield (ASTM D-695-85): 10,900 psi (75,152 kPa).
Performance:
USDA Approved.
100% solids.
Low viscosity.
Chemical resistant.
High build.
Moisture tolerant.
Convenient 2:1 Mix; A: B=2:1.
High strength.
Superior adhesion.
** NOTE TO SPECIFIER ** LD12VAPOR Vapor Seal epoxy is used for concrete that has high vapor emission. Prevents constant moisture from film release. It has an ability to reduce the hydrostatic pressure emitted by the floor from 12 lbs per 1000 square feet to less than 1 lb. Life Paint Vapor seal can even cure underwater without affecting its adhesion. Delete if not required.
Life Deck LD12VAPOR 100% Solids 2:1 Vapor Seal:
Application: Covers up to 300 square feet per gallon under normal conditions, which will achieve 5.2 dry mils (.013 mm). May be applied at a heavier rate to achieve a higher build system or to accommodate the broadcasting of aggregates.
Physical Properties:
Pencil Hardness: 2H.
Persoz Hardness, seconds: 200.
Cross-cut Adhesion: 5A.
Impact Resistance (Direct/Reverse), in lb.: 30 / 2.
Elcometer Pull-off Adhesion (ASTM D4541): 553 psi (3812 kPa) (average).
** NOTE TO SPECIFIER ** Delete if not required.
CLEAR SEALERS
** NOTE TO SPECIFIER ** 2003 CHEMICAL RESISTANT URETHANE (CRU) The 2003 CRU is an industrial grade 2 component urethane designed for interior and exterior use where heavy chemical resistance is needed. It is applicable in airplane hangars, chemical plants, manufacturing plants, and anywhere high chemical resistance and abrasion is needed. It can be top coated over any of our epoxy systems and most Life Deck concrete resurfacing systems. It is available in most stock colors, clear gloss, and a clear satin finish.2009 Polyurea The 2009 is an industrial grade 2 component polyurea designed for interior and exterior use where heavy chemical resistance and abrasion is needed. It's fast dry time allows for a 2 coat application in one day and can be used over any of our Life Deck epoxies and epoxy systems. Delete if not required.
2003 Chemical Resistant Urethane (CRU):
Type: Two component urethane.
2009 Polyurea:
Type: Two component polyurea.
** NOTE TO SPECIFIER ** Colored Paint Chips: Broadcast colored paint chips for a granite like skid resistant finish. Multiple color combinations available, see paint chip color card. These are high grade quality chips that do not soften from solvenated clear coats.Safe-D Grip: A special additive for increasing ant-slip. It creates a mildly textured surface without adding any color to the finish.Colored Quartz: Broadcast colored quartz for a beautiful skid resistant finish. Solid colors available, see color card. This is a high grade quartz that does not change color from UV light.
DECORATIVE DESIGN AND ANTI-SKID ADDITIVES
** NOTE TO SPECIFIER ** Delete if not required.
Colored Paint Chips:
** NOTE TO SPECIFIER ** Delete if not required.
Safe-D Grip:
** NOTE TO SPECIFIER ** Delete if not required.
Colored Quartz: Ceramic covered quartz.
** NOTE TO SPECIFIER ** Delete color not required. Refer to Quartz floor system.
Chip Color: Taupe Tweed.
Chip Color: Sandstone.
Chip Color: Atascadero.
Chip Color: Niagra.
Chip Color: Granite.
Chip Color: Salt & Pepper.
Chip Color: Storm Cloud.
Chip Color: Shadow.
Chip Color: Forest.
Chip Color: Dove Gray.
Chip Color: Autumn.
Chip Color: Mocha Tweed.
Typical Composition:
Silica Sand: Approx. 97.5%.
Resin: Approx. 2.0%.
Colorant: Approx. 0.5%.
Physical Properties:
Hardness: 6.5 to 7 MOHS hardness scale.
Bulk Density: 90 to 100 lbs/cubic feet.
Specific Gravity: 2.65.
** NOTE TO SPECIFIER ** Delete if not required.
CRACK AND PATCHING REPAIR
** NOTE TO SPECIFIER ** Life Deck 7200P Series is designed to be used on concrete, metal, wood, masonry or where a tough yet flexible epoxy paste is required. Uses include patching surface cracks on concrete floors prior to application of a floor coating or as a general purpose patch on concrete, block or wood to fill small voids before coating with other products. Delete if not required.
Patch Repair: Life Deck 7200P Series:
Type: 2 component, heavy viscosity, 100% solids, flexible epoxy patching compound.
Physical properties:
Gel Time (100g mass/minute): 35.
Tensile Strength (psi): 1530 (10,549 kPa).
Modulus (psi): 33800 (233,042 kPa).
Tensile Elongation %: 55.
Shore D Hardness: 45.
Thin Film Set Timers, hours (70 degrees F (21 degrees C)): 7 hour.
Pot Life (77 degrees F (25 degrees C)): 35 minutes.
** NOTE TO SPECIFIER ** 7200 CRACK PATCH 1:1 A 100% solids crack patch gel. Mix parts A and B and butter into the cracks to fill and give a seamless look over a cracked floor. Delete if not required.
Crack Repair: 7200 Crack Patch 1:1.
EXECUTION
EXAMINATION
Do not begin installation until substrates have been properly prepared.
Surface must be structurally sound, dry and free of oil, grease, curing agents, dirt, dust or any other foreign material that may prevent proper adhesion.
Test the concrete slab for efflorescence, high levels of alkalinity, and/or high levels of moisture present (greater than 4.5 lbs) in the slab.
** NOTE TO SPECIFIER ** Failing to adhere to these strict guidelines can result in product delamination, discoloration, blistering, or all together failure of the coating system. Testing is the responsibility of the applicator. Life Paint bears no responsibility for failures due to any of the conditions.
Calcium chloride tests shall be conducted to determine if the concrete is sufficiently dry for an epoxy flooring installation in accordance with the latest edition of ASTM F 1869, Standard Test Method for Measuring Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride.
If moisture is greater than 4.5 lbs. apply LD12 Vapor Seal.
The concrete shall be at least 2500 psi and feel like 30-grit sandpaper. The concrete shall be porous and be able to absorb water.
** NOTE TO SPECIFIER **Delete if existing concrete.
A minimum of 28 days cured is required on all freshly poured concrete slabs
If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
PREPARATION
Clean surfaces thoroughly prior to installation.
Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
Prepare the surface by sanding, grinding, water blasting, sand blasting or shot blasting. Clean surface entirely with TSP and rinse completely with water several times. Remove mildew or algae using 50/50 blend of household bleach and water, rinse thoroughly.
Cracks shall be filled with LD7200 Epoxy Paste according to the manufacturer's instructions.
** NOTE TO SPECIFIER ** Broadcast chip flooring system only. Delete if not required.
Expansion joints shall be honored and filled with 7100 Epoxy Joint Filler or equivalent.
** NOTE TO SPECIFIER ** Epoxy quartz flooring system only. Delete if not required.
Expansion joints shall be honored and filled with LD7200 Epoxy Paste or Gel.
INSTALLATION
Install in accordance with manufacturer's instructions and approved submittals.
PROTECTION
Protect installed products until completion of project.
Prohibit light traffic on the finished floor for 48 hours after installation. Avoid heavy traffic and abrasion, and chemical exposure for 5 days.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.