Pflichtenheft



|Recipient |RSO EMEA (Gerard Otterspeer, Harold Van den Oetelaar), RSO AMEC (Steve Tangert; Chris Johnston; |

| |Willem Ryan), RSO APR (Jeffrey Law), RSO China (Leo Chen) |

|Cc | |

| |

|Topic |Bosch VMS Sales Guide |

| |

Background

This document summarizes the Bosch VMS and BVIP design specifications, and is a guide to planning a Bosch VMS system with Bosch cameras and storage. It focuses on Bosch VMS with VRM.

This document is subject to change. Once a new version is published, earlier versions are void.

Design Specifications

This document lists the valid design specifications for version 4.5.x You require an updated version of this document to commission sales for a more recent version of Bosch VMS.

1 Datasheet facts

|Subject |Management Server (MS) |Enterprise Management |

| | |Server |

|Management Servers |1 |10 per Enterprise User group |

| | |30 per Enterprise User group, if each MS < 100 |

| | |channels. |

|Encoder inputs, cameras and decoders |2.000 |10.000 per Enterprise User group |

|summarized | | |

|Enterprise User Groups/ User Groups |n.a. |20 with overall max. 1000 users |

|User Groups |20 with overall max 1000 users |Same as MS |

|Workstations connected in parallel |100 |100 |

|Decoders in total |128 |Same as MS |

|IntuiKey Keyboards connected to decoder |60 |No Enterprise functionality. Per Management |

| | |Server only |

|Keyboards connected to workstations (IntuiKey|1 per workstation, hence 100 in total |100 |

|or Videotec DCZ) | | |

|Logbook |4GB (6 Million Entries) |Same as MS |

|VRM |Tested with 40 |Same as MS |

|For legacy with H.263 only: |4 max. |Same as MS |

|Primary NVR / Backup NVR | | |

|For legacy with H.263 only: |4 |Same as MS |

|Failover NVR | | |

|DiBos / BRS |Tested with 100 |1000 |

|DVR (400, 600, 700) |15 |Same as MS |

|POS/ATM |15 |Same as MS |

|Virtual Inputs |4.000 (limited in configuration) |Same as MS |

|AMG |16 with max. 50 cameos per AMG (limited in |No Enterprise functionality. |

| |configuration), while maximum of 128 decoder in|On Management Server only |

| |overall system | |

|Task Schedules |200 (limited in configuration) |Same as MS |

|Compound Events |1000, up to 10 devices per compound event |Same as MS |

|Special Days |24 |Same as MS |

|Export ASF |“1 minute of exporting ASF (4 cameras) takes 1 |Same as MS |

| |minute” | |

|Export |Max 4 cameras in parallel |Same as MS |

|Maps |40 maps maximum |Same as MS |

|Allegiant CCL commands |Max 10/sec |Same as MS |

|Mobile Video Service (MVS – Web Client / IOS |20 connections per MVS. |No Enterprise functionality with remote access.|

|Client) |(1 connection per device |Should be used in the same LAN. |

| |1 connection per cameo). | |

| |E.g. 5 Ipads with quadview: 5x4=20 connections.| |

2 System facts

• WIN7 SP1 (64) & Server 2008 R2 requested

o Exception: NVR

• Enterprise Management Server requests 4 GB RAM

• Op-Client with Enterprise capabilities requests 4 GB RAM (8 GB recommended!)

• All IP devices must be associated to 1 Management Server. IP devices must not be shared between multiple Management Servers

• IP-Cameras, -Encoders and -Decoders must not be shared with other systems. For temporary migration reasons VIDOS and BRS can stream video from IP cameras or encoders in parallel to BVMS, but be aware of overloading the encoder

• Bosch VMS does not support connection to BVIP devices through HTTP, HTTPS, or other encrypted connections (e.g. AES). Changing the rcp+ port is also not supported.

3 Remote access

• Bosch VMS 4.5 supports connection across Wide Area Network (remote access) from an Operator Client to a Management Server and all devices managed by it.

[pic]

o Devices and Management Server have to be in the same Local Area Network (LAN)

o Minimum bandwidth required within that LAN are 100Mbit/s

▪ Remote access of devices to the Management Server are not supported

o Minimum bandwidth required between remote site and local site is 300 Kbit/s

• Transcoded video

o Enables to BVMS OC to operate within low bandwidth (>=300 kbit/s) networks

o Transcoder is available for Live and Playback for VRM connected BVIP cameras.

o If no transcoder sessions or transcoder HW is available on the VRM no image will be displayed in OC.

o Transcoded videos are selected by Operator per device.

o Transcoded video is indicated by an icon in cameo.

o Bosch VMS supports the transcoder service within the internal transcoder of the VRM installed on DIVAR IP 3000/7000 as well as DIVAR IP 2000/6000.

o In addition the external transcoder VJT-XTC XF is supported as well

o Transcoding services are managed by VRM

▪ Not configurable or shown in BVMS

o Following operations are not supported by transcoded video

▪ Delete Video

▪ Protect/Unprotect Video

▪ Authenticate Video

▪ Export Video

▪ Forensic Search

4 Limiting facts

• Enterprise Management System

o Analog Monitor Group is not supported across different Management Servers

o Monitor Wall:

▪ Cameras of subsystems can be connected to monitor wall configured in Enterprise Management Server only

▪ No pre-configuration of sequences with cameras from subsystems

o Remote cameras or cameras using transcoded streams are not supported on monitor wallBIS - BVMS connectivity is not supported across different Management Server

o Mobile Video Service (Web Client / IOS Client) is not supported across different Management Server

o Map does not indicate cameras of different Management Servers on one map

• Monitor Wall:

|  |Usage in |Usage in |Assign via D&D in OC |

| |Local OC |Enterprise OC | |

|Axis |M7014 |4-channel NVT |5.40.7.1 |

|Axis |P1347 |fixed camera |5.40.9.2 |

|Axis |P5534 |PTZ |5.40.9.2 |

|Axis |Q1604 |fixed Camera |5.40.3.2 |

|Axis |Q6035 |PTZ |5.41.1 |

|Sony |CH240 |fixed camera |1.50 |

|Sony |CH280 |fixed camera |1.50 |

5 Calculations

• Encoding of IP encoders and cameras is limited and must under no circumstances be overloaded. To check if the required resolution, IPS and streaming values are achievable, check VRM calculation excel sheet.

• Storage must be calculated taking iSCSI sessions, RAID levels and internal buffer into consideration. In order to calculate the required storage for certain video bandwidth levels and retention times, use the VRM calculation excel sheet in its latest available version.

6 Further design information

• For system examples please refer to Bosch VMS Blueprints

• Bosch VMS requires an extension of the Software Maintenance Agreement after 1 year of License Activation in SLMS. Without a valid SMA, the system is not covered by Technical Support and will not receive upgrades to future revisions.

• Upgrading to 4.5 requires a valid SMA.

New purchases have one year of SMA included, hence activations after April 8th 2012 will still be able to upgrade.

Installations that activated before April 8th 2012 are required to extend the SMA.

7 Compatibility BVMS Rel. 4.5.5

Bosch VMS 4.5 has been tested with the following SW/FW versions:

♣ Firmware MPEG-4: 4.15.02

♣ Firmware CPP3: 5.70.0039

♣ Firmware CPP4: 5.70.0039/5.80.73

♣ Firmware CPP5: 5.70.0028

♣ Firmware CPP-ENC 5.52.0015 (for VIP X16000 XFM4)

▪ Firmware CPP-ENC 5.60.0061 (for VJT XF family)

▪ Firmware X1/X2: 2.53.05

▪ Combined Firmware 5.80.0625 (CPP3, CPP4, CPP-ENC)

▪ VRM: 3.00.48

▪ VSG: 5.60.55

▪ BRS: 8.10/8.11

♣ BIS: 3.0

♣ iOS: 6.1.2

♣ Allegiant MCS: 2.92.0.1

♣ Intuikey Keyboard: 1.96

♣ VMWare: 5.1.0

♣ DVR 2.1 / 3.60

• VideoSDK: 5.61.42

Latest compatibility matrix will also be available at the IPP – Web-page:

ST-ESS/PRM

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download