NEW



Contents:

Inverter DC Tig Welder

Inverter DC Arc Welder

Inverter DC Tig/MMA Welder

Inverter DC Multi-functions welder

Inverter AC/DC Multif-functions welder

Inverter DC Pulse Tig Welder

Inverter AC/DC Tig Welder

Inverter AC/DC Pulse Tig &MMA Welder

Inverter Mig/Mag Welder

DC Compact Mig/Mag Welder

DC Separate Mig/Mag Welder

AC Spot Welder

Inverter DC Air Plasma Cutter

Conventional Air Plasma Cutter

Separate Wire Feeder

Mini Inverter DC TIG Welder

Model:TIG-160S ;TIG-200S;TIG-250S

[pic]

Description:

1. Advanced inverter technology, high working frequency, reduced size and weight, easy to carry.

2. HF pressure increasing arc initiation and pulsation thermal arc initiation design, excellent arc initiation performance, ample welding current, super cost/performance ratio.

3. Unique output characteristics design, more suitable for filter wire welding, excellent weld appearance.

4. Wide working voltage range, strong adaptability to electricity network, more suitable for factory continuous operation.

5. Simple structure, good process, reliable and durable, easy for maintenance.

6. Be able to weld carbon steel, stainless steel, copper and titanor metal, etc.,

7. Complete accessories: welding torch, welding cable, earth clamp, carton box

|Main technical parameters |TIG-160S |TIG-200S |TIG250S |

|Input power voltage (v): |AC 220+10% |AC 220+10% |AC 220+10% |

|Frequency (KHZ): |100 |100 |100 |

|Rate input power capacity (KVA) | 4.0 |5.5 |7.0 |

|No-load voltage (V): |43 |43 |43 |

|Output current range (A): |5-160 |5-200 |5-250 |

|Rated output voltage (V): |16.4 |18 |20 |

|Duty cycle (%): |40 |40 |40 |

|Efficiency (%): |85 |85 |85 |

|Insulation class: |F |F |F |

|Weight (kg): |8.5 |9.5 |10.5 |

|Measurement (cm): |43 x 21 x 36 |43 x 21 x 36 |43 x 21 x 36 |

|Protection class : |IP21 |IP21 |IP21 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Mini Inverter DC MMA Welder

Model:ARC-140;ARC-160;ARC-200

For pictures , please visit our website

pact in volume, light in weight and power saved

2. Easy to arc initiation, resistance to interference , good force adjustment

3. Stable welding current, low welding spatter

4. Good welding result, deep welding pool, high intension

5. Protection for  over current

6. Automatic voltage pulsation, compensation capability.

7. Applicable for various acid and basic welding electrodes 

8. Down hand cellulose electrodes

plete accessories: welding cable, earth clamp, welding holder, carton box

|Specification |ARC160 |ARC200 |

|Power voltage (V) |220+10% |220+10% |

|Rated output volt.(V) |26.4 |28 |

|Output current (A) |30-160 |30-200 |

|No-load loss(W) |40 |40 |

|Power factor |0.93 |0.93 |

|Housing Protection grade |IP21 |IP21 |

|Insulation grade |B |B |

|Duty cycle (%) |40 |40 |

|Efficiency(%) |85 |85 |

|Weight(kg) |5.5 |8 |

|Dimensions(mm) |290×132×203 |375×155×240 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Inverter DC ARC Welder

Model:ZX7-315C;ZX7-400C;ZX7-500C

For pictures , please visit our website

1.Frequency is to 20KHZ,high working efficiency, reduced size and weight,

easy to carry.

2. Simple structure, good process, reliable and durable, easy for maintenance.

3. Unique VRD protect electricity, safety.

4. MMA IS easy arc initiation, stable current and has no noise.

5. Fast, small splash, do not stick to slip, excellent weld appearance.

6. Adapt short arc initiation, accurately control current and protect tungsten needle.

7. Wide input voltage, strong adaptability.

8. MINI design, complete capability, especially for small project and family

9. 500A machine or above can be used air carbon arc gouging.

plete accessories : welding cable, earth clamp, welding holder, carton box

The data in the above table is only for reference. Please subject to the nameplate on the device.

Mini Inverter DC TIG/MMA Welder

Model: WS-160; WS-200;WS-250

[pic][pic]

1.Advanced MOSFET inverter technology, high working efficiency, reduced size and weight, easy to carry.

2. Simple structure, good process, reliable and durable, easy for maintenance.

3. HF pressure increasing arc initiation pulsation thermal arc initiation design, excellent arc initiation performance.

5. Double purposes. Suitable for TIG and MMA of various metals.

6. Unique output characteristics protection design, more suitable for filler wire

welding and the welding point is not black, excellent weld appearance.

7. Minimum welding current is to 5-8A,stable arc suitable for stainless steel plate welding.

8. MMA IS easy arc initiation, stable current and has no noise.

9. Fast, small splash, do not stick to slip, excellent weld appearance.

10. Wide working voltage range, strong adaptability to electricity network, high duty cycle

11.Portable, easy to carry, suitable for DIY and family use.

plete accessories: welding torch, welding cable, earth clamp, welding holder, carton box

|Specification |WS-160 |WS-200 |WS-250 |

|Rated Input Voltage (V) | AC 220V+10% |AC 220V+10% | AC 380V+10% |

|Rated Duty Cycle (%) |40 |40 |0 |

|Input Capacity (KVA) |4 |5.5 |6 |

|Rated welding current |TIG:160A |TIG:200A |TIG:250A |

| |MMA:160A |MMA:200A |MMA:200A |

|No-load voltage |DC55V |DC55V |DC55V |

|Gas retardation time |0.5-15S |0.5-15S |0.5-15S |

|Efficiency |80% |80% |100KHZ |

|Weigh t(kg) |8 |12 |12 |

|Dimensions (mm) |380×160×260 |490×180×280 |670×340×630 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Inverter DC TIG/MMA Welder

Model: ZX7-250ST;ZX7-315ST;ZX7-400ST;ZX7-500ST

For details,please visit our website.

The data in the above table is only for reference. Please subject to the nameplate on the device.

Inverter DC Multi-functions Welder(Cutter)

Model:CAT-312(D);CAT-416(D);CAT-518(D)

[pic][pic]

1.Advanced inverter technology, reduced size and weight, easy to carry.

2.Novel and effective, and low cost;

3. Three functions in one machine, Tig welding, MMA welding and air plasma cutting

4. Compact and easy for operation.

5. “D” Series are for 110/220 duel voltage input, automatic input voltage changing

6. Complete accessories: welding torch, welding cable, earth clamp, welding holder, ,cutting torch ,carton box

|TYPE |CAT-312 |CAT-416 |CAT-518 |

|Input voltage(V,Hz) |AC220(15%，50/60 |AC220(15%，50/60 |AC220(15%，50/60 |

|Input power |4.2 |6 |8 |

|capacitance(KVA) | | | |

|No-load loss(W) |40 |40 |40 |

|Duty cycle (%) |60 |60 |60 |

|Power factor |0.93 |0.93 |0.93 |

|Efficiency (%) |85 |85 |85 |

|Insulation class |B |B |B |

|Protection class |IP21 |IP21 |IP21 |

|Weight (Kg) |9 |13 |13 |

|Size (mm) |371×155×285 |425×205×355 |425×205×355 |

| |TIG |MMA |PLASMA |

|Input |AC220(15%，50/60 |AC220(15%，50/60 |AC220(15%，50/60 |

|voltage,frequency(V,Hz) | | | |

|Input Capacity(KVA) |4.2 |6 |8 |

|No-load loss(W) |40 |40 |40 |

|Duty cycle(%) |60 |60 |60 |

|Power factor |0.93 |0.93 |0.93 |

|Efficiency (%) |85 |85 |85 |

|Insulation class |B |B |B |

|Pulse frequency (Hz) |50-200(MH) |50-200(MH) |50-200(MH) |

| |0.5-2(LH) |0.5-2(LH) |0.5-2(LH) |

|Down slope time (S) |0-5 |0-5 |0-5 |

|Protection class |IP21 |IP21 |IP21 |

|Weight (Kg) |9 |13.5 |14 |

|Size (mm) |371×155×285 |425×205×355 |425×205×355 |

| |TIG |MMA |

|Power voltage |AC220±15% |AC220±15% |

|Power factor |0.93 |0.93 |

|Rated input current |16A |16A |

|No load loss |40W |40W |

|Output current |10-200A; 10-160A TIG |10-200A; 10-180A TIG |

|Housing protection grade |IP21 10 -150A arc; 20-40A cut |IP21 10 -160A arc; 20-50A cut |

|Insulation grade |B |B |

|Max cutting thickness |10mm |14mm |

|Duty cycle |60% |60% |

|Efficiency |85% |85% |

|Power frequency |50/60Hz |50/60Hz |

|Max open-circuit voltage |TIG 54V/arc 54V/cut 230V |TIG 54V/arc 54V/cut 230V |

|Input power capacitance |4.6KVA |8 KVA |

|Gas delay time |0.5-10s |0.5-10s |

|Arcing way |HF |HF |

|Weight |32 kgs |35 kgs |

|Measurement (mm) |625 x 465 x 460 |625 x 465 x 460 |

|Down slop |0.2-5s |0.2-5s |

|Pre flow |0.2- 2 |0.2- 2 |

Mini Inverter Pulse TIG Welder

Model:TIG-160P;TIG-180P;TIG-200P

[pic]

1. Simple design and advanced inverter technology, durable and easy to carry.

2. HF pressure increasing arc initiation and pulsation thermal arc initiation

design, excellent arc initiation performance.

4. Double purposes. Suitable for TIG and MMA of various metals.

5. Unique output characteristics protection design, more suitable for filler wire

welding and the welding point is not black, excellent weld appearance.

6. Minimum welding current is to 5-8A,stable arc suitable for stainless steel plate welding;

7. Various capacity, have pulsation arc welding capacity, adjust the time of

pulsation frequency and wastage, suitable the high quality welding.

8. MMA IS easy arc initiation, stable current and has no noise.

9. Fast, small splash, do not stick to slip, excellent welding appearance.

10.Wide working voltage range, strong adaptability to electricity network, high duty cycle.

11.Portable,easy to carry, suitable for DIY and family use.

plete accessories: welding torch, welding cable, earth clamp, welding holder ,cutting torch ,carton box

|Specification |TIG-160P |TIG-180P |TIG-200P |

|Rated input voltage (V) |AC 220V+10% |AC 220V+10% |AC 220V+10% |

|Output current (A) |10-160 |10-180 |20-200 |

|No-load loss(W) |40 |40 |40 |

|Power factor： |0.93 |0.93 |0.93 |

|Rated input current(A) |16 |18 |20 |

|Insulation grade |B |B |B |

|Max thickness(mm)： |6 |8 |10 |

|Duty cycle (%) |50 |50 |50 |

|Weight(kg) |9 |11 |13 |

|Dimensions(mm) |430x320x205 |430x320x205 |430x320x205 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Inverter Pulse TIG Welder

Model: WSM-250 ;WSM-315;WSM-400;WSM-500

[pic]

1. Simple design and advanced inverter technology, durable and easy to carry.

2. HF pressure increasing arc initiation and pulsation thermal arc initiation design, excellent arc initiation performance.

3. Unique over voltage protect design, avoid the loss for jointing 380V by mistake.

4. Double functions. Suitable for TIG and MMA welding of various metals.

5. Unique output characteristics protection design, more suitable for filler wire welding and the welding point is not black,excellent weld appearance.

6. Minimum welding current is to 5-8A,stable arc suitable for stainless steel plate welding;

7. Various capacity, have pulsation arc welding capacity, adjust the time of pulsation frequency and wastage, suitable the high quality welding.

8. MMA is easy arc initiation, stable current and has no noise.

9. Fast, small splash, do not stick to slip, excellent welding appearance.

10.Wide working voltage range, strong adaptability to electricity network, high duty cycle.

plete accessories: welding torch, welding cable, earth clamp, welding holder, carton box

|Specification |WSM-250 |WSM-315 |WSM-400 |WSM-500 |

|Rated Input Voltage(V) |380+10% |380+10% |380+10% |380+10% |

|Rated Input |9.5 |13 |16.8 |19 |

|Capacity (KVA) | | | | |

|Range of Output |10-250A |10-315A |20-400A |5-500A |

|Current (TIG) | | | | |

|Range of output |10-180A |10-200A |20-315A |5-500A |

|Current (MMA) | | | | |

|Base current range |10-180 |10-315 |20-400 |5-500 |

|(A) | | | | |

|Peak Current (A) |10-250 |10-315 |20-400 |5-500 |

|Open Circuit Voltage |60V |60V |70V |70V |

|Loading Constant Rate |60% |60% |60% |60% |

|Weight (kg) |22 |25 |30 |65 |

|Dimension (cm) |30×50×45 |30×50×45 |30×58×45 |30×50×45 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Inverter AC/DC TIG Welder

Model: WSE-160; WSE-200;WSE-315;WSE-400;WSE-500

[pic][pic]

1.Stable arc, easy to fill in the wire.

2.Pedal control for current. Compact, low noise.

3.DC welding for stainless steel, alloy steel, carbon steel, copper and other color metal, AC welding for aluminum

4. Complete accessories: welding torch, welding cable, earth clamp, welding holder, carton box

|Specification |WSE-160 |WSE-200 | WSE-250 |WSE-315 |WSE-400 |WSE-500 |

|Rated Input Voltage(V) |220V+10% |220V+10% |220/380+10% |380V+10% |380+10% |380+10% |

|Rated input |8 |9 |9.5 |13 |16.8 |19 |

|Capacity (KVA) | | | | | | |

|Range of Out put |5-160A |10-200A |10-250A |10-315A |20-400A |5-500A |

|Current (TIG) | | | | | | |

|Range of output current |5-160A |10-200A |10-250A |10-200A |20-315A |5-500A |

|(MMA) | | | | | | |

|Base current |5-160A |10-200A |10-180 |10-315 |20-400 |5-500 |

|(A) | | | | | | |

|Peak Current (A) |10-160 |10-200 |10-250 |10-315 |20-400 |5-500 |

|Open Circuit Voltage (V) |50 |50 |60 |60 |70 |70 |

|Rated duty cycle |60% |60% |60% |60% |60% |60% |

|Weight (kg) |22 |25 |25 |25 |30 |65 |

|Dimension (cm) |30×50×45 |30X50X45 |30×50×45 |30×50×45 |30×58×45 |30×50×45 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Inverter AC/DC Pulse TIG/MMA Welder

Model: WSME-160;WSME-200;WSME-315;WSME-400;WSME-500

[pic]

1.Quality square wave power supply, stable arc, HF arc stabilization not necessary;

2.Concentrated heat, easy to fill in the wire, especially suitable for wire welding in bicycle industry, etc;

3.Supper strong oxidization film removal capability, continuous and adjustable removal width, and good weld surface;

4.Foot pedal controller connection facilitates welder's operation;

5.Built-in alarming and protective circuits are provided to prevent over currnet, over heat, over

voltage, under voltage, etc and ensure safely operation;

6.High duty cycle, continuous operation without interruption at large current is available;

7.Suitable for welding of various metallic materials such as aluminum, aluminum alloy, carbon steel, stainless steel, copper, titanium, etc.

8. Complete accessories: welding torch, welding cable, earth clamp, welding holder, carton box

|MODEL | WSME-160 |WSME-200 |WSME-315 |WSME-400 |

|Rated Input Voltage(V) |220±10% |220±10% |380±10% |380±10% |

|Rated Input Current(A) |8 |9 |13 |16.8 |

|Rated Input Capacity |3.6 |5.5 |9.2 |11.2 |

|Rated Load Voltage(V) |15.6 |18 |22.6 |26 |

|Output Current(A) |8-100 |10-200 |10-315 |10-400 |

|Rated Duty Cycle |60% |

|Pulse Rate |20-80 |

|Post Flow Time(s) |2-10 |

|Weight(kgs) |15 |25 |34 |40 |

|Dimensions(mm) |370×210×440 |570×360×6000 |570×360×600 |570×360×600 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Inverter DC Semi-Automatic Gas Shielded Welder(flux wire/gas)

Model: MIG-150IC;MIG-200IC;MIG-250IC

[pic]

1. suitable for sheet over 0.8mm

2. cost saving and efficiency improving

3. with wire machine, and easy and considerable for operation

4. high welding speed, high arcing success rate

5. Continuous and discontinuous welding function

6.Automatic voltage pulsation compensation capability

7. Suitable for carbon steel, alloy steel, soft steel, etc, and various wire

8. little spatter, uniform welding pool, good welding shape.

plete accessories: welding torch, welding cable, earth clamp, carton box

|Specification |MIG-150IC |MIG-200IC |MIG-250IC |

|Power Voltage (V) |220±10% |220±10% |220±10% |

|Rated Output Volt.(V) |12.5-20 |16.5-24 |18-26 |

|Output Current (A) |20-150 |50-200 |50-250 |

|Rated Input Current (A) |23.3 |27.6 |28.5 |

|No-load Loss(W)： |40 |40 |40 |

|Power Factor： |0.86 |0.93 |0.96 |

|Duty Cycle (%)： |45 |45 |45 |

|Housing Protection Grade： |IP21 |IP21 |IP21 |

|Insulation Grade ： |B |B |B |

|Efficiency(%)： |85 |85 |85 |

|Weight(kg)： |28 |30 |35 |

|Dimensions(mm)： |570×295×528 |570×295×528 |570×295×528 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

The data in the above table is only for reference. Please subject to the nameplate on the device.

Portable dc arc welder

Please visit our website .

[pic]

The data in the above table is only for reference. Please subject to the nameplate on the device.

DC Compact MIG/MAG Welder(MIG “C” series)

Model:MIG-250C;MIG-350C

[pic][pic]

1.A kind of semi auto welding equipment, compact structure, safe for using ,reliable

2.Automatic welding wire feeding and protective gas transportation

3.Adopting import material ,high efficiency, economical and convenient for operation;

4.Possessing automatic spot welding function; Digital Current and voltage display;

5.Conviniently for repairing, excellent welding performance, low spatter, deep liquid bath, high welding speed, high arc striking rate.

6.Widely used in lines such as automobile manufacturing machinery and equipment construction, ship building, and agriculture machinery.

7.With complete accessories: welding torch, welding cable, earth clamp, carton box

|Specification |MIG-250C |MIG-350C |

|Rated Input Voltage (V) |380±10% |380±10% |

|Rated Input Current (A) |13.0 |21.0 |

|Rated Input Capacity (KVA) |7.9 |13.8 |

|Rated Duty Cycle |40% |40% |

|Rated Output Current (A) |250 |350 |

|Diagram of Wire (mm) |0.8-1.0 |0.8-1.2 |

|Line Inserting Speed (mm/min) |0-11 |0-11 |

|Dimension (mm) |600×380×750 |600×380×750 |

|Weight (Kg) |65 |75 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

DC Separate Mig/Mag Welder

Model:MIG-250S;MIG-350S;MIG-500S

[pic]

|MODEL |MIG-250S |MIG-350S |MIG-500S |

|INPUT VOLTAGE |3-380V/50/60HZ |3-380V/50/60HZ |3-380V/50/60HZ |

|RATED INPUT CAPACITY |11KVA |14.5KVA |25KVA |

|NO-LOAD VOLTAGE | 16.5-37V |18-41.4V |21-53V |

|WELD CURRENT |250A |50-350A |80-500A |

|DUTY CYCLE |165A/22V |207A/24V |316A/30V |

|DUTY CYCLE |214A/25V |267A/27V |408A/34V |

|WEIGHT |123kg |150kg |189kg |

|SIZE(L*W*H) |930*375*780MM |930*385*720MM |960*385*720MM |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Inverter IGBT MIG/MAG Welder

Model:NBC-250A;NBC-350A;NBC-400A;NBC-500A;NBC-630A

[pic]

1.Suitable for sheet over 0.8mm .Cost saving and efficiency improving

2.With wire machine, and easy and considerable for operation

3. High welding speed, high arcing success rate

4. Continuous and discontinuous welding function

5. Automatic voltage pulsation compensation capability

6. Suitable for carbon steel, alloy steel, soft steel, etc, and various wire

7.Little spatter, uniform welding pool, good welding shape.

8. Predefining function It is easy for beginner to handle with digital display of welding characteristic control circuit.

9. Area influenced by hearing is smaller, so welding distortion is much less too.

10.Power source is deeply saved with smaller dimension & lighter weight.

plete accessories: welding torch, welding cable ,earth clamp, carton box

|Specification |NBC-250A |NBC-350A |NBC-500A |NBC-630A |

|Rated Input Capacity (KVA) |8 |15 |24 |35 |

|Rated Input Voltage(V) | 380±10% |380±10% |380±10% |380±10% |

|Rated Input Current(A) |12 |21 |37 |53 |

|Range of Welding Voltage (V) |17-27 |17-31 |17-39 |18-44 |

|Range of Welding Current(A) |60-250 |60-350 |60-500 |80-630 |

|Range of Welding Wire (mm) |0.8-1.2 |1.0-1.6 |1.0-1.6 |1.0-2.0 |

|Rated Duty Cycle |60% |60% |60% |60% |

|Full-load Efficiency |89% |89% |89% |89% |

|Power Factor |0.95 |0.87 |0.87 |0.87 |

|Dimension(mm) |550x315x460 | 550x315x460 |550x315x460 | 550x315x460 |

|Weight (Kg) |24 |35 |45 |66 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

INVERTER PULSE MIG/MAG WELDER

Model:NBM350;NBM500;NBM630

For details, please visit our website:

Panasonic Type CO2/MAG Semi/Auto ARC Welder

NB II(KRII)-200;NB II(KRII)-350;NB II(KRII)-500

For picture, please visit our website:

1. Non-remote controller cable; Better mobility and fewer disconnection

2. Novel dust-prevent design; Widely used Separate electric and voltage control; Simply centralized

3. Adjustment system; Convenient for beginner and practiced hand

4. Unique flip-flop integrated circuit control system; Stable voltage; Little spatter; Easy shaped

5. Suitable for aluminum, copper, stainless steel and carbon steel welding

|Specification |NB‖(KR‖)-200 |NB‖(KR‖)-350 |NB‖(KR‖)-500 |

|Rated Input Voltage(V) |380±10% |380±10% |380±10% |

|No-load voltage (V) |33 |45 |55 |

|Welding Voltage (V) |16-24 |17.5-31.5 |18-39 |

|Welding Current (A) |50-200 |60-350 |70-500 |

|Base current (A) |10-180 |10-315 |20-400 |

|Cooling mode |Fan cooling |Fan cooling |Fan cooling |

|Rated duty cycle |60% |60% |60% |

|Weight (kg) |110 |150 |190 |

|Extera; Dimension (mm) |365×715×690 |365×715×690 |365×715×690 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Foot Operated AC Spot Welder

Model:DN1-10; DN1-16;DN1-25

For more details,please visit our website,

|  Technical parameter: |

|Model |

|DN1-10 |

|DN1-16 |

|DN1-25 |

| |

|Rated Input voltage |

|AC3 80V |

|AC 380V |

|AC 380V |

| |

|Rated capacity |

|10KVA |

|16KVA |

|25KVA |

| |

|Rated input current |

|26.3A |

|42.1A |

|66A |

| |

|Arm length |

|260mm |

|280mm |

|300mm |

| |

|Applicable thickness |

|1.5+1.5mm |

|2.5+2.5mm |

|3+3mm |

| |

|Cooling mode |

|Water cooling |

|Water cooling |

|Water cooling |

| |

|Dimensions (mm) |

|340×800×1140 |

|340×820×1200 |

|340×840×1260 |

| |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Mini Inverter DC Air Plasma Cutter

Model:CUT-30(D);CUT-40(D);CUT-50(D);CUT-60;CUT-80

[pic]

[pic][pic]

1.Advanced inverter technology ,High cutting frequency;

2.With arc maintainence device, applicable to automatical cutting equipment;

3.Touch and untouch arc initiation;

4.Stable arc, long working time.

5.220V Single phase, Portable, Fan-cooled, Thermostatic protection, suitable for DIY and family use.

6. “D” Series are for 110/220 dual voltage input, automatic input voltage changing

plete accessories: cutting torch, welding cable, earth clamp, carton box

|Item\Data |CUT-30 |CUT-40 |CUT-50 |CUT-60 |CUT-80 |

|Power voltage（v） |Single phase |Single phase |Single phase |Single phase |Single phase |

| |220v±15% |220v±15% |220v±15% |220v±15% |220v±15% |

|Rated Input power(KVA) |3.2 |4.7 |6.5 |9 |9 |

|No-load voltage(V) |220 |220 |225 |240 |240 |

|Rated output current(V) |30 |40 |50 |60 |80 |

|Rated output voltage(V) |90 |100 |110 |120 |120 |

|Duty cycle |60% |60% |60% |60% |60% |

|Pilot arc model |HF |HF |HF |HF |HF |

|Burner inter |1.0 |1.0 |1.0 |1.2 |1.2 |

|Diameter(mm) | | | | | |

|Pressure of air |4 |4.5 |4.5 |5 |5 |

|Compressor(kg) | | | | | |

|Thickness（mm） |1-8 |1-12 |1-16 |1-25 |1-35 |

|Weight（kg） |8 |9 |9 |23 |32 |

|Measurement（mm） |390×155×250 |390×155×250 |390×155×250 |510×200×350 |400X550X240 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Inverter DC Air Plasma Cutter

Model: LG-40;LG-60; LG-100;LG-120; LG-160;LG-200

[pic][pic]

1.Advanced inverter IGBT technology ,High cutting frequency;

2.Portability,energy saving ,noiselessness and high reliability.

3.With arc maitainence device, applicable to automatical cutting equipment;

4.Touch and untouch arc initiation;

5.suitable for stainless steel ,aluminum ,copper, titanium, cast iron, carbon steel, alloy steel, alloy metal and nearly all the metals cutting.

6.Stable arc, long working time.

7. Complete accessories: cutting torch, welding cable, earth clamp, carton box

|Specification |LG-40 |LG-60 |LG-100 |

|Rated Input Voltage (V) |Three Phases 380±10% | Three Phases 380±10% |Three Phases 380±10% |

|Rated Input Capacity (KVA) |5.7 |8.6 |15.6 |

|Rated Output Current (A) |40 |60 |100 |

|Cutting Current Range(A) |20-40 |20-60 |20-100 |

|No-load Voltage(V): |240 |240 |240 |

|Max Cutting Thickness(mm) |1-8 |1-16 |1-35 |

|Full-load Efficiency (%) |89 |89 |89 |

|Power Factor |0.96 |0.96 |0.96 |

|WEIGHT (Kg) |18 |25 |35 |

The data in the above table is only for reference. Please subject to the nameplate on the device.

Conventional Air Plasma Cutter

Wire Feeder

[pic][pic]

XMSB-10-F Rigid closed type wire feeder

This type wire feeder is based on our company’ s patented’ dual drive wire feeding mechanism with other following features:

　　1.More wire feeding power, stable wire feeding can be achieved

　　2.Rigid,solid,more durable construction

　　3.All closed type design, dust proof. Good for all severe working Environment

　　Best suitable for fluxed core wire of size Ф1.6,Ф2.0,Ф2.4mm, in petrochemical industry, natural pipeline welding, field jop etc..

　　Variable front adaptor available, compatible with almost all welding torch connection, such as Panasonic, Lincoln, Euro, OTC,.

Import goods quality, local product price, ideal choice for customer.

The data in the above table is only for reference. Please subject to the nameplate on the device.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download